starting again... after two and a half.

Similar Questions

• Warranty start date shows two and a half months too early

  HP Jet 7 Tablet - 5709. Tablet received 24/01/15 and I signed it that day. When I go to my page to check the warranty and enter my serial number, it indicates the date of start of guarantee a November 5, 2014.  When I wrote to HP Support, my answer States (case: edited by moderator): "Support case manager is not available at this time for HP Stream 5709 7 Tablet."

  I'm confused.  All I want is the correct date for my tablet. Who should I contact to get this resolved?  Thank you

  HI @BAGS7 ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn about this here.

  Kind regards
  George

• Laptop HP Pavilion 2320DX g4: computer hp laptop pavilion g4 does not start successfully after update and return to windows 8.1

  Hi, I have recently updated my laptop to Windows 10. He had so many problems and I didn't like it at all, so I just returned my laptop to Windows 8.1.  Since then, my laptop does not correctly every time, and the fan immediately starts to work as well. I can start my pc and connect to my home screen each time.  If the tile is moving or light up when I move my cursor, then I know that I can use my laptop for a little while. It can freeze after getting out a good program. Other times when I start my laptop, everything is dead except for logging on my screen. My Windows key on the keyboard does not work most of the time.  If the screen does not respond the first time I turn, as described above, I can't absolutely nothing on my pc. I can't access the search bar by moving the cursor to top right, I can't open the tiles, I can't spend in desktop mode, etc.  Front I upgraded to Windows 10 and downgraded to 8.1 all worked perfectly, because I've updated from 8.0 to 8.1 Windows almost 2 years.  I have a defective battery. in fact I can only use my laptop if it is plugged. My fan is constantly going, but I don't know if it's my loss of battery or what's wrong with my pc now.  I have described my problem in the Microsoft community forum but have had little response that was not helpful. I was told to go to the command prompt and put in DISM: scan now (which also contained letters more than that, but I do not remember all). I followed the instructions and for 2 days, my pc seems to do better. Then he returned to this problem again. I hope you can help me.  If you have additional questions, post here or please email me at [removed personal information]. Thank you!

  DEB

  @DWESTDEWITT,

  Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

  If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

  Thanks again for posting and have a great day.

• my laptop stops automatically and randomly and start again after pressing the power button / stop

  Hello

  my laptop stops automatically and randomly and restarts after pressing power button.my pc running windows 8 version of system.can you please solve this problem.

  Hello

  Check if the quick start option is enabled, your laptop. Here are the steps:

  1. open the Power Options window. Use one of the following methods:

  A. press the WIN + R keys at the same time to launch the Run dialog box. After that, type powercfg.cpl , and then press enter.

  B. press the WIN + X keys at the same time to launch WIN + X Menu. After that, select Power Options.

  C. the Start screen and the Windows of type power will show the results, select the Power Options.

  2. click on settings , then choose change how the power buttons.

  3. scroll down and look for turn the (recommended) quick start under stop settings.

  4 uncheck the checkbox, and then click save changes.

  Note: if the option has said isn't here, scroll down and select change settings that are currently unavailable to change.

  5 restart your laptop.

  Let us know how it goes.

• Firefox will not start even after uninstal and reinstal

  I was using Firefox normally. I shut it off for awhile then I would never open again. I uninstalled and reinstalled and it did not fix the problem. I deleted the program files and profile records and reinstalled again... same thing. When I run it, the rotation slider works for awhile then goes back to the arrow shape. I have no more details to give.

  Thanks to Cor - el, that put me in the right direction. My problem wasn't with any security system, but with software that has been installed in my computer without my consent. I found it through all the applications in the window settings and programs. The culprit is "Interenet optimizer" (named exactly like this). After uninstalling this guy, my Firefox started without any glitch.

• How do what has been on my computer out of it and start again on windows and my computer runs faster it is really slow runing

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Programs, you experience problems withi want to start my computer arase evrything cool then restart windows as when I bought the computer
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you really want to delete "all" of your computer, you must (a) execute any system recovery was provided by your computer manufacturer to restore the computer to its factory costs State or (b) do a clean install of Windows.

  Doing a clean install of Windows is a fairly drastic (and often unnecessary) step.  Don't forget that if you are doing a new installation, you need to reinstall applications that you may have, for example, Microsoft Word, Excel, etc. You will also need the appropriate drivers for your hardware.  Maybe a driver CD was provided with the purchase of the computer or you may have to download the drivers (before we do to reinstall it) from the web site of the manufacturer of the computer or the manufacturers of various components.

  http://michaelstevenstech.com/cleanxpinstall.html

  http://www.theeldergeek.com/clean_installation_of_windows_xp.htm

  Making a recovery of the plant is only a little less drastic than a clean install.  If you have and take the option to perform a recovery of the plant, will be again loaded applications that were previously loaded on the computer when you bought it, but any application that you have installed later will have to be reinstalled.

