Try to copy a file, "you must be authorized to perform this action."

Similar Questions

• I get "you must be authorized to perform this action."

  I get "You have authorized to perform this action" when trying to write to a disk of 1 TB FAT32 tied and shared correctly

  I have exactly the same problem with the blocker permission on all my computers. I also have complete owner/administrator (what you call full property rights) for my 2 PC and 1 laptop. All are able to connect to the internet and to use and extract the files on the external hard drive 1 t (which is plugged into the router as a network drive with a USB cable).

  But... When I try to write 'IN' the reader, who... is when the delay '' no permission box '.

  I tried different users, in correspondence of the names and passwords for the computer to go to the and with users in the admin with the reading and writing group but no luck.

  All support the linksys gives only examples XP. I am running windows 7 64 bit

  Woo Hoo! I found the solution to this problem on my own after MANY, MANY hours with support of Symantic(for Norton360), Cisco Linksys (to the router) and the Magic network (for the software that came with the Wireless Linksys router). Symantic wasn't able to uninstall norton and reinstall and said: there is nothing wrong with their software and that there nothing more they can do.

  Network Magic basically and says the same thing.

  And... Finally and most importantly, Cisco. Cisco Linksys basically does the same thing as others for the firmware, but they came then with the light concludes that it must be a defective unit and they will send me a new.

  Well... It was not good enough for me; all my equiptment (including the router) works great since the 1st configuration about a year ago.

  Well... Here is how I fixed it:

  Once the correctly mapped network drive, go to "computer", right-click on your network drive, click Properties, open the Security tab, click the edit button, and there you go. Now you should see the account which still tell it that person's permission. If it is there as it should be, click on this account to highlight, then the permissions wish you to have. Click on apply and ok. You should now be able to edit, add, delete, etc. your files now.

  My only problem with this is: Whence this account and why he did by default without changing the permissions, AND MORE important AGAIN (you will discover if you try to do) WHY can I NOT DELETE THIS ACCOUNT. When / if I find the answers to these last questions, I'll post it here. So, if you are iterested in this case, come back. I'm rain to get to the bottom of this.

  For now, I will let Cisco send me the new unit, because this new mysterious account can be a hacker who penetrated machines via the router somehow. If this is the case, my theory for how this can happen is: all linksys units come by default with easy access with a user/pass as admin/admin. I would strongly suggest that you go into your router on the tab configuration administrations; customize the password router AND on the storage tab; in the section "User management", click the "Edit" button and customize the admin password (make sure you write down your new password and what they goto)

• When you try to cut, copy, or delete on the external drive, get the error "Destination folder access denied. You must be authorized to perform this action. »

  When I try to create a folder, or cut, copy or delete anything on any external drive, the message "Destination folder access denied. You need permission to perform this action. "and by clicking on try again once he simply repeats. These drives work fine on any other system

  Appropriating the reader.

  How to take ownership and grant permissions in Windows Vista
  http://www.mydigitallife.info/how-to-take-ownership-and-grant-permissions-in-Windows-Vista/

  Instead of right clicking on folders, right click on the drive.

• Random messages "you must be authorized to perform this action."

  When you try to open or move files or folders, I randomly get a message access denied, telling me that I need permission to perform this action. Completely random, sometimes happens with new files that I just downloaded or of old files that I have didn't open for a few weeks. But not with all the files. I just got the same message just now moving a file on my desktop. I found a quick solution by opening the file or the folder properties and by adding my name of the computer on the Security tab and changing the permissions, but I have to repeat the process. How can I stop this happening so that I can just go back to re-use my files?

  When you have activated the built-in account of Adminnistrator was the persistent on your user accoount problem?

  Troubleshoot "access denied" when opening files or folders
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  You can try the system restore and restore to a date before you encountered the problem.

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Or you can try this:

  How to add appropriate to the context Menu in Vista
  http://www.Vistax64.com/tutorials/112795-context-menu-take-ownership.html

  Read the comments under the page if it suits you.

• File access denied: "you must be authorized to perform this action."

  When you try to repair Windows (using the Windows installation disc) starts the repair process set by mistake some files on my data partition, which is not the system drive: folder 'Boot' and the file 'bootmgr. "

  My system disk is c:\ drive and data drive is d:\

  When you try to delete these files, I have the above error, despite the fact that I have all rights to do.

  Any thoughts?

  Thank you

  JAS

  JA

  The startup folder should be placed somewhere other than the OS partition, while the repair has been made.  They are both necessary and moving them can cause problems.  If you continue to remove them, I'd do a backup first.  You could try to remove in safe mode, or try to remove with a 3rd party app called Treesize (by Jam software).  If these two you could take possession of their (google it).  Either the 'system' or the trusted installer currently has the files even though an admin you can not delete them.

• We get an error "you must be authorized to perform this action" while trying to copy the data to the USB

  * Original title: data is not copied to the USB

  I'm trying to copy some materials in pen drive then a message appears and data are not copied the message is allowed to perform this actionand need you

  Data is copied from the pd to the system. How can we solve this problem? Please help me.

  Of aranjo

  Hi aranjo,

  I will definitely help you with this.

  I suggest you to refer to suggestions provided by Nirmal S on 24 November 2012 and check.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/how-do-i-grant-permissions-to-a-pen-drive/d64efbe4-5a6b-414d-98BE-3f0835668bcf

  If the problem persists or you have any other questions, do not hesitate to let us know. It is our pleasure to be of service.

  Thank you.

• You need permission to perform this action. You need PCNAME PC\USERNAME permission to make changes to this file

  problem change a file, it says

  1. "You must be authorized to perform this action. You need PCNAME PC\USERNAME permission to make changes to this file.

  I am the administrator, but I still do not have access.

