WCV54G & new firmware & FTP from Linksys

Similar Questions

• Adding a new wireless router from Linksys at an old Linksys router system

  Hello

  I'll install a new standalone DVR to a home video surveillance system.  I would like to be able to access it with my current PC so I would like to add a Linksys wireless router.

  I'm currently 1 Linksys Wireless - G Broadband Router with speed Booster model WRT54GS-BP and 2 models WMP54GS from PC that have PCI adapters Wireless-G with speed Boosters (802.11 g).  I had these installed since 2006 and although they are no longer supported I really want to have to upgrade because they work very well.

  My questions are:

  If I add a new Linksys router to my new DVR will be able to communicate with my older Linksys router and adapters?   If Yes, what would be the best new router Linksys type should I buy?

  Thanks in advance for any help and advice.

  Hi Dan,.

  Please excuse the delay of time here, but I had a hard time to post a reply.  I added Ethernet Wireless-N - WET610N bridge.  When I installed the software, I kept getting error 102 - an error occurred communicating with your device.  I called Linksys for help and the tech had me make a few changes to the router 192.168.1.1.  I was able to install the Web Service to display the camera on both of our PC.  So the addition of the WET610N allowed us to access the DVR wireless!

  Thanks a lot for all your help!

• Can not set up a new Smart Wireless of Linksys account with my new router EA6500.

  It started with an EA6350 router that I bought last month. It was working fine and my acount of smart wifi linksys worked very well and I've been using all services without any problem. I found a better offer on EA6500 and since it was less than 30 days, I went back my old router EA6350 and bought EA6500 and guess what each unique feature works very well except for the fact that this isn't to let me create new account Wifi Linksys niether afford card from my old account with the new router. Every time I reset the router and start a fresh install and get to the point where it ask me to create the account, it is for me very stupid mistake saying 'your router is not connected to the internet' which is not true because I can browse the internet explore even without any problem.

  I took help thru time camps technical cat, also called the linksys support but no one is able to resolve the problem so that. Rather they make me to reset my router again once I get the same message and we are not good with the solution. If what someone has the slightest idea or idea or some thing to try please let me know. Thank you.

  Problem is solved.

  I updated the firmware by accessing the router locally and manually downloaded the new cabinet where the Linksys.support.com file and then installed. After that, all the errors I was getting were gone.

  Solution simple but not to think at any time.

  I hope that it might help others who have done the same kind of problem.

  Thank you!

• How the new firmware of tftp to wag160n?

  Hello

  My WAG160N has same problem as described in this post from xellmon

  http://forums.linksysbycisco.com/linksys/board/message?board.id=DSL&thread.id=9859 .

  The cancellation of my warranty but new. (void warranty in a storm). Desperately trying to resurrect WAG160n.

  Details of the device

  Annex WAG160N has

  Firmware 1.00.10

  Is it possible to new firmware tftp in the unit?

  If so, how the new firmware tftp?

  what firmware file I need to download?

  Thank you

  Download the firmware for Annex WAG160N has... Try this link and check if it works... If this isn't the case, then, you need to replace the router.

• cannot no new firmware tftp to e2000

  I'm Flash a firmware for an E2000 using the TFTP (supposedly) integrated in the bootstrapper.  I don't seem to have no luck.

  When I turn on the router, it is not even repsond ping 192.168.1.1 for 12 seconds, time at which it is already started in the currently installed firmware.

  I tried just pushing the firmware several times with a 1 second delay and turn the router but he abandoned only about 12 seconds later with an invalid password, because at this point, the router is started.

  What Miss me on the ability to Flash this thing?

  So my goal here was to get OpenWRT on this router, but the OpenWRT firmware for this router doesn't suppor flashed from firmware 'factory' Linksys.

  But DD - WRT firmware does.  So I updated (because DD - WRT Linksys firmware update) to DD - WRT first.

  But ultimately I wanted to OpenWRT on it, so I copied the firmware OpenWRT to the router and then used mtd - r write /tmp/openwrt_firmware.bin linux, but it was actually the wrong thing to do.  I guess that invalidated the image on the router and when I restarted it, the bootstrapper tftp server was actually ready to take a new firmware.

