WDS gives error of the last stage on Windows 2003 R2 (64-bit)

Similar Questions

• Cannot install the vCenter 5 on Windows 2003 Ent 64-bit

  Hello

  Anyone know what I can not install vCenter 5 Windows 2003 Ent 64 bit?

  I get:

  

  vCenter Server is not supported on this platform. Refer to the installation guide for the supported platforms list. Make sure that Windows is running not as a domain controller.

  I can confirm that is not running on a domain controller.

  Sen

  If you are running Windows 2003, it should be possible that your machine does not meet the req min for vCenter5 and could be less than 3 GB of vRAM and 2 vCPU as what Andre said.

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100) __Message: installation error prevented the service pack 2 windows systems (KB948465) _

  Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100)
  Message: Installation error prevented the service pack 2 windows systems (KB948465)

  http://support.Microsoft.com/kb/956702

  «Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: «0x800B0100»»

  Method for Windows Vista or Windows Server 2008 to resolve this issue, run the tool (Checksur.exe) system update. To do this, follow these steps:

  1. Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  http://support.Microsoft.com/kb/947821/

  "Description of the preparation tool system update for Windows Vista for Windows Server 2008 and for Windows 7"

  If the above solves the problem:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• After the last update of windows, I now shadows behide the fonts & photos

  After the last update of windows, I now shadows behide the fonts & photos. What has caused this & I can fix it?

  Hello

  What is your Windows operating system?

  Right click on my computer

  Select Properties

  Select advanced system settings

  Running, click on the settings button

  Uncheck show shadows under menus

  Disable shadows decline of use for the desktop icon labels

  Click on apply, Ok

  Click OK

• Mice are not appearing after the last update of Windows 8

  After update to the last version of windows 8, my mouse does not work on my computer no more. I use a "HAMA Optical Mouse AM-5000" and a 64-bit Windows 8 operating system to my office. Before the update, everything worked very well, but a little at the time (perhaps a week?) there was a software update that began when I shut down my computer for the night and after, my mouse wouldn't just appear. Then I want to restore my computer to before the update and everything would work fine. It happened maybe 3 times in the past week. Today, however, every time that I restored it to an earlier date, the mouse still does not. I tried the following things:

  Deactivation and reactivation of the mouse
  Uninstall the drivers and search for updates
  Try different mouse (2 USB, 1 green connector)
  Using the troubleshooting in the Device Manager tool, a fine of the question
  Non of them did it no matter what and I wonder if I'm the only one to receive the problem. and what I can do about it. Trying to navigate in windows using only the keyboard becomes very annoying XD.
  Thanks for the reply of Kevin,

  In the (Control Panel > system and security > Windows Update > View Update History) all there is "you have not tried to install the updates for this computer. There "18 updated important and 5 available optional updates to install, but I think that those who might be updates that have been the cause.

  In the (Control Panel > programs > programs and features > Installed Updates) there are a bunch of installed updates. The most recent is "Word Viewer 2003 Service Pack 3 (SP3): WDVIEWSP3" which has been installed on 26/09/13 and "update for Microsoft Windows (KB2889543)" which has been installed on 25/09/13.

  I downloaded the latest drivers from the mouse on the site that you have linked and no change. By chipset are you referring to the processor (Intel i7)?

• SQL Server 2005 unattended install using the script fails on Windows 2003 Cluster

  We strive to perform the installation without SQL Server 2005 via the script assistance, but the installation fails on Windows 2003 Cluster, we use Windows 2008 with HyperV running a DC with two nodes (all Win 2003). Script is...

  Start/wait setup.exe/qb VS = INSTALLVS SQLTEST = SQL_Engine INSTANCENAME = SQL123 ADDLOCAL = SQL_Engine ADDNODE = sqlnode-1, sqlnode-2 GROUP = SQL1 IP = 192.168.1.85, SQLNetwork ADMINPASSWORD = Windows8! SAPWD = Windows8! INSTALLSQLDIR=%ProgramFiles%\Microsoft SQL Server\ INSTALLSQLDATADIR = G:\SQLDATADIR\ SQLACCOUNT = SQLPASSWORD lab\sql_svc = Windows8! AGTACCOUNT = lab\sql_svc = Windows8 AGTPASSWORD! SQLBROWSERACCOUNT = SQLBROWSERPASSWORD = Windows8 lab\sql_svc! SQLCLUSTERGROUP = "lab\sql_grp" AGTCLUSTERGROUP = "lab\sql_grp" FTSCLUSTERGROUP = "lab\sql_grp" ERRORREPORTING = 1 SQMREPORTING = 1 SQLCOLLATION = SQL_Latin1_General_CP1_CI_AS

  Errors on the nodes:

  SQLSetup0008_SQLNODE1_Core (Local)

   Running: InstallSqlAction to the: 4/14/2012 22:56:39

  Installation: sql on target: SQLNODE1

  Waiting for remote setup (s) to prepare

  Remote Setup (s) is ready

  Problem of determining the State of the virtual server for the package: '1' because of the exception of data store:

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: CachedPropertyCollection::findProperty

  The source line number: 63

  ----------------------------------------------------------

  Could not find the property 'VsDataPath' {'PackageIdStateScope', ' ', '1'} in the cache.

