Web server plug in the configuration of Reporting and analysis

Similar Questions

• Are the "Oracle Hyperion Reporting and Analysis" and "Oracle Hyperion Financial Reporting," one and the same product?

  Are the "Oracle Hyperion Reporting and Analysis" and "Oracle Hyperion Financial Reporting," one and the same product?

  Alanysis and Hyperion reports has a scope of report include Hyperion Finanicial Reporting, web analytics services RA framework and the Foundation as a layer application and client level there EMP Workspace, SmartView etc.

  Thank you

  ~ KKT ~.

• could not find a server reports and analysis hyperion running on localhost port 6800. Please check your connection string server and verify that the server is

  Hi all

  We have properly installed and configured Hyperion Reporting and analysis 11.1.2.4 in windows 2012 server however when I try to logint to the workspace, I get an error like "start-up of the specified document does not exist in the repository." "Select a new start under the General Preferences tab document" monitoring of "could not find a server reports and analysis hyperion running on localhost at port 6800. Please check your connection string server and verify that the server is up '.

  
  

  
  

  

  
  

  

  HyS9RaFramework_epmsystem2-syserr:

  GsmNotFound

  com.brio.one.services.globalservicemanager.GSMException: GsmNotFound

  at com.brio.one.services.globalservicemanager.GSMFactory.getGSM (unknown Source)

  to com.brio.one.client.ClientFactory. < init >(Unknown Source)

  to com.brio.one.client.ClientFactory. < init >(Unknown Source)

  to com.brio.one.client.ClientFactory$ ClientFactoryInitializer.connect (unknown Source)

  at com.brio.one.client.ClientFactory.getClientFactoryConnect (unknown Source)

  at com.brio.one.client.ClientFactory.getDefaultGSM (unknown Source)

  at com.brio.one.web.properties.ApplicationProperties.getDefaultGSM (unknown Source)

  at com.brio.one.web.properties.ApplicationProperties.getDefaultGSMContext (unknown Source)

  at com.sqribe.WS.WSBaseServlet.setDefaultGSMContext (unknown Source)

  at com.sqribe.WS.WSBaseServlet.initLogging (unknown Source)

  at com.sqribe.WS.WSBaseServlet.loadConfiguration (unknown Source)

  at com.sqribe.WS.WSBaseServlet.init (unknown Source)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)

  at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)

  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)

  at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)

  at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)

  at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  In the workspace, it shows that the Service is pending.

  

  EMP Diagnostic Report:

  

  Can help kindly out how should I solve this problem.

  I restarted the services and rebooted the Machine but still getting the same error.

  Kind regards

  VJ

  
  

  Hello

  I've reconfigured the Reporting, analysis, and everything by, I chose "Drop table" and the issue was resolved.

  Kind regards

  VJ

• Reporting and analysis 9.3.1 migration utility is not running

  Hi all.
  
  I have installed and configured the services on windows server 2008 32-bit 9.3.1(Shared de Hyperion, Interactive reporting, SQR Production Reporting et espace de travail). After configuration, service shared, workspace, interactive studio and studio reporting SQR reporting work properly but when I installed the Migration of Reporting and analysis utility, it shows "Application is running - please wait"...
  
  I want to know it's utility reporting migration and analysis (9.3.1) is compatible with windows server 2008 32-bit? or is it possible to run this utility on windows server 2008 32-bit?
  
  
  Please get back to me back as soon as possible... I am really in big trouble...
  
  
  
  
  Concerning
  
  Rahul

  Take a look at the site of matrices of platforms supported (http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html) for 9.3.1

  I checked the pdf document, and it does not say much about the migration utility. It's here: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hsys9_install_start_here.pdf

  I'm really surprised that all other components work, given that windows server 2008 (probably because it comes from a previous version) is not in the list of supported OS.

  See you soon,.
  Mehmet

• Install financial reports and analysis

  Hi all
  
  I have a classic planning on EMP 11.1.1.1.0 Application
  
  I have installed in a distributed env hyperion... (on the three boxes... a running windows xp (machine 1), both running windows 2003 Server (machine 2 and 3 machine.))
  
