Waveform multiple graphics "bunk plots" with limits

Similar Questions

• Graphical evolution Plot legend

  I have no problem to change a legend of normal graphics plot with a property node, but I try to show three different sets of data on a graph.  I tried to do a reference of the parcel with the legend of the plot and using the text of the legend.  They should be definable when the VI is running, but the way that I tried to do, I had a reference error (1055 invalid reference).  Defining the Plot legend or legend text would be acceptable if I could just understand.

  I try to view 32 spectra, but only use 8 graphics and the name of this particular channel change.  This without a the name of the channel FFT gets presented in the graph, but when I use the power of the spectrum VI I don't have the info from spectrum plugged into anything.  So, I'm bringing my original table of channel name more and try to iterate to take the reference name and the correct pitch channel.

  I only extracted the part of my code for this issue, so I hope it's easy to watch what I'm doing.

  The first VI and Subvi are functional.  The second Subvi is where I was trying to change the text of the legend.  I tried other things too, but I just wanted to show a way I was trying to do.

  I do not have the OAS add on so I can not check your main program. I looked at your sub vi and you do more code that you need. Take a look at my example, I put your 8 graphics in a cluster then used a table of references and tables for your index of chanel. Maybe this can give you some ideas for your program.

• TOSHIBA Power Saver won't work on the account with limited privileges

  Good day to all.
  I have old Satellite 1410 and for security, I am working on an account with limited privileges. I can't start Toshiba Power Saver, I get "access denied" message.
  I need to remove energy saver and I use Control Panel Power Option, but I can not here the default brightness.
  Can someone help me?

  Janusz

  Without system administrator privileges, many system options are locked and could not be used.
  You need admin rights to access this tool.

• When I go online on Skype, my internet will with limited access, and I'll offiline

  When I go online on Skype, my internet will with limited access, and I'll offiline

  Hello

  1. which version of Skype is currently installed on the computer?

  2 is this problem limited only when using Skype?

  3. what type of Internet connection you have (cable modem, DSL, or something else)?

  4 when it disconnects what do I you end up doing for her return to the connection?
  5. What is the exact error you get that tells you that the device is disconnected?
  6. what version of operating system you are using on the computer?

  Method 1:
  I suggest you run the network troubleshooter to check if it helps.

  Troubleshooting network in Windows 7 using:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  You can provide the network store event logs.

  Method 2:
  You can update the latest drivers of NIC manufacturers.

  Windows 7: http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  The question you have posted is related to Skype and would be better suited to the Skype forum community. Please visit the link below to find a community that will provide the best support.
  http://Forum.Skype.com/

• Error 0 x 80042318 - I am connected to my network, but with "limited access".

  Although I have installed and am running and using the IE Version 9.0.1600., now, I am unable to do a full full Internet_Connection.  I am connected, but with "Limited access" and consequently, nomatter who HTTP://WWW.Address I try to connect, the page always comes back to the page 'WWW.Blank'.    Any assistance that may be available to be appreciated.  Thank you!...      Other info, are as follows: -.

   

  Product... COM event system.
  Problem... Stopped working
  Date of... 25/04/2011 15:56
  State of... Not registered... Signature of the problem

  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef23d3820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  Files helping to describe the problem
  Version.txt... AppCompat.txt... memory.hdmp... minidump.mdmp

  ======================

  Product
  System event COM +.

  Problem
  Stopped working

  Date
  23/04/2011-16:15

  Status
  Not reported

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef2243820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  =============================

  Product
  System event COM +.

  Problem
  Stopped working

  Date
  18/04/2011 12:55

  Status
  Report sent

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef3cd3820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  Files helping to describe the problem (some files may be is no longer available)
  Version.txt
  AppCompat.txt
  Memory.HDMP

  Additional information about the problem
  Bucket ID: 215206108 =.

  Product... COM event system.

  Problem... Stopped working

  Date ............... 18/04/2011-19:27

  State of... Report sent

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef3e23820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  Additional information about the problem
  Bucket ID: 204865927 =.

  Product
  System event COM +.

  Problem
  Stopped working

  Date
  18/04/2011 12:55

  Status
  Report sent

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef3cd3820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  Files helping to describe the problem (some files may be is no longer available)
  Version.txt
  AppCompat.txt
  Memory.HDMP

  Additional information about the problem
  Bucket ID: 215206108 =.

  conduit
  Host process for Windows Services

  Problem
  Stopped working

  Date
  21/04/2011-21:03

  Status
  Not reported

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: StackHash_9cfd
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 000007fef2d13820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 9cfd
  More information 2: aea2a0d7a408bfb90d70a40b35741536
  Additional information 3: add1
  Additional information 4: e86fd8f76207b04502fc8a8c6058a723
  =======================================

  Product
  Internet Explorer

  Problem
  Web page display problem

  Date
  20/01/2011 16:30

  Status
  Report sent

  Description
  A display of a webpage caused problem refreshing the page using the Internet Explorer compatibility view.

