Webcam not working "please connect a webcam caught in charge."

Similar Questions

• explore my internet does not work, please tell me how to solve this problem, it does not connect to internet

  explore my internet does not work, please tell me how to solve this problem, it does not connect to the internet while I have internet and other things could be used

  Hello

  Can you tell us more? What is the model of the unit? Do you have the same problem when using other browsers?

  Maybe you should just clear the cache or delete cookies? Try this link here.

  I hope that helps!

• in my facebook system is not working please hepl me quickly

  Sir in my system Facebook does not work Please Sir help out me quick plllzz

  1 click the Facebook
  button in the toolbar
  and select Remove
  Since Firefox.
  Then you will see a
  confirmation dialog
  asking if you are sure
  you want to remove
  the feature. Click
  Delete Facebook
  Messenger to
  Turn it off completely.
  After that Messenger should be
  completely disabled.
  Then connect to your
  Facebook
  Facebook.com and visit facebook.com /
  subject / messenger.
  for firefox
  Then click on the Green
  On the button. The
  Sidebar Messenger
  opens and
  confirmation
  message will be
  shown.and click OK in the
  confirmation
  message to activate the
  feature on.

• my audio does not work please help

  my audio does not work please help. Thank you!

  Hi no thanks,

  1. What is the brand and model of your system and sound card?

  2. when the problem started?

  3. did you of recent changes to the computer?

  You can try to run the sound troubleshooter and see if it helps.

  No sound in Windows

  For more information, you can also consult the following article:

  Tips for solving common audio problems

  Hope this information is useful.

• Hi my audio - pc does not work please help me

  Hi my audio - pc does not work please help me

  Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.

  Resources:

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• I installed it on a new computer and my password would not work to connect, now I can not connect on any of my devices and reset email does not get sent?

  I have a new computer. I installed the beta version. I run beta 2 other computers a Tablet and my phone. He taught me that I needed to separate other devices and try again. My credentials will not work and a reset email hasn't shipped yet. I would get my devices connected and connected again. If this is not possible I reluctantly will go back to explore. Mozilla has been so easy to use so far? Very frustrating.

  Hi bizebill,
  Thank you for your question. I understand that you want to synchronize all your devices. Please make sure that all the devices are updated at least at version 29.
  If you were on a version before that, you need to set up a new email and the password with the new synchronization.

  I hope this helps.

• Equium M40x does not work with connected AC

  Hi all

  I have a laptop Toshiba Satellite M40x-189, there little about 2 years and recently I have problems with it.

  The laptop when it is connected to the Board, the green light appears, but after 5 seconds it laptop turn off. the looks of dead battery, because it does not load normally, I keep connect and disconnect the AC, so that the orange light appear sometimes, sometimes for 5 seconds only. It's frustrating. When the drums come to start getting free he takes forever to be full. just at the moment where there is a load on the battery, that I can work on the laptop, even with the connected AC, but instead to use the AC laptop running on the battery, which usually lasts less than an hour, and then it's the bit of history.

  All I need is just to work with connected AC, because I normally just use the AC.
  Well I don't know what the problem is, can someone help me please

  Hello

  For me, it looks like a problem with the electronic power supply on the motherboard.
  I don t think that there is an adapter of wit AC problem itself or with the bad connection between the power supply and the Commission.
  If the AC adapter would malfunction the battery would not charge. But charges of battery, it collects a very slowly but it charges

  Finally I n t think you can do something you go to the service of your country. In such cases you re on the right side

• HP Envy m6 1125dx: USB Ports are not working please help

  Hey all,.

  I had problems with my USB ports on my laptop Hp Envy M6 1125 DX. Only 1 usb port works and the rest do not work. I tried everything to update the BIOS updated the drivers from the site. I don't know if the driver is not installed or if it's just a bad USB port, but I didn't really notice it until recently, when I bought a headset and I couldn't use it as my only working port is used by my mouse.

  In the USB tab in Device Manager, it has the following features;

  Generic USB hub

  Generic USB hub

  Family of chipsets Intel (r) 7 series/C216 USB Enhanced Host Controller - 1E2D

  Family of chipsets Intel (r) 7 series/C216 USB Enhanced Host Controller - 1E26

  Composite USB device

  Composite USB device

  USB root hub

  USB root hub

  None of them have a yellow exclamation point so my best guess would be that is missing the drivers for the rest of the ports, but I have no idea. I'm in for this reason excrutiating pain, I'd appreciate any help.

  Thanks in advance!

  Hello @jgasca23,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the issue of the USB port and wanted to help!

  First of all, try to review the following document and let me know how it goes:

  HP PC - troubleshooting connections USB (Windows, 10, 8)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Windows Media Center online media NOT WORKING Please HELP!

