WCS Web integration - Auth-AD

Similar Questions

• How to create a custom Web Integrator ADI 12.2.4

  in 12.2.4, How to create an ADI Web Integrator custom

  is there some ID Doc or pdf on the subject

  The process has not changed since R12.1.x

  See these examples

  http://blog.smartdogservices.com/create-a-custom-Oracle-Web-ADI-Integrator-using-desktop-integration-framework-GUI/

  http://oracleappselearn.blogspot.com/2014/08/Oracle-Web-ADI-creating-custom.html

• How do reset us the Web integrated (built-in web server) server on our Pro Wireless 8500 A909g printers?

  We try to remotely administer printers HP OfficeJet Pro 8500 A909g Wireless

  M/N: CB023A

  They print and scan very well, and we can access the home page of each printer EWS.

  We have been asked to make a few changes and cannot go beyond the EWS username and password authentication request.

  In my view, it has been defined by a previous administrator, but him documented names of user and password we have on file do not work.

  How do reset us the EWS password?
  
  I have the default value is EMPTY, but if not, that would be the default password after reset?

  SOLVED!
  
  Then I got a job to another printer HP OfficeJet 8 X 00-
  
  All you have to do is RESTORE network defaults on the front control panel - this will reset the default value:

  (1) requirement for access password turned OFF

  (2) default user name is ADMIN

  (3) password is EMPTY

  then, on command before Panel set your IP network information, and you will then be able to access the built-in Web server and see all / manage all settings, including resetting the password to the web server integrated EWS.

  WITH THE SUPPORT OF HP NO.

• Web page Auth login

  Is the new 5500 WLC supported several Web Auth login pages? I want to consolidate my WLCs in a central place and maybe just a controller. I have several different comments for different departments wireless networks, and each has a custom login Auth Web page.

  Hello

  If you run the WLC 4.2 software and above then you can do it per WLAN based... Here is the link that shows how to do...

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml#A1

  Let me know if that answers your question and please do not forget to note the useful messages!

  Concerning

  Surendra

• Fonts Adobe Originals & web integrating licenses

  If I create a .pdf and with fonts embedded .swf files provided with one of the Adobe products, lets say I will use regular "MinionPro", "MyriadPro-Semibold" and "NewsGothicStd-Oblique" and if I publish then such a file online, do I need a special web site integrating the license of these fonts, or "editable (coating)" also covers the use of fonts? Is there a difference between the files of publication for commercial and non-commercial? TIA.

  These forums are forums Adobe users and are generally not controlled officially by Adobe. It is not an outlet for official technical support of Adobe or customer support.

  -Dov

• Printer Officejet Pro 8620: How to reset the Server Web integrated (built-in web server) on the printer Officejet Pro 8620 Pro?

  The password has been reset, but we cannot go beyond the server request the user name and password to change the other settings.  We have not had any problems to set up the printer to the computer and we are able to print and use the printer.  We just need to find EWS to change other settings.  We use Windows 7.

  Hi there @Mariko23

  Welcome to the forums,

  I understand the SAP you request a user name and password and you're looking to reset the built-in Web server to access accordingly.

  I suggest try to restore default network settings on the device, which should help you.

  On the printer, select Setup, network configuration, network by default, Yes, restart the printer.

  Good luck, I hope this helps

  

• ISE and WLC for CWA (Web Central Auth)

  Hi all

  As we know that WLC (i.e. 5508) is intolerant of MAB (MAC Auth Bypass) and it supports CWA in 7.2.x.

  CWA is the result of successful MAB. So, how CWA to work for the wireless? So that means WLC support MAB?

  Hello

  The term in the wireless world is mac filtering. When mac filtering is fired, you will return the CWA portal in the access-accept.

  Don't forget to set your condition in the authentication policy to continue if the user is not found, while the device can hit the CWA default rule.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Adobe sells a web integrated flash drive

  I need to incorporate

  a flashdrive in a Web site. The flash player that will allow my client to play almost all formats. The problem is that Adobe do not sell a player. Why not?

  Geoff

  Geoffrey edwards wrote:

  Thanks Mac + Win = Me

  Time to learn to use the program then. What playlists can they be added with Flash CS3?

  The use of ActionScript, Yes, playlists can be added.

  There is a forum for that too when the time comes.

• What is the license model for web integration of Acrobat?

  Hi, if I develop a web client / web application server whith Acrobat to perform certain tasks on pdf from a web browser, since Acrobat works with JavaScrit, IE client side, is that Acrobat must be executed (and bought) on each client computer by using the web browser to play with my apps?

  Thank you

  Frédéric

  Acrobat cannot be run on a server (it's both a violation of the EULA and a technical problem), so it can operate only on the desktop.  This means that Yes, he would need to be purchased and installed on each client computer.

