We wants ATP to resell wireless ISE?
Hi forum,
I have reviewed the questions of 1.1 software Cisco ISE (http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11637/ps11195/qa_c67-658591.html) and it seems to me that the allowed table 5 (differences between Cisco Identity Services engine) and the penultimate order and purchase question infer that no ATP is needed for re - sale ISE with wireless license type.
Is someone on the forum can confirm that it is indeed the case?
I asked the same question to my AAGR.
Always evaluated useful messages!
Best regards, Ash.
Ashley,
Here's the Q & A that I found:
http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5712/ps11637/ps11195/qa_c67-658591.html
You place your order and purchase
Q. how can I get the engine Services Cisco identity?
Tags: Cisco Security
Similar Questions
-
Satellite L10: I want to install a wireless connection - how?
I have a satellite L10... and I want to install a wireless connection on the help on the config free pages it is said that the alternative "quick connect" appears after the installation of the projector toshiba wireless... it is what? and is anyone knows how I can do this without getting more confused?
Hello
It's Toshiba projector Wireless:
http://www.ProjectorCentral.com/Wi-fi_toshiba_tlp-T501.htm
As you can see it's not a fast connection wireless card or something like that.First of all, it would be very interesting to know the name of your unit, because I know if your laptop has a wireless card or if it of possible to update the device with the Mini-PCI Wireless card.
If your laptop has a wireless card so you need activate the wireless antenna. The switch on the side of the unit, you should find. In addition, choose the wifi with the FN + F8 key combination.
Well, now you have an AccesPoint in your neighborhood. If there isn't one available then you should see it. Go to network connections. Here, you must select the list of wireless network in network and refresh.But if you have a wireless card so you need to upgrade your laptop with the minPCI card, or the wireless USB stick or a PCMCIA wireless card
Best regards
-
I have a dell laptop with windows xp I want to use a wireless mouse but cannot understand how to turn off the pc mouse
Thank you for your help, I saved it for future use. My computer it turns out that's very smart after all the fourth test of every thing, I turned it on and the mouse remotely worked, thanks again
-
Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless.
Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless. (Instructions say I need cable to do). How can I set up wireless without buying a new usb cable
loudford73 wrote:
Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless. (Instructions say I need cable to do). How can I set up wireless without buying a new usb cable
Hello
If the instructions that you need a cable then you need a cable. On several printers now, you don't need USB cable for Setup (that's why many boxes do not have) and you can run the installation on your computer or a button on the printer.
Kind regards.
-
HP Wireless 802.11 a/b/g/n/ac dual band Mini card with Bluetooth (R) (2 x 2) and WIDI
How do we change this computer to use the 2.4 Ghz for the 5.0 Ghz a wavelength. My Microsoft Surface Pro works on why 5.0 can not this computer there is a double prohibition?
Help!
So why didn't it connects to your router on the 5.0 GHz band?
Did you have to do something special for your other 5.0 GHz Wireless N cards to connect to your router?
Answer to? N °
Then explain to me why you can't connect to the 5.0 GHz with the AC map Strip?
HP has put the designation of expertise because I have solved thousands of questions from members of the forum, not me.
It's not my problem if you cannot accept the facts of the case.
Of course, it's a card dual band.
On the band of 2.4 GHz and AC on the 5.0 GHz band Wireless N Wireless.
If you want this map to be able to connect to the 5.0 GHz frequency, then you need to upgrade your router to router dual-band wireless AC.
-
Want TS 15-j052nr: Wireless Network Card BIOS Whitelist
I want to update my card to a dual band wireless network. The service guide lists only cards Wireless 2.4 Ghz single band as a replacement options. I would like to know if my model of laptop especially has a white list of BIOS that would prevent me from installing a card that is not on the list. If so, is there a way to bypass the whitelist? Also, is there a dual band 802.11n card that is recommended for my laptop?
Hello:
Other members of the forum have changed wireless cards in this model series, so I would say that there is no whitelist on your model.
Good alternatives...
Intel Dual Band Wireless-N 7260AN 802.11 b/g/n 2 x 2 WiFi + HP BT4.0 room #717381-001
Intel Dual Band Wireless-AC 7260 802.11 ac 2 x 2 WiFi + BT 4.0 HP Part #710661-001
You need a router of AC to get the best out of HQ map.
I would try to get the cards with parts numbers because some of those generic HP while they work, may not work with some of the specialized software HP as in Windows 7 HP connection manager.
I threw in a non - HP Intel 6230 in my G1 of 350 HP, and the connection manager saw the wireless part but not the bluetooth.
The bluetooth worked well, but the connection manager could not see to turn it off.
When I realized that there is no white on my G1 350 list (since not supported from Intel card worked), I had the card N with the part number HP on what I posted above and it works perfectly with the connection manager.
Search the HP part number. You don't have to buy from HP. I got mine from Amazon.
-
want to 4500 A9T80A: wireless printing
Hello
I want 4500 all-in-one series printer. Model A9T80A.
I am connected to the internet. My wireless switch is turned on (on the printer).
I can print from my computer (i.e. documents saved on my computer).
When I go to print from the internet, I have the save option to not print.
I don't know why this has happened.
In the past, everything printed fine.
Thank you.
CR3
Hello @cr3,
Welcome to the forums of HP.
I understand that when you print from the internet it prompts you to save instead.
I would like to help.
You can print from the web browser, Chrome?
If you select change destination.
He probably returned to save in PDF format.
You can change the destination of your printer.
This will change the economy print option.
If you print from another web browser, try to run printing HP and doctor Scan.
