Weak signal of blackBerry Z10 after the latest version of the OS

I just updated my OS (10.1.0.4181) a few days ago. Then I noticed abnormalities. First of all, my phone has become weak signal. I can't access the internet as fast as I had before the upgrade. Then, my bbm notification alert keeps lighting even if there is no incoming message. I tried to turn off bbm as part of management of the hub, but it's still lighting.

Please do something about it. I enjoyed my quick navigation and cats so much before the upgrade. But now I have to wait my message to be delivered for several minutes. (

Hi Lulu,.

When you reinsert the battery are displayed notifications still lodged in the hub and it only happens with BBM messages in the hub?

Thank you.

Tags: BlackBerry Smartphones

Similar Questions

  • I still have the issue of permission after update latest version of LR

    I still have the permission problem after update latest version of LR even I already did what you suggest in the other discussion.

    I found the solution.

    You must follow the steps below:

    • Open Finder
    • Choose the menu go to, select go to folder
    • Type in ~/library and click go
    • Open the Application Support folder
    • Give full read and write permissions for everyone to the Adobe folder
    • Similarly, you have to give all the permissions file to Adobe location: Macintosh HD/Library/Application Support/Adobe

    I can made the order wrong earlier.

    Thank you all

  • BlackBerry Z10 after upgrade 10.3.2 cannot access encrypted file of cale

    My Z10 have been encrypted. I do a custom (Config and file only, not application). I did the update to version 10.3.2 leaking. I've restored my backup. The Z10 work very well, but to see that my file but I can't open.

    You have a solution to redisplay my file?

    I perform the upgrade with the ADF. But I found a backup of my file with the link to blackberry, I found the file in my PC. I have formatted the SD and copy my file in my Z10 back. Now I back all my data. Thanks for the help

  • Contacts of duplicate of blackBerry Smartphones after the upgrade to BB OS 6.0

    I now for all my contacts duplicate entries on my BB Bold after my upgrade to the new surge of software for my phone. I don't have duplicates in my Outlook contacts after the initial synchronization after the upgrade of the BB OS. When I remove one of the entries on my BB and synchronize with Outlook on my PC, the corresponding Outlook contact is completely removed. I have tried to delete the first contact of the pair on the BB, then sync and tried to remove the second of the pair on my BB contacts, then sync. The results are the same. The contact in Outlook on the PC has disappeared as a result of the subsequent synchronization.

    First make a backup of your phone (I guess that the duplicate contacts is better than no information at all in your phone).

    Then, using Desktop Manager, clear the database of Contacts in your phone. Then, perform a one-way sync from Outlook to your phone.

    See if that does not straighten him right up. If something goes wrong, you can restore the contacts of the backup that you created, and you are to where you started before you try my advice.

  • LaserJet M1132: LaserJet M1132 deleted and could not be installed after update latest version 10 of Windows!

    3 days ago 10 Windows installed in my computer suddenly updated. After the update and reboot my PC, Wndows 10 deleted my laserjet m1132 system completely! And now I can't install it again, cause Windows 10 says that my printer driver is 'suspect' and it will be disabled instalation! Auto-detection of the companions of the local HPSupport site do see no printer connected to my PC completely! And PC does not say that all the new devices were connected. WHAT SHOULD I DO?

    Hey @fliperUA,

    Welcome to the HP forums!

    I see that your Laserjet M1132 will not be installed on your PC Windows 10. I can help with that.

    To install the drivers, we will do the following:

    1. If you have the USB cable connecting the printer to your computer, then remove it.
    2. Uninstall all the software your system associated with the printer.
    3. Disable all firewalls, antivirus, ad-blockers and similar programs on your PC.
    4. Download the latest drivers for your printer by clicking on this link.
    5. If the installer asks you to insert the USB cable then plug the cable at the time.

    This should allow you to install the drivers for your printer. If it does not then please let me know what error messages you see now and I should be able to help more.

    I hope this helps and I hope you have a great week!

    If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

    If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

  • BlackBerry Blackberry Z10 to the switch Q10 Q10

    Hello, I would be gratefull if someone could explain the safest method to a Z10 to a Q10 by blackberry link.

    The Z10 is backed up, of course.