  In any case, I OpenWRT on there now and this router now acts as a distribution switch of VLAN (tagged trunk in, 4 networks not marked on) for my house.

• New firmware for Toshiba 39L4333DG

  Hello

  I'm new here. Could you tell me please when I can exepect new firmware on th TV?
  It's almost a year since the last update at the same time all of my local vod applications stopped work correctlly.
  A vod owner told me that you do not support DRM features that cause the app does not work properly
  (local names of applications are ELPI, player, vod onet)
  Rafal

  Hello

  I had a question for one of Toshiba TV games firmware, you'll make new firmware for either of the sets of TV from Toshiba?
  Or you just stoped doing this.

• Toshiba 46TL838 - I need new firmware

  Hello

  TV: 46TL838
  6.0.08.1 worm.
  IM from Poland - Polish version /.

  My TV does not have to update the menu. IM connecting to the ethernet LAN

  I need minimum 6.4 version because in my sweet 3D option does not work on the USB key.

  I can guarantee to the tv and I have to take it to service support but I have a long way to the service.

  I'm surprised that there is no firmware on the Toshiba site. I was disappointed.

  Please help me.

  Hello
  Especially the firmware for all Toshiba TV European models can be downloaded from the Toshiba page
  http://www.Toshiba-OM.NET/firmware.php

  But for the two sets of series RL838/858 and TL838/868, you will need to use one of the following methods:

  * Method 1: *.
  _Automatic network warning

  When the TV goes to sleep the network SW update is checked on the power on the TV, the following message will appear (after 1-2 minutes):
  A software update is available. You want to upgrade? Yes/No, to update your TV select Yes.

  * Method 2: *.
  _Manual network warning

  In order to make searching for a firmware update anytime TV in time to follow the instructions below:
  Select Setup-> Software Upgrade menu-> Select network update
  The TV will then focus on the network for the new firmware and if possible a update command prompt will appear

• KDL46V5100 and new Firmware

  I downloaded and updated firmware ER4.12 - E328 on my KDL 46v5100 connected to Frontier Motorola 7216 - 1 FIOS box via a HDMI cable. Sporadically, he loses the image and sound after the update. Before updating the firmware to ER4.12 - E328, everything was fine (I thought it would help distorted blocks in the image).

  Technical support told me to buy a new HDMI cable and it was no help. I had Frontier replace the FIOS 7216-1 Motorola box and I still have the problem. I checked with a Toshiba TV and also no problem with FIOS box. It seems that the new firmware has a problem with the Motorola 7216-1

  The software update may interrupt your HDMI input source. To ensure the proper functioning, we recommend to perform a full reset of your HDMI input source after completing the software update.
  Note: Depending on your configuration, you might have more than 1 source connected to your TV. This could be your cable or Satellite, Blu - ray, DVD or game system box.
  1 turn off the TV.
  2. unplug the power cord TV taking about 5 minutes.
  3 reconnect the power cable TV on the wall socket.
  4. unplug the power cord from the wall outlet HDMI input source.
  5. reconnect the input source HDMI power cord to a wall outlet.
  6. wait for the HDMI input source start completely.
  Note: It may take about 15 minutes according to the HDMI input source.
  If the problem persists, please contact our Technical Support team for assistance: http://esupport.sony.com/US/perl/suppor... KDL46V5100

• New Firmware?

  Hey,.

  Uguyz think he'll bea new firmware for the sansa e200 series v1?

  Of course, as soon as these guys work out of their problems.

  The Sansa e200 series is discontinued, further development of the firmware is unlikely, but not impossible.

  For the v1 device, firmware 01.02.18 or 24 are fairly stable; for v2, the 03.01.16 is excellent.

  Yes, I have a laundry list of possible settings, but the concentration of resources on these earlier devices away from the new generation of Sansas.

  Bob

• EA6500: What changes or improvements of the new Firmware offer?

