Watch USA/UK compatibility

Similar Questions

• Hi people. Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Hello

  You will be able to use the watch in Europe.

  There is no regional differences in the hardware and the software can be configured to your chosen region. The supplied USB power adapter will have to pine trees located in the United States. A travel adapter will allow you to connect it to the European outlets.

  Alternatively, you can buy an Apple USB power adapter that is located in your country of destination / country.

  For example:

  • 2-pole:
    • http://www.Apple.com/FR/shop/product/MD813ZM/A/Adaptateur-secteur-USB-5-w-Apple? FNODE = 83
  • UK 3-pin:
    • http://www.Apple.com/uk/shop/product/MGRL2B/A/Apple-5W-USB-power-adapter-folding - pins? FNODE = 83

• Impossible to delete the mail.

  I recently got e-mail from someone I know watch USA... but it cannot be deleted.

  The message of the computer says... the 11416.emix file could not be opened because there is no file.  I can read the mail, so I don't need to open it again; I now just delete.   Has anyone met this before?

  I finally solve this problem by reconstructing the mailbox, but there are always weird situations that occur.   For example, I find that I often to the Remove of the Inbox and trash twice.    Anyone knows what are the settings may be the cause?

• Satellite Installation SSD Pro R50-B-122

  I have a R50-B-122 and BX100 Crucial 256 GB SSD I want to ride. Crucial to say that this SSD is compatible: http://www.crucial.com/usa/en/compat...-pro-r50-b-122

  My first attempt was to mount the SSD drive and install Windows 8.1 from scratch, but I get the 'no hard drive was found. Click on load a driver to provide a driver for installing mass storage. "error, which is also stated in this thread: https://forum.toshiba.eu/showthread...missing-driver

  I tried to burn a CD with the Intel storage drivers on it and the drivers get used when you try to install, but it does not always help to detect the drive. I've already updated the BIOS of the laptop, and the SSD firmware, I tried all combinations of parameters relevant BIOS - read elsewhere it looks that the reader must be set to battery saving mode and CSM.

  My next test was to clone the HDD to the SSD which I did using Paragon Backup. I was able to start my cloned PC's SSD desktop computer so I know that it went well, but still no detection in the laptop.

  It seems that the BIOS is not able to detect the SSD. Any ideas on what we can do? This laptop would greatly benefit from an SSD, and I'm not sure I can deal with the speed of the 5400 RPM HARD drive.

  It seems that the BIOS is not able to detect the SSD.

  The SSD drive is listed in the first page of the BIOS? In the event that the BIOS would recognize the SSD correctly, you should see name/size of the SSD drive on the first page.
  If it is not listed, the SSD it has not been recognised by the BIOS... why? I guess because of compatibility issues...
  In this case, I have no other recommendation for you to use another disk SSD...

• Portege Z30-A-10w: Win 7 BSOD after upgrade SSD

  Hello

  I am wanting to upgrade a laptop Toshiba-Portege-z30-a-10w of company SSD 128 to 512 SSD
  However when loading windows 7, it crashes when connecting with a blue screen error 0x00000001

  The SSD 512 that I use is
  http://www.crucial.com/USA/en/storage-SSD-M550

  and according to the
  http://www.crucial.com/USA/en/compat...Tege-Z30-a-10W

  It is compatible with the Toshiba portege-z30-a-10w
  I've updated the BIOS of the laptop to V4 30/04/2015 (which to my knowledge is the most recent)
  http://www.Toshiba.co.UK/innovation/...jsp?service=UK
  Moreover I have updated the firmware on the SSD 512 to what, in my view, is the last
  MU02 version
  http://www.crucial.com/USA/en/support-SSD
  However I still get the same problem with Windows 7 to break with a blue screen just before the opening of the session.

  All ideas

  Thank you
  David

  I've never managed to install Windows 7... but I installed Windows 8 and goes on well...

  I have no why, but install Windows 8 seems to allow the 512 SSD to use

  Hope it will be useful.

  David

• CPU has been disabled by the guest operating system error

  Running VMPlayer 3.1.3 version 324285 build on Windows 7 Enterprise 64 bit with 8G of memory.

  When I try to install some VMs based on Linux of ISOs, in a few seconds, I get the error:

  "The CPU has been disabled by the guest operating system. You must turn off or reset the virtual machine at this point. »

  (See also the screenshot attached)

  This happens on other ISOs based on Linux/Windows. I googled the web & VMTN, but have not found relevant

  answer my question.

  Thanks in advance

  Alex

  Hello

  What operating system is tryining install you?

  Take a minute to watch in VMware Compatibility Guide: search guest conductor /and try to upgrade to a version 3.1.4 If your system does not support the direct execution of 64-bit.