  Signature of the problem
  Problem event name: MSHTMLLAYOUTHARDASSERT
  AppName: iexplore.exe
  AppVer: 8.00.6001.18702 (longhorn_ie8_rtm (wmbla). 090308-0339)
  ModName: mshtml.dll
  ModVer: 8.00.6001.18702 (longhorn_ie8_rtm (wmbla). 090308-0339)
  Offset: 0x003D6226
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105

  Additional information about the problem
  Bucket ID: 1530749661 =.

  Fault Module name: netprofm.dll_unloaded

  Fault Module Version: 0.0.0.0

  @ Poppyjoe.Joe

  Find out why this module is still used even if he was apparently discharged?   You can use ProcMon or DepedencyWalker to get more clues to this topic.
  Good luck
  Robert Aldwinckle
  ---

• My connection says connected with limited connectivity

  My connection says connected with limited connectivity, I checked that the password is correct and the type of security eg wpa tkip. He also says on the connected state arnd ipv4 and ipv6. Also when I put the cable in as doesn't pick up. I hope someone answers!

  Hello

  ·         Is this a wired or a wireless connection?

  ·         Were there any changes made to the computer until the problem started to occur?

  ·         Are you able to connect to the internet?

  Step 1:

  You can follow the suggestions in the link given below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  Step 2:

  Connect the Ethernet cable and boot the desktop mode safe mode with networking and check what is happening.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Wi - Fi connected with limited access

  I can't connect to the internet.  My shows of WiFi - connected with limited access.  When I view the status of wireless network connection - it shows IPv4 and Ipv6 not connected.

  This suggests even more than the fastest and the best option you have is to contact the ISP and have them help you with the installation and check all devices (including their and their connection to your location).  You can fight with various alternatives that may or may not work because we are not sufficiently familiar with your Installer, equipment or requirement of ISP, or you can go directly to them and I'm reasonably sure they'll have you facing up and running without delay (assuming that it is not a hardware problem or something at their end).

  The decision is yours.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to fax multiple pages at once with the HP 6500 has more

  How to fax multiple pages at once with the HP 6500 has more.

  I don't know why I can't do this, it sends do not ask if you need to scan another page.

  Your device contains a document feeder, the sending of several pages of the Scanner glass is not supported.

  Simply place the pages face up on top of the document feeder and send the fax, as shown below:

  http://support.HP.com/us-en/document/c02299537

• Wireless Internet with 'limited access '.

  I tried to connect my new laptop Dell Vista to our network wireless at home. After many unsuccessful attempts (due to an unknown "logon doamin") I was finally able to connect to our server, however, with "limited access". Despite having "limited access" internet still does not work. Is anyway to solve this? We currently have two other laptops that work well on the wireless network.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path? Make sure that the computer is trying to connect to the correct router as there may be
  another strong signal near her.

  Other Vista computers? You use the WPA/WPA2 security?

  Actually try updating your driver and disabling the network logon. Use a wired connection or download
  pilots on another machine and transfer on removable media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• RSAT tools with limited options

  Hi all. I want to help the technicians of our office to install the RSAT tools to use for users and computers, but I don't want that they are able to access the DNS, DHCP and other options. I can't find articles or info on how to do this. Does anyone know how to run the installation with limited options and the other where they cannot go to add/remove feature of windows and install?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it
  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Get the canvas/screen of an object as a bitmap graphics? Help with post processing filter!

  Let's say I want to create an effect of post-processing, such as changing the pixels of the screen in a color a little more red (AFTER this drawing), or do a screen wavey distortion.

  I thought that my layout as follows:

  final class MyPaintScreen extends FullScreen{
      //
      //... stuff here
      //
      public void paint(Graphics g){
          //all kinds of draw commands here, then
          //the post processing method is called
          PostProcesser.modify(g);
      }
  
  }
  final class PostProcesser{
      final static void modify(Graphics g){
          //here lies the problem.
      }
  }
  

  Ideally, the modify method would use the Graphics object as a parameter, and it would get her a bitmap or an array of bytes/int with the data drawn. Then she do all that the pixel values and then crush them to the Graphics object. Or maybe it would do all this without copying it in a bitmap/picture and just edit a graphic field directly.