  In both cases, you will need to restore from external backup all of your data (documents, music, photos, etc.).

  If you are unsure whether or not the option (a) is available, identify the make and model of your computer.  (B) is only available if you have a real (with hologram) Windows XP installation CD.

• Receive lots of BSOD due to ntoskrnl.exe, they stopped, but started again after a month

  I get lots of BSOD. I installed "WhoCrashed" and analyze the dump files. Here's what he said:

  Saturday, October 3, 14 17:29:30 GMT PM your computer crashed
  crash dump file: C:\Windows\Minidump\031014-15147-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B80)
  Bugcheck code: 0x4E (0 x 0x2007E, 0 x 2, 0 20075, 99)
  Error: PFN_LIST_CORRUPT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that the page frame number (PFN) list is corrupted.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem. This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  I have this problem for a long time. I've updated the drivers, windows updates, no effect. But, for some reason, he did not seem since February. But Monday, I used MiniCygwin_GOptimize_v1.34.02 to compress files apk android. He uses a lot of CPU. And after that the BSOD began to reappear. I downloaded the Minidump file and Information System if someone wants to check.

  Let me know the reason for these BSOD and how can I solve this problem.

  Hello

  We have many bug different controls:

  PFN_LIST_CORRUPT (4th)

  This indicates that the page frame number (PFN) list is corrupted.

  This error is usually caused by a driver passing a list of descriptor of bad memory. For example, the pilot could call MmUnlockPages twice with the same list.

  MEMORY_MANAGEMENT (1A)

  This indicates that an error occurred serious memory management.

  Error checking 1A, {5003, fffff780c0000000, 6933, 64ba0002d266}

  -1 setting of the bug check is 5003 which lists free work is corrupt. It is probably a hardware error.

  We also have another 1st parameter:

  Error checking 1 a, {fffff6800005cf40, eab00001beb34867,403, fffff6fc00df59a0}

  - Parameter 1 of the bug check is 403 which indicates the page table and NFPs are out of sync. It is also probably a clerical error.

  ^^ Pointed out that both of the above can still be caused by a driver causing corruption, but it is generally unlikely.

  And another...

  Error checking 1A, {41284, 159a0e001, 104 d 57, fffff70001080000}

  -1 setting of the bug check is 41284 indicating a PTE or the fixed work list is corrupted.

  BAD_POOL_HEADER (19)

  This indicates that a pool header is corrupt.

  Error checking 19, {20, fffff8a00b91df40, fffff8a00b91e020, 50e040c}

  6: kd >! pool fffff8a00b91df40
  Pool page fffff8a00b91df40 region is unknown
  fffff8a00b91d000 size: 4 d 0 previous size: 0 Ntff (allocated)
  fffff8a00b91d4d0 size: 30 size: 4 d 0 PfFK (allocated)
  fffff8a00b91d500 size: 30 size: 30 PfFK (allocated)
  fffff8a00b91d530 size: 10 previous size: 30 (free) NtfE
  fffff8a00b91d540 size: 30 size: 10 Ntf0 (allocated)
  fffff8a00b91d570 size: size previous 10:30 (free) Nbmc
  fffff8a00b91d580 size: 40 previous size: 10 DxgK (allocated)
  fffff8a00b91d5c0 size: c0 size previous: AfdX (protected) process (allocated) 40: fffffa801098c7f0
  fffff8a00b91d680 size: 170 previous size: c0 MPsc (allocated)
  fffff8a00b91d7f0 size: size previous c0: 170 FIcs (allocated)
  fffff8a00b91d8b0 size: 40 size: c0 (allocated) NtFs
  fffff8a00b91d8f0 size: 30 size: 40 (allocated) PfFK
  fffff8a00b91d920 size: 30 size: 30 Ntf0 (allocated)
  fffff8a00b91d950 size: 150 size: 30 FMfn (allocated)
  fffff8a00b91daa0 size: size 160: 150 FMfn (allocated)
  fffff8a00b91dc00 size: 40 size: 160 (allocated) MmSm
  fffff8a00b91dc40 size: c0 size previous: 40 FIcs (allocated)
  fffff8a00b91dd00 size: 10 size: c0 sect (free)
  fffff8a00b91dd10 size: 170 previous size: 10 MPsc (allocated)
  fffff8a00b91de80 size: size previous c0: 170 (allocated) NtFs
  * fffff8a00b91df40 size: size previous e0: c0 (free) * FIcs
          PoolTag FIcs: Context of FileInfo FS-Filter binary stream: fileinfo.sys

  ^^ Block of pool who looked in the page pool belongs to the context of FileInfo FS-Filter flow. This is related to the file system.