  I like to use Windows Media Center online media, but it has stopped working.  When I click on a video of MSNBC all this is idle as if his will load but the video never starts.  In January I had to install a new anti-virus program. Could he be playing with my media center?  Also would it be my wireless connection? I live in a dorm, and everyone here has said that the connection was slow.  HELP Please!

  Hi liis177,

  Follow the instructions in the link below that may help you resolve the issue:

  Windows Media Center stops responding when you open an online service in Windows Media Center on a Windows Vista-based computer
  http://support.Microsoft.com/kb/954588

  Check whether the problem is resolved.

  This problem may occur if Windows Media Center update process (Mcupdate.exe) cannot access the data store, or if it is damaged. Try to rebuild the Media Center data store that could help you solve the issue. To do this, follow these steps:

  1. Click Start, type run in the start search box, then click on run in the list programs.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.
  3. in the details pane, right-click right mediacenterdatastore.db and then click Rename.
  4 rename the file in mediacenterdatastore.old
  5. run the file, %systemdrive%\Windows\eHome/mcUpdate.exe
  6 start Windows Media Center.
  Check whether the problem is resolved.

  If this does not work, try to update the latest service pack that might help you resolve the issue.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Disk Defragmenter error - CHKDSK /F tried many fixes listed in this site & they do not work - please help! Windows XP

  I have the problem of error Disk Defrag as described in many articles on this site and I tried to use your method of repair twice, both times which could not solve the problem.

  I have a "dirty Bit", as shown in the second line, but your other directions does not solve the problem.  Please note that after your direction to type chkdsk c: /f /r ask Y / N question which you note in your direction.  the system won't let you leave without answering the question. I tried both Y & N responses and both failed to solve the problem.

  My problem started with me updating my Itunes program.  I tried to do the update, but for one reason or another that the update would not take, I took all the update prgrams (new) is installed.  That's when all my problems.

  I lost half of my available disk space on my c: drive even if I removed the additional programs, and more I can't defragment my c: drive as I continue to get the chkdsk /f error code.

  I'm running an old Sony Vaio PC with 60 GB of available disk space. Windows XP.

  Any other suggestions?  I searched around on google and there are all kinds of software "for sale" and repairs that do not also work that supposedely will solve the problem.  I don't want to lose money on something that should be an easy fix.

  Help, please!

  We'll walk though...

  You cannot run the defragmentation on a volume where the dirty bit is set - you must clear the dirty (somehow) bit first before running chkdsk.

  Checking the sale but with fsutil is a good idea and you said that your disk is dirty.

  He probably got the dough to a power interruption (in general), aborted restart or an abnormal termination.  None of this happen or familiar?

  When XP starts, it checks to see if any volume is dirty and if any volume is dirty, XP automatically start chkdsk on it because she would like to fix it for you.

  The only thing that can clear the dirty bit is a successful execution of chkdsk/r.

  The following idea:

  chkntfs /x c:

  That puts a bit in the registry that tell XP to not even check the volume dirty bit... never, so if the disc is dirty, the auto chkdsk will not work on the disk since you already told him not to do so and it remains dirty.  Maybe this isn't a good idea unless you plan to undo it someday.  This part seems to be absent from these instructions (how to cancel it).

  If I were you, I would that result than now because it it really in your best interest to leave XP check the volume and try to fix it if the bit of impurity if she set, right?  Why do you want to tell XP not to check your volumes when they could really need to check?

  To cancel this order, enter the following command:

  chkntfs /d (you don't have so specifies a volume).  That sets everything back to the 'normal' and also removes all pending the command chkdsk, you may have said YES to previously.

  Now your volume is still dirty (you can check it again).

  If your chkdsk to run at reboot and it's not clearing the dirty bit, you can see in the Event Viewer Application log to see what happened:

  When chkdsk runs automatically restart, the results appear in the Event Viewer Application log.  You will need to get there after the disk check performed and XP has finished loading for the results and all the problems. If it looks like nothing, look at the report in the event log Viewer Application.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Look in the Application log for a Winlogon event, something as a source (yours may be different):

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Description:
  Checking file system on C:
  The type of the file system is NTFS.

  One of your disks needs to be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue.
  Windows will now check the disk.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.

  976751968 KB total disk space.
  31923620 KB in 81911 files.
  24564 Ko 5968 index.
  0 KB in bad sectors.
  188136 KB in use by the system.
  65536 KB occupied by the log file.
  944615648 KB available on disk.

  4 096 bytes in each allocation unit.
  244187992 total allocation on the drive units.
  236153912 allocation units available on disk.