  I thought that it would be a way to get an article / a region which was drawn (I want my post method only affect an area of the screen), but there is no method to return the screen stretched somehow, it seems. There is no Bitmap field in class Graphics to mess with. No table with the pixel values. No getBitmap/getRegion method.

  After thinking long and hard, I thought to use a sort of buffer to the screen. Have a Bitmap of the size of the screen and instead draw things on the screen, draw them on the Bitmap object, and then apply the post treatment methods he and then draws the Bitmap over together on the Graphics object... but it seems so memory intensive. Moreover, I have to use the thingies setARGB awful and messy the bitmap instead of the methods of the Graphics class Drawing.

  Any advice on that? Comments? Help? Suggestions?

  Just to confirm the approach of the buffer, you can create a bitmap image in the desired size, create a Graphics using the bitmap object, and then you can call 'paint' provide your own Bitmap, rather than the image of the screen image.

  You can also get it current graph of the screen using . getGraphics().

  Not sure this helps.  Good luck.

• The "PNY QUADRO K4200" graphics card works with first? Maybe you suggest me another graphics card?

  The "PNY QUADRO K4200" graphics card works with first? Maybe you suggest me another graphics card?

  This card should work as its on the system requirements | Adobe Premiere Pro

  But first is not take advantage of the advanced features of quadro, and a similar performance quadro vs gtx can cost 5 times more. If you better save your money and go with a gtx. the gtx 950 would be about the same performance as this K4200, but much less expensive. a 970 gtx about 2 x more powerful, but still half the price.

• HI, I'm wanting the form tool allows you to create multiple copies of documents with customized in each information fields. From excel data. Is this possible?  Thank you, Charlotte

  Hello

  I am keen on the form tool allows you to create multiple copies of documents with customized in each information fields. From excel data. Is this possible?

  Thank you

  Charlotte

  This is called a fusion and mailing. There is a possibility of Embedment in some versions of Excel (via the Acrobat PDFMaker plugin), or it can be done using a script.

• Is Photoshop in version full package photography or with limited functionality?

  Hello

  It is in the title

  And we're more - package of photography for all or only for those who can prove they are photographers?

  Thanks for the help!

  Hi Jtk,

  Ques1. Is Photoshop in version full package photography or with limited functionality?

  Years1.   You'll get the complete version of the last Photoshop CC2014 Photoshop package.

  For more details https://creative.adobe.com/plans

  Ques2. Is the package that he photographs for everyone or just for those who can prove they are photographers?

  Years2. It's for everyone and you don't need to prove that you are a photographer.

  Let me know if you have the questions more.

  Thank you!

  Florianne

• WPF graphics, display plot marker (with contact information tooltip) on the mouse event

  Hello

  I need display the coordinates of the point of the field when the mouse pointer is positioned top/close to him.

  I already display a ToolTip with coordinates using the code in this LINK (works equally well for graph).

  However, it is not easy to see where the field is selected, especially when you have more than one land close to eachother.  Is there a way to display some sort of a 'marker '?  A bit of as Signal Analyzer?

  Thank you.

  If you want to display a target and the label next to the value as a user moves the mouse over a graphic, a possibility would be to use SetRelativePosition on a slider.

  If you want to just use a marker in the chart and keep the label in the ToolTip, you can set the relative position of a Visual in the Children collection:

  XAML
  
      
  
          
  
              
  
              ni:Cursor x:Name="cursor" />

            

            Ellipse x:Name="marker" Width="10" Height="10"

                     Stroke="Black" StrokeThickness="2"

                     niPrimitives:RelativePanel.RelativeHorizontalAlignment="Center"

                     niPrimitives:RelativePanel.RelativeVerticalAlignment="Center"

                     />
  
          
  
      

  Code
  
      private void OnPlotAreaMouseMove( object sender, MouseEventArgs e ) {

        IPlot plot = graph.AllPlots[0];

        Point screenPosition = graph.GetPlotAreaPosition( e );

        Point relativePosition = graph.ScreenToRelative( screenPosition );

  // Option 1

        cursor.SetRelativePosition( relativePosition );

  // Option 2

        PlotValue nearestValue = graph.FindNearestValue( plot, relativePosition, query );

        if( nearestValue != null ) {

            graph.ToolTip = string.Format(

                "Nearest value is at ({0},{1}).",

                nearestValue.Value.Cast

  Point nearestValuePosition = nearestValue.GetRelativePosition( );

            RelativePanel.SetRelativeHorizontalPosition( marker, nearestValuePosition.X );

            RelativePanel.SetRelativeVerticalPosition( marker, nearestValuePosition.Y );

        }

    }