  Concerning

• VMware ESX4 Test Laboratory

  Guys,

  Can someone advise on a Board of good mother for the execution of ESX4, I will get a chip Intel Q8400 that I need to run 64-bit operating system in the lab, I was watch the hardware compatibility list and the chipset Intel ICH7 or ICH10 chipset look like they support the SATA onboard, I would prefer that it I could find one with a network card intel network as well which is supported, allowing 6 or 8 Gig or ram as well.

  Any advice is welcome as to what everyone else has built. My budget for the PC is £300-£400, registration, CPU, Ram 6 or 8 GB, card mother and 2 or 3 hard drives, one for the other (s) of the operating system for the virtual machines and images.

  Many thanks - John

  John,

  a good place to look is http://www.vm-help.com.

  Discover their ESX/ESXi Whitebox HCL

  André

• Spell check on the wrong language

  Hi all

  My Mac AI CS4 spelling dictionary is defined in Bulgarian. I don't know how it happened, but I can't seem to find a place where I can change it back.

  Preferences > hyphenation English watch (USA) as the value.

  Help, please!

  Thank you

  Select your text and open the character Palette. For pre existing texts, the dictionary takes the information from the language of this palette. Change to what you need.

  It is so useful because you can have different languages in a block of text and check spelling in one step. Click on the image to see it larger

  

• Apple Watch country Compatability

  Would a Apple Watch series 2 purchased in the USA work & fully compatible for use in the UK?  The reason I ask is I'm in the United States from Saturday next and that could save me a lot of money.

  Hello

  You will be able to use the watch in the United Kingdom.

  There is no regional differences in the hardware and the software can be configured to the United Kingdom.

  The supplied USB power adapter will have to pine trees located in the United States. However, you can load the watch in the United Kingdom using the Apple USB power for your iPhone adapter. Alternatively, you can buy an adapter as a separate accessory:

  • http://www.Apple.com/uk/shop/product/MGRL2B/A/Apple-5W-USB-power-adapter-folding - pins? FNODE = 83

• Passport blackBerry compatibility: bought in the USA for use in Germany

  Dear team,

  I would buy the passport in the USA and ship it to Germany to use it here. I am a customer of O2 Germany and would like to buy the smartphone in the United States, because it's cheaper here. I would like to know if there are compatibility issues, if I want to use the phone in Germany, with a plan provider and service of the German price.

  Can you help me with this question means?

  Kind regards
  PrimeSecurity

  Hello!

  To ensure compatibility, I recommend to contact your wireless provider and asking them if the device works on their network. For more information on networks supported by BlackBerry passport that your wireless provider will want to know check out the page of specifications found here. I hope this helps!

• Apple Watch Group compatibility

  Hello world

  I have a Apple Watch Sport 38mm (1st gen). I was about to buy series 2 Apple Watch soon and I was wondering if my old Apple Watch Sport bands would be compatible with my new Apple Watch series 2? If anyone can let me know I would appreciate it a lot.

  Hello

  Yes, they would.

  All strips of Apple Watch, past and present, will be to adapt any Apple Watch of the same size of the case (42mm or 38 mm).

  To clarify, series 1 does not refer to your existing, first generation watch. He referred to a new Apple Watch model that has the same characteristics as the original Apple Watch, with the exception of a new dual-core processor.

• Compatibility Apple Watch

  My Apple Watch IS compatible with OS3?

  All watches Apple can run Watch OS 3.

• Compatibility of Apple Watch series 2

  I wonder if the new Apple Watch is compatible with the iPad mini. I have a laptop just an iPad with LTE. I rarely use the phone (do not need to use it when I M out and all), but I could certainly use this watch for organization and health applications.

  The first generation was only compatible with a phone, it is very likely that the 2nd gen will be as well.

  If you scroll all the way down it says that it requires iPhone 5 or later

  https://www.Apple.com/Apple-Watch-series-2/

• Smart Watch SW3 compatibility

  SW3 smart watch can only use with my Xperia S. I know that the experience will be less. But it is quite inconsistent, or it can work. ???

  No, SW3 needs Android 4.3 and Xperia S got only 4.1.2.

• Compatibility with 61 (USA) and 301 (UK)

  Hi, I purchased a 4500 envy to the United Kingdom and it uses print cartridges 61.  I live in Antigua and have friends who came to the United Kingdom but they cannot get 301 cartridges, they will work in my printer?  Have you read somewhere, you will need to contact HP to reset the printer?

  Thanks in advance for the help

  Looks like this query is resolved...

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/301-and-61-cartridge-compatability-DeskJet-3050-J610A-UK/m-p/3531733