  Source the name of the file: datastore\packageidstatescopecollector.cpp

  Compiler timestamp: Wed Aug 24 13:40:04 2005

  Function name: PackageIdStateScopeCollector::collectProperty

  The source line number: 115

  ----------------------------------------------------------

  dataPathValue is empty

  Cluster functionality detected: SQL_Engine

  Loaded DLL:C:\Program SQL Server\90\Setup Bootstrap\sqlsval.dll Version: 2005.90.1399.0

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: CachedPropertyCollection::findProperty

  The source line number: 130

  ----------------------------------------------------------

  Unable to find property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"} in the cache

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: VirtualServerInfo.IPResources

  The source line number: 113

  ----------------------------------------------------------

  Could not collect the property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"}

  Transact package threw an exception.

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\highlyavailablepackage.cpp

  Compiler timestamp: Mon Aug 29 01:18:42 2005

  Function name: sqls::HighlyAvailablePackage:manageVsResources

  The source line number: 490

  ---- Context -----------------------------------------------

  SQLs::HighlyAvailablePackage:preInstall

  SQLs::HighlyAvailablePackage:manageVsResources

  m_dataDirPath is empty

  Cluster API threw an exception during operations of virtualization.

  Package first notify: 13

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\highlyavailablepackage.cpp

  Compiler timestamp: Mon Aug 29 01:18:42 2005

  Function name: sqls::HighlyAvailablePackage:manageVsResources

  The source line number: 490

  ---- Context -----------------------------------------------

  SQLs::HighlyAvailablePackage:preInstall

  SQLs::HighlyAvailablePackage:manageVsResources

  m_dataDirPath is empty

  Cluster API threw an exception during operations of virtualization.

  SQLSetup0008_SQLNODE2_Core (Local)

   

  Local configuration can complement

  Running: InstallSqlAction at: 4/2012/14 23:23:57

  Installation: sql on target: SQLNODE2

  Informs the package is ready to start: 0

  Waiting for notification start installation

  Local configuration can begin installation

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: remotepackageengine\remotepackageinstallersynch.cpp

  Compiler timestamp: Wed Aug 24 13:40:17 2005

  Function name: sqls::RemotePackageInstallerSynch:preInstall

  The source line number: 128

  ---- Context -----------------------------------------------

  SQLs::InstallPackageAction: perform

  SQLs::RemotePackageInstallerSynch:preInstall

  Abandonment of the package: "sql", due to an error from the configuration of the host: 13

  Notify all ready to commit: 13

  Notify all ready to put end to: 13

  Waiting for notification complete installation

  Local configuration can complement

  Packaging return code: 13

  Complete: InstallSqlAction at: 4/2012/14 23:23:59, returned false

  Error: The 'InstallSqlAction' Action failed during execution.  Error during execution information:

  Target collection includes the local machine.

  -----------------------------------------------

  Error: The 'UninstallForRS2000Action' Action failed during execution.  Error during execution information:

  Action: "UninstallForRS2000Action" will be marked as failed due to the following condition:

  The condition 'rs has been correctly upgraded level.' returned false.

  Package installation: 'patchRS2000' failed due to a precondition.

  Running: ReportChainingResults at: 4/2012/14 23:24:1

  Error: Action "ReportChainingResults" threw an exception during execution.

  One or more packages could not be installed. See logs for details of the error. : 13

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\sqlchainingactions.cpp

  Compiler timestamp: 1 Thu Sep 22:23:05 2005

  Name of the function: sqls::ReportChainingResults: perform

  The source line number: 3097

  Please notify.

  Assani

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  Hope this information helps.

• The basic service of the TPM secure in Windows 2003

  The basic service of the TPM secure in Windows 2003 is configured to run automatically, but it stops. When you try to start it, I get the message "the TPM Base service on started and then stopped. Some services stop automatically if they have no work to do... "This is the normal behavior for this service? If supposed to work, what can I / check?

  Hello

  The question you have posted is related to the Server 2003 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Thank you.

• How can I buy the product key for windows 7 Professional 64-bit online

  How can I buy the product key for windows 7 Professional 64-bit online

  http://www.Microsoft.com/Windows/buy/default.aspx
  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  MS Windows 7 store price:
  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102
  Keys are not specific to 32-bit or 64-bit

• Expand the C drive in Windows 2003 Sp2

  Hello

  I need to expand a VM windows Server 2003 R2 C: drive using VMware vcenter convertor, fight, it doesn't did me not the possibility of increasing the C: drive. What is the alternative? or I've missed using the V2V? Thank you.

  kamran7446 wrote:

  Thanks for your reply. Yes, it's showing as unallocated, but because it's a system (C:\) drive I can't extend it by using Diskpart utility I can do for other readers.

  There are different ways to do this for Win 2003 (easy in 2008, has expanded in the GUI). For Windows 2003 you could close the virtual machine, get the VMDK on another Windows Server, use Diskpart or another tool to extend partition here - since it is not the system partition / boot. Then mount it in the original virtual machine.