  Machine 2 has... Server and Oracle Essbase.
  Machine 3 has... Hyperion Planning, workspace.
  Machine 1 to... EPMA and Bishop of Calc.
  
  Now, I need to install financial reports and analysis...
  
  Can someone please guide me as to which box should I go about installing it... ?
  
  Kind regards.
  
  Alicia
  
  Published by: Alicia on August 27, 2009 23:34

  Hello

  As far as I know, you always need to install reporting financial print server on a windows server.
  I'd go with just the implementation of Reporting and analysis on the area of windows server, but it's just my personal opinion and looking at what you have provided.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• internal web server access to the content of the network using the public ip address

  Hi, I saw similar topics, but not a clear answer about it. I have a PIX 515e with two interfaces, a web server internal (ip 192.168.0.5) and internal users want to access the server by its (99.99.99.9) ie public ip address is not using DNS. Tried the command alias ' alias (inside) 99.99.99.9 192.168.0.5 "but does not work for http. I can access the server on the local network using the public address for smtp, pop3 and ftp with or without command alias, but not the http service. Any idea?

  a few quick comments.

  a function of the command "alias" is to force the pix to manipulate the dns response. However, you mentioned that you didn't use dns.

  'alias' command will also force the pix to send traffic to 192.168.0.5 when it receives a packet from the inside and intended to be 99.99.99.9. However, since the host and the server are located in the same segment, i.e. pix must re - route the packet to the inside interface, and this operation is not supported with pix v6.x.

  In addition, you mentioned the inside host can access the smtp, pop3 and ftp using 99.99.99.9. This is interesting because the host of 192.168.0.0 would not directly have access to the host of 99.99.99.x without router.

• Force the url of the web server to hit the (slot) instance particularly jboss

  Is there a way we can force the url of the web server to hit the (slot) specific jboss instance? I remember that we can do in DAS from the drp port in the url of the Web server.
  
  Published by: 865729 on June 20, 2011 01:30

  This isn't the best forum for this question (you could get better results this announcement to the unduly JBoss: [http://community.jboss.org | http://community.jboss.org]), but I think that you can accomplish this by putting a dummy jsessionid in URL (at the first application so there is no jsessionid) and adding the jvmroute of the instance you want to hit. The jvmroute is what determines what roads of mod_jk instance demand so, theoretically, this should work.

  -George

• I format the machine. How to back up the configuration of Firefox and bookmarks for re-installing later?

  I need to reinstall my operating system to windows 7. Firefox works fine. All I need is a procedure to save the configuration of Firefox and bookmarks to facilitate the configuration process when I re - install Firefox later. Thank you

  Firefox stores all your information in a folder called "account profile". If you back up to the top (on a USB key, for example), you can copy it back later after you have reinstalled your computer (including Firefox, of course) and all your settings, passwords, bookmarks, etc. will be present again. Take a look at: back up and restore the information contained in the profiles of Firefox.

• At the start, my phone freezes on the configuration of updates and restarts

  At startup, my phone freezes on the configuration of updates and restarts. It won't let me even put my password. Automatically, it restarts and continues to do the same thing over and over again... I need help!

  What were the results of the test of the hard drive?

  It seems that things go too far and you need to perform a factory restore and reinstall the files on your system.

  Repeatedly press the F11 key at startup to enter the Recovery Manager, and then follow the instructions.  I hope that the recovery partition is not damaged.

• After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

  After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

  Yes, no extra accommodation payment is required. After editing your site and savings, click download file to the host of VTT... The info should auto fill with the same information that you used to download the site the first time. You can choose to download only files "changed" or "all files". Click OK and the old files will be overwritten.

• Safe fonts Web does not support the Norwegian letters æ, o and a. when published. We do not want to use the fonts listed, because the quality is not good published wen.  Any tips?

  Safe fonts Web does not support the Norwegian letters æ, o and a. when published. We do not want to use the fonts listed, because the quality is not good published wen.  Any tips?

  Hello

  Please try to use the glyphs Panel available with Muse.

