At the start, my phone freezes on the configuration of updates and restarts

Similar Questions

• Windows xp sp3 does not start after the failure of windows update and restart.

  Hello

  My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and other options... but still nothing. I also tried to use my restore disc supplied with my pc. So far, I've only tried the non-destructive recovery to restore windows and it did not work. I don't want to lose my files that I have not saved for quite awhile.

  Can anyone help?

  Thank you

  Hello

  · The updates you have installed prior to this problem?

  You can try the steps listed in the link below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669

• BlackBerry Z10 Z10 "Please wait while your device is the software update and restart"

  Sorry if this question has been asked elsewhere but I searched and could not find an answer the applies to my particular situation.

  I have a Z10 on Bell who got an automatic update this morning (I have no note of my operating system version number or the version that I was updating to) and the phone is locked to the prompt "Please wait while your device is the software update and restart."  Update messages said it would take a lot of time and that I should connect my phone if it was less than 20% of battery.

  The Bell's Web site indicates that the version of the software is 10.3.2.2168 and the latest version of the OS is 10.3.2.2252.  I don't know how many times this site is updated, but I guess that's the version that I am trying to update?

  (http://support.bell.ca/Mobility/Smartphones_and_mobile_internet/Operating-Systems?alias=BlackBerry-Z...)

  The phone is not fixed... I can see messages turn on the lock screen and interact with the phone to get a glimpse of these messages, but if I try to unlock the phone, the message block appears above any function, I tried to launch (whether a text message, the camera, an email, etc) and I can't interact with the phone at that time otherwise than to lock again and open the lock screen up.

  At the time wherever I drag, the prompt.

  The prompt on the phone for about 6 hours now.  The battery was full this morning and had exhausted 70%, but I've since plugged.

  I have not tried a batt pull because I'm afraid of the consequences of this action after the launch of the update.

  Everyone knows this and had the phoen back? I know that 6 hours is well past any reasonable wait times in my books and was strongly tempted to restart the device... but is there here experts who recommended that I continue to wait?

  I forgot to mention that the power button was still working to give the ability to power off the unit.

  In the end, I couldn't wait any longer.  I put off the device "no risk" with the power button, rather than using the battery pull method.  I turned on the camera back later and the blackberry logo appeared.  The screen faded faded black and no lights appeared on the phone.

  I could hit to swipe down to get the blackberry logo to return to the screen, but no startup loading progress screen never wouldn't come.

  I could never get to the home screen, but the phone was actually 'ON' below.  I could call the phone and it should sound, but there is no visual indication that the phone was working and there was no way to respond.  Sliding down to unlock simply revealed the word "blackberry" in the middle of the screen.

  I did a Batt pull and this time, the logo appeared as before, but disappeared forever... and then the progress of boot screen appear.

  The words 'from 10 Blackberry OS' were visible on the bottom and rotate it beween this and "install updates".

  Start-up took a LOT of time (15-20 minutes?) but after that, everything was fine.

  Displayed software update version information and it is indeed updated to 10.3.2.2168.

• I format the machine. How to back up the configuration of Firefox and bookmarks for re-installing later?

  I need to reinstall my operating system to windows 7. Firefox works fine. All I need is a procedure to save the configuration of Firefox and bookmarks to facilitate the configuration process when I re - install Firefox later. Thank you

  Firefox stores all your information in a folder called "account profile". If you back up to the top (on a USB key, for example), you can copy it back later after you have reinstalled your computer (including Firefox, of course) and all your settings, passwords, bookmarks, etc. will be present again. Take a look at: back up and restore the information contained in the profiles of Firefox.

• My computer is stuck on the 3/3 update, and even if I force power off and restart, that just guard on that happening. What can I do?

  I run windows vista on my pc, and every time that I turn it on, it just sits on the 3/3 update and will not progress. Even when I force my PC to power off and restart it, it continues to be. The first time he tried this update, I have dropped about 3 hours and returned to the configuration to update: stage 3 of 3-0% screen. Since it always happens. My pc is unusable because of this. What can I do?

  .. .my computer came pre-installed with vista, so I do not have a disk

  Not that I recommend a repair install, but the manufacturer was required to provide a way to reinstall Windows. If the computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to reinstall Vista.

  Assuming that Vista SP2 is not installed, I recommend you open a free support incident, NIC. See the link in my previous answer. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• DCOM98 UPDATE AND RESTART THE OFFICE MANAGER

  PLEASE INSTALL DCOM98 UPDATE, RESTART THE DESKTOP MANAGER

  You have disconnected your Blackberry to your computer, then install the DCOM98 update and restarted your computer yet?

