Watch you the 20141 updated - it creates new problems

Similar Questions

• What is the component used to select contact in the field "to:" when create new sms on BB OS 4.6?

  Does anyone know which component is used to select contact in the field "to:" when create new sms on BB OS 4.6? What is KeywordFilterField? If yes - how to customize it to make it look like the sms app? Can you give us some examples of code? I'm new in development for BB and I need this functionality in my application.  I will be very appreciate for any help!

  You will need to implement your own field full auto in this case.

• When I tried the update of lightroom cc2015 I get a U44M2P7 error message. I tried to rename the file update and a new attempt and also update manually but still the same error. I use a mac with os x El Capitan version 10.11.3 any suggestions would be gra

  When I tried the lightroom cc2015 update I get an update of the failure U44M2P7 error message. I tried to rename the file update and a new attempt and also update manually but still the same error. I use a mac with os x El Capitan version 10.11.3 any suggestions would be greatly appreciated.

  U44... Update error http://forums.adobe.com/thread/1289956 can help

• I get an error 643 since April and unable to install an important update. I tried to download the update, but your instructions on the Web are very confused. It's the only update that gave me problems.

  I get an error 643 since April and unable to install an important update.  I tried to download the update, but your instructions on the Web are very confused.  It's the only update that gave me problems. Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://support.Microsoft.com/kb/KB976982

  You receive the error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem, repost in the appropriate Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• on windows xp, my system restore to a previous restore point. have you tried many restore points & creating new ones but the system does not restore. all the solutions out there?

  on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.

  Let see... What do we know about your system environment:

  It's windows xp.

  If we knew more, you would probably now.

  What is the problem that you are experiencing this thing you System Restore will be remedied?  System Restore is not a time machine.

  The system restore already worked successfully in the past?

  Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

• Need to remove the old account from creating new a new Internet service provider. TB31.

  New VAC .the see my old address 'Reply', forward, & "write". -Usually very inconvenient. -You should be able to remove the old according to that ISP no longer exists.

  Do you need to delete the emails too?

  If you delete your account

  • Go to Edition-> properties, then select the account. Then click Action account at the left bottom of the active window and delete your account.

  If you remove the only shipping address, then delete the SMTP Protocol

  • Go to Edition-> properties and select the Server (SMTP) "outgoing" > choose one you need to remove.

  By default, you can't remove them, if you want to remove the default value, and then create new SMTP and make default and remove the old SMTP

• Everyone can not open Wechat of the Apple Watch after the last update?

  After the update for Wechat around the end of 2015, I can't open the app to Apple Watch.

  Whenever I tried to open the app, a loading screen came, and then the application leaves itself.

  Someone help please?

  Thank you!

  I already have the Apple Watch combat and reinstalled the Apple Watch. I can always open the app.

  I use a system of 2 OS on my watch and an iPhone iOS 9 5 C.

  If you have not already done so, it may help to update your iPhone and Apple Watch for the latest versions of software.

  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  Update the software on your Apple Watch - Apple Support

  If not, try the following steps:

  • On your iPhone, go to: settings > General > storage & use iCloud:
    • In the storage section: press on managing storage > music > Edit (top right corner) > delete all the songs.
  • Back up your iPhone to iCloud (do not reset your iPhone later, just to make the backup):
    • How to back up your device using iCloud or iTunes - Apple Support
  • Also back up (but does not synchronize) your iPhone to iTunes, select the option "Encrypt iPhone backup" (even once, do not reset your iPhone later, just to make the backup):
    • How to back up your device using iCloud or iTunes - Apple Support
  • Then try again to open WeChat.
  • Music can be added to your iPhone again after trying these steps.

• After the firmware update, cannot add new reading lists

  I updated from 1.01.29 to 1.01.32 and noticed some changes.

  1. the layout of the directory of the Clip is a little different.  It allows to view the Clip in this framework, "Internal memory" and in this framework, records.  Now it's just the Clip, in this setting, files.

  2. all the songs in the video for the upgrade are not visible in the music folder or any other folder.  They are on the device, because I can play them, and they take place on the Clip.

