We intend to upgrade little welcome vpshere 5.5, I have question about the license

Similar Questions

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• General questions about the upgrade

  Hello

  I have aquestion about the upgrade,

  When I did an upgrade from windows 7 home ultimate version or another for example windows 8.

  1. no data not wil drop in time upgrade or I do a backup copy be sure.

  2 wil that any software that is installed before the upgrade for example antivirus, office 2010 wil be on the computer after the upgrade? or what I need to install again!

  3 when I do an upgrade must I pay online for the new version?

  answers very short wil suffice.

  Thank you

  Johan

  1. your files should be kept in an upgrade, but we always recommend making a backup to be sure.

  2. your software will be kept, but as with #1 above, we recommend to always have your install CD/file available to be safe in case you need it.

  3. you can buy the edition of Windows 8 Upgrade from a store or online, Yes. It is not free.

• Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
  Thank you very much!

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?

   

  Yes, the registration period is between June 2, 2012 to January 31, 2013.

  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?

   

  Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.

  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.

   

  Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.

   

   

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  Then follow the instructions that will be provided on-screen to cool your PC.

  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
   
  As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
  Thank you very much!

• Questions about the upgrade from 4.1 to 5.1

  I posted the following to the thread in the forum of Vsphere upgrade, and in five days I got ZERO responses. Perhaps more here and even here is the wrong place to post things, or maybe I'm not questions easily answer. I'll post it here too, since it mainly Virtual Center, I think. Maybe someone can help me or tell me what is the problem with my announcement that allows to go unanswered. Here we go:

  I'm about to upgrade my little (1 4 host ESX and Virtual Center) environment vSphere 4.1 and 5.1.  My database to the virtual Center lives on a separate SQL server 2008R2 server. My virtual Center Server is virtual, if that matters. I have upgraded my licenses and read the documentation, to try to formulate a plan that escapes enough causing any downtime for my virtual machines.

  I am designing a series of steps that are all pretty low, and such that each step does not harm anything, whereas if I have problems, I can take my time to solve. Then, when this step is stable, I can continue to the next step. I want to tell you what I have in mind, ask a question here and there and hope you can report errors that I make and answer my questions. The big picture is:

  1 Virtual Center update and give him a few days to show me any problem before doing anything else.

  2. upgrade to a host ESX 4.1 5.1 ESXi. Convince me things are okay, before you do more.

  3. put to level the other three 4.1 ESX hosts. Make sure that everything is fine.

  4 create new LUNS, formatted with the new VMFS, move my VM to them and remove the old one.

  If there is nothing wrong with this basic plan, please let me know.

  More details and questions:

  Question: The docs say my Virtual Center Server, under the SSO, the inventory service and the virtual Center Server, will need TEN GIGABYTES of RAM.  Is this true? It seems insane to me.

  Question: Can I install on my Virtual Server 4.1 single signon Center without DANGER?  In other words, its installation will prevent Server 4.1 virtual work center? I hope I can, because it is a new feature that I have trouble with. I don't want to get into a situation where my old virtual server Center does not work, and I can't get the new work.

  Question: The VI 4.1 client can talk to Virtual Center 5.1? The VI Client 5.1 can talk to Virtual Center 4.1? I hope that the answer to one of the people is 'yes '.

  Step 1: Create a backup of my virtual Center VM (with vRanger connection, if this is important) and a backup of my SQL database.

  Step 2: Install single Signon. Here is where I hope that this does not stop 4.1 virtual work center.

  Step 3: Upgrade the inventory Service and Virtual Center to 5.1

  Step 4: Install VI Client 5.1 on the VM virtual Center and on my desk from which I usually manage my environment.

  Step 5: Wait I'm comfortable that everything is fine. It is perhaps a day or two (or more).

  Question: How can I spend my hosts for maximum security? I'd rather put a DVD in the drive and do it from the console, unless this is not a good way.

  Question: Before I update a host, should I remove the fiber channel cables, so he can't see my VMFS LUNS? I think I read that somewhere, and it sounds like a good thing to do, even if I do not have.

