We get an error "you must be authorized to perform this action" while trying to copy the data to the USB

Similar Questions

• I get "you must be authorized to perform this action."

  I get "You have authorized to perform this action" when trying to write to a disk of 1 TB FAT32 tied and shared correctly

  I have exactly the same problem with the blocker permission on all my computers. I also have complete owner/administrator (what you call full property rights) for my 2 PC and 1 laptop. All are able to connect to the internet and to use and extract the files on the external hard drive 1 t (which is plugged into the router as a network drive with a USB cable).

  But... When I try to write 'IN' the reader, who... is when the delay '' no permission box '.

  I tried different users, in correspondence of the names and passwords for the computer to go to the and with users in the admin with the reading and writing group but no luck.

  All support the linksys gives only examples XP. I am running windows 7 64 bit

  Woo Hoo! I found the solution to this problem on my own after MANY, MANY hours with support of Symantic(for Norton360), Cisco Linksys (to the router) and the Magic network (for the software that came with the Wireless Linksys router). Symantic wasn't able to uninstall norton and reinstall and said: there is nothing wrong with their software and that there nothing more they can do.

  Network Magic basically and says the same thing.

  And... Finally and most importantly, Cisco. Cisco Linksys basically does the same thing as others for the firmware, but they came then with the light concludes that it must be a defective unit and they will send me a new.

  Well... It was not good enough for me; all my equiptment (including the router) works great since the 1st configuration about a year ago.

  Well... Here is how I fixed it:

  Once the correctly mapped network drive, go to "computer", right-click on your network drive, click Properties, open the Security tab, click the edit button, and there you go. Now you should see the account which still tell it that person's permission. If it is there as it should be, click on this account to highlight, then the permissions wish you to have. Click on apply and ok. You should now be able to edit, add, delete, etc. your files now.

  My only problem with this is: Whence this account and why he did by default without changing the permissions, AND MORE important AGAIN (you will discover if you try to do) WHY can I NOT DELETE THIS ACCOUNT. When / if I find the answers to these last questions, I'll post it here. So, if you are iterested in this case, come back. I'm rain to get to the bottom of this.

  For now, I will let Cisco send me the new unit, because this new mysterious account can be a hacker who penetrated machines via the router somehow. If this is the case, my theory for how this can happen is: all linksys units come by default with easy access with a user/pass as admin/admin. I would strongly suggest that you go into your router on the tab configuration administrations; customize the password router AND on the storage tab; in the section "User management", click the "Edit" button and customize the admin password (make sure you write down your new password and what they goto)

• When you try to cut, copy, or delete on the external drive, get the error "Destination folder access denied. You must be authorized to perform this action. »

  When I try to create a folder, or cut, copy or delete anything on any external drive, the message "Destination folder access denied. You need permission to perform this action. "and by clicking on try again once he simply repeats. These drives work fine on any other system

  Appropriating the reader.

  How to take ownership and grant permissions in Windows Vista
  http://www.mydigitallife.info/how-to-take-ownership-and-grant-permissions-in-Windows-Vista/

  Instead of right clicking on folders, right click on the drive.

• Random messages "you must be authorized to perform this action."

  When you try to open or move files or folders, I randomly get a message access denied, telling me that I need permission to perform this action. Completely random, sometimes happens with new files that I just downloaded or of old files that I have didn't open for a few weeks. But not with all the files. I just got the same message just now moving a file on my desktop. I found a quick solution by opening the file or the folder properties and by adding my name of the computer on the Security tab and changing the permissions, but I have to repeat the process. How can I stop this happening so that I can just go back to re-use my files?

  When you have activated the built-in account of Adminnistrator was the persistent on your user accoount problem?

  Troubleshoot "access denied" when opening files or folders
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  You can try the system restore and restore to a date before you encountered the problem.

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Or you can try this:

  How to add appropriate to the context Menu in Vista
  http://www.Vistax64.com/tutorials/112795-context-menu-take-ownership.html

  Read the comments under the page if it suits you.

• Try to copy a file, "you must be authorized to perform this action."

