Select compile Server

Similar Questions

• Why is the FPGA Compiler server so slow?

  FPGA Cloud compiler is faster because NO servers are performing, right?
  Well, my Windows 7 PC is powerful, but no luck there!

  Total CPU utilization is never more than 25% and the total memory (including other applications) usage is less than 16%.
  Why, the compile Server uses all available resources? has been restricted?
  How can I leverage more power from my PC?

  If servers OR compile faster code, there must be a plausible explanation / reason?
  Please indicate, how to make the compile server running faster in place?

  I don't know what machines compilation cloud service works, but I do not.

  It seems that the compilation is much faster on a Linux machine on a Windows machine (I think I've heard up to 30% faster). The Linux FPGA compile server is available for LV2012. Set up a Linux machine with a clock high enough CPU and RAM speed and you will get on the fastest possible compilation with current tools.

• FPGA compile Server Corruption

  Background:

  I have an installation of Windows 7 64 bit running on an i7-930.  In Oct. I installed LabVIEW FPGA 2009 SP1 build server from a copy of the .iso image of NEITHER.

  In addition, I have VMWare Player installed with the full development suite installed, targeting the server hosts compile.

  We book this system into 'production' for the 3 months preceding the feast of the new year...

  Question:

  When I returned from vacation, not a single machine in the factory can hit the compile server on Win7 host, including installed VMWare LV tools running on the same PC.  It seems that the clock carried over from 2010 to 2011, and the compile server went poof!  Initially, the compile Server complained that Xilinx tools license had expired.  Once I reinstalled the server compilation, nothing can connect to it, not the server errors, delays network comes from the development tool.

  Troubleshooting:

  Obvious things:

  ' 1) ' reboot ' on the VMWare image and host; no change,.

  (2) double check anti-virus is disabled; no change,.

  (3) check the Windows Firewall is disabled; no change,.

  VMware, other servers in fine compilation on the work of the other PC on the network (for VMWare isn't the issue, but played with bridged vs NAT anyway; without change).

  VMware, the 'local host' compiles Server works very well (remember, it's that of virtualization, it doesn't have the VM host on Win7 version).

  Reinstall the server compilation; no change.

  But here's where things get funky.  The IVR folder with the compile server has only a handful of files it contains with no record.  On the other compiling work servers, IVR file is loaded with support files files.  It's as if the installer does not install all the files right...

  Copy IVR system folder of work on top of the half installed folder; no change.  Bluff installation and start fresh with another to continue troubleshooting (this has been done a lot)...

  Do the various Registry hacks to take away the remains of uninstall process and align with the work of compiling server machines registers; no change.

  Walked through the Knowledge Base of NI.com and Forums.  Several issues that either I solved with relocations, left unanswered, or have been resolved without getting clarification on exactly what happened or how to fix it.

  A run the TList hack manually (difficulty TList.vi does not unless you have the run-time installed LabVIEW and my Win7 OS host does not work). no change.

  Hunting the Perflib fix rabbit in this hole; no change.

  Next steps:

  Will try to install it from another copy of the DVD LVFPGA in case my .iso image have fried or 'cleaned' by McAfee.

  Any ideas?  I would like to avoid reimage your computer for a number of practical reasons, including not seen the Win7 install DVD without invoking the wrath of it, tape / associated explanations invoking it or the huge amount of time lost in this process (and the square itself)...

  I saw a funny similar behavior when you use a server remote compilation when VMware gets thrown into the mix.

  My specific case was:

  Windows XP (32 bit) Welcome + to compile the server

  Reviews of Windows XP (32 bit) + LV development system (bridged network operation)

  Under certain conditions (I couldn't understand what was the trigger), LV development system could not connect to the server for compilation. Boost LV and even the virtual machine it ran into would not solve the issue. Moving the server to another physical machine compilation does not resolve the issue.

  All firewalls was extinguished without a change in behavior.

  I ended up resorting to statically assigning the port that the server remote compilation using this KB works on:

  http://digital.NI.com/public.nsf/allkb/BE02DC97330CD1D8862576A500015AB8

  Once set, all my LV development environments have been configured to use static port. I have not seen the problem since. I think there may be some problems with Service Locator of NEITHER when dealing with VMware.