  Step 6: Upgrade a host ESX 4.1 5.1 ESXi. Move a couple of virtual machines essential to it and he give a day or two to settle.

  Step 7: Upgrade the other three ESX host.

  Step 8: Wait until I'm really, really comfortable with things.

  Step 9: Create a new LUN VMFS5, migrate my VMs to them over time and remove the old one.

  I would greatly appreciate all advice and attention that you may have.

  Question: The docs say my Virtual Center Server, under the SSO, the inventory service and the virtual Center Server, will need TEN GIGABYTES of RAM.  Is this true? It seems insane to me.

  If your environment is small you can run all these in one and ofcouse if you execute all these in a server you need more RAM... There is no limit.

  Question: Can I install on my Virtual Server 4.1 single signon Center without DANGER?  In other words, its installation will prevent Server 4.1 virtual work center? I hope I can, because it is a new feature that I have trouble with. I don't want to get into a situation where my old virtual server Center does not work, and I can't get the new work.

  normally if you think only in terms of scalability, it is good to have separate these things... He is sure no questions evey thing won't work if you install it on the same server also.

  Question: The VI 4.1 client can talk to Virtual Center 5.1? The VI Client 5.1 can talk to Virtual Center 4.1? I hope that the answer to one of the people is 'yes '.

  The VI 4.1 client can talk to Virtual Center 5.1? No, but talk about Client 5.1 Virtual Center 4.1

  Step 1: Create a backup of my virtual Center VM (with vRanger connection, if this is important) and a backup of my SQL database.

  Step 2: Install single Signon. Here is where I hope that this does not stop 4.1 virtual work center.

  Step 3: Upgrade the inventory Service and Virtual Center to 5.1

  Step 4: Install VI Client 5.1 on the VM virtual Center and on my desk from which I usually manage my environment.

  Step 5: Wait I'm comfortable that everything is fine. It is perhaps a day or two (or more).

  these steps are ok

  Question: How can I spend my hosts for maximum security? I'd rather put a DVD in the drive and do it from the console, unless this is not a good way.

  BLI, or DRAC suites method what ever you... very well.

  Question: Before I update a host, should I remove the fiber channel cables, so he can't see my VMFS LUNS? I think I read that somewhere, and it sounds like a good thing to do, even if I do not have.

  Installing esxi will not hurt of thing... to the old VMFS... It will ask to keep or to format the old vMFS... BUT I prefer to remove the cables... BECAUSE we are humans...

  Step 6: Upgrade a host ESX 4.1 5.1 ESXi. Move a couple of virtual machines essential to it and he give a day or two to settle.

  no need... . If the hardware is on the HCL, I mean the firmware/driver etc... for the esx is on the HCL, then no problem...

  Step 7: Upgrade the other three ESX host.

  Step 8: Wait until I'm really, really comfortable with things.

  Step 9: Create a new LUN VMFS5, migrate my VMs to them over time and remove the old one.

  assign the new LUN and create VMFS and migrate... It'S her!

• information about the license for R12 upgrade

  Gurus:

  We intend to go to RHEL 5 RHEL 6.

  Also an upgrade to 11.5.10.2 R12

  Whereas also the transition from 32 to 64 bits for the applications node.

  If anyone knows if there is a metric document out there for us to check what type of licenses, we would need?

  Apologies for any errors in the spelling of the licence-

  Thank you and best regards,

  For questions of license or queries, please contact your Oracle representative as it is the best to answer these questions.

  Thank you

  Hussein

• When is MS stop support Vista service pact 2 and a few questions about the upgrade to the new version

  Hello comrades,.

  I have a few questions and concerns, and hope that you guys can share with me some lights here.

  1. What is MS stop supports the Covenant of service about the update of windows Vista 2 / other online support?

  2. my computer is vista based 32 bit, ultimate version. I heard that there are a lot of wonderful things about Windows 8. Should I move to Windows 8, or should I actually wait awhile then buy a new computer with Windows 8 64 bit attached?