  See screenshot linked below

  http://i49.Tinypic.com/2yv99pl.jpg
  Hi guys,.
  I encountered this problem for years and it finally pushed me to the point that I am determined to have it repaired.
  I am the owner of my PC, I am the only user on my PC, I experienced problems with accounts of users since startup of Windows 7
  What I'm trying to do is copy a file from my CD ROM drive on my HARD drive and I get the above error.
  Specifically "you need permission to everyone to make changes to this file"
  This happened once before and I have just admitted his defeat and left the spot, I now want to get it sorted once and for all.
  Help, please!

  You can use it on personal folders,

  http://www.Vistax64.com/tutorials/112795-context-menu-take-ownership.html

  Ownership of a file or a folder,

  Right click on the file/folder, select properties and then click the Security tab.

  Click Advanced, and then click the owner tab.

  Click on edit and then do one of the following:

  To change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.

  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  To change the owner of all subcontainers and objects in the tree view, select the Replace owner of subcontainers and objects of the box.

  See also why I can't delete a file or folder?

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  What to know before applying permissions to a file or folder

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

• File access denied: "you must be authorized to perform this action."

  When you try to repair Windows (using the Windows installation disc) starts the repair process set by mistake some files on my data partition, which is not the system drive: folder 'Boot' and the file 'bootmgr. "

  My system disk is c:\ drive and data drive is d:\

  When you try to delete these files, I have the above error, despite the fact that I have all rights to do.

  Any thoughts?

  Thank you

  JAS

  JA

  The startup folder should be placed somewhere other than the OS partition, while the repair has been made.  They are both necessary and moving them can cause problems.  If you continue to remove them, I'd do a backup first.  You could try to remove in safe mode, or try to remove with a 3rd party app called Treesize (by Jam software).  If these two you could take possession of their (google it).  Either the 'system' or the trusted installer currently has the files even though an admin you can not delete them.

• Error "You do not have sufficient rights to perform this operation" while trying to format the hard drive.

  Title: insufficient rights to the HD format

  I have Admin rights on my new laptop Dell E-6520, Win7 running.

  When I try to format my modular HD, I get the following message:

  "You don't have sufficient rights to perform this operation.

  Any suggestions would be greatly appreciated.

  THX,

  SB

  Hello

  I am happy to know that the problem is solved. Do not hesitate to contact us, in the case where you face other problems in the future.

• Web viewer error - you are not authorized to view this page

  Hello everyone

  I have a problem with my webviewer. The web viewer displays the following error "you are not authorized to view this page.

  Please follow this link to see the printscreen: http://imageshack.us/photo/my-images/708/v1d6.jpg/

  I checked the parameters of my account of the request:

  -Enable the web content viewer: checked

  -Hosting URL: ok

  -Redirect URL: ok

  So I checked my Folio publication settings

  -Publish Folio: NOW

  -STATUS: Public and free

  -Product ID: is correct.

  I also checked the box right edge binding.

  I checked the settings on the phone with the help of adobe and it seems that it is correct.

  I create my web page the file Sample.zip available in the Adobe documentation page-based web viewer (Embedding, content in your web page to web viewer)

  My account Id is correct (checked through the IPAD app)

  My wv Param is OK also

  I am sure of that because I can reach my folio via the direct URL "content.viewer.adobe.com/my way."

  The problem is that the folio do not appear in the webviewer in my index.html page. I don't have the error message in the Viewer, this error message is probably from an Adobe server.

  Please can you help me?

  Concerning

  The only time where this unauthorized error is when there is a problem with the URL of your accommodation. To ensure that your content can be hosted on a site not authorized by you, as the owner of the content, we check that the accommodation on your account URL is the URL that hosts the content. If you see this error and can reach your folio via the direct URL to contentviewer.adobe.com, this means that the URL of your accommodation is not configured correctly. Once you set the URL of your accommodation, your content will be visible on contentviewer.adobe.com; It will redirect to the URL of your accommodation. You said that you have checked the URL of your accommodation, but from your description, looks like it has not been properly defined on the specified account. If you still have difficulties, we can help if you provide your account information and folio.

  Thank you

  Christine

• Error "this file has no program associated with it for performing this action. An association in the SET ASSOCIATIONS of Crete Control Panel

  Original title: file Association.

  File association.  I am trying to create a delivery company in a direct line between doba.com, and ebay.  I get an error when I try to export.  The error "this file has no program associated with it for performing this action.  An association in the SET ASSOCIATIONS of Crete Control Panel.  I don't know how to do this.