  3. with the help of WMP11, I added a new reading list for the clip.  The finer transferred playlist songs I can see in the music folder, and the reading list does not appear in the playlists of the music (even if all the playlists of the firware update see the place very well).

  When you upgrade your firmware, the Clip reset USB mode (under settings).  Back to what you had before (PSG?) and you will probably be fine again.

  Note that now, from your description, have a few transferred to your Clip in each of the MTP and MSC modes (before and after the upgrade).  There is nothing wrong with that, except that your computer can only see what's on your Clip the content transferred under USB mode you are currently connected to your computer under.  And so he can that you want to remove your hardware update, redefine your USB mode on what she was before and then transfer to the back matter to your Clip.

• BlackBerry smartphones can not change 'Sounds for the selected profile' or create new ones

  I can't change any of the other sounds in my profiles or create new profiles.  I can switch between them and change notifications as expected from fort to vibrate to silence.  When I select 'Sounds for the selected profile' I get a transition of the screen as he opens the new screen, but then disappears.  I tried to create a new one, but the new profile button and menu option do nothing.  I upgraded to 6.0.0.246 in hope, he could solve the problem, but it didn't.  Can I change the ringtone and sounds for contacts only.  When I arrived at the torch, I could change and I even created a new.  Any ideas?

  delete nimbuzz, berrybuzz or any other instant messaging applications, and then restart the device

• Removal of the old updated if a new is installed

  I have Windows XP Home Edition. When I go to add or remove programs and choose the view that all updates also option I noticed that I have several updates on the list. If they take the disk space and then delete the old updates if I have the most recent update of the same kind installed?

  See this discussion: http://aumha.net/viewtopic.php?f=62&t=33827 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• With the MS updates and programs__ installation problems

  I seem to be difficulties with the installation of the updates and Microsoft software, and I don't know why. I bought Visio 2007 and when I downloaded and tried to install the product it failed due to an unknown error.

  In addition, I have for the updates fail when the installation is attempted. The installation of two upates are: the update of Silverlight KB982926 with error code 64 c and PowerPoint 2007 KB982158 update with 800766F error code. When I tried following the information in Help and support, the messages are: the network that this information is on can not be found(which is funny, because I'm not on a network), impossible to find the source and the unknown error. Are there any suggestions?

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It's updated operating system Vista, upgraded installation and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question of programs in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• How to use the clause type conditionally create new lines

  This question is just for learning - no object other than to start real world to create versions of some queries known to learn how to measure the performance of the MODEL clause clause of the MODEL versions.

  The question is: How can you write a STANDARD clause that pivots (updates) ONLY the lines that actually need to rotate and do NOT change the lines that have no value and cannot be rotated.

  I found a good site that has about two dozen example articles on different pieces. This first link is the beginning of the series.

  SQL features tutorials - Clause TYPE

  http://www.sqlsnippets.com/en/topic-11663.html

  This link is to a clause of FAQ of BluShadow MODEL version "how to convert rows to columns."

  Line - MODEL method string

  http://www.sqlsnippets.com/en/topic-11987.html

  The solution to this link uses this line of source:

  POSITION KEY VAL

  --- ---------- ----------

  R08 0 v1, v2, v3,.

  and this result set:

  POSITION KEY VAL

  --- ---------- ----------

  R08 1 v1

  R08 2 v2

  R08 3 v3

  The reason why it produces that result set is this clause of the statement of MODEL

  RETURN THE UPDATED LINES

  If you comment on this article, you will see that the original lines are all in position 0. This means that the solution reproduced EACH SOURCE LINE even if there is only one item in the list of values.

  Thus, even a line source with a single value (for example, the r01 'a') will be updated and updated this line is returned.

  For a large number of data sources with only a few lines that actually need to rotate it would be a great performance of infringement.

  This is the sample data source

  with t as (button 1, 'a' value 'abc' col2, col3 'def' of the double
  Select Union all 2, 'b', 'ghi', 'jkl' from dual
  Union all select 3, 'c, d, e, 'mno', 'pqr' from dual.
  Union all select 4, 'f', 'stu', 'vwx' from dual
  )
  Select the key, value, col2, col3
  t

  KEY, VALUE, COL2, COL3
  1, a, abc, def
  2, b, GHI, jkl
  3, "c, d, e, mno, pqr.
  4, f, stu, vwx

  Lines 1, 2 and 4 only have a value of (a, b, c respectively.