HP printers - help print and scan the doctor for Windows to solve printer problems
-
I have an old toshiba phone that has msn phone dial inside program I use wire and that you don't have a phone number to put in what should be iI or is there a ms download
I have xp home edition Service att tech and and when I take the computer to reinstall says the same thing > I have also a gateway that has the same problem, I sometimes connect to other unsecured wireless and do not want. My wireless 802.11 was swept away in several times, what causes this and is at - it a hotfix.Hello
I suggest you send your query to the solution Center MSN for better support for this topic:
Also suggest checking with you ISP provider
-
1. to configure the router wireless in a network?
2. I want to set router adsl on a network. How can I do?1. to configure the router wireless in a network?
2. I want to set router adsl on a network. How can I do? -
HP ENVY m4: I want to upgrade my Wireless card - need to know the steps
I have an Intel Centrino Wireless - N 2230 and it only allows me to use my home network home 5 GHz. I need to replace it, but I need to know what are the steps to make sure that I buy a compatible card that support dual-band wifi connections. Thank you.
Based on HP ENVY Notebook PC Maintenance and Service Guide of m4, your computer supports the following wireless cards;
Atheros WB225 1 × 1 802.11b/g/n Bluetooth Combo Adapter - HP manufacturer 675794-001
Module Intel Centrino Advanced-N 6235 WLAN - HP manufacturer 690019-001
Intel Centrino Wireless - N 2230 module WLAN - HP manufacturer 670290-001
RALink RT3290LE 802.11b/g/n 1 × 1 WiFi and Bluetooth 4.0 Combo Adapter - HP manufacturer 690020-001
RALink RT5390R 802.11b/g/n WiFi - manufacturer 691415-001 HP adapter 1 × 1The Intel Centrino Advanced - N 6235 WLAN module is a 2 x 2 2.4/5 GHz + card Bluetooth.
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
I want to improve this map. 1. What is the recommended tools for laptop Toolkit I have to buy. 2 How much are these cards? 3. what network a/c adapters are compatible. 4. is there an official booklet I can refrence to the. PS I know that disassemble a laptop can be risky, especially since it will be the first time that I do, but if you never take any chances you will never have rewards. Help, please. Thank you.
Hello
Your machine was built at the end of 2014, you might be able to use the maps on page 4 of the following book:
http://h10032.www1.HP.com/CTG/manual/c04427554.PDF
Note: he uses 2.4/2.0GHz AMD Quad - Core A8 - 6410 APU.
Kind regards.
-
Can I connect the envy to one not wireless pc (Win 7) USB and a new PC wireless Win10. A single pc in use at the same time...
My HP C3100 unit is old and broken, sounds like a cement mixer, but still trying on USB only.
Hello
Thank you for using the HP forum.
The answer is 'YES '.
Just make sure that you download and install the software (with the correct operating system) on each of the PCs.
Hope that helps!
-
Want to join a wireless printer in XP Media Center Edition 2004.
Original title: XP Media Center Edition 2004?
Can I attach a printer wireless with XP Media Center Edition 2004?
Hi DWGSMITH,
Yes, you can connect a printer wireless on XP Windows Media Center Edition 2004.
You can follow these steps to install the printer:
(a) you can use the supplied with your printer installation CD to install the drivers for the printer on your computer software. Alternatively, you can download & install the software of the printer from the manufacturer's website.
(b) connect the printer wireless on the computer. Make sure the printer is powered before you continue.
(c) click Start menu > settings > Control Panel > printers and faxes.
(d) click on "Add a printer" in the navigation bar on the left under "Print jobs." The "Add Printer Wizard" opens.
(e) follow the wizard until you reach the page "Network or local printer" and choose "Local printer"... «or «Printer network...» "Choose the basis on the question of if the printer is connected directly on this computer or a print server or other computers on the network.
(f) type the wireless network password, if prompted. The Printer Wizard can also ask to install drivers to print before the final connection is made. Click 'Yes' If you receive this prompt.
(g) close the wizard when you get to "Finish."
Reference: To add a printer attached to your computer
To install new or updated printer drivers to update
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer -
I want to secure my wireless internet, people outside of my house
I have 2 game devices in my house I want to allow access to the internet
also use a long password with a mixture of uppercase letters, lowercase letters, numbers, spaces and punctuation marks. teengeek.freehostingcloud.com
-
Want 4502: How connect 4502 want to my Mac wireless?
I recorded the printer with my router (as is the Mac), but how the hell do I get Mac and printer to communicate among themselves, I have installed the disc printing software. Printer works OK via the port USB incidentally.
Hello! Welcome to the @Shotley forums
If you follow the steps in the guide below, you should be able to install your network wireless 4502 envy, to your Mac. If you happen to have problems, please let me know the details and you can see the error messages.
I hope this helps!
Have a great weekend
Maybe you are looking for
-
I downloaded the AVG toolbar and search engine. My computer says it installed - only it does not appear when I open Firefox. For what is - that is, when I downloaded it on my account (same computer) Admin it worked very well, but not transfer on my s
-
After installing SP3 my defragmentation system does not work
Can someone help me by telling me how to fix my defrag message system is: C:\windows\system32\dfrg.msc is not a valid win32 application. Help!Thank youSally
-
To halfway through registry corrupted difficulty, now what?
I'm trying to recover from a corrupted registry. I got to the point where I need to copy in a folder named C:\WINDOWS\bak, I can not find this folder. It is somewhere I want or make a new folder somewhere?
-
Instructions on how to change a Sansa Express mode MTP to MSC mode
Here's a PDF detailed instructions with screenshots on how to change a Sansa Express mode MTP to MSC mode. Instructions for the mode MTP Sansa Express in MSC mode
-
Error Code 80096001 appears during tried updates, will not update
I tried Microsoft Fixit 50202.msi and Microsoft Fixit.wu.run.exe and it indicates the default location has changed, but it will not restore. He also says that it has fixed the problem. Still will not update windows Vista