• After race updates and restarted, lock computer and shows the other user logon

  Original title: another problem user in vista

  IM locked out of my computer and shows another user login that won't let me log on what can I do? running windows vista Home premium and all reinstalled today worked very well until after the execution of updates and when I rebooted I'm now locked out of my entire system F8 does not work yet

  Hi Michael,

  If you experience problems after installing updates, you can read the following article and try the steps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Hope this information is useful.

• I'm trying to download the trial version of Illustrator, but I get a window indicating that the CC is updated and nothing beyond that. What can I do?

  I'm trying to download the trial version of Illustrator, but I get a window indicating that the CC is updated and nothing beyond that. What can I do?

  HI Margaret,.

  Please visit:http://prodesigntools.com/adobe-cc-2015-direct-download-links.html

  Don't forget to follow VERY important.

  I hope this helps.

  Concerning

  Megha Rawat

• Web server plug in the configuration of Reporting and analysis

  Hi Hyperion gurus,
  
  Please suggest: -.
  
  at the time of Configuring Reporting and analysis (taken from Web server in the configuration of Reporting and analysis)
  
  What Web server I would prefer to use for planning and working space (Apache HTTP server/IIS HTTP Server) I'm having IIS installed on my environment.
  
  If you're suggesting IIS: HTTP Port?
  
  He suggested that if I select the Apache HTTP Server Port: 19000
  
  Somewhere I read the required planning installed IIS server that's why I'm confused.
  
  
  Thanks for the reply in advance...
  
  
  Thank you
  Kumar N

  Hello

  It is up to you what you choose, most people go with the apache plugin and would go for this one, it is much more robust and rarely there at - it problems with it. The apache option will install all necessary files.

  You've probably read that you needed IIS to use EPMA.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

  I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

  Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

  I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

  Help!

  Thank you.

  So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

  I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

  Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

  Nice day.

  Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• Error message: the application has failed to start because its side-by-side configuration is incorrect and can not enter in the email and save records

  I get a message that says that the application has failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details.   I used this link to email for 2 years and NOW I can't in my email and all my saved folders.

  Hi KathyHendges,

  1. What mail client do you use?

  Step 1:

  You can try clicking with the right button on the link and select run as administrator and check.

  Step 2:

  This error code can occur due to corrupted Microsoft Visual c++ installation.

  To resolve this problem, you can install the latest version of visual C++ according to the version of Windows installed on your computer (32-bit or 64-bit) and check:

  Download and install Microsoft visual C++ from the below mentioned link:

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  For more information, you can consult the following link:

  http://blogs.msdn.com/b/developingfordynamicsgp/archive/2010/08/20/side-by-side-configuration-is-incorrect-error-message-given-launching-Dynamics-GP.aspx

  Hope this information is useful.

• Computer with vista freezing to the configuration of updates.

  Both solutions online, thank you.  The last time he did this, we manually close it and it caused all sorts of things for not being straight including a place to restore and we had re configure internet explore.  How can you re start without shutting it down?

  Hello

  You must close it restart if it is frozen

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Vista 32-bit Home Pemium does not start after the automatic update. Crashes 90% during step 3 of the configuration of update.

  Started to start for the first time today, and after half an hour of PC was still at the stage of configuration update 3 to 90%. Tried to restore the last good configuration without success. IE 9 has been installed yesterday and I rebooted a couple of times very well. I guess an automatic update downloaded all night is the problem.

  Hi Dick50,

  Try the following and check if it helps.

  Method 1: Try to start the computer in safe mode and see if you can start fine. If he is able to start try to perform a System Restore.

  System Restore: frequently asked questions

  Method 2: If it is impossible to start then try to boot into the Windows recovery environment (WinRe).

  ·         Do the Startup Repair.

  ·         Achieve the restoration of the system from the same options.

  Method 3: Once you are able to start normally, look for the updates and take note of the update that is offered.

  Just reply with the results.

• Firefox starts up. Said 'it's embarrassing... "but do not restore or close because never answers. Updated and restart without help. Cannot access the options.

  Unresponsive. Updated and rebooted without success. Can't seem to 'options' due to no response. Always 'it's embarrassing... "but to restore or close button ends up making inadmissible browser. Closed with Taché also. Can't get into safe mode.
  BP-20b2f065-d592-4b67-8020-7714a2130305

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!