  I just connected to two of my three routers EA6500 and noticed that they have new firmware: 1.1.29.162351. This new version gives anything of note... or... did some minor changes?

  See the release notes for the update here:

  http://support.Linksys.com/en-us/support/routers/EA6500

• New firmware, new problems with EA4500

  I logged this morning to a new firmware on my EA4500. I have disabled the automatic upgrades when I got the device because at the time of the hidden networks was not supported by the firmware of the Wi - Fi chip. Needless to say I was shocked when I logged in this morning. I have no idea how the new firmware had updates since I was the only one on our staff with the password on this device.

  However, I went in the new admin panel MAC filtering section and tried to add a new device to our list. I get "Unexpected error" 2177 when you try to save the updated list.

  Show details: / jnap, macfilter, SetMACFilterSettings - status: 200 OK Date: Tuesday, August 7, 2012 06:01:59 GMT Server: lighttpd/1.4.34 connection: close Content-Length: 42 Content-Type: application/json; charset = utf-8

  I can't go past this screen to save the MAC address on the list of filters. Any ideas? Current firmware is 2.1.41.162351

  Try the Revert to previous FW?

  Safely update FW, I recommend doing the following:
  1 save the router config to the file first using IE or FF with all modules disabled security.
  2 factory reset the router with all devices disconnected or turned off accept for 1 Wired PC.
  3 reload or update the FW using IE or FF. Just download the FW file to your wired local LAN PC.
  4 factory reset the router and then set up from zero all first and test with loading saved configuration from the file. Check if problems are solved before loading the saved configuration file.

• BEFW11S4 v4 firmware upgrade from 1.45.3 to 1.52.02 not

  I had some problems with my router reset so I decided to update the firmware.  I am currently on version 1.45.3, July 1, 2003 and I wanted to update to 1.52.02 4/07/2005.  I downloaded befw11s4_v4_v1.52.02_000_FCC_code.bin from Linksys website and selected in the http://192.168.1.1/Upgrade.htm.  The progress bar will start to move and when it reached about 75% I get redirected to http://192.168.1.1/Upgrade.cgi which is a blank white screen.  If I go to http://192.168.1.1/ and check the firmware version, I still see 1.45.3. Does anyone have an idea what's wrong?

  Problem solved.  The search through the discussions at the forum I found someone with a similar problem and a solution posted by saber_tooth.  I copied it below:

  saber_tooth wrote:

• New content directly from the server

  How can I force my browser to download new content directly from the server? It was possible to do so using the SHIFT key pressed and make page reload at the same time. I tried and it didn't work. I'm doing something wrong?

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

• New Firmware for the 32TL933 3D LED

  I found at this address 'http://www.dl.toshiba.com/DLY/index.jsp?region=GB&lang=FR', a new firmware for
  32TL933G (G for the other Europe).

  is it compatible with my 32TL933F (F for France)?

  Thank you

  Good question.
  If nobody here can offer you the right answer, I recommend you contact the France Toshiba service provider and ask them. They have direct contact with Toshiba France and can verify this information or perhaps send you a most recent and the most recent update for your Toshiba TV.

  By the way: you have problems with your TV?

• Camileo H20 - new firmware

  Hi, in my view must issue new firmware, which addresses the following issues:
  * - Files AVI unsupported-> avi is invalid *.
  * - Date and time display will not turn on *.
  * - There is no difference between PAL and NTSC settings (still 30 fps) *.
  * - Setting is reset after switching camera market (quality video, stabilizer, macro, flash,...) *.

  * Please, technicians and software developers issuing a new firmware that will fix the above problems

  Please other owners of this type of device, to join the discussion on these issues.

  Thank you very much
  Jirka

  Agree.

  Still more to add:

  -Secret function (undocumented) on firmware version (low pressing button more in combination with the wheel upwards at the same time) must be placed in the regular menu (say under menu of PARAMETERS such as the VERSION of the FIRMWARE.
  -Also autofocus (enabled/disabled) must exist in the menu
  -Combination of bottom more button and jog now could be used for manual focus adjustment (if auto-focus is turned off in the menu)