We need heat sinks to be installed en XW8600 with two QC XEON E5450 CPU

Hello

I plan to buy a HP XW8600 refurbushied and it does not appear that it has installed radiators.  I wonder if it's a really must have heatsinks installed for this system with two QC XEON E5450 CPU.  I will use this system to host multiple Virtual Machines using VMWare or OracleVM.  It has 32 GB of RAM.

Appreciate your response and pointers.

Concerning

Chandra

Chandra,

It is strange that someone would sell the workstation xw8600 without heat sinks.  You really need a heatsink / fan on each processor.  These processors run 80 watts maximum TDP each and so you do not need to worry to buy double height double-fan 'Performance' radiators.  You have to buy the combo single-large heatsink thermal / common fan which is used for the xw6600 and the xw8600 currently going for about $30.00 each, used.  The part number, you can search in eBay, is 446358-001.

HP had the combo 'double height' radiator/fans available for processors used xw8600 greater than or equal to 120 watts TDP maximum per processor.  Those are double-expensive.

The process of safely removing the original processors, their cleaning and loading them safely back inside with the proper application of thermal paste (Noctua is my favorite), and then properly attach the new heaters/fans with appropriate screws torque technically maybe is something best left to an expert with experience.  Given your question, suppose you who will hire.

Tags: HP Desktops

Similar Questions

  • Need password on wake up does not work with two monitors

    I use a laptop with a second monitor attached. I have the settings set to sleep when I close the lid, and then request a password on the reactivation. He does not sleep, and if the second monitor, but when I open again the cover, it does not require a password. It works fine when I don't use the other monitor, so I don't know what the problem is. Any ideas?

    Hello

    1. it worked before?

    2. how to connect the second monitor? What is an extended display?

    3. what happens when you wake the computer from sleep mode? Are you able to look at the screen in the second monitor and the laptop successfully?

    4. What is the brand and model of the computer?

    Method 1:

    I suggest to turn off the prompt for password then that sleep and you can reconfigure the second track again and check.

    Method 2:

    If the problem persists, update the card graphics card and see if it helps.

    See the links below for more details on the update of drivers:

    Updated a hardware driver that is not working properly

    Update drivers: recommended links
     
    Hope this information helps.
  • Re: Need new heat sink of heat for my Satellite L500-1XZ

    Hello, I have to replace my radiator on my Satellite L500-1XZ together. Any idea where I can find a heatsink for this model, because I searched and searched and can't find anything yet.
    The exact model is L500-1XZ PSLJHE
    number on the heat sink is: 0a AT0920020V0 AVCS 101st

    Please if anyone has any info on where I can find heater help me! Thank you!

    I have my opinion L500 all have the same construction and I also think that you should simply seek radiator L500. With a little luck you can find it on eBay or googling autour.

    Another way to contact Toshiba nearest service provider and ask if you can order a part with this part number. I hope they can do for you.

  • reuse the heat sink with fan for computer laptop G72 nine?

    Greetings!

    I need to replace the fan on my laptop and see several put on sale with the correct part below number... but many only list the fan without heatsink at reasonable prices, but only a few include the heatsink and the cost much more!  Anyone know if the heat sink can be removed from my old fan and reused by a new one or are inseparable?  The full model is G72-B60US, which is also called a "xg988ua.  Thanks in advance!

    606013 001

    Heatsink with fan module - UMA

    They are separable, and given that the radiator is actually a piece of metal is probably defective. It is a bit of a chore to remove the old fan and install the new in the old radiator but can be done.

  • Pavilion dv7: fan / heat sink assembly

    What replacement heat sink is right for my laptop? Three options are available in the service guide:

    For use only with the computer models equipped with an Intel processor and a graphic with subsystem
    2048 MB memory discreet / discrete memory 1024 MB / or the memory of the UMA.

    Which is the right part of a Pavilion computer dv7 laptop /product WW187AV with a graphics Intel(r) HD adapter?

    Hey @Chrissy11,

    Thank you for visiting the Forums HP's Support and welcome.

    I saw on your problem on your laptop of HP Pavilion dv7t-4100 and heat sink parts numbers and issues of the manual. I watched this in HP Partsurfer and it shows the number of party as 603690-001.

    I hope this is what you need.

    Please let me know if this help solve the problem by marking this post as accept as a Solution.

    Thank you.

  • Pavilion dv7t 6100 - LM726AV: replacement of heat-sink/fan using the thermal pads and thermal paste/paste

    Hello

    The fan on my laptop died so I am trying to replace the fan and the heatsink unit. The manual that I use specifies that thermal grease should be used on the cpu and heat pads must be used on the graphics processor and the capacitors.

    The arrival of the new fan it came with heat pads on all relevant areas of the sink as a tube of thermal grease. When I removed the old fan, thermal pads have proved only on the capacitors and the components around the GPU and that thermal grease was used on the CPU and the GPU.

    My question is: how this part must be installed? Should I remove the fron pads thermal heat sink that covers the processor cpu and graphics and do not use the thermal grease in these areas? Or the thermal grease can be used here and let the thermal pads on the heat sink?

    Thanks for your help - thank you for the advice/opinions in this case.

    You can remove the protections and pass with the dough so but only f, you are sure that the metal on the core processor and graphic is in solid contact. And there, I meant it touches and also has a lower compression. For me, the thermal paste is superior coolant and should be used on really hot spots. However, if the metal is not full, solid contact you run the risk of overheating.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Macpro 2010 copper heat sinks

    Does anyone know if the copper memory heat sinks makes no significant difference to the MacPro 2010?

    The cooling tubes immersed in some models take precedence over copper.

  • HP Pavilion DV6-3210us: different heat sink? (HP Pavilion DV6-3210us)

    Hello

    Recently, I posted a message on a HP Pavilion dv6-3210us death.

