Could not get the internet/wireless connection after you installed new hard drive?

Similar Questions

• Error - DRIVE - no IS NOT READY - the SYSTEM IS STOPPED after having installed a hard drive.

  Original title: need HELP just installed new HARD DRIVE.

  I adjusted has installed a new drive WD Desktop Hard in a Pent III; TRIED to raise the HD; computer and then tells me that the TRAINING SYSTEM - no IS NOT READY - IS INTERRUPED. I checked all cables & connections; & Yes by turning the hard drive. What am I missing or very probably wrong. Any HELP.  Sincerely of Merlin

  Hi Merlin,

  Thank you for the information.

  Have you tried to run a check disk from the BIOS (Basic Input Output System)? If this isn't the case, you can try to do a hard drive from the BIOS test & see if the problem still occurs.

  If you are not comfortable with the BIOS, you you contact the manufacturer of your computer for help.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless connectivity after you install a new LAN modem.

  Installed new DSL modem/wireless router. Using WPA2-AES security for the wireless. All new wl in my local network components reacted very well. 2 units of wl, Sony VAIO TR3 and netbook Acer Aspire One, does not connect to the network. Both use XP svc pk 3. Pswd screen Sony allows WPA2-AES and I entered the pswd. The netbook has entry field for WPA-TKIP. I enter the password anyway. Neither connects via WIFI (both connect via ethernet very well).  Vietnamese to the new modem/router installation, both of these units connected to the local network very well. The previous security with the router was WPA-TKIP. Any ideas?

  Hello

  Different wireless routers treat differently security. Many cannot deal with double level of encryption.

  First of all the stage newspaper with a wire to the router and disable security.

  Make it work temporarily with open connection.

  Spend on wireless security, then to use the WPA - PSK or TKIP - which is in the router to two computers.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Could not get an internet connection after installed antivirus software.

  I tried to install a software antivirus (Vipre) and it asks to restart the computer, and I did. When I restart the computer, the software could not continue for a reason, and I found that the computer could not get the connection with internet ("limited access"). While my other computers are still good connections with internet (wifi). Please tell us how to solve this problem. Thank you.

  Hello

  1. are you able to surf the internet?

  2. you use Internet Explorer browser to surf the internet? If so, which version?

  Let us try the following and see if they help.

  Method 1: See the following article:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Uninstall and reinstall wireless card driver and see if that helps.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network card, right-click the wireless adapter option

  (d) click on uninstall

  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: You can also try uninstalling the anti-virus Viper software and see if that helps.

  Reference:

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

• Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.

  Loading of the Internet

  Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.  The site requested is either not available or cannot be found.  "Please try again later ' this happens for all sites, I try to download from... Please help.

  Hello

  To work around this problem, follow these steps:

  1. start Internet Explorer.
  2. on the view menu, click Internet Options.
  3. on the Advanced tab, clear the do not save encrypted pages on the
  disk check box.
  4. go to the page where you received the error.
  5. right click on the file link, click on save target under, select one
  destination and then click Save.
  Good luck!

• Why do I have to restart my internet wireless connection after restart of Windows Vista?

  why I have to restart my internet wireless connection after restart Vista

  Hello

  Second time to answer that line however initially seems to have disappeared. The message displayed
  upward in my Threads as if there was a response.

  -----------------------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• "Adobe Acrobat Reader DC cannot open 'amy application' because it's a non supported file type or because the file is damaged."   I received this message during indexing on my computer.  I could not get the message, so I uninstalled Adob

  "Adobe Acrobat Reader DC cannot open 'amy application' because it's a non supported file type or because the file is damaged."

  I received this message during indexing on my computer.  I could not get the message, so I

  uninstalled Adobe.

  After you have uninstalled Abobe, I was able to get all my jobs and applications (with the exception of adobe files).

  Then I tried to re - install Adobe, but who has turned to a complicated procedure.

  There are so many choices, and there are a number of downloadable updates. What was I guess what to do?   But I have chosen one of the Adobes and tried to install it.

  After that I don't know what happened.  All my desktop icons are now Adobe icons in place.   that is The Firefox icon is now replaced by an icon of Adobe.  It is the same for several other desktop program icons. (QuickTime, chrome, Internet Explorer, etc.)

  When I try to open the program by clicking on it, I get the above message.

  I went to the site of help from Adobe and read a complex string of instructions, including

  words like '% pdf', "DWROD" and, for me, other nonsensical words and phrases.

  Needless to say that the instructions were no help.

  I said all that to say this.  I want that my computer back.  What should I do to do?

  Sincerely,

  Ralph Thompson

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  [If you send messages by e-mail, please turn off your "sig file" function for display]

  This may help: Application, file icons change in Acrobat/Reader icon

• Windows XP does not display the available wireless connections

  I formatted my hard drive and created two partitions. Then I installed Windows XP in one of them and Vista in the other. Then only under Vista the network card works and I see all kinds of connections available. Where, in Win XP it will not display the available wireless connections. I have tried everything to try to activate my net work card but can't find a way to do it. Maybe Win XP a clean installation driver missing. Does anyone have any ideas? I have studied all the forums and that you can't find the answer.

  Thanks for all the ideas that I could research.

  Thanks, missing the driver for the Dell Wireless card. He wasn't on resettlement drive.

• Re-installation of creative suite all-in cs6, I get the error: Exit Code: 7 ERROR: DW013: could not get the root of inChildPath

  System:

  Windows 7 (Service Pack 1)

  3720QM-i7 CPU @ 2.60 Ghz

  16 GB OF RAM

  Adobe Creative Suite Production Premium CS6

  I got a computer breakdown and both after effects and the first started crashing after that.