  Honestly, it's a question that has been bothering me for some time. But my laptop is 4 GB of RAM, 1920 x 1080 HD display, 300 GB HARD drive at 5400 RPM (cost me a lot - it's a SONY) and have been works very well even with vista, the operating system highly complainted by many others. I think it would be a waste to buy a new computer, including the so-called net-books and i - PAD, I know, they are beautiful and sexy, but looking at their record, I was speechless. Yet knowing 32bits was maximum and MS has already announced that they stopped support for Vista SP1, consider that SP2 is expected online.

  3. how long do you 32-bit based can last? Should I increase the RAM of 4 GB to 6 GB and upgrade to Windows 8?

  4. How about 64-bit based of the future? Or is it true that most of the computer manufacturing starts in the future these application device of the base (not the real computer-driven software)?

  5. or should I forget it all, wait 3-4 years, until my laptop would be a museum piece, then buy a desktop computer which monitor and hard drive is all separated, knowing it is the best technique for the $s and phone for mobile computing laptop use there?

  I understand that this is somewhat a personal decision, but I really appreciate you guys Preview on the path of the operating system! Thank you

  Yes it will work to buy a copy upgrade of Windows 8.   This is a custom installation rather than an upgrade in place once you switch between 32-bit and 64-bit.  However you can still save money by buying the upgrade license.

  More important is that all the drivers you need will be available.  Your computer manufacturer will not write drivers for Windows 8 because the computer has been out of production far too long.

  Windows 8 is a significant departure from previous versions and I suggest that you upgrade to Windows 7 If you are tired of Vista or wait until you buy a new computer before Windows 8.  You read the discussions on the forums of Windows 8 CP.  At this point, there are many critics of Windows 8 due to the removal of the Start button and Start Menu.  Many people dislike having to rely on style Metro Screen start for many things.  It is becoming a major concern.

  To navigate to the Windows 8 CP forums use in the middle of the dropdown at the top of this forum page.

  Note:  Microsoft has not announced that there will be copies upgrade for Windows 8.  Microsoft has already stopped providing copies of upgrade of Office is not yet clear what will be available for 8.

• Questions about the upgrade to the 4.0 unit

  Hi all

  I have a few questions before the server upgrade to 4.0 to 3.1.3 and install a new Server 4.0. We currently have 7 servers unit all current 3.1.3 running with digital networks. We are planning to upgrade a Server 4.0 and install a new server with 4.0 costs. This is the beginning of the upgrade of the entire company and my questions are the following:

  1 will update the AD schema during the installation/upgrade to 4.0 problems with the 3.1.3 other servers?

  2 since there isn't that one account of the unit currently with the 3.1.3 configuration, creating 4 new accounts unit cause any problem or should I / can I use the current to the unityadmin the unit account or one of the other 3 new accounts? I would like to start over again with 4 new accounts and not use the current service account and migrate to new accounts during the upgrade other servers.

  3. is there a problem to have 3.1.3 servers running jointly with 4.0 servers in general?

  My impression is that this is very well that I would no problem to start the 3.1.3 servers alongside with 4.0 servers, there should be no problem to use new accounts of the unit and this update of the AD schema should not be a problem for the old servers, but I want to make sure before doing the update/install.

  Oh, it's all run with Exchange 2000.

  Thanks for your time!

  Keith

  (1) it is backward compatible

  (2) creation of 4 new accounts will be fine.

  (3) you can run 3.1 (x) alongside with 4.x

  H. M.

• Question about the upgrade of Windows 8 to 8.1

  Hello, I have a laptop Asus G46VW supplied with Windows 8 is installed, he showed some software problems related lately I decided to format it, one of my problems was that I couldn't go to 8.1 of the store, so I think to initiate an ISO 8.1 in a flash and fresh installation 8.1 formatted hard disk drive , my question is: If the Activation Code for 8/8.1 is in the BIOS if I start a new 8.1 installation on my laptop it will read it and activate 8.1 correctly or I have to format the laptop on 8 and upgrade them to 8.1 via the shop, because it would be pretty boring.

  Hello

  Before you do anything, remember to create any media which is available from the manufacturer of the computer...