  It doesn't sound like you are experiencing exactly the same problem, but this can give you more options to try.

• Whenever I turn on my laptop, a Dial-up "connection" window appears in the middle of my screen asking me to "select the server you want to connect.

  Original title: Dial-up connection

  Whenever I turn on my laptop, a Dial-up "connection" window appears in the middle of my screen asking me to "select the server you want to connect," even if I'm already connected to the Internet...  How can I get rid of the popup window?  All my updates are installed.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Search for the issue in the clean boot state.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the procedure described in step 1 in the section below to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

• How to download the file selected from Server?

  Nice day

  I use Jdeveloper version 11.1.2.3.0.

  My requirement is like, I have a directory on the server that contains some files. My end user wishes to select a specific file and then download it to the local computer. you could say as a replacement of FTP through my application. Is it possible to do?

  Best regards,

  Julien

  First to get the entire list of files from the server

  	Directory of the file = new File (path);
  	get all files in a directory
  	File FListe [] = directory.listFiles ();

  then use this list to fill a list of choices on the page to display to the user

  Blog of Ashish Awasthi (Jdev/ADF): fill the values programmatically in a body af:selectOneChoice ADF

  download it and then (see sharing above link)

  Thank you

• Select Remote Server [from: to see the files in your repository to define Version control settings]

  Hi wjwallis...

  You mention above...

  view of remote server? Like this, where you can read "Repository Files"?... see picture

  ... Yes, but how you switch to the ftp repository?

  Thank you very much... I hope this corrects mine... When you tell me

  Warmly, hope

  

  Select the remote server icon in the top of the files Panel expanded:

  

• Not able to select physicalschema Server data files directory in ODI 11 g

  Hello
  I am a beginner at tech ODI and stuck with a mistake while doing a tutorial (mentioned in this link - http://st-curriculum.oracle.com/obe/fmw/odi/odi_11g/ODIproject_ff-to-ff/ODIproject_flatfile-to-flatfile.htm).
  Creating a physical schema for server default file (FILE_GENERIC), I'm not able to select the directories of schema and the name with the value field ' FILE_GENERIC. Directory "is grayed out (not editable)
  I have gone through many documents but could not find any information for this.
  
  So could you please let me know if all of the requirements for this?
  
  
  Thank you
  Anusha

  While creating the physical schema, name field is grayed out, which is the default behavior of the screen?

  Name is automatically changed when you type the path in the field "Directory (schema).

  Kind regards
  Oleg

• How the device select radius-server

  Hi guys,.

  We have the existing Ganymede configuration to form our devices and server ACS 2 did. the acs server are managed with other suppliers that the acs server is on their site. Now intended to manage the acs server. We installed a new server CSA of our location, we have thousand of the devices, if we move to the new server we just add the acs unit 2 Server? the new acs server will be are able to connect to the device? How a device chooses which acs primary or secondary server?  Please notify.

  Old configuration

  AAA new-model

  AAA authentication login vtymethod group Ganymede + local

  AAA authorization config-commands

  AAA authorization exec default group Ganymede + local authenticated by FIS

  AAA authorization commands 0 default group Ganymede + local authenticated by FIS

  15 AAA authorization commands default group Ganymede + local authenticated by FIS

  AAA accounting send stop-record an authentication failure

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 0 arrhythmic default group Ganymede +.

  orders accounting AAA 15 by default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  Ganymede IP source-interface Loopback0

  RADIUS-server host 10.x.x.x

  RADIUS-server host 10.x.x.x

  New config

  AAA new-model

  AAA authentication login vtymethod group Ganymede + local

  AAA authorization config-commands

  AAA authorization exec default group Ganymede + local authenticated by FIS

  AAA authorization commands 0 default group Ganymede + local authenticated by FIS

  15 AAA authorization commands default group Ganymede + local authenticated by FIS

  AAA accounting send stop-record an authentication failure

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 0 arrhythmic default group Ganymede +.

  orders accounting AAA 15 by default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  Ganymede IP source-interface Loopback0

  RADIUS-server host 10.x.x.x

  RADIUS-server host 10.x.x.x

  RADIUS-server host 100.x.x.x<-->

  RADIUS-server host 100.x.x.x<-->

  Hi m.,.