  Adobe help Muse | Use of text

  It will be useful,

  Sonam

• SmartView connection reporting and analysis

  Anyone else using the version 11.1.2? We have installed SmartView and it is not an option to change the service provider so that we can connect to the notification and analysis. Successfully, we connected to the HFM Office provider, but when you enter the URL listxml for notification and analysis as we walked into the HFMofficeprovider it can not connect. Oracle, informed us he is supposed to be the ability to add a service, and we who are missing. They advised that we run to the configuration of the EMP again, but we do not think that this will help since we met a few times already. We are waiting your comments but just tender hand if someone else has or has had this problem
  
  Published by: jshoe on June 17, 2010 13:35

  11.1.2 Smart View uses Workspace to track shared (including R & A) connection providers. It should appear as "RAFramework - 11.1.2 - Reporting and analysis framework.

  R & A records with workspace when it is configured. Order the workspace pick up this record, you must re - run the Setup for the tasks of the Foundation of "configure logic address for Web Applications", 'Configure Oracle Configuration Manager' and 'configure the Web server.

  I would then reboot the server so that the changes take effect.

• Node EMP-architect &amp; nodes Reporting and analysis-a lost-when removing applications

  Goal-
  I'm the LCM import scene in our UAT environment. I just tried to make a fresh start.
  * I tried to remove existing Applications, planning, in respect of the sharing of services in our UAT environment (which was imported through our DEV LCM)
  
  
  
  Actions taken so far-
  
  Right click on groups of applications, checked the following & deleted.
  
  * Foundation\EPMA
  * Planning\ < two applications >
  * Reporting and analysis and Analysis\Reporting
  
  
  
  OBSERVATION (both good and bad)-
  * Good thing is - I don't see most planning applications. It's a good thing.
  * But the strange thing is that I do not have more than two nodes of BLUE color [node EMP-architect & nodes Reporting and analysis-].
  
  
  
  
  
  I am unable to EPMA IMPORT artifacts in our UAT now. It says destination no longer exists.
  
  
  What should I do? Do I have to reconfigure all once more?
  
  have I deleted any configuration multi-systems by mistake instead of remove only targeted planning Applications?
  
  
  How do I get these 2 nodes [two of BLUE color - node EMP-architect & nodes Reporting and analysis-] as he was back?
  
  
  
  Can anyone help on this.
  
  
  [Just curious, are there things to do & don't NOT for whole system EPMA.] I'll at least be aware that the things that I should never do].

  I would of thought, the easiest solution was to go to the backup, well that's if your repository HSS gets saved.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Patch for Hyperion Reporting and analysis framework Release 11.1.2.3.000

  Hello world!

  I spend my EMP and other components to 11.1.2.3.500 11.1.2.3 hyperion.

  but could not find patch for Hyperion Reporting and Analysis Framework version 11.1.2.3.000,

  found alone 20029854 Patch: Patch Update: 11.1.2.3.506 for Oracle Hyperion Reporting and Analysis Framework version 11.1.2.3.500

  PSU said he could apply to RA framework 11.1.2.3.500 (my current frame of AR is 11.1.2.3.0)

  1. where can I get patch from 11.1.2.3.0 to 11.1.2.3.500 (any patch number or direct link)

  2. could I ask Patch 20029854 to 11.1.2.3.0?

  Thank you!

  Unfortunately the version of RAF not updated after the patch, have a read of more to life than that...: include the versions of the product in the workspace

  Dear

  John

• Reporting and analysis

  I used LCM to export artifacts of objects in repository for reporting and analysis. The export went well, but when I try to import, several errors were thrown. Repository for my business objects is around 12 GB and error, the log shows is "artifact cannot be migrated. I open the workspace and randomly checked some records and they have all the same files had the other workspace. Any help that anyone on that these errors can be?

  Hi Tedd,
  There is a dependence in objects - for example, if a database does not exist, a report to this database will fail to import. Look at the dependencies.
  Another tip is to start small and then with growing experience, expand. Otherwise, you risk multiple problems, which may or may not be connected.

  Kind regards
  Philip Hulsebosch