  Official VMware training, they recommend a free tool from Dell, called extpart.exe. Simple tool command-line which allows to extend the system partition / boot when the virtual machine is running. Check it out and try if you wish.

  It is on the FTP of Dells site at ftp.dell.com/app, any logon not required.

  Tool: http://ftp.dell.com/app/ExtPart.exe

• I get this error after the last update WindowsUpdate_80200053

  I have the 64 bit version of vist home.

  After the last patch of weeks

  "Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x 64

  "Download size: 25,7 to 82.7 MB.

  I get the error WindowsUpdate_80200053. Also now I can't download active x controls, updated maleware deleting files (Spy bot s & D gives check sum errors), any web site, including the Microsoft Update download (I get warnings of the author is unknown and corrupted file warning.)

  My wife has the 32-bit version and having the same problems.

  Hello Stdonitus,

  Please try the steps, in order to verify if there is no virus or Spyware issues below.

  1. run the Microsoft Windows malicious software removal tool

  2 download, install, update and run: (freeware) SUPERAntispyware and Malwarebytes' Anti-Malware (freeware).

  3. run this analysis online (safe mode with network, if possible):
  http://OneCare.live.com/site/en-us/Center/howsafe.htm

  4 see and follow carefully:
  "Looking for / help with software, spyware software malware and Hijackware.

  If you need help with virus-related issues, contact the Support Services Microsoft product.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  If you need more assistance for the position of virus/worm to the Microsoft Newsgroup - security - virus.
  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Security.virus
  Via the Web:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virus

  I hope this helps.

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• installation of Windows 7 fails to finish in the last stage

  Hello everyone...
  I tried to remove SQL server 2008, but my computer went to BLUE (dead page!)...

  I just used safe mode to save some of my data on the C drive...
  then try to reinstall windows (recovery and restore didn't help!)...
  now I have error in partitioning (saying this disc will die, and the window cannot be installed on this!)... I click Next and start installation process...
  in the last step of instillation (end of installation after reboot!)...
  It give me an error indicating that the window was not able to complete the installation. and then, off the computer...
  What can I do?
  (change the drive isn't an option, because it is healthy!)

  Hello

  1. do you get an error message when you try to partition the drive?

  If you try to format the drive, all data that drive will be lost, then all important data should be backed up (if possible) before trying to solve this problem.

  I hope that helps!

• Receive several codes error over the last seven days. This means - my computer is dead?

  Would like to inform if my computer is really damaged:

  The following errors are produced

  Error 2-32 in the last 7 days

  Error 11-190 in the last 7 days

  Error 14-1 in the last 7 days

  Error 55 7 during the last 7 days

  Error 102-19 over the last 7 days

  Error 1001-36 in the last 7 days

  This means - my computer is dead?

  Thank you

  Original title: Error Messages

  Hello

  They are very good methods for most Windows troubleshooting performance problems.

  Error: Windows Explorer has stopped working
  http://support.Microsoft.com/kb/2694911

  Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
  http://support.Microsoft.com/kb/2681286#method22

  Performance and Maintenance<- check="" these="" especially="" the="">
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

  Other methods of troubleshooting to use according to your needs:

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at Applications.
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp
  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set
  SEE drivers to hide Microsoft - update those with Dump in their names. (Also
  updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• IM have downloaded on windows 10 software adobe reader DC. Cannot install the update 15.009.20069 - gives error 1635. the drive is not all the functions associated with it - does not seem to download documents - opens in mocrosoft edge despiye moxilla fir

  I downloaded the CD player on windows 10. Unable to install the 15.009.20069 update. gives error 1635. Reader is not all functions available - documents opens on the edge of microsoft despite moxilla firefox as my default browser

  Hi Jacqueline,.

  Please check the steps in the article that Sukrit Dhingra shared with you. If in case the issue is not resolved with who perform a clean installation of drive using the cleaning tool and install offline using. Links provided below.

  Download Adobe Reader and Acrobat cleaning tool - Adobe Labs

  Adobe - Adobe Acrobat Reader DC Distribution

  To set the default on Windows 10 drive, try the steps from here: Reader/Acrobat is not the default PDF owner | Windows 10 threshold 2

  Thank you

  Abhishek

• Error on the last process in a package stops the loadplan

  I use 11.1.1.6.  I have 3 packages that run several interfaces and a support plan that runs each package as a step.

  Each step in the package has a branch of success and a branch of the failure that goes to the next step.  If any step fails, I still want to continue to the next step.  He appears in the last step in a package fails, workload is not running the next step in the plan of care.

  In all cases do continue?  Workload has "reboot of the new session" together for the restart field.

  A couple of options for you:

  (1) you can associate an exceptional step to step that fails in terms of load. Then in the exception of dynamic loading Plan Properties Management section, set the Exception with the Exception of running and ignore behavior. This means that even if Plan to charge geneates stage an exception still go on nest stage of execution.

  (2) in your packages still have a final step which will return a success criteria