    Received a motherboard replacement & after installation, I turned on. The fan ran & almost from the start, the computer turns off. When I turned it back to try again, he came with a message 'overheat '. I waited and tried again, and yet once, it returns the same results...

    Received another card mother replacement today and after further review (the original replacement is exactly the same) there is a chip with 3 screw for an another heat sink holes. It seems to be a video card with chips 4 memory along the side of it. The jury is exactly the same as the original with the exception of these chips. Does anyone know about this chip & if there is another type of heatsink / fan for it?

    Thanks for any assistance, you may be able to provide.

    Hello @Dyke67ny,

    Welcome to the HP Forums!

    I read your post and see you're wondering if there's an another heatsink for your HP Pavilion dv6-3210us Entertainment.

    I took a glance at the guide to maintenance and maintenance for your laptop, there are two different heatsinks for this model of laptop. The type of heat sink depends on the graphics used in the notebook (either discrete or UMA).

    HP Pavilion dv6 Entertainment PC Maintenance and Service of Guide

    Take a look at page 90.

    I look forward to your reply!

  • Silver heat sink compound Arctic

    I have a laptop t 1000 cto dv8, and while I don't think it's overheating, I'd prefer that it works a little cooler. Arctic silver makes a significant difference in the temperature of the CPU and GPU?

    The times ' now for both are at about 50 to 55 ° C. However the lower video sequences or animated avatars causes the time. rise to 60 ° C and even after that I closed the time programs. don't fall very quickly.

    I watched the video of reflow the where they put a thin plate of copper between the heatsink and the kernel. My question is, it is necessary that the thermal paste is placed between the copper coin and the heat sink, as well as next to the base of CPU/GPU?

    None of youtube videos show this carried out.

    http://www.arcticsilver.com/AS5.htm

    Thank you

    I tried to answer this post before, but somehow my internet connection went wrong.

    Your current time is good enough. Not necessary to apply the copper mod. Application of copper mod would increase the heat transfer, but will lose the flexibility of the heat sink, please be careful in the choice of thickness of copper.

    Reapply a good thermal paste would increase of heat transfer from the CPU to the heat sink.

    In my case, I'll do it after 2 years of use of the laptop. Portable over 2 years will be have dust stuck between the fins of the heatsink and probably have a thermal paste dry.

    Above suggestion is for the advanced users, novice users will find themselves with missing screws and interrupts here and plastic components.

    Please take some photos if you want to always do and post in the hardware section.

  • Satellite L20: Strange noise from heat sink when the power adapter is purchased

    Hello

    I own a Satellite L20 laptop and when I take the power cord out of my L20 and power to the battery on a strange sound high tone appears when I put my ear on the heat sink and can be heard normally.

    It is never used to do this.
    Any ideas?

    I don't know if you can hear the sound, as I do, when to do as you described, but this noise is coming from the CPU, when your phone is inactive or sous-travaille.

    Have it on my computer Toshiba no as well and everything I read that there is nothing to worry about and normally, you does not recognize.

  • I get the ssd drive, I need to buy recovery DVDs for y500 to install new windows with recovery

    I get the ssd drive, I need to buy recovery DVDs for y500 to install new windows with recovery

    How much it costs

    I need to perform a recovery for ssd only

    I need direct link for that

    Nice day.

    He was never a way I know of to download games Windows OEM Lenovo recovery disks. That the process is managed by Service, you'll need to contact them directly (see info below). If I understand correctly, they will confirm your OS by checking the serial number of your machine.

    I hope this helps.

    Kind regards.

  • I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.

    I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.   I had to replace the hard drive, so he has nothing about it and I added more ram, but I replace the cd player so it is not yet installed on the HP.   So I was wondering if I could put the installation disc in my laptop cd/dvd and connect computers by usb ports and install it this way and if not how can I?

    Thank you

    Hello

    You are welcome

    If the CD/DVD drive in the works of PC Gateway, you can (at least temporarily) remove it and install it in the HP, you can run your recovery disc and reinstall Vista.  Once everything is running on the HP, you can always remove the CD/DVD drive and reinstall it in the gateway PC if you wish.

    Kind regards

    DP - K

  • Coins, alternative to the copper shims for the heat sink?

    Hello, I have a question, can I use another element like a heatsink instead of the copper shim? because in my country (Venezuela), I can not find. Something like a coin, I read in the forum it is also recommended, but I want to be 100% sure because it is the first time I hear about copper as heat sink blocks/coins

    Hear also the money is good, what is nickel? can be used too? Since here the coins are made with nickel, and I don't know if it's a good metal for radiator

    Thank you

    The relative heat and electrical conductivity of metals. Money would be the best, then the copper and gold. Nickel is very poor.

    Aluminum 56 62
    Brass 28 25
    Bronze (phosphor) 28 38
    Copper 100 100
    Gold 76 71
    Iron 17 17
    Lead 9 8
    Mercury 2 2
    Nickel 20 25
    Platinum 18 16
    Silver 108 105
    Steel 13-17 15
    Tin 17 15
    Zinc 29 30

    If you want to use a coin as a heat pad/shim book try thin with a hammer then shine up with Emery cloth or it buff.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • DYMO cardscan62, do not have the cd, need the serial number to install the software.

    I have a cardscan62 dymo, not the CD, need the serial number to install the software.

    Hello

    Contact technical support for Dymo

    http://global.DYMO.com/enHK/HOWTO/CardScan_62.html

  • Need help to find and install the game Chess Titans Windows Vista for XP

    Need help to find and install the game Chess Titans Windows Vista for XP

    Hi SBOYDC130guy,

    We will not be able to install titan of failures on windows XP because it is designed for Windows Vista and Windows 7 and it's built-in game.

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for