  N ° not round robin.

  It checks the first IP address. It checks only the following IP address if one has failed.

  I hope it's clearer now

  Rating of useful answers is more useful to say "thank you".

• I'm unable to send emails.  I get a scrolling message telling me "cannot use the server for help. Mac account (iCloud). "" Select another server to mail out in the list below.  Does not work!

  How to restore my ability to send emails?

  This means that something is wrong with setting outgoing (SMTP) for this account.

  What's the connection doctor? Mail > Windows > connection doctor

• Question of server FPGA compile

  Hello

  I want to implement a system of compilation farm. There is only a PC development (possibly 1 later) and compiles a worker. The question is, the compile Server (one which dishes to the worker of the compilation of the tasks) possible on the same PC used for development, and in the affirmative, he introduced the bottleneck important compared to using a dedicated machine?

  Thank you

  Hi ToeCutter,

  The compile server can be on the same PC that is used for development without any problem

  ' ' ' ' Refer to the getting started with the FPGA document compile farm, available by selecting Start "all programs" National Instruments "FPGA" start-up of the farm to compile FPGA, for more information about configuring and using FPGA compile farm.

  Use "localhost" as the host name of the server for your compilations to compile.

  Compile farm server uses the same compiling installed tools (Xilinx) on your PC, but instead to directly obtain the LabVIEW project files

  It compiles the files downloaded by the user, there is no difference in performance.

  I hope that helps!

  Kind regards

• installation of server compilation

  Dear Sir/Madam,

  I used module labview 2010 FPGA to establish an interface with the cRIO-9022, I built a FPGA vi in the FPGA target and tried to compile the vi. However, I was told that there is a communication error "compile the local server is not installed on this computer.

  This error appears in the attached picture

  I have download module FPGA of NI LabVIEW Modules and Toolkits for Embedded Design. It does not compile server in the installation.

  What should I download and installed so that I can compile my FPGA vi with the cRIO-9022?

  Thank you very much

  Li Shen

  Hi there Seevy,

  Let me take a little time to explain what, in my view, that the scenario is:

  You encounter this problem because there is no compilation tool installed. The message is to direct you to the farm of the compilation, but this isn't really what we want to use in this case. Compile farm is a piece of software that allows you to share the work of compilation of several PCs all connected to a "compile server. The intended use for this software is extremely large projects/code FPGA or where people should be recompiled several times per hour and have access to the processing power of networked PC.

  So what we need to do, is to install compilation tools designed to operate in an environment independent of the network. These are the tools of Xilinx, named after the manufacturer, who represent the majority of the FPGA chips in the section of the chassis of the cRIO.

  See if this link works for you. There should be downloads for image files .iso of Xilinx tools part to the bottom of the page.

  http://digital.NI.com/src.nsf/title/FB76DB328E265F9D8625776C006573C6?OpenDocument&node=203014_us

  You will need to burn these files to .iso to a DVD with the software capable of burning burning .iso. Then reinsert the DVD and it should auto run the correct splash screen or the installer.

  Before undertaking such a large download, I would recommend go to measurement and Automation Explorer, do a right-click of the domestic software in my system and then wait the window loading. In this little window, you can look through the list of installed software to see if the Xilinx tools are already installed.

  Thank you for taking the time to read all this! Let me know what you decide to do.

• Unable to connect the server compilation

  I am trying to load the FPGA VI tutorial on my 9004 cRIO device and get this error when compiling

  The compile server doesn't have all available worker who can make a compilation of Xilinx 10.1.

  * You may not have installed the correct build tools.
  * The worker local compilation can be configured to a different compile server.
  * The local compilation worker can be in an error state.

  Details
  123002 error occurred in niFpgaCompileFarm_OpenJob.vi

  Possible reasons:

  NEITHER the farm: no worker has registered the name of given capacity.