  I uninstalled then and since then I can not reinstall. I get this error message:

  Exit code: 7

  ERROR: DW013: could not get the root of inChildPath

  I tried:

  1. 1- Repair of Microsoft Visual C++ Redistributable Packages
  2. 2- Uninstall Adobe AIR, then reinstall the AIR and the Adobe help
  3. 3- I tried to use the vacuum (running it as an administrator but but it does not open)

  What is my next move?

  I have work to do.

  Thank you

  Stefan Vanderland

  Code 7 https://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html

• Unable to get hardware information for the selected with vmware converter 5.5 computer (could not get the ability to \\.\PhysicalDrive0: error opening peripheral drive: 32 an unknown error (0 x 20) (32))

  Hello

  I'm doing a P2V with vmware converter standalone 5.5

  The source is the same machine that hosts the vmware converter 5.5

  The operating system is W2003 which acts as a domain controller

  VMware converter is launched by the administrator account.

  The error that I see on the balls of vmware - converter.worker is:

  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:41.155 + 01:00 [warning 04344 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:41.155 + 01:00 [04344 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:41.170 + 01:00 [info 04344 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2014 02-13 T 17: 36:41.170 + 01:00 [04344 error "Default"] unknown exception when calling VMOMI method queryComputerInfo
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 WARNING 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:56.155 + 01:00 [info 05648 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  This had already happened with another server (also W2003 DC), but the hardware was completely different; Unfortunately, I wasn't able to solve this year here.

  Any help or advice would be appreciated, thanks in advance

  Thank you for all your help

  I finally found the guilty service.

  It was pcmonitor monitor/remote control software. Once I stopped it is service vmware converter could get the capacity of the physical drives.

  It is rather curious because I made several servers P2V conversions using this software (so far the last one two weeks ago - the difference between that server and this one was that the first was not a domain controller).

  Hopefully this thread will help others in the future.

• Event generated by the user 'anonymous' the host 'CIS '. Could not get the reference.

  Hello
  
  We have integrated our portal customized with the AAU in document taskflows webcenter application.
  We are not able to view the Soum, extracted from the Complutense University of MADRID. Here's the error to get connected UCM whenever we access the application.
  
  Event generated by the user 'anonymous' the host 'CIS '. Could not get the reference. Can not read the file. [Details]
  An error has occurred. The stack trace below shows more information.
  
  ! csUserEventMessage, anonymous, CIS! $! csCollectionUnableToGetReference! csCollectionCannotRead
  intradoc.common.ServiceException:! csCollectionUnableToGetReference! csCollectionCannotRead
  * ScriptStack COLLECTION_GET_REFERENCE
  3:getReferenceMeta, * no captured values *.
  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
  at intradoc.server.Service.buildServiceException(Service.java:2260)
  at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
  Collections. CollectionUserHandler.getReferenceMeta (CollectionUserHandler.java:1765)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:600)
  at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
  at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)
  at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
  at intradoc.server.Service.doCodeEx(Service.java:533)
  at intradoc.server.Service.doCode(Service.java:505)
  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
  at intradoc.server.Service.doAction(Service.java:477)
  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
  at intradoc.server.Service.doActions(Service.java:472)
  at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
  at intradoc.server.Service.executeActions(Service.java:458)
  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
  at intradoc.server.Service.doRequest(Service.java:1890)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
  at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
  at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  
  Kind regards
  Francis P

  What is the security group of your records? It is public.

• I can hear a wav file, but could not get the video from my camera.

  original title: file WAV on Vista

  I can hear a wav file, but could not get the video from my camera.

  I have windows vista?

  Hello
  WAV files will be audio only.
  You can save this file as an MP4.
  B Eddie

• I have a 64-bit system running Windows 7. I could not get the AutoPlay to open whenever I insert a CD or a DVD.

  I have a 64-bit system running Windows 7. I could not get the AutoPlay to open every time I insert a cd or a dvd, I changed the settings to Ask Me to Windows Media Player to open with Windows Explorer... but nothing I tried introduced the feature of AutoPlay to life.

  Is there a solution

  original title: AutoPlay Windows 7

  It worked for me: I forgot where I got it, could have been here if it's a little different from what I've seen above

  PIECE AUTO REPAIR
  USING GROUP POLICY EDIT
  gpedit.msc in search
  Computer Configuration\ Administrative Templates\ Windows Windows\ Policies\ will disable Autoplay.

  In the REGEDIT HELP: Group Policy Editor is not provided with Windows Home editions, however, you can use regedit to achieve the same result.

  Open regedit and locate the following key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer

  Change: NoDriveTypeAutorun to 0 x 91

  If necessary, create this key as a DWORD.

• Spore origans. But they could not get the disc to download

  Original title: I installed the origans downloads spores then tried to combine with my set of spore origal disc I can do that I prefer to use my disc that the download, but could not get the disc to download

  Windows 7 Edition home premium

  Hello

  EA Spore games are you referring?

  If you are referring to the games EA Spore, I suggest you check the link for support:

  https://help.EA.com/en/spore?sso_redirect=1

• •EPMCSS-05261: could not get the information of the Aboriginal group.

  Hello

  Recently, we migrated user 11.1.1.3 11.1.2.3 version version.

  I tried to open one of the groups and clicked on the tab user membership in the group. I got the error message in the new version 11.1.2.3 below.

  «•EPMCSS-05261: could not get the information of the Aboriginal group.» Error getting to some of the affected user entries. Check the configuration and user directory State.

  Please could you let me know why we get this error message and no impact on the safety of the user.

  Thank you

  Michel K

  Read through the following Oracle Support document - "EPMCSS-05261: could not get the native group information (Doc ID 1619561.1).

  See you soon

  John