  Only line 3 must rotate. It contains "c, d, e" and which must become 3 lines in the result set

  Value of the key, col2 col3
  1 an abc def
  2B ghi jkl
  3 c mno, pqr
  3 d mno, pqr
  3 e mno, pqr
  4 f stu vwx

  The nut of the problem is that if the clause 'RETURN UPDATED ROWS' is used, then the lines 1, 2 and 4 must be updated in order to be returned in the result set. And if this clause is NOT used, then line 3 must be updated by 'c', d, e 'c' and two new product lines: one line for a ' and one for 'e '.

  How can you do this with the TYPE clause without the help of the clause "Return LINES UPDATE"? I don't have a solution to sample showing what I tried because I can't understand what it takes to even try.

  I have a solution that uses "RETURN UPDATED ROWS" but I want to compare this performance to the exercise, when this clause is NOT used.

  We ask BluShadow to add the solution of MODEL clause to this FAQ with other similar solutions.

  Like this?

  SQL > with t as
  () 2
  3 select the 1 key, 'a' val, 'abc' col2, col3 'def' of the double

  
  Select 4 Union all 2, 'b', 'ghi', 'jkl' from dual
  5 union all select 3, 'c, d, e, 'mno', 'pqr' from dual.
  Select 6 Union all the 4 'f', 'stu', 'vwx' from dual
  7)
  8. Select the key
  9, key_1
  10, val
  11, regexp_substr (val, ' [^,] +', 1, key_1) val_new
  12, col2
  13, col3
  14 t
  model 15
  16 partition by (key)
  dimension (1 key_1) 17
  18 measures (val, col2, col3, (length (val) - length (replace (val, ",")) + 1) as len)
  19 rules
  (20)
  21 val [for 1 to increment of len key_1 [1] 1] = val [1]
  22, col2 [for 1 to increment of len key_1 [1] 1] = col2 [1]
  23, col3 [for 1 to increment of len key_1 [1] 1] = col3 [1]
  24)
  25 order
  26 by key
  27, key_1;

  KEY KEY_1 VAL VAL_N NECK NECK
  ---------- ---------- ----- ----- --- ---
  1 1 has an abc def
  2 b 1 b ghi jkl
  3 1 c, d, e c mno pqr
  3 2 c, d, e d mno pqr
  3 3 c, d, e e mno pqr
  4 1 f f stu vwx

  6 selected lines.

• After the upgrade of the muse at the latest, he keeps creating new ftp folder

  I had missed several updates and just caught up this week. now when I go to download my ftp host site,.

  said ftp area that it "doesn't seem to be pointing to (any website) folder.

  It gives me an option to let 'fix' - and he says: it creates a new folder. They seem to have downloaded ok and it look ok, but before he finished, I see "deleting" things of another one of my other sites, as perhaps it is stuff remove old folder on the host.

  Then, every time I make a change, the same thing is happening all over again and it downloads the entire site. It of weird and takes forever and I have to tell him to 'fix' it every time.

  What gives? I have several sites to work on so I can't have this keep happening.

  Please send a screenshot of the FTP download dialog box second in [email protected] as well as a link to this topic for the context. We need to see exactly what you have entered. Thank you.

• Serious problem with watch since the software update

  Hello

  I have a serious problem with my watch since to do the update of the software this morning.

  Watch dial keeps flashing between the Apple logo, dial and access code.

  Watch does not respond when you try to enter the access code or button does not not so can't turn off to try to restart.

  I tried to disable pairing my iPhone 6s but watch be message saying "can't match Apple Watch - Activation lock could not be disabled on your Apple Watch because of a server error.

  Nothing seemed abnormal during the update, I just let him do his thing.

  Any help would be welcome.

  With great thanks

  Nicola

  Hi Nicola

  Try restarting your watch force: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo, then release them and expect the watch again.