WD passport external drive breaks down computer hp amd athlon, vista 32. Get the computer running again after that 3 full restores.

Similar Questions

• 3200 Maxtor disk external drive (installed) does not systematically start upward. I get the message "code 10". How can I fix it?

  I did troubleshoot directions, uninstalled and reinstalled.  Also disconnected and re-connected.  Sometimes it works, but not always.

  It is a new problem.

  According to this thread support, the drive doesn't have enough power to start, and sometimes the player not spin up. It seems that, over time, the power supply provided by maxtor, when you bought to deteriorate and no longer provide enough power to the drive. When the player does not have enough power to the adapter, it can try to draw power from the USB. When the player draws too much error, windows it disconnects and gives you the error code. try to find another 12v adapter that matches.

  http://forums.Seagate.com/T5/other-external-products/personal-storage-3200-error-code-10-start-up-error/m-p/34358/highlight/true#M1258

• System Restore - question: the computer is not protected. Restart the computer and restoring the system running again. "

  When I run the SYSTEM restore, I get the following message: "the computer is not protected. Restart the computer and restoring the system running again. "I already did and it does not help.  I have Dell Windows XP

  Hello

  Try this link it may be useful you http://www.kellys-korner-xp.com/xp_restore.htm

  Under the heading, enable and disable the system restore... Reg fix?

  Also, it wouldn't hurt to run for malware, spyware, etc...

  Concerning

  GT4U

• My user folder displays the data of 30 GB. Actual data are only 2 GB. I want to wipe my drive C of hidden data. How can I get the details of 30 GB of data shown in the properties of the folder

  My user folder displays the data of 30 GB. Actual data are only 2 GB. I want to wipe my drive C of hidden data. How can I get the details of 30 GB of data shown in the properties of the folder.

  Hello

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Here's how to understand Treesize Screenshots:

  http://www.Jam-software.com/treesize_free/screenshots.shtml

  ____________________________________

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  See you soon.

• I opened my photos of my SDCard with File Explorer, select them all, then I select move to fill after that I saw the bar of loading with the green line. After that all my photos from my computer disappered and were removed from my SD card. Please, he

  I opened my photos of my SDCard with File Explorer, select them all, then I select move to fill after that I saw the bar of loading with the green line. After that all my photos from my computer disappered and were removed from my SD card. Help, please

  I looked everywere in my computer, but they are not found

  I bet that you have selected the folder Adobe Bridge CC or CS6, and it would be in there under Program Files/Adobe/or Program Files (x 86) / Adobe /.

  Move to... in the file Explorer apply only to records not the bridge program.

  You open Bridge and Photo Downloader allows you to move pictures from your SD card in the deck (also called import)

  Gene

• I need to transfer my docs from old XP to format external drive to new computer Vista.

  This XP formatted external drive is partitioned into several directories. They stored the files wmv, songs, photos, etc.

  When I plug in USB, Vista computer said that it has found the driver DEVICE USB IA37L080ATVC07-2. But this hard drive storage has not shown in the file manager.

  Since my Office XP no longer works, I took the primary hard drive and a plan to set up as external drive to retrieve the documents and files...

  Does anyone know how to make a Vista machine to copy files from external hard drives in XP?

  Open "Disk Management" and see if the USB drive is listed, if so, then simply assign a drive letter to each partition on the USB drive. Then, open Windows Explorer and copy your files on the computer of Vista Basic.

  J W Stuart: http://www.pagestart.com

• Together-hard drive breaks down when the resizing of the IDE

  Hi all

  I'm trying to resize a thin provisioned IDE drive using the following command:

  * Set-hard drive - HDD (Get-disk hard - VM myVm) - CapacityKB (37 * 1024 * 1024) *.

  However, I get the following error message when you try to do:

  Invalid operation for the device '0'

  The maximum size that works is 8GB (8 * 1024 * 1024) which is be the default size for the virtual Windows XP machine I created.

  Execution of the order, even against a SCSI drive works fine.

  I'm initially create virtual machines with a disk of 1 MB and resizing in order to reduce the time of provisioning. Someone has seen this before or know a work around? We currently lack of vSphere 4.0.

  Thanks in advance

  Not sure if this is a bug or by design, it appears however that you cannot resize an IDE drive. (Interesting that you mentioned that it works up to 8GB).

  One solution is to convert the drive.

  There is a post on this topic at Yellow brick resize your virtual IDE hard drive

  André

• What happens to my key if my hard drive is formatted, the key will work after that my hard drive is formatted?

  I want to know that my synchronized computer key will work if I format my drive hard because when the hard drive is formatted, then the key code is deleted, even though I saved my key will it work after formatting hard drive. Let me know.

                let me also know that what will happen if I lose the key I had saved then how will I access my synchronized computer .
  

  Hello!

  Can you indicate the information where it says that the information is stored in our servers? If that mentioned anywhere we need to clarify.

  The only reference I found is here: How can I set up Sync on my computer? and it is specifically stated that the information is synchronized on devices through our servers. If it is misleading, let me know so that we can reword it.

  Regarding the storage of the key in your pen drive or any other backup system: this is the best solution and it will work correctly after you format your computer. The key does not change when you format your computer, so you will have no problems after all.