  Just in case.

  You shouldn't need to format anything... If you use recovery options of the manufacturer or discs, which will take care of everything... It will overwrite all the old stuff...

  You have to do a lot of updates before moving on to Win 8.1...

  Just KB2871389, or even KB2917499... All others will be included in the update...

• I have a question about the ESXi upgrade using Update Manager...

  This is probably a stupid question, but I've never played and update ESXi using Update Manager.  We need to update ESXi ESXi 4.1 4.1 servers before vCenter 5.0 U1 from U2 (there is a known issue where the ESXi 4.1 servers receive the GROUP after upgrading vCenter to 5.0 U1).  We used HP ESXi image to install ESXi on our servers for new installations.  This image contains ESXi.1 U2 as well as the drivers of HP and CIM.

  4.1_U2_Oct_2011_ESXi_HD - USB-SDImgeInstlr_Z7550 - 00241.iso

  Can this same image HP ESXi 4.1 U2 that we used to install to new ESXi servers, be used to upgrade our 4.1 4.1 U2 ESXi servers using the Update Manager?  Or, upgrade package should be used for the upgrade?  Also, if an upgrade package must be used, is it OK to use one provided by VMware, or will be losing our HP specific drivers and CIM to do this?

  Thank you

  Hello

  You can import custom HP ESXi 4.1 U2 ISO in Update Manager (don't forget to use the latest version of June 2012, available here: https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVM06) and update the hosts with her.

  In a second step, you can then import the last custom HP ESXi ISO 5.0 (available here: https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVM09) and update the hosts again with her.

  To be on the current ESXi 5.0 patch level you finally apply the latest patches from VMware via the Update Manager.

  -Andreas

• Question about the CS5 upgrade paths

  I bought a copy of Creative Suite 2 education for Windows some time ago, but never recorded the CD key in my Adobe account. The program, as far as I know, is never disabled correctly (computer - FRY mounted sudden power aren't fun) and I've never bothered trying to reactivate the program again.

  Well, turns out that I will buy Creative Suite 5 soon, and I was wondering if I can use my old license education upgrade to Creative Suite 5 at retail. I watched the tool of upgrade eligibility on this site, and while he said CS2 qualified for an upgrade, it did not mention if the education licenses have been accepted.

  I think that I also have an educational copy of Photoshop CS2 that I never used since I was the Creative Suite 2 at the same time. Could I use for detail of the Creative Suite 5 upgrade too?

  Thanks for your help!

  Yes you can use it. The upgrade of the suite is much cheaper than the upsell of the individual product. Education versions with full rights to level of detail. You will need the serial number for verification during the installation of CS5. Your timing is pretty good, too.

  CS2 is the oldest version that you can upgrade. In case you're interested, Amazon has a great deal on the CS2 to CS5 Design Premium Upgrade: http://amzn.to/eJQziD

  Bob

• Questions about the OEM upgrade repository 10.1.0.4 to 10.2.0.1 db in

  Hi all
  
  Since we installed the 10g grid control in Windows 2003 server who and the agent have been upgraded to 10.2.0.5 see below:
  
  D:\Oracle\Ora10g_GC\agent10g\BIN > emctl agent status
  Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
  Copyright (c) 1996, Oracle Corporation, 2009. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 10.2.0.5.0
  Version of the WHO: 10.2.0.5.0
  Protocol version: 10.2.0.5.0
  Agent home: D:\Oracle\Ora10g_GC\agent10g
  File binary agent: D:\Oracle\Ora10g_GC\agent10g
  Agent process ID: 2460
  ---------------------------------------------------------------
  Agent runs but not ready
  
  The repository db (on the same server) stayed in 10.1.0.4 so we tried to upgrade this db. This is the step we did:
  
  (1) installed oracle 10.2.0.1 in a new oracle home.
  (2) listener configured in this new database using the port 1522
  (3) Ran pre upgrade util: utlu102i.sql
  (4) Ran oracle dbua new home
  
  Looks like that the upgrade is executed successfully with the exception of the configurations of EM.
  