  Windows has finished checking your disk.
  Please wait while your computer restarts.

  Sometimes it seems that even if XP running chkdsk for you, the dirty bit still is not cleared for any reason, then simply start it yourself from the XP Recovery Console.

  What I do in cases like yours to run chkdsk/r from the XP Recovery Console you can actually see what happens and watch him run (waiting).   When it's done, you can't question the impurity of the RC bit, but you can run chkdsk/r again until he come clean, and if he can, it clears the dirty bit too.  It does not hurt anything either to run chkdsk/r, even when there is no 'need' to be executed.

  You can get in the RC since an authentic Windows XP installation CD, or you can make a CD of bootable XP Recovery Console if you don't know what kind of CD, you have (no XP media required).

  I'd just a console RC bootable CD, so there is no doubt about what you have for a bootable media.  You can always use it again another day (it might be quite useful).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Bridge does not work for connections of the app?

  I was travelling this weekend after receiving my PlayBook on Thursday.  I tried to use my sister BlackBerry phone inbetween airports and hotels to try to connect to the internet via BlackBerry Bridge.  What I found, it was, the bridge has worked well to get the messages from the phone, but when trying to browse the web required from the bridge browser, which was extermely slow and pretty useless.  In addition, all applications requiring interenet access, would not work.  I tried the simple Weather app.

  So, is this the case?  The bridge will not work with applications to allow them to connect to the Internet?  Or could it just be the particular connection, I had?

  Yes, I think that this is the case.

  You can read this article for more information:

  http://CrackBerry.com/BlackBerry-bridge-vs-Internet-tethering

• Browser blackBerry Smartphones does not work, please help.

  I have had my Blackberry for about a month and a half.  For the first weeks, the browser worked fine and everything was great.  But now, the browser does not work.  My email, twitter, facebook, etc. all are still working fine, but can not access anything through the browser.  Does anyone know why this might be?  I know that I have to take it to the company store, but I live in a Spanish speaking country and don't speak much Spanish.

  Thanks for any help!

  Hi and welcome to the Forums!

  I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come):

  (1) registry HRT

  • Homescreen > Options > Advanced Options > host Routing Table > (it matter little what line is current) > sign up now

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If not, then please provide delicate symptoms of what's going on... "does not" isn't really we give good to go. Is there an error message any?

  Thank you!

• Keyboard and mouse do not work when connecting

  I have windows 7 and ubuntu 9.10 "multiboot". He had been working well, until I rebooted. I had just done a WinPE boot drive, and I wanted to test it.

  Now the keyboard and mouse do not work on screen or login in safe mode.

  Help, please

  LKGC?

• my audio/sound is not working, please help

  my laptop audio (or audio) has suddenly stopped working even though I got my laptop, which is a Toshiba, in September. its doing this for awhile to calm now. I turned on my laptop so when I go on YouTube don't play sound. I noticed that there is a white "x" on a red background near the speaker. Click above to see wants wrong with it, then something is displayed with so-called "Reinstall device driver. There is a problem with the driver for the device high definition audio. "Reinstall the driver may solve the problem" so I click on 'apply patch' . When I click on that, it then says ' troubleshooting is complete. Troubleshooting failed to automatically solve all problems. you will find more details below. problems were high definition Audio device has a driver problem '. I don't know what to do and its really annoying me. I only got it for three months and already

  their something wrong with it.
  PLEASE HELP AND ANSWER ASAP PLEASE!
  
  
  ALSO, my laptop is a window running on 8.
  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Photoshop CS6 "save under" does not work - Please Help!

  Hello!

  I have a question, and I can't seem to find a lot of answers for her

  So I have Photoshop CS6, and I know how to use it, I was

  used for a while. Everything worked fine on my old laptop,

  but I encountered some problems on my new laptop.

  So I worked on a painting for hours, everything was well-oiled

  Once I'd had enough and will save my. PSD as one. JPEG

  For some reason when I click on "save under" nothing appears

  The usual pop-up window did not show upward, not even an error window pops - up program

  I am really confused and extremely frustrated

  I was clicking on the "Save as", but still nothing is happening, I tried to restart, and it did not help.

  My "Save" pictures normally, but the "save under" does not work. It is not grayed.

  My picture is RGB 8 bits, the size is 900 x 1200 and image resolution is 300

  I use Photoshop CS6 on my Lenovo Yoga 3 Pro 1370

  Someone please help! I was very frustrated by that.

  Try to reset the Photoshop preferences:

  Hold down the CTRL - Shift - Alt from the cold Photoshop start.  If you get the keys to the low enough - quickly and you have to be VERY fast - it prompts you to confirm the removal of your established preferences, which will lead to them all being the default value.