  You may need to take possession of your file - see here:
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/

• Windows Explorer crashes when you try to copy a file

  Win xp Pro

  When you try to copy a file using windows Explorer, the application crashes. I tried to use select times of right mouse and select menu with the same results.

  All solutions short of re - install XP

  Win xp Pro

  When you try to copy a file using windows Explorer, the application crashes. I tried to use select times of right mouse and select menu with the same results.

  All solutions short of re - install XP

  This happens with any file or a particular file?

  Have you tried the copy command from a command prompt window (start > run > cmd > OK)?

  For the full syntax of the copy command, see http://technet.microsoft.com/en-us/library/bb490886.aspx

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud

• Robocopy hangs when you try to copy a file which in use

  Hello

  I find that Robocopy hangs when you try to copy the file using, for example an Outlook .pst file. The behavior of Vista was not to copy the file according to the retry and wait switches from command line, which allowed the backup race move to the next file and finally finish. With Windows 7 the Robocopy session is suspended and resumes ever, even if the file she is trying to copy is closed.

  Is this behavior under Robocopy in Windows 7? Is it possible to get Robocopy to move to the file according to when he's trying to copy a file that is in use?

  Thank you

  Jason.

  "There is no need of me a pause in my script"-Yes, I understand [and should have done before].

  I just tested a network for the first time operation.  It hangs forever as your done even after I closed Outlook & waited for the w: 30 I put.  {I also ran with closed Outlook the first time just to make sure that the network itself had no problems}

  I read that you have provided the link.  This suggests that there is no solution.

  - - - - - - -

  You seem to be doing a lot more & probably more structured than mine operation, this workaround might not be of any use to you.  The other open files issue concerns a simple hourly backup of my kernel files that includes pst files.

  1 I xcopy all the files in a folder internal InterimBackup first.  Can I use XCopy or RoboCopy to send InterimBackup to the real destination.

  2 If Outlook is open then it will copy on InterimBackup and, if the previous Outlook.pst is still in InterimBackup she gets deleted by the attempt of xcopy.  [conclusion - XCopy verifies the existence of the replacement of a file, deletes it and only then discovered that the source file is locked and cannot be copied.]

  So I precede this with

  0 I run [if exists] copy D:\InterimBackup\Outlook.pst to D:\InterimBackup\Outlook2.pst

  The result is that whole process always ends but it only includes the last Outlook.pst that was available.  So I always make a point of Outlook to quit at some point during the day so that he could take part in this backup.

  If you have also tried this as a two part operation, your xcopy / robocopy in the folder InterimBackup would always succeed but would include only Outlook.pst if you had first closed the application.  Subsequent operation of RoboCopy would always succeed with the same possible omission.

  The downside of this might not suit your overall goal.  You'd have to RoboCopy separately all your others folder trees but keep the Outlook.pst in a tree that has not been included.  You could do this either by restructuring of your data or using RoboCopy exclude switches for the file Outlook.pst file.

  You have to accept that you might not be sure about the last time that the Outlook file had been included unless you had deliberately run the RoboCopy closing.

  I have reviewed this improvement by using Task Scheduler to respond in the event of closing Outlook and use it to initiate the copy outlook.pst to InterimBackup, then by running the part of the main operation on RoboCopy to this folder.  But my needs are so simple that I've never felt it's the logs of the events that I would have to put in place.

  As I say, it may not meet your needs.

• When I try to copy a file it displays an error message

  The message error "unable to copy the parameter is incorrect."
  The file is a crack of a game file.
  Why is this? and how do I solve this problem?

  Hello

  1. is the question that is specific to a particular file?

  2. is the file on a disk (CD/DVD) or on the hard drive?

  3 did you changes to the computer, before the show?

  Method 1:

  Right-click on the file and select Rename. Now search for the question.

  Method 2:

  Try to copy the file using the command prompt and check.

  a. Click Start, click principally made programs, click Accessories, right-click on command prompt and select run as administrator.

  b. type in the following command, and press ENTER.

  Copy

  http://TechNet.Microsoft.com/en-us/library/bb490886.aspx

• Windows has encountered a problem, try to copy a file... why?

  Windows has encountered a problem, try to copy a file... why?  MikeW

  There are many possible reasons.  What you have tried to do over time?  Is there additional information printed with this message?  A few possible reasons come to mind:

  • The file was opened exclusively by the operating system or another program
  • The full path to the file from the C:\... contain more than 256 characters
  • Permissions problem: you have read permissions for the file or permission in writing to the destination
  • The file entry or damaged directory disk sector. (Run the command chkdsk with the /R option to this address)
  • The file is larger than 4 GB and you try to copy it to a disk formatted with a FAT file system.

  I'm sure that there are more reasons, but need more information.

  HTH,
  JW

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• Micro adapter USB keeps disconnecting when I try to copy the files.

  1 messages
   
   
  Micro adapter USB keeps disconnecting when I try to copy the files.

  Hello

  I have a Micro SD card reader, when I insert my memory card into the reader, he comes and stays there until I try to transfer files to the memory card, or if I run a h2testw test it disconnects.

  Its getting boring, I bought another card reader, but the same problem persists. I tried the drive in my computer and it seems to have worked here, but just on my laptop, I'm having problems.

  Any help will be appreciated, thanks in advance!

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  Method 1:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Method 2:

  I suggest you to remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click Run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the Hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

• •To play .mp2v and .dvr-ms files, you must have a DVD decoder hardware or software installed on your computer.

  To play .mp2v and .dvr-ms files, you must have a DVD decoder hardware or software installed on your computer.

  You need a DVD decoder.  Maybe VLC media player will work.  If this isn't the case, you will need to buy a program to read these files (or DVD) on your computer.