• WLC web certificate auth - part 3 - what one do need me?

  So I understand now what I need to do with regard to the addition of a certificate of party 3rd in my WLC to allow users to access the login screen without getting a warning from "trusted site".  My next question is which certificate should I buy?  When I go to Thawte, there are a lot of options. (

  ( http://www.thawte.com/ssl/index.html) Any suggestions? Thank you

  PS, this is a great reseource for implementing wireless comments:

  https://supportforums.Cisco.com/docs/doc-13954#comment-5826

  Thank you

  Hello

  If it's for guest access the SSL123 should be fine. You can also get the appropriate certificates from RapidSSL (www.rapidssl.com), and they are less expensive than Thawte.

• Cannot connect to the integrated Web server

  I have a HP p1606dn printer I need to change the IP address. I can't connect to SAP by using the IP address of the printer configuration page. I also tried on a work of the same model printer and cannot connect. I can't understand what I'm doing wrong. I type in xxx.xxx.xx.xxx in the address bar in Internet Explorer which is supposed to be an approved browser. Thank you!

  If the Web integrated printer server does not load when the IP address is entered, then means generally is not a direct path between the printer and the computer is trying to access.

  You mentioned that you must change the IP address.  What is the reason for this change?  The network IP addressing scheme changed so that the PC and the printer may appear as on different networks?

  I don't know if it will work in your particular situation, because it depends on whether or not it has access to an Ethernet connection.  You could try the connected printer to an Ethernet port which would be on the same network as the PC and then access it by IP addressed assigned to the Ethernet address.  Once the integrated Web server load, you can manually set the wifi information and then return to the wifi.

• Web services Officejet 8100 printer cannot connect to the server

  I tried to set up ePrint - HP connected on my Officejet Pro 8100, which, for some reason, it's own decided to disable the eprint service. When I try to connect to get the confirmation code for HP connected, this message appears

  "Unable to connect to the server.

  Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer.
  If your network requires a proxy server address to connect to the Internet, click Proxy enter or check your browser settings. »

  I tried all of the suggestions posted in this post-

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile-printing-and-ePrintCenter/cannot-connect-to-se... - but none solved the problem.

  Apart from not using web services or filing a compliant under the terms of the UCC for the guarantee of marketability, what to do next?

  Hello RealGomer,

  Welcome to the Forums of HP Support!

  If I understand your message your Officejet 8100 is more connected to the Web Services and you have tried to assign a manual IP address of the printer.

  In the link you provided I have not seen any information about which server DNS has been used, because it is usually the cause / root of the problem, try to enter the DNS name of 8.8.8.8 & 8.8.4.4. To enter, you must be in the Web integrated to the network printer server.

  If this DNS information do not resolve, I'll get another for the DNS installation program.

  See you soon,.

• Cannot transfer the file to WCS 5508 - Code file transfer failed - unknown error - refer to log

  Hi all

  This is my first time here posting. I have some difficulty to transfer files to my WCS 5508. My intention is to upgrade to

  6.0.196.0 to 7.4. We recently bought 2602i access points and we need to update our controller software so that the controller save the new access points. I also improved the interface controller 7.0.240 WCS software.

  However, I have not been successful transfer the file to the controller for the upgrade.

  I have tried everything I know:

  * transfer the file of different programs including tftp32d and solarwinds TFTP server

  * transfer the file of different applications such as FileZilla and FTPD FTP server

  * transfer the WCS web interface file

  * running a direct connection to the WLC with a static IP address on the interface

  * verified that there are no interfering firewalls with transfer

  * adjusted times waiting and pads as a result

  I get no error message on my software FTP or TFTP, which would indicate something wrong with the applications. I think it is a bug with the controller.

  The transfer reachers about 97MB before it fails.

  Here are the error messages I get when I run "transfer of debug output all" from the CLI of the controller

  I feel I forgot something...

  # #debug transfer all out #.

  * Did not write body

  * Only partial file received: 97086398 bytes

  * 23:55:26.248 Mar 06: ftp operation returns 23

  * 23:55:26.253 Mar 06: tftp = 4, = file_name / AIR-CT5500 - K9.aes, ip_address = 10.5.1.18,.

  MSG = unknown error - refer to log

  * 06 Mar 23:55:26.470: upd_get_code = 4 (target = 33744 msg = unknown error - see t

  O log)

  * 06 Mar 23:55:26.470: RESULT_STRING: % error: file transfer has no codes - Unknow

  error - refer to log

  * 06 Mar 23:55:26.470: RESULT_CODE:12

  * 06 Mar 23:55:26.470: ummounting: DLG = / mnt/applicati

  on

  * 23:55:26.577 Mar 06: finished remove

  % Error: Code of file transfer failed - unknown error - refer to log

  #############################################################

  Here's my output sysinfo sh.

  release of sysinfo #show # #.