  Great, I can help you right now.  Just open your C:\Users\Peggy\Downloads folder.  While you're looking at him, make a right click on the file icon and choose 'Open with', then "Choose program" you can get the Notepad in the list.

  Here is an example. This example is Windows 7, so it seems a little different, but the steps are the same:

  1. Right click on the file
  2. Go to "open with".
  3. Choose "Notepad."  If Notepad is not listed, use the option "choose by default" to find Notepad instead.

  This will open the file for you to view the data inside.

  

• I get the message: "this file has no program associated with it for performing this action. create an association in the control panel of binding together.

  Every time I try and open things on my computer, like internet explorer, windows player media, Aim, or my music etc. etc. files I get this message "this file has no program associated with it for performing this action. create an association in the control panel of binding together.

  I don't know what that means. He started to do so after we have some malicious and unwanted software on our computer. I thought it was because of the problems, but it didn't disappear after the computer has been fixed. Can I run programs as an administrator. But how do I get it back, just double click and the program opens as usual?

  Hi Justalilkink,

  See also the post made by SpiritX on January 24, 2010 17:32 in the link http://social.answers.microsoft.com/Forums/en/vistafiles/thread/086ab3bb-d764-4fb1-a6f3-205bff708e63

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Get open C: message file doesn't have a program associated with it for performing this action. create an association in the control panel for the default program.

  I can't open my c or d ' training or any other when I click it

  Hello

  ·        Remember to make changes to the system?

  This happens because autorun.vbs is created by a virus or Trojan horse. The virus normally loads the file autorun.inf in the root of the folder all the hard drive or USB key and then run the autorun.bat file which contains script to apply and merge autorun.reg into the registry, with possible change in the following registry key to ensure that the virus is loaded at system startup:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]

  USERINIT = Userinit.exe, autorun.exe

  Finally, autorun.bat will call wscript.exe to run autorun.vbs.

  When the antivirus software or security detected the file autorun.vbs as infected, the file will be deleted or deleted or quarantined.

  I suggest you follow the steps mentioned below and check if the problem is resolved.

   

  Method 1:

  I suggest running the fix which is present in the article below and check if the problem is resolved.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  If it does not help follow method 2

  Method 2:

  a. run the Task Manager (Ctrl-Alt-Del or right click on the taskbar)

  b. stop wscript.exe process if available by selecting the name of the process, and then click on end process.

  c. then terminate explorer.exe process.

  d. in the Task Manager, click on file-> new task (run?).

  e. type cmd in the box text open, and then click OK.

  f. type the following command one by one, and then press the Enter key:

  g. del c:\autorun.*/f/s/q/a

  h. del d:\autorun.*/f/s/q/a

  i. del e:\autorun.*/f/s/q/a

  Where c, d, e each representative the drive letters on Windows System. If there are several disks or partitions available, continue to command by changing on the other drive letter. Note that you must also clean files autorun from USB flash drive or an external portable hard drive as the hard drive may also be infected.

  If this does not help, follow the method 3.

  Method 3:

  a. click on start and click on run

  b. type regsvr32 /i shell32.dll

  c. Press ok

  d. you will see a message DllRegisterServer and DllInstall in the successful shell32.dll file

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1500 "another Installation is in progress you must complete installation before continuing this one ' when trying to down load a program always appears. Unable to complete the download

  Error 1500

  Hi Frank,.
  Welcome to Microsoft Windows Forums!

  I would like to gather more information about the issue.

  Ø summers - get you this error during the download or installation?

  Ø what application are you trying to download?

  In the meantime, you try these methods.

  Try to put your computer in clean boot mode and check if the problem persists. To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot.

  Steps to put your computer in a clean boot:

  1. click on Start
  2. type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  1. in the general tab, click Selective startup.
  2. under Selective startup, clear the Load Startup items check box.
  3. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  4. click on OK.
  5. When you are prompted, click restart.
  6. after the computer starts, check if the problem persists.

  NOTE: TURN ON YOUR COMPUTER TO A NORMAL STARTUP AFTER TRYING THE STEPS ABOVE.