  Name of the step name log file
  PreUpgrade.log pre successful upgrade
  Oracle Server Oracle_Server.log successful
  Oracle_Server.log Oracle Workspace Manager successful
  Post PostUpgrade.log successful upgrade
  EmConfigUpgrade.log Enterprise Manager Configuration Failed *.
  Generate the successful generateSummary.log summary
  
  My questions are:
  
  (1) what does this failure?
  (2) how can I fix this?
  
  Thank you very much for your help in advance,
  
  Shirley

  EM is not configured for this database

  Which points to the control of stand-alone database (dbconsole). I'm not so familiar with DBUA, it could be THAT DBUA try to configure default dbconsole. But you have not need of a database repository gridcontrol, still more, such a data base should not have a repository dbconsole. So you can ignore the error message.

  He is the agent who speaks with the WHO and the repository database, so you should follow the instructions in the present note metalink inform the agent about the changes:

  How to: change the listening Port of the database that contains the repository of grid control
  DOC - ID: 369997.1

  Werner

• Questions about the Satellite L100 (PSLA3L) ram upgrade

  I have the laptop above and a new stick of RAM, do not have a manual but are there instructions for the upgrade, that?

  I opened the back and the type of image that keeps the RAM is not familiar to me. I can see how it goes, but it's not clips easily which leads me to belive miss me something, or else it requires an ungodly amount of strength.

  Grateful for any help

  Hello

  Don t be not shy, just try it. You must use force. A little tip: when you put the lever in the slot, then bend the clips a LITTLE outside the module can easily break into the slot.

  Trust me, try it as I suggested you and it will work.

  Welcome them

• Question about the upgrade memory for my Satellite M40-307

  Sorry for the newbie question. But if I have 512 MB of memory for the time being, what are my upgrade options?

  Do I have to buy pairs of memory? So I can or buy 2 x 1 GB = 2 GB, or 2 x 512 MB = 1 GB + 512 existing. Or can I say just buy a single 512 MB or 1 GB chip?

  Since no one wants to answer:
  1. check if your laptop supports Dual Channel Ram (it should be, but just see the manual to be sure)
  2. knowledge of what type of RAM you have. This will add or remove a possibility of upgrade

  The thing with Dual Channel is, that you have the best performance if you use 2 RAM of the same type (really of the same type: company, size...)
  you could:
  3. Add a 512 MB of RAM of the same type you have
  3 b. buy 2 pieces of new RAM of the same type (1 GB + 1 GB, or 2 + 2 GB) and do not forget that your laptop supports this quantity (once again: manual to check)

  You will also find in the manual, if your computer supports DDR or same DDR2 RAM (faster)

  If you have lost your manual, you can download it here on the toshiba Web page

  I hope I could help a little.

• Questions about the upgrade memory for gateway P55C-200

  It comes from an old computer from 1997. I'm trying to update and upgrade for the treatment of text and with older games who have worked on it, even if a bit slower that I liked. MDK is a favorite. I add that a little more RAM will help. It has windows 95 on it. He is currently in good working condition. I have a perfectly good printer and a scanner that I can't use it on my other computers with operating systems newer, but which works well on this one. The computer has a card? IRE 32meg with a spare slot, CPU Pentium 200 HZ and a 4G IDE hard drive.

  What type of card m? IRE this computer accepts it and how can I add? The existing memory card has no info about it. I visited the manufacturing sites of memory several, and they come in white for this computer only. I think maybe it's SDRAM PC66, but I don't know. Any information would be appreciated.

  I just ordered two 128 meg sticks, clock 4, CL3, PC66. Who will be my max at the limit of my system to 256 meg. I still don't know whether or not the card memory factory was PC66, as there was no label on it, and my manual is non-specific, because it covers a group of computers that use the same series of motherboard. The seller did some research and said the Board recommended will work for me. He gave me a link http://panam.gateway.com/s/motherbd/intel/m00260/m0026023.shtml that my Board is covered by the listed series. I guess in a week or so I'll know. Thank you all for your help.