  Name of the manufacturer... Cisco Systems Inc..

  Product name... Cisco controller

  Version of the product... 6.0.196.0

  Bootloader Version... 1.0.1

  Retrieving Image Version field... 6.0.182.0

  Firmware version... Console USB 1.3, 1.6 Env FPGA,

  1.27

  Build Type....................................... DATA + WPS

  Name of the system... WCS_01

  Location of the system... G5

  Contact System...

  ObjectID of system... 1.3.6.1.4.1.9.1.1069

  IP Address....................................... 10.1.0.17

  Last Reset....................................... Software reset

  Time system... 0 days 0 h 53 min 10 dry

  Location of the time zone of the system...

  Base boot license current level...

  Current license type Boot... Permanent

  Next time you start level license... base

  Next Type of license to Boot... Permanent

  ###############################################################

  Any suggestions? Am I missing something?

  Well... Since you're WCS, v7.0.x is the only code that are supported for the WCS.  Look here.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/compatibility/matrix/compatibility-matrix.html#18972

  So the trick to this is downgrade to v7.0.x and add the WLC WCS and then go to v7.2.121.0.  As long as the WLC is added and is attached to the WCS, you can upgrade.  If the WLC is not attached, you will never get to add with a more recent version of the code.

  Thank you

  Scott

  Help others using the system of rating and marking answers questions like "answered."

• Posture EHT IE Web redirect Win7/8 with Anyconnect already installed?

  Having a problem where I have Windows 7 and Windows 8.1 clients connecting to the wireless network, they already have Anyconnect 4.3.x installed with posture ISE seeking AV installed.  When the AuthZ for EAP chaining rule see posture status equal to a stranger when a user logs into it immediately turn on IE and tries to do a web-based ISE posture check.  But if you wait a little, Anyconnect runs and performs a check of posture ISE itself and ends.  And then of course a certificate of authenticity occurs and the status changes to access compliance/permits.  But this IE window for ISE posture is still sitting there.

  Its crazy my simulated production group.  Its as web redirection does not know that Anyconnect is already on the box.

  I talked to TAC, they suggested, it is a problem with IE and there is no config ISE to correct this problem.  Does anyone know the key "reg" to disable this behavior?

  Also, my concern is that once this behavior is disabled in Windows 7 and Windows 8.1, users then when connecting to networks managed by ISE comments won't redirect web authentication.  However my Windows 10 users don't see never the ISE web posture auth redirect, but they do not... as expected... a redirect comments network web auth.

  Outside by his summer suggested that the "reg" windows 7/8.1 key 'HotspotAuthentication' is the problem.  Set this to zero does not solve the problem.  Active Software\Policies\Microsoft\Windows\HotspotAuthentication = 0

  source of confusion.

  Any help is greatly appreciated.
  EI

  As a side note I would be thrilled to be in the image of all the files in the machine and not necessary to use the provisioning client to trigger the posture of the ISE, feature request.

  If remember correctly,

  If your network changes, windows did a test NCSI (network connectivity status indicator),

  with DNS and one http request. This forced test your browser to bring up a window.

  I think you have three choices:

  -If the machines are managed by you

  1, you cah turn off this feature. In this case, you lost the internet detection windows feature

  2, you can change the address shown by default http://www.msftncsi.com (multiple ip) to a simple outside IP, and after that you have an entry to the ACL redirect to allow traffic to this IP without redirection

  If the machines are out of your control

  3, you can build a complex ACL redirect, witch will allow traffic to the ip address that is resolved by www.msftncsi.com. I have a large collection of a (attached) gethostbyname crontabbed, he entered 246, but you can reduce it to the largest subnet 4-5. I think that it is not a big risk to allow this traffic when the redirection is active.

  http://blog.superuser.com/2011/05/16/Windows-7-network-awareness/

• Run a workflow form again vSphere Web client?

  It seems not possible to run a workflow of web to vSphere client.  Am I missing something?  We really want to start using the web client vSphere integration but the lack of this feature makes it really difficult.  Are taken in charge of canceling a workflow running and for answering a question, but not to run again.

  Yes, "rerun" is not taken in charge, like the other features available in vRO Interface Java client.

  These 2 customers are 2 completely different code bases/Technology batteries, and it is difficult to keep in Sync feature-wise. Supporting the use of vRA case is one of the main goals for vRO under vRA become internal consumption of vRO. vSphere client Web integration is not a major use case for HRV and thus maintaining at the same level as the vRO Java client is not on the top of the list of priority tasks.