Similar Questions

• Web service runs is not on the android device.

  Hi all

  I use JDeveloper 11.1.2.3.0. Successfully, I created a web service through controls of data with the following URL:

  " http://10.10.30.54:7101 / MobileExample-model-context-root/AppModuleService? WSDL"- 10.10.30.54 is my computer's IP - "

  I try to open this URL through a browser chrome on an android device. The web service normally opens in the browser from my computer and other computers on the network (locally) through the ip of my computer. However, I can't open it on the mobile device. I even tried a different port (8080) but still nothing. I connect the phone through a wifi network that has full access to my LAN.

  Any ideas?

  Mohamed.

  The AndroidManifest.xml must be deployed with the Android app.

• After that download site on the internet Web browser says page not found, file 'null' is not found.  Also in the Muse I can't preview the site or pages more. Never had a problem and now I don't know what to do. In Safari and Google Chrome it

  After that download site on the internet Web browser says page not found, file 'null' is not found.  Also in the Muse I can't preview the site or pages more. Never had a problem and now I don't know what to do. In Safari and Google Chrome there is no problem on the internet, but I can't be seen.

  OK, so your last post, it seems the widgets are the cause of the problem. Let's see if we can understand why:

  • Have you tried to create a NEW Widget of emptiness of Composition and which fill with new content?
  • Have you tried a full download instead of only changed files?
  • Also can you check with domain host that send you to the right directory, and whether or not they have made changes to the ftp upload?
  • When you export the site in HTML format instead of FTP download and compare the files that are generated in the HTML folder, they are identical to those published via FTP?

  If this does not help, it would be useful that you could provide us some screenshots of errors you are seeing, you use parameters of publication etc. (you can block-out user name and password for security reasons of course).

  CARI

• END point URL for the routing service BSE says not FOUND

  Hi all

  For services of routing in BSE, the WSDL link opens the fine, but the link to endpoint URI for the routing service fails with the message below the message. When I invoke the WSDL with SOAP UI, I'll be back the same error message. I tried to bounce the server, but no help. I also noticed that this slide ESB_Projects Directory gives error 404 on any browser.

  Then, when I click below url for all the routing service

  http:// < hostname >: < port > /Event/ < systemName > / < serviceGroupName > /AddressStandardizeRS

  I get the error in the browser - below

  Not found

  The URL /event/ requested < the system name > / < group name > / < Routing Service name > was not found on this server.

  Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server Server at odevsoa.local1.wbcgp.com Port 7777

• vmrun - error: the specified service provider was not found.

  Hello

  I installed vmware server 2 on Gentoo 2008.0.

  Installed versions:

  VMware-server 2.0.1.156745 - r3

  VMware-modules 1.0.0.24

  VMware vix 1.6.2.156745 - r2

  Everything works fine from a remote machine, but if I want to start a virtual machine in the console via vmrun, I get this error message:

  Error: The specified service provider was not found

  Any suggestions how I can fix this problem?

  The problems seem to stem from the fact that you don't have the "vix.libdir" parameter in your global configuration file. Usually, it is located in/etc/vmware/config by the presence of a line like:

  vix.libdir = "/opt/vmware/vix/lib"
  

  If you add to that, vmrun needs to start working.

• Wzcsldr2.exe - Entry Point not found the procedure entry point apsGetReady cound not found in the library wlanapi.dll dynamics. apears after startup

  ---------------------------
  Wzcsldr2.exe - Entry Point not found
  ---------------------------
  The procedure entry point apsGetReady could not be found in the library of links dynamic wlanapi.dll.
  ---------------------------
  Ok
  ---------------------------

  Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Googling a bit (very little) reveals that the file wzcsldr2.exe or wzcsldr3.exe belongs to a kind of device from D-link wireless connected to your system.

  Fact that sound familiar and you have something like this installed?

  If Yes, then I would get the page Support D-Link and find the latest driver for any device you use and install it.  You may need to first uninstall your device running - I'm sure they must have instructions and tips for the procedure.

  They also have an active Support Forum where you can post your problem/question to see if people there can help you get there.  There is already some discussion in the forums about the problems you describe, but since we know absolutely nothing about your system, you should probably take it yourself.

  I found a few other ideas through Googling, but I don't like some of the ideas I've read and if you stuff worked before, what do you think has changed since the last time it worked correctly?  Did you update or reinstall your device from D-Link or drivers, lately?

• NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

  Hi all

  I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

  They read as follows:

  NtrigApplet - unable to connect to the driver: failure to open the device

  TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

  CAN SOMEONE PLEASE HELP?
  THANK U :)

  Hi the apprentice 85,

  Remember to make changes to the computer before that happened?

  Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

   

  Step 2: Put the computer to boot to determine which program is causing the problem

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message: Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the dynamic library CSCDLL.dll, Quickbooks 2012 run

  Original title: error Ordinal 62
  I received the following error sporadically when I try the accounting version of Quickbooks 2012.  Accordingly, it does not run Quickbooks on my desktop but it allows me to run on my laptop.  Help, please.  "Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the CSCDLL.dll dynamic link library.

  Hello

   

  You can try the following steps and check.

   

  Method 1:

  Check if there is a cscui.dll C:\Windows\SysWOW64 folder.

  The cscui.dll does not exist by default in the C:\Windows\SysWOW64 folder.

  If you find the cscui.dll on the C:\Windows\SysWOW64 you can try right click and rename the cscui.dll to cscui.old.

  Method 2:

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 3:

  You can also perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also check the following thread link and check.

  WARNING 62 Ordinal not found in cscdll.dll

• When I connect to the internet, servads pop up. I ran malwarebytes anti malwalre and microsoft security analysis. Not found the problem of servads in their analyses.