  Click Start, in the search box to start, type msconfig and press ENTER.
  Select Normal startup, and then press apply and OK

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use
  http://support.Microsoft.com/kb/331796

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 0x8DDD0002 error code; I'm not logged as an administrator while trying to access the windows update Web site

  Real title: 0x8DDD0002 error Code

  Cannot access the update site.  Said that I am not logged as an administrator even if I am put as one on the log settings.  I know that my updates are not up-to-date and automatic updates is enabled.  How to solve this problem?

  Thank you

  Hello

  I suggest you to follow the steps from the link and check if it helps.
   
  Resolution: error number: 0x8DDD0002
  http://social.technet.Microsoft.com/forums/en/winservergen/thread/55ea3f8a-66c9-421A-bb4b-66fa0c7b349e
   
  In addition, check out the link and check if it help.
  http://support.Microsoft.com/kb/2497281
   
  Hope this information helps.

• I get the message 'c:\users\AppData\Local\Temp\7zS448\Setup does not find this file"while trying to install the printer driver

  Original title: \users\AppData\Local\Temp\7zS448\Setup

  I get the message, "cannot find this file" it displays the file in the tool bar, c:\users\AppData\Local\Temp\7zS448\Setup. This happens when I try to install the driver for my HP PhotosmartC3150 on my laptop HP Pavilion with Windows 7. When I click ok, the installation stops. Doesw anyone have suggestions?

  Thank you.

  Hello

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  Method 1:

  Unnecessary files on your hard drive, disk space and can slow down your computer. Disk Cleanup removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.

  Delete files using disk cleanup

  Try to install the driver now.

  Method 2:

  Step 1: Clean boot

  Put the clean boot computer and try to install the driver.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 3 in the article by putting your computer to normal startup.

  Step 2:

  You can download the drivers in the article below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1146516&prodTypeId=18972&prodSeriesId=1146511&swLang=8&TaskID=135&swEnvOID=4063

  Method 3:

  If you are unable to install the driver, I suggest you to run the Fixit provided prior to installation.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Hope this information helps. Please reply with the status so that we can help you.

• In Win 7 I get an error for various leave and- or "this action cannot be completed because the folder or the file is open in another program."

  I'm money than Win 7 Home Premium 64-bit SP1. The following information are linked to the steps to solve a persistent problem. Please read carefully and answer completely, since you asked users to report carefully on the long process of troubleshooting-advice you provided. I've been at it for six hours now in this round of troubleshooting.

  I tried to solve the continued permission errors and- or "this action cannot be completed because the folder or the file is open in another program."  This happens when attempts to cut-copy-paste------delete files (including the specific details listed below).  I searched on the Microsoft Support site to find answers to solve the problem, including the thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  In accordance with this notice of sons, I emptied my Temp folder. The problem persisted. I downloaded the app 'Take Ownership' and also tried with periodic and sporadic success. It seemed to lengthen the time between recurrences of the problem - that it would allow me a half a dozen of all cutting------copy-paste and------or remove actions, until the error messages stop me to exercise that or any other action.  Then, I used the task Mgr end explorer.exe and reopen it to see if that makes a difference. For a while it worked, where I could make a few cut sporadically------copy-paste and------or delete actions. Today I'm at the point where I can preform one action, then I have to open task Mgr, end explorer.exe and then restart it to perform again a more cut-copy-paste or delete action. So, I have to return to the task Mgr and repeat the process above, for each new action I want to perform.

  I watched rained down in the above quoted thread, and followed Support Engineer Samhrutha G troubleshooting tips - method 4 - start the computer start-up in minimal mode and to use the diagnostic selective startup. In previous discussions, you have asked for advice as to what you were doing when the problem occurs, so I rated as below:

  I went into msconfig, unchecked "Load Startup items", went to the tab Serivce and allowed only half of them. He was 12 of 24 listed entries. During the tests, programs that are only open on my desk were two windows explore and Notepad to save the results. I got the following results:

  I moved the contents of a folder on my main C drive on my external drive of 3 TB. When I then tried to remove this folder on my external hard drive I got the message

  "You must be authorized to perform this action."

  You need authorization S-1-5-21-602162358-602609370-839522115-1004 to make changes to this file.

  After I clicked retry the record has been deleted. When I went to delete another folder in the same location on my external hard drive, he deleted the first time. He was then three other orders normally external hard disk.