    Q10 is never lit.

    I have to login on Q10 with BB id before hanging the Q10 instead of blackberry? (I am connected with the Z10 already)

    I have peripheral link to Blackberry, or I could download a Z10 backup file and restore it on the new Q10?

    Thank you

    Yes, I had the same problem, it just took time for all BBM groups fill.

  • BlackBerry Z10 forget the device password

    Hi gentlemen

    I do have BB Z10 and when I reset the password I forgot the password!

    The problem now, I have only last chance or as you know I will loss of all data.

    Appreciate your kind help to find the best way to access and not loss my date.

    Best regards

    Hanittoo

    To add to the above, if there is a password for the device in use when the backup was created, and the backup to restore, you will be able to restore the backup, but you will need the password to unlock the device after restoring.

  • Vibration of Z10 No. blackBerry on my blackberry z10 during the call or message in normal mode

    Hello
    There is no vibration in my z10 blackberry on call or a message in normal mode. There activate the vibration on but no vibration on my cell phone.
    Vibration in vibrate mode only.
    Please give me the solution for this...

    Once you have set the vibration, you must apply the setting for applications of your choice.
    To do this, drag down on your home screen, then select Notifications. At the bottom of this page select Applications, then select this option so that is the app you want to request the notification. Make sure that vibration is selected for each application there is.

    Let us know if that helps you.

  • BlackBerry Z10 now the battery problem is irritating me...

    Now my z10 mobile BlackBerry that I bought one and half a month ago... is irritating me like anything. This phone is running at 50% of the battery... Please give me a solution for this problem...

    All the z10 stl100 1 users who face following problems listed
     
    1. mobile fires at any percentage of the battery for example 48% or 88%
    2. display 0% battery with flashing of the Red led mobile and mobile works normally
    3 status indicator giving different different percentages of battery level
    4. battery capacitor problem
     
     
    These are messages posted by different people on this forum actually pointing to the same question
     
    to resolve this problem when you think that your mobile battery indicator giving bad percentage simply turn off your mobile phone and remove the battery for more than 1 hour then re insert battery... There is no indicator problem more and your mobile will give % correct battery indicator.

  • BlackBerry Z10 getting the error "SIM card is not compatible.

    Hi, I use data perfectly on my z10, until yesterday, he stopped working and get the message 'SIM card is not compatible. Everything works perfectly, I can call, send text and even use wifi. Also, my phone is unlock. Any help would be appreciated.

     

    It is because of problem of transfer of data in general, not made mulfunction Z10 or SIM himself. Most of the time he linked with your data plan with carrier is off or never was on.

    So first step that you need is to contact you, technicians of carrier to verify you have a problem you data plan account or not.

  • BlackBerry Z10 updated the phone and now remove contact does not work

    Hi all

    I just rec'd blackberryz10 and I did an update yesterday. I now have a problem I did not before. First, he reproduced several of my contacts in the contacts in the folder, so now I have 3 or more of the same person. I didn't know this before. Also, when I try to delete additional contacts, it will not erase!

    Any HELP or ADVICE would be greatly appreciated.

    L

    Hey lquon,

    Welcome to the community of BlackBerry Support Forums.

    Thanks for the question.

    In Contacts, drag the top and choose settings. Once in the settings, how many accounts is enabled?  If there are several service accounts, change all except your e-mail account and then let me know if the duplicates appear always.

    I look forward to your reply.

    See you soon.

  • BlackBerry Z10 broke the contact on my Z10 battery - throw it out!

    Generally, a fan of BB and Z10 has been great for over a year. Now, I have a problem and no solution is apparent. I folded one of the 4 contact pins that connect to the battery. Carefully straightened it, and she just broke. It is out of warranty. Service companies tell me that they can't get on the part of BB and they can't fix it. I was told to throw the phone! My career has generously offered to sell me a new phone once I have repaid the residual of $280 remaining on my plan. Online verification, I found the part to the United Kingdom, I think this command, but the technicians tell me that they can destroy the phone tries to mount the part when even (mounts on the motherboard). It's starting to look like a VW problem, I had once, I won't bore you with the ugly details...

    Anyone got any ideas?