  6: kd >! poolval fffff8a00b91df40
  Pool page fffff8a00b91df40 region is unknown

  Validation of the headers of pool the pool page: fffff8a00b91df40

  [Fffff8a00b91d000] page pool is __inVALID.

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  2: kd > fffff960000a874f ln
  (fffff960'000 a 8720)   win32k! NextOwnedWindow + 0x2f |  (fffff960'000 a 8770) win32k! xxxRemoveDeleteMenuHelper

  ^^ The exception is produced in win32k! NextOwnedWindow.

  -----------------------

  Overall, this looks like the faulty RAM. It's not like there is a foul-smelling waters driver causing memory corruption here, but it is possible. The reason I mention this is because I see it in the crash dumps after dumping the! v

  OVERLAPPED_MODULE: Address overlap 'WinUsb' and 'ssudbus.sys'.

  ^^ WinUsb.sys - pilot class USB Windows system, it is a part of Windows. ssudbus.sys-

  SAMSUNG USB Composite Device Driver. Probably a part of Samsung Kies. Uninstall everything that you can find this topic.

  -----------------------

  Please run Memtest for NOT LESS than 8 ~ (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• Installation of Windows 7 starts again after the reboot

  I have a Dell 420 Computer and try to install it on Windows 7 Home Premium.  Installation disk asks me the usual questions and then crosses the installation process.  When it's done, it restarts my computer, but instead to put Windows 7, it starts the installation process more.  I need help.

  I have a Dell 420 Computer and try to install it on Windows 7 Home Premium.  Installation disk asks me the usual questions and then crosses the installation process.  When it's done, it restarts my computer, but instead to put Windows 7, it starts the installation process more.  I need help.

  When it restarts and says press any key to boot from the disc - do not press any key, just let it continue. If you press a key, the process will start.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• I have a Mac Book (2006), all my emails since two and a half years have the same date. How to bring back the original dates?

  Of 'date and time' I tried to drag the month and year of my menu bar. He did not stay, I did several times, but nothing helped. I closed the window and went back to my Thunderbird email to see the date, I tried to use became the date in the column "date of receipt" of all of my emails back for 2011. I changed the date a few days later, and then the date is changed on all my emails. I want to cancel everything I done the dates so that the emails show when they were initially received. I managed to get "the order received" which helps a little, but I don't see the original dates.

  I checked "set date and time automatically", but it does not change the dates on my saved emails.

  Of 'date and time' I tried to drag the month and year of my menu bar.

  Is this something Mac?

• I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

  I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

  Hello david.hogan87,

  Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

  Have you checked every device to confirm that the same identifier Apple is signed all three?

  iPhone and iPad: head to settings > iTunes and App Store

  iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

  If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

  Best regards.

• After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  Sounds like an Energy Saver preference, but what computer do you use?  A G5 (PowerPC) machine will not work on El Capitan.

• Satellite A30 was the subject of a cutting and does not start again

  Hello

  In the past two months my Satellite phone has been 'cut' operating environment. It seemed to me that the cooling fans were constantly running at high speed and the air coming out of the (output) rear was warmer then normal.

  I visually inspected the ports of entry at the bottom of the envelope and they do not appear to be blocked by dust or whatever it is. Yesterday, during 'Disc clean-up', he cuts and just wouldn't start again.

  When I try to start the system, the following events happen: first, the "Toshiba" appears as always and then after a few seconds it replaces the logo 'loads Windows' as usual. Then after a few seconds it makes a funny 'click' sound, a blue screen appears for a split second and the system stops again.

  My initial problem could have a overheating? If something has been permanently damaged now?

  I would appreciate any input!

  Hello

  First of all, please give us more details about your model of laptop. It is always important.

  > After a few seconds, he made a funny sound "click", a blue screen appears for a split second
  Looks like a malfunction of the drive HARD and do not overheating what do you think?

  Have you tried to format the whole HARD drive and reinstall the OS from the restore CD? In my eyes, you should first check this possibility.

  But as you probably know nothing is impossible in the word computer laptop and wide. ;) then maybe it s overheating in such a case, the laptop must be professionally checked by a qualified technician.

• Windows 8 buggy again after many problems and refreshes.

  Hello, this has been my third discount over the last 2 weeks. Windows 8 always worked fine for me until about 2 weeks ago, when he got into a loop of auto repair after a reboot.  I tried everything to fix it and finally I had to update Windows.

