Free run event counter when counter source is low
Hi all
I'm trying to implement a counter of simple events on a 6036 using NiDaq and VB6. I have connected a quadrature encoder to board one on pin of counter0src phase. Configure the counter is a counter of events, not winnowed. Start the meter and all is ok except when the counter0src PIN is low, the meter will record the random impulses. A voltmeter attached to pin watch 0.0 x volts and no tension noticeable glitches. If I short the PIN to ground, it has found no consideration, false impulses themselves.
Any thoughts?
Dan
That's the information I was looking for, even if it wasn't what I wanted to hear!
Tags: NI Hardware
Similar Questions
-
Original title: Windows XP - free race - is lost.
Just re - load windows XP after a crash with original rescue discs, svchost.exe is free running and leaves several Windows Open gel, all on and offline. Any ideas? I ran ms-fixit beta for all listed. I also disabled Norton and now use Windows Defender, still no luck.
Hi MarkBerri,
· How long have you been faced with this problem?
· Did you do changes on the computer before the show?
Svchost.exe is a process name generic host for services that run from dynamic link (dll) libraries. The Svchost.exe file is located in the folder C:\Windows\System32. At startup, Svchost.exe checks the registry services part in order to build a list of services that it needs to load. Multiple instances of Svchost.exe can run at the same time. Each Svchost.exe session can contain a grouping of services. Therefore, separate services can run, depending on how and where Svchost.exe is started. This grouping of services enabling better control and easier debugging.
Svchost.exe groups are identified in the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\CurrentVersion\Svchost
You can run the auditor of system files on the computer.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
Note: if it asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:
http://support.Microsoft.com/kb/900910 (valid for Service pack 3)
Hope this information helps.
-
I have to run windows security when I am currently using Norton 360 Prime Minister?
I have to run windows security when I am currently using Norton 360 Prime Minister? Thanks (in advance) for any help with this?
Personally, I do not recommend norton but his preference of the user.
See thishttps://blog.kaspersky.com/multiple-antivirus-programs-bad-idea/Choose an anti-virus program<>(are much more free/paid, good antivirus and make a decision to find a suitable antivirus for you, you can see the link... ) Selection of a good antivirus is only ( up to the preference of the user)
Microsoft recommended anti-virus companies are here... http://Windows.Microsoft.com/en-us/Windows/antivirus-partners#AVtabs=Win7
-
Run a process when you leave a page
Hello
Is it possible to run a process when the user leaves a page?
Let me explain:
On a page, I have an automatic processing of the line (DML) and a process of PL/SQL. These two processes are running when users click on the apply changes"" button.
Is it possible to run these two processes ALSO when user leaves the page (click on another tab)?
I want to do this to make sure that the changes are saved, even if users forget to click on the button "Apply Changes".
Thanks in advance for your help.
Have you looked into using a pl/sql dynamic action page unload event? I've never tried, but if you set the item values in the first stage of dynamic action and then run a pl sql routine that mimics the DML, it can work. Given that the action would fire after each unload page, probably also needed validation to provide he fire during normal processing.
Ricker
-
I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?
I want to erase the hard drive and use it to install windows xp.
From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.
Does not help, but could help to point you in the right direction...
-
original title: subject zootycoon
my computer can not be run Zoo Tycoon, when the running game does not appear anything, help me! my computer is Win7Hello
1. what version of Zoo tycoon you play?
2. is it works much earlier?
I suggest to run the game as administrator and check.
I suggest you to follow the steps from the links and check out.
Improve the performance of your computer game
http://support.Microsoft.com/kb/815069
The problems of the game performance
http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems
-
What is event ID # written in the event log when a user compresses its C:\ By car
Windows XP Pro - SP3
I want to know what entry # and details entry appears in the event log when a user compresses its C:\ By car
There is none. But if you compress ntldr in the process you will certainly get an unambiguous error message when you restart the computer.
John
-
problems with wireless Vista "local only".
How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?Hello
Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer. Since he does not have details of the database of network devices, communicate with him.
- You are able to access the Internet?
Try the steps mentioned below and check:
Method 1:
Step 1: Enable or disable a network adapter and then check:
http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter
Step 2: Run Network Diagnostic tool and check:
Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Method 2: Wi - Fi and in Windows network connection issues:
Reference links:
Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041
Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx
Hope it works.
-
Original title: Program Files gone?
Recently, I started my computer and noticed that a bunch of files are corrupt, and left most of my shortcuts. I went into Program Files and discovered the entire file completely empty. The computer says to run chkdsk b/c the program files are corrupted. When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk. When I reboot, the chkdsk never runs.
My wife has all of its graduates work on the computer, I backed up since then, but I try to avoid doing a restore of the entire system. Can you help me?
I am running Microsoft XP.
Sorry to hear that you are having problems with your XP system. For XP support please visit the link below
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.WindowsXP.GeneralAlso, try to start the computer in Mode safe.
When the computer is switched on 1, start pressing F8 until you get a menu of Windows startup, choose Safe Mode.Sounds like something important happened (corruption). If you have important data there (for example, your wives, diploma work), I would strongly suggest taking the computer to a qualified technician so that they can recover data out of there before the drive goes down or the o/s is too damaged.
Good luck
-
Original title: the tool Defrag
Defragmentation runs of himself when he isn't scheuled. He begins to scan the C drive when he wants and won't run a defragmentation when I click on defrag now.