  When I connect to the internet, servads pop up.  I ran malwarebytes anti malwalre and microsoft security analysis.  Not found the problem of servads in their analyses.  How can I get rid of the servads.

  Hello

  1. what web browser do you use?

  2 have had any changes made to the computer before the show?

  If you use Internet Explorer, please follow the methods.

  Method 1:

  If you see pop-ups suspicious, bars unwanted tools, redirects, strange results or other unexpected behavior on your computer, you may have been deceived by installing malicious software (also known as 'malware') on your computer. This behavior is known as the browser hijacking.

  To correct your hijacked browser I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:

  http://www.Microsoft.com/security/spyware/browserhijacking.aspx

  Method 2:

  Step 1:

  Start the computer in safe mode with network and perform antivirus analysis.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  Perform an online virus scan.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 3:

  Follow the steps in the link.

  http://Windows.Microsoft.com/en-NZ/Windows7/Internet-Explorer-pop-up-Blocker-frequently-asked-questions

  Method 4:

  optimize Internet Explorer and check.

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/936213/ro

• Hello, I would just remove my ADOBE ID but I have not found the right place to post my question! Could you help me?

  Hello, I would just remove my ADOBE ID but I have not found the right place to post my question! Could you help me?

  What do you mean by "delete my ADOBE ID"?

  The following link might be useful.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Support of Adobe ID and registration of chat (non - CC)

  http://helpx.Adobe.com/x-productkb/global/service-C1.html ( http://adobe.ly/19r6ZDp )

• When I tried to import pictures from my camcorder videos seem to be import of Strontium.  After finished importing is not found the videos at all.  Any ideas?

  When I tried to import pictures from my camcorder videos seem to be importing into "Strontium".  After finished importing is not found the videos at all.  Any ideas?

  What is "strontium"?

  There are 9 different versions of iPhoto and they run on 10 different versions of the operating system. Tips and tricks for dealing with issues vary depending on the version of iPhoto and the version of the operating system. In order to get help, you need to give as much information as possible. Include things like:

  -What version of iPhoto.

  -What version of the operating system.

  -Details. Full, a description of the problem as you can. For example, if you have a problem with export, then explain by describing how you try to export and so on.

  -History: Is it going hard? Everything has been installed or removed? -Are there any error messages?

  -Have what measures you already tried to solve the problem.

  -Something unusual on configure your? Or how you use iPhoto?

  Anything else you can think of that could help someone understand the problem you have.

• Skype error: "Skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport...". »

  Sorry for the ridiculously long title, but that is exactly the error I get.  When I contacted my friends @ Skype that they just told me it's associated windows problem.  I thought, but the error message appear says SKYPE not Windows. Anyway, there is a certain irony in all of this that Skype is a Microsoft company. I'm absolutely furious since Skype perhaps in conjunction with Windows has developed a kind of points of failure...

  Original title: skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport could not be found in the dynamic link library.

  Please note that the thread referenced in 'Question (1)' has been marked as the answer by a moderator, and not by the person who asked the question.  It is highly unlikely that will help in the Safe Mode, starting in a start-up in minimal mode or sfc/scannow configuration. Of course, you're welcome to try these things.

  Uninstall and reinstall of Skype as suggested in "Question 2" would have been my first guess, but a bit of searching online suggests that it also assisted.  Again, try if you wish.  When you uninstall Skype, you will not lose your contacts.

  Research online, I've mentioned suggests that the problem is caused by software Kies from Samsung.  You have this installed on your system?  If so (or even if not), go to C:\Windows\system32 and rename avrt.dll.  You can call it avrt.dlX or something else you like.  Reset.  Let us know if that fixes the problem.  If it didn't, or he did something another break, you can always change the original name (this is why rename is safer than deletion).

  Reference: http://forum.renoise.com/index.php?/topic/31412-solved-ntdlldll-ntalpcsendwaitreceiveport-error-on-startup/

• Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  has recently had to restore my old computer. When I try to play games on facebook its telling me to install adobe flash plyer x. but it will not be installed. Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Dirext-x-file-d3d9dll-is-missing-Baz/2c639497-CFBA-4C6D-9155-f946f8dc1a45

  It will be useful.

• Why does my computer keep saying not found the macromedia flash?

  Suddenly, a window will come up frequently and it says: error-not found the macromedia flash. How can I get rid of this. I have a new lenovo computer and I have never seen it before. I have java and vlc media player and windows media player and I want to stop saying that. How can I get rid of him and why he suddenly do this?

  Hello Janet,.

  1. you receive the error message when you use a particular application?

  2. don't you make changes on your computer before this problem?

  (a) If you have Adobe Flash Player installed, I suggest to uninstall Adobe flash player completely using uninstall Adobe program.

  (b) once done, you try to install the latest version of flash player and see if the problem still occurs.

  http://get.Adobe.com/flashplayer/

  Hope the helps of information.
  Please post back and we do know.

• Twister.exe point not found the procedure entry point LeaveCriINDX (not found in KERNEL32.dll dynamic link library

  Original title: Entry Point not found error with a game

  My game (Nancy Drew: trail of the Twister) has malfunctioned or something. It worked fine for a while, but now I get this error when I try to start the game (twister.exe point not found the procedure entry point LeaveCriINDX (not found in KERNEL32.dll dynamic link library) none of using the solutions of HERInteractive.) My OS is Vista. Help, please!

  Hello

   
  I would like to inform that the error, the entry point not found:

  This error could be related if there are some missing files to initialize the game. I suggest that you uninstall and reinstall the game and check if you have the same problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Also check if the minimum requirement of games is the specification of your computer.