  After that I finally managed to install most of my programs lost and began to enjoy my PC once again, suddenly the Windows Explorer crashed and began to close and restart all the time. When I tried then auto repair, it remained stuck in another loop, this time with a nice BSOD at the end I searched a lot on the internet and I tried everything I can to remedy this, but finally I had to réactualisiez.

  After this refresh Windows seems to work perfectly, and better than ever before, I could even install some updates, that I was not able to install before because of some kind of bug. Then after a certain update that upgrades to Windows 8.1 appeared in the app store. My first attenpt to install failed, so I googled the error code upward and run the update during a clean boot with updated graphics drivers. The update failed, but this time my internet connection is completely. After some research, I discovered the autoconfiguration service WLAN could not be started due to error 193: 0xc1. I tried all possible ways to fix that I found on the internet, but nothing has worked. Finally I have a third update of despair.

  Given that the update, I can't sem to be able to install half the updates and all click on boxes of the metro interface miss the text. When I tried to contact Microsoft support, I discovered my product id is "unavailable" and everything is just very bug.

  So, what should I do now? Perhaps yet another Windows refresh help? Is there meaning to perform a new installation? Is this necessary?

  I also finally have windows 8.1.

  Table of contents of the double thread:

  A clean installation resolves all possible hard disk problems?

   
  Hello, I had a lot of trouble with my PC for the past 3 weeks, including the BSOD and other kinds of bugs and crashes. I described most in this issue:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/Windows-8-buggy-again-after-many-problems-and/7618aacf-7503-44ed-a3ff-ebe0d6823832

  Now everything seems to work again fine, but I get several kinds of problems. When I tried to install the video card drivers that my computer kept freezing, most Metro applications turns off after opening, some programs do not start sometimes and I get a lot of other mistakes. My computer needs correct the mistakes of hard drive several times a day.

  Everything points to the failure of the hard drive. However, I use an SSD. I don't know if this changes anything though.

  Then my last question was a clean install would stop all this evil for good? And if not, what might help?

  I just wanted you to know that I finally discovered the cause of the accident. Because those made completely inaccessible Windows, I couldn't dump files. But after each clean install Windows crashed after I installed a bunch of software. But I was not sure what software it is, so I made a wrong bet, and my computer crashed again.

  So, after that 2nd clean installed, I searched for accidents with the program I knew most, Deamon Tools. Each accident came when I restarted the computer after a session, I have installed or used Daemon Tools in. And indeed, it turns out be known to cause a BSOD. However, that sounded weird to me, because I used it for many months and never the source of problems.
  After that my 3rd installed clean, I decided to restart my computer after each program I have installed, in the case of another wrong bet, but do not install Daemon tools. And now, while I tap on my beloved PC, it works very well with all my software, with the exception of Daemon Tools.
  I also red published there also with pretty much every other ISO mounting program on Windows 8. No idea how to mount the ISOs anyway? (Edit: oh, it seems that Windows 8 is a built-in ISO film editor.)

• How come back initially on an editing session without closing the entire program and start again?

  How come back initially on an editing session without closing the entire program and start again?

  Hello

  There are two answers to this. If you have not saved the image since the opening, you can restore the file Menu-Revert or F12 and that will bring back you at the beginning. A more elegant solution is the historical Panel.

  Photoshop has a history panel (Windows Menu-history) that keeps track of everything you do on an image and allows you to go back in the flow of work and in effect then go ahead if you change your mind. The original image is always registered as a snapshot and then subsequent action recording. So you can come back not only the original image, but any previous change after opening. You can even take your own snapshots which is a useful feature.

  Hope that helps

  Terri

  

• every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > Connect wifi > my iphone doesnot ask me activation lock even if my unit is also found on

  every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > wifi connection > my iphone doesnot ask me lock activation that says that your iphone is connected with the old apple ID, please enter the id and password

  I always reset on find my optional equipment please tell me how to activate locking activation so that whenever I have factory reset my phone with finding my camera so my phone always ask an old apple and password

  I do not understand your question, but let me go with what I believe. Looks like you entered in iCloud and erased all the content and settings on the iPhone, and once you go by assigning back up again, you do not see something that you expect to see, for example, a request for an Apple ID. When you go through the installation process to select the language, etc., it must, at some point, ask you to identify yourself with your Apple ID. are you not see this?

  It would be better if you try to describe exactly what you do again. Also, without the help of any sign of punctuation, it is difficult to track everything you ask. Try providing the steps of what you do, and then what you see when you get to the point that you believe that something is going wrong. You mention both an old and new Apple ID, which is rather confusing.