  «"" "String of full appeal:»»"»
  niFpgaCompileFarm_OpenJob.vi
  niFpgaCompileWorker_OpenJob.vi
  niFpgaCompile_Worker.vi:1

  Departure time: 17:50:14
  End time: 17:51:07
  Total time: 00:00:54

  I try to acess manually the worker compilation .exe file and it says that the installation of xilinx tool should be checked. and that it could not load a file. (SEE ATTACHMENT)

  I'm not trying to connect to any remote computer. its local server. Here are my computer details

  WIN 7 32 bit

  LV 2010 full dev

  LV fpga in real time all the latest

  Xilinx 10.1 (my chassis is crio-9104 using a virtex-II Bridge)

  I read that xilinx has no full support for WIN 7 not yet. and seen on their website too. But I do not see other ppl with a few problems on the server for compilation with WIN 7 OS, but seems to have solved the problem (although not similar to mine). Which means they made it work somehow. (xilinx Web site says also that he has LIMITED support for win 7)

  I'm really stuck here. I'm still in my learning and (just trying to compile the tutorial VI!) and I don't want to waste time. I feel really stuck here. any help would be great!

  Thank you!

  Rajesh

  Ok. I think I got it. I've reset my network connection and asked to labview to compile. could not connect to compile the server. While crossing retry to connect, I launched the server compile manually, by clicking on the compilation server.exe and then done labview link. I guess I have overlooked some instruction somewhere that compile server.exe must be launched before making an attempt on the compilation.

• Choose the worker of compilation

  I installed a worker to compile on a linux PC remotely as described here.

  Worker compiling on the remote PC can connect to the compile on PC (widows running) local development server.

  Now, when I make a compilation of the local compilation worker is selected by default.

  How can I select the one remote?

  My setup is as follows

  Development PC: Windows 7, LabVIEW 2010, Xilinx 11.3

  Remote PC: Linux (Ubuntu10.10, I know it is not supported by OR), 2012 LabVIEW compiles worker, Xilinx 13.4

  Is there a compatibility issue between LabVIEW 2010 and 2012 of LabVIEW? Or between the Xilinx software?

  Thank you

  LabVIEW 2010 provides only compile for use with Xilinx 10 and 11 toolchains. Therefore, when you make a compilation, the compile server will search for these tools. Since you have only the xilinx tools installed 13.4 remotely, LabVIEW 2010 will not choose this ability to perform compilations.

  You must update your LabVIEW 2012 host PC to take advantage of its remote workers compiles with the features of LabVIEW 2012.

• Internal error of the compiler-123002

  Hi all

  I read this error in other post (with the server), I did what it says also in Help:

  -J' reinstalled the drivers and all the things, Xilinx tools are installed as well.

  -I don't have that one device target FPGA (RIO0, SMU-7966R)

  I don't know what could happen, my projects used to run and compile correctly, I changed the location of the screws in the computer in order to get the orderer and there is suddenly no longer works.
  One thing that is quite rare is the option to "Select the server compile" pop up after I press the botton to cancel.

  "LAbview FPGA: the compilation can be performed by the worker of the compilation." The SME worker of compilation are configured incorrectly for this compilation, or maybe a status error '--> I did something with it. "

  When I create another project that connects a simple addition of two constants, don't let compile me, then... This isn't for lack of screws.

  Thank you in advance, it is such a thing as boring.

  Best regards
  Miguel.

  Hi all

  In fact I solved. What happened is that the path of the compiler has been moved to a different folder, so Labview was unable to find it. Put in the correct folder once again was the key.
  It was a stupid question finally, but information is pretty confusing sometimes. I put it here in case other people need.

  Kind regards
  Miguel.

• AFP://user: password@server + connect as?

  Hello

  before you move on to Sierra, to connect to my NAS, under Finder-> go-> connect to server, I used to type:

  AFP://user: password@server/share_name

  with no pop-up windows ' connect as '.

  Now, after the upgrade, after the command: afp://user: password@server, a "connect as" windows appears and it's annoying.

  Someone knows how to jump this window "connect as"?

  Thank you

  Daniele

  I think it has something to do with SMB being now the default connection for Sierra. I tried the syntax shown you and replaced "afp" with "smb", but still have the screen connect as . Even when you select the server in the left pane of the Finder, I always have to make a sign in as. It is used to remember how I connected and go immediately to the actions on the server, but no more. Always have to connect as.