• I had a virus on my computer acer laptop and thought restoring factory setings it would solve the problem. It wiped everything, including my computer windows. How can I get my computer running again and what I look at?

  the screen that appears whenever I start my computer says "windows boot manager, windows did not start." a recent hardware or software change might be the cause.

  fie: \windows\system32\winload.exe

  status: 0xc000000e

  Info: the selected entry could not be loaded because the application is missing or damaged.

  A factory restore should you restore your computer to its state when you bought it. If the factory restore did not work, you have to be a problem with the hardware or the original image. Do factory restore using the recovery disks, not the recovery image on the hard drive. Alternatively, you can contact Acer technical support about the error since it is their original which has been restored. MS - MVP - Elephant Boy computers - don't panic!

• Computer running slow after the removal of McAfee.

  A few months ago, I removed McAfee from my computer (windows vista). Since then, he has really slow, constantly "not responding" and takes about two hours to get on the same page (before crashing again). Initially, I removed the program via the control panel. When I look at the performance data, I've got a base score of 3. The report of health system tells me that the beginning we is slow because of 'on-access scanner service', "mcshield.exe file name." I tried the selective startup options, try turning it off, but I can't find the program.

  I also ran the McAfee tool (from their website) to remove it, but no luck.

  Can you help me? He drives me crazy.

  Hello

  What did replace McAfee with your antivirus?

  Logon as ADMINISTRATOR

  Run the tool by using this method:

  Download - SAVE - go to where you put it - right click it - RUN AS ADMIN - when done REBOOT

  McAfee removal tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  =======================================

  If necessary:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  When you are free of this program run these:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows 8. The mouse cursor disappears after that my computer sleeps and wakes up then.

  I unchecked property "mouse shadow."  After about 5 minutes of my violin with the other properties of the mouse, the cursor appears again.  My computer is brand new.

  Howdy,

  I too have been looking for forums and playing with the power settings for days - it was driving me crazy!

  I happy to report that I found a work around for this problem.

  Simply plug your mouse / KB in a USB hub - I got a hub powered bus of really cheap 4 ports (one that does not require an external power supply). If you like your classic Intellimouse Optical as I do, it may be the solution for you.

  Hope this helps someone.

  See you soon.

• Could not get the internet/wireless connection after you installed new hard drive?

  I have a HP Pavilion Entertainment PC (dv6736nr), Windows Vista laptop.  The hard drive crashed and I got a new installed.   I set up my wireless connection, even that is on the other 4 computers in this building (my desktop computer running win7 netbook win7 running 2 computers of the landlord, winVista running - they have comcast modem,? a good router) when I set up the wireless connection, it connects only 'local', no internet.  I researched this some, tried all the places with a parameter that can be a problem, but nothing helped.  What the hell did I miss?  The connection is good because it works on my desk, on which I write, as I said. To my knowledge, the hard disk the the wireless are not connected; or is it? Any help, the concrete steps that I take on my laptop, the settings themselves, would be greatly appreciated.

  Hello:

  If your laptop computer is the Atheros wireless card, you probably just update the driver.

  The symptoms you listed seem to indicate that is the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99068-1&cc=us&DLC=en&LC=en&OS=4062&product=5185745&sw_lang

  Paul

• error message received when downloading CC PS I needed to upgrade my display driver.  I've now updated - how can I get the improvements that have been disabled on initial installation?  I use Windows 7-64 bit.

  I received an error message telling me that my display driver was not at the height, & that some improvements would not be enabled.  I've since updated my display driver.  How can I get the improvements that have been initially disabled?

  Thank you...

  If you have all the features you need and there is no problem.  let alone ps.

• Files could not be copied into a WD My Passport External Drive because of an error 0x8007045D i/o device

  I tried to copy files from my hard drive into an external Western Digital My Passport drive. But, as I was watching the progress of the copy of the files, I noticed that only four files have been copied to the external. A large majority of the files could not be saved due to an error 0x8007045D i/o device. I noticed it's the same error I get when I shut down my computer (in this case it is said error of breakpoint or something). Drag / drop files did not work. Still later, my USB key no longer works.  I tried to check my hard disk for errors, but my camera came out clear.

  I use Windows 7 Professional 32 - bit, E5800 Pentium Dual Core and an Asus motherboard.

  How can I get rid of this error because I need to transfer my files specifically in the external hard drive?

  Help, please. I'm not very tech savvy so simple instructions the better.

  Hi @roryheadmav!

  You can try the basic steps in such cases troubleshooting - first try to connect the hard drive to an another USB port of the computer and if possible with another USB cable.

  I hope that you will be able to transfer all the data you have, but in case it does not work, you can also boot into safe mode and try to copy the same and see if you can successfully complete the copy error-free operation. You can follow this article that describes how to enter Safe Mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Hope this helps and let me know how it went.

• How can I print my lists of distribution for later use if the drive breaks down?

  Had a problem with the hard drive on the new computer. Company reloaded hard drive. Lost all email addresses. Had to manually type in THE addresses again. Is there a way I can save my addresses to disk or print it out on paper for later use if I lose them again?

  Open the address book window.
  Select tools-export
  Select the type of file.
  The name of the file.
  Choose where to save it.