I put it on a timed m.o. and it ran for about two seconds and said that it is complete.
Hello fossil man,.
You have a set schedule in place to defragment at certain times? If you do, go to the Planner and that cancel out. Then see if you are able to reproduce this problem.
Schedule disk defragmentation:
http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-Disk-Defragmenter-to-run-regularly
Please let us know status.
-
How to run an application when the cell phone is power on
I want to run an application when the cell phone is power on. It runs in the background, how so, please give me a code, I don't know, thanks
It is enough to set project properties in JDE as shown on the attached photo (check below: screenshot.png).
-
My computer is running slowly and when I run the troubleshooter
Original title: program managed at first to the top
My computer is running slow and when troubleshooting i run it say tha I have a problem with programs that run at startup of some are unnessasary, I don't know what is supposed to work at the start could you help me
How to configure Windows to start in a "clean boot" State
Vista: http://support.microsoft.com/kb/331796Also: You can have too many applications running in the background,
as more than one anti-virus software application both value run
in the "Active analysis" which will slow things down.
If you want to dig deeper:
Try Autoruns from MS Windows SysInternals site:
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
SysInternals Forums: http://forum.sysinternals.com/AutoRuns show/list all apps/etc that load/run when you first start...
(the tab "Boot run'),
When you connect (the 'Connect' tab) and other programs that load
(grouped by labeled tabs) for easier viewing.It also offers the possibility of selectively allows you to stop
(use with caution) any program you do not want to load.
You can undo changes that you have made.Note: To get additional details an item in the list you can not
identify easily you need to perhaps highlight the item (right click) and use
the "Online search" option to get the details.
particularly useful for the more obscure items in the list.Probably one of the most noticeable slowdowns when
startup can be caused by the AV software Some products
now includes "Boot Scans" and "quick scan".
(when you sign), this compound with other programs
which load when you open a session and you can see a notable
downturn of a PC you have just re-installed XP has to the
even the once installed PC on one or several products AV.This does not explain far too long 'Boot.
times, but the icons see you at the end of the right hand of the
Taskbar means your left hand must wait.Never be afraid to ask. This forum has some of the best people in the world to help.
-
I have Windows 7 with 500 GB hard drive, I have 280 GB free hard disk, but when you try Shrink partition I could get space Shrink as 36 GB only. I've defragged and tried as well... Any suggestion to get more space for the partition.
I've hit in this partition for a long time.I have Windows 7 with 500 GB hard drive, I have 280 GB free hard disk, but when you try Shrink partition I could get space Shrink as 36 GB only. I've defragged and tried as well... Any suggestion to get more space for the partition.
I've hit in this partition for a long time.This is due to files not movable, scattered in open spaces. Windows Disk Manager has a few limitations... You can use a thrid party as EaseUS Partition Master Free Edition 9.2.2 freeware utility
Its very easy to use and you can be dragged and resized your drive...
-
I signed up for the 10 free stock images, and when I try to download them, save them to the desktop isn't an option. What should I do? I need to get rid of the tattoo.
Follow the n steps these screenshots: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?
-
How to run dynamic Action when clicking on a link in a report
APEX V4.2.3
DB EA 11.2
APEX listener V2.0.5.287.04.27
13 blue-gray theme
IE9.0.8112
FF26.0
I have classic report and I would like to launch a dynamic action (together a show has confirmed and the value of the alert, submit the page, then run a process) when the user clicks on a link in a report or click on #ID #.
I can write the real actions that I just need to know what to write behind the report link that will serve as a trigger for the DA?
Thanks in advance
PaulP
It's the link attribute
onClick = "if (confirm (' do something for #ENAME # with EMPNO: #EMPNO #'")) {$s('P5_ENAME_CLICKED','#ENAME#') ;};$s('P5_ID_CLICKED','#EMPNO#');doSubmit()""
It's getting a bit long on a single line, if you want, put it in a function
However, fixed, forgotten pair of single quotes as soon as possible.
Now you have 2 bind variables to use in the process of page after submit.
: P5_ENAME_CLICKED and: P5_ID_CLICKED
I've updated the example page, http://apex.oracle.com/pls/apex/f?p=14308:5
Good luck.
Maybe you are looking for
-
I get a new iMac. I have a Macbook Pro for mid-2012. Can I clone my iMac from a backup of the Macbook? I'd like to not have to reinstall all the software from scratch, and I need the iMac have everything that lies on the Macbook.
-
Create a dynamic Variable in LabView (newbie Java developer)
Guys, That's my problem, I'm a java developer & c ++ and was interested in learning about LabView. But also simple as indicated by the site OR it is not as banal that I expect it to be perhaps because of my though process. So what I'm trying to get a
-
Windows restarts to a closed undexpected
I have a HP Pavilion Elite e9200z CTO desktop PC and I totally give up I don't know what the prob is. If I'm trying to watch a video youtube/netflix it will re-start, if im using 2 browsers, it restarts. I cleaned the vents of ventilation and even ta
-
I install Windows XP on a new hardrive unformatted. The installation proceeds without difficulty until I got the message NTLDR is missing and the installation would not be continued. How to install file or fix the problem?
-
How to fix my computer at home with only windows phone
Just how internet on my windows phone. Have a computer at home, but no internet not connected to it. My screen on my computer at home is having a problem. This I just put my USB cable on the front of the computer at home to make it work?