  Then I tried to delete a file in a different location on the external hard drive and the message

  "You need give permission to delete this folder.

  When I clicked on continue what he deleted

  I cut and pasted a file from my external hard drive to my C drive. The record stuck on drive C. He pasted the folder on drive C, but the original folder remained on the external hard drive, even though it was a cut and paste. So when I went to delete the original folder that should have been cut, this message came:

  "You need permission to delete this folder.

  When I clicked on continue he grew up:

  ", You need permission to perform this action."

  You need authorization MYCOMPUTERNAME\MYCOMPUTERNAME to make changes to this file.

  When I clicked Try Again he deleted. But why he would leave the original behind if it was a cut and paste?

  After that, I tried to cut and paste a file to a location on the external external hard drive to another location on the hard drive, after I had seen the contents of that folder and went up a level to the folder parent to try the cut and paste. I received the following message:

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  When I clicked Try Again it just repeat the error message, don't not allowing me to carry out the action and any other further reduction-copy paste and- or delete actions. I had not opened or closed all other folders, windows or applications, during the above test.

  Based on the Support Engineer Samhrutha G troubleshooting tips 4 method found on the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  (same thread as cited previously) Then I went into msconfig > Services and reduced the number of items in the selective startup of a unit, as I started 11 - instead of 12 - 24 listed entries. Upon reboot, I decided to re - check msconfig. In msconfig > Services he showed 165 points. All had a check in the box next to them. These 165 points, 56 showed as "ongoing" the rest showed as stopped. It would be useful that I specifically what were these 56 entries?

  I continued with the troubleshooting test based on these settings initiated by Support Engineer Samhrutha G tips to reduce the selective startup (remember... it was 11 selected items)

  I started by I try to copy / paste a file from my external hard drive to my C drive. He has successfully completed. When I went back to the location of the original file on the hard disk external and clicked on undo move, the message came:

  "You need give the administrator permission to move this folder.

  When I clicked on continue as he moved the folder

  Then I tried to cut a file on the C drive and stick it in my external hard drive. He successfully completed the task. I then went back to the original location of the file on the C drive and tried to "Undo Move". I received the following message:

  "You need give the administrator permission to move this folder.

  By clicking on continue he grew up

  "You must be authorized to perform this action."

  By clicking on try again, just to repeat the error message and could not undo the move

  I tried to cut the entire contents of a folder on my C drive and stick it in a directory on my external hard drive. He was able to make the cut and paste but left a folder and two files back in the original location on my C drive. When I then went to cut the 3 elements he missed and move them to the location I had initially indicated on my external hard drive - for the first file he brought up in the dialogue that he was already stuck and I would like to merge, etc, that I clicked on none. the second file in the sequence that he grew up:

  "You must be authorized to perform this action."

  When I clicked on continue he grew up

  "You must be authorized to perform this action."

  You need permission from the administrator of the computer to make changes to this file.

  When I clicked on Try Again, he said.

  "Cannot find this article.

  It is no longer in C:\Projects\FolderName. Check the location of the item, and then try again.

  When I clicked Try Again he repeats just this same error message until I had to click Cancel to exit.

  The record was then only showed only two remaining elements. Because the first cut and paste involved 22 files and 3 folders, now I am unable to say which of them got ignored or lost. When I updated the location of the original files he showed that a single folder on the left and the content was empty. When I checked it now duplicated and pasted to the location of this folder on the external drive, he was there with the appropriate content. So he had left this file to the original location, but it was empty. Why this erratic behavior?

  When I went, then, remove this folder remaining from the original location, he deleted successfully. If you understand the above message, you notice that a file has disappeared.

  I now need to mention an incident b4 I started the process of solving problems today. I felt that you needed some context b4 I mention this. I had tried to cut a folder that contains 33 files and 6 records. The six files contained two subfolders whose combined total content contained 28 photos - a mixture of mp4, JPEG and mp3 - for a total of 61 files in the parent folder, I tried to cut and paste. I tried to paste the folder parent on my external hard drive. He started at the cut and paste normally 7.04 GB and towards the end, I got the message

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  He was unable to finish when I clicked on Try Again, and I had to cancel out. However, he had removed all but one of the folders containing three files and it was not pasted into the new location. They were gone. I did a search on Win for some of the names of known files in this folder, and none appeared. Fortunately I had them on a second external drive. I plugged it to restore files, and of course that means more open task Mgr, ending explorer.exe and reopen in order to restore the files that explore had lost.