    It seems that part is, in effect, soldered to the motherboard of the machine, as they say. I doubt that part could cost a lot, so you're basically risking just labor costs to fix. I would probably give it a try.

    Just out of curiosity, where did you find this part?

  • Software blackBerry Smartphones after the peripheral upgrade to 4.5.0.175 on my 8830, my browser is missing

    Yesterday, I upgraded my BB device and desktop software.  I upgraded to 4.5.0.175 (Platform 3.4.0.55) on my 8830 and now my browser icon is missing.  When I opened the application loader, "browser" is located in the lighter text and if I check or uncheck the box the software tells me that no change is necessary.

    How to bring back my browser?

    On your BlackBerry device, go to:

    1. options > advanced > host Routing Table > Menu > register.

    2 send your service from your carrier's BIS site books:
    Of your handheld: http://www.blackberry.com/btsc/KB15402

    Go to the Personal Email Set Up icon and sign. Then under help!, select Service books and select send service books.

    Your desktop PC: http://www.blackberry.com/btsc/KB02830
    North American carriers - scroll down to select your carrier
    Carriers worldwide - find your operator from the list

    3. with the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart. This restart, even if you have already done this, is often necessary to install the service books.

  • BlackBerry Smartphones after the installation of upgrades for applications, the restart does not end

    When I reboot my phone after that I installed some updates for some applications, as usual--asked me to restart...

    He restarted the phone, however not completely restarts not to my home screen. Instead, he's stuck on the screen of my network provider... (o2 welcome screen)

    Im guessing it is always finished installing some updates, but it's been like this all night.

    I did a battery pull and took out the SIM card and memory card, but it always seems to be stuck on the home screen of the network provider.

    I had this problem last time, and I was informed of another forum to turn off the phone from the Off button on the phone, remove the battery and the memory card, reinsert the battery without the memory card.

    It worked perfectly the last time. Now, then the home screen displays, if I press the off button, it is 'check security software' and turns off.

    Help please!

    Hi again.

    It seemed to have fixed.

    I turned off the phone to the power button on the phone.

    Removed the battery and the memory card.

    He left for 5 minutes

    Re-insert the battery, without the memory card.

    And it starts up fine.

    Insert the memory card, and it was recognized.

    Now, the phone is normal, as it was before the updates.

    Thanks for your help anyway. According to the research I did, that my problem with the splash screen and the issue of restarting AFTER upgrades of applications took place, is the correct method.

    I will accept the solution.

    Thanks again

  • BlackBerry smartphone ERROR START UP BLACKBERRY PROTECT AFTER the UPGRADE

    I just upgraded my Bold 9700 but can protect blackberry is not open... its gives me this message net_rim_bb_dryad_gui'security.deviceUnderAttack' ymbol

    What should I do?

    Go to options > advanced > Applications and delete Protect.

    Now reboot again as described above.

    Then, reinstall Protect of AppWorld.

Maybe you are looking for

  • Satellite C850D-11 q - No. Bluetooth after upgrade Windows 10

    HelloJust upgraded to win 10... nothing about Bluetooth in Device Manager... this model not have these abilities or are malfunctioning... tia

  • NB PC ENVY 15-J120TX-HP TS: Windos 10 update

    Hello Earlier, HP support center asked me about no. to improve my windows OS 8.1 for Windows 10 due to some problems in windows 10. They ask me to roll back the OS for all these system I've updated. Once that microsoft will confirm to HP and HP will

  • WRT54G v.6

    I had this router for a little over a year. I had no problems with it until this morning. It suddenly stopped connecting. It does not connect through wired or wireless. I tried to unplug it and by him plugging back in nothing works. Anyone have any s

  • My printer does not print

    So yes, that I am running windows 7, my HP 3420 and I use 3600LIDL driver. In devices and printers, he got the Green State, everything is connected. BUT When I try to print anything, it gives me "error-printing" and don't print; / Help

  • I changed my antenna to Time Warner Cable and Media Center has stopped working

    I have Windows Vista Home Premiun Multimedia card Hauppauge 1250 I know that the card does not work because I hace Hauppauge WinTV and it works fine I can not configure Windows Media Center (Windows Medis Center has stopped working)