  After my results displayed above two rounds of by using a clean boot and selective startup, you can see that it is very difficult to actually diagnose the problem because it happens inconsistently. It is also very time consuming and very, very, very, very, very frustrating.

  I decided to try the method of disabling "just" thumb caching in the registry according to the advice of Robert P in the thread quotes. He said that I should go to Start > Run > gpedit.msc and "disable implementing caching thumbnails in hidden thumbs.db files" that was published of course in OK Win 7 > files, folders, and storage of the Microsoft Community forum. So I typed gpedit.msc in the search bar, and there was no instance of gpedit.msc, only setup.exe, I had to take was to gpedit.msc.  I installed it and after installation I typed again and he has not yet posted. So I rebooted. Restarted it showed up. When I went to run gpedit.msc, he brought to the top of the window with the error message group policy "MMC could not create the snap" when I looked up this article in the Microsoft Community, I found the link to the Win 7 forum, where the Star NIthyananda reported community
  "Gpedit.msc is not available in Windows 7 Home premium.  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/when-i-open-gpeditmsc-on-my-computer-which-is/b1576a0f-348a-49D8-be70-d83d0f36e8aa?tab=AllReplies#tabs

  He then mentioned

  "If you want to disable caching of thumbnails, you can access the registry editor and go to changing the location according to the value [note: its mine incorrect grammatical syntax and not]".

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache ".

  with no information on how actually access HKEY_CURRENT_USER

  I found the appropriate information on how to access the registry in Win 7 running regedit, with information on how to navigate to the appropriate location in the registry to disable the thumbnail cache

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache

  but there is no entry "DisableThumbnailCache.

  I researched and found that you can add it in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  I downloaded the Disable_Thumbnail_Cache.reg file. After running Disable_Thumbnail_Cache.reg to merge it into the registry, I then returned to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\

  and yet, there was no entry on DisableThumbnailCache

  The second method mentioned in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  has been to access via the Group Policy Editor

  I searched for the Group Policy Editor in Windows 7 search bar and it showed three entries

  A folder titled "for Windows 7 Group Policy Editor.

  a zip file named "add_gpedit_msc_by_jwils876_d3kh6vm.zip".

  Setup.exe

  The "Group policy for Windows 7 Editor" folder contained just the same two files listed below it

  So, I went ahead and ran the setup.exe and then restarted. After the reboot, I did a new search for the Group Policy Editor and he grew up just three results.

  I went back on the WindowsSeven Forum and found advice in the thread

  http://www.SevenForums.com/tutorials/3652-local-Group-Policy-Editor-open.html

  Title: how to open the local Group Policy Editor in Windows 7

  The tips were:

  To search for a group policy or the registry key, value, etc., see:

  Political research group

  The link above leads to:

  "The GPS is going to move to a new end area January!

  http://gpsearch.azurewebsites.NET
  You will be redirected in 15 seconds! »

  I waited about 3 minutes and it went nowhere, so I clicked on the http link and he grew up:

  GetCategoryDependencies() - 500ServerError

  This is where I could and I am now. And I can't "simply" disable caching of thumbnails. Can I return to my workspace and all simply continue with the editing work that I do, which is to cut, or -copy-paste and or delete files that I advance in my workflow. I can't do it without opening task and then Bishop ending and re-open explorer.exe for each order, I want to achieve.

  At this point now a few hours later including writing this message, I think that a new facility would be easier, more rapid and less headaches but that will solve the problem?

  Sense my frustration?  If this is not the case, let me make it clear. It's extremely frustrating. Why Windows doesn't have a fix for this is an error permanently?

  It was mentioned in the original thread that I cited that it would be better to start a new thread and continue to add my comment to the answers already posted 138. This problem has plagued me for months. Please notify

  As you have tried many fixes and changes to the registry, I suspect that your only option is a clean installation

  And having done so don't try not to cut/copy anything other than the data in the files in libraries in any other player. Copy of records of the victory Road will result in the registry locations becoming screwed.

  And if you really need locate the lbraries on another drive will redirect the location of other libraries that animate