Webcam of light is frequently.

Similar Questions

• Satellite L300D - Webcam error messages

  I am running Vista 32 bit on a Satellite L300D.

  I have recurring problems with built in webcam Chicony. Basically, frequently, it stops working (I only use it with Skype), me gives error messages but more commonly "cannot start video. Try closing other programs that may use your webcam... ». A reboot of my laptop it fixes usually but only temporarily.
  I downloaded the drivers and the software Camera Utility on the Toshiba site, but it has not solved the problem.

  Anyone out there that can suggest a solution, I would be very grateful.

  Thank you.

  Hey,.

  What the webcam driver you have installed, and you removed the old one? You must remove the old driver of the webcam first before installing a newer version. Before installing a newer driver also make sure that all the old driver registry keys are deleted. Therefore, you can use a registry cleaner like CCleaner.

  Compare the driver webcam with a newer version of other laptops. Like Akuma written you can download it from a laptop model more recent and this driver should also work on your model correctly.

  Check this box!

• Webcam says "locked by another application."

  I use my webcam for Skype quite frequently.  However, all of a sudden my webcam will not illuminate.  When I tried to open the "camera assistant software" to see if the camera worked there, he said the camera was "locked by another application" but I don't think I have anything open that would block my webcam.  Is there anything I can try to take my camera works again?

  Hi Lschleef089,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/webcam-not-working-locked-by-another-application/cd2b5869-ae73-4769-9019-de3d90699684

  I hope this helps!

• The G62-361TX notebook webcam does not work.

  Hi all!

  I have a problem with the webcam after installation of operating system Windows 7 Ultimate x 64 charges. It was working fine before with the same OS, Webcam light always ON the beginning of "windows boot.

  I tried to uninstall and update the driver, nothing seems to work.

  Webcam is not detected in Cyberlink Youcam when I opened the application of YouCam webcam (white) light goes OFF, then the LED lights once more when I close the YouCam application .

  Don't know what to do next.

  Help, please!

  SSA

  The problem was faulty Webcam (material). I had solved with the new party in the Service Center HP for free since my laptop is under warranty.

• Problem with Satellite Pro 4200 series USB (4270)

  Hello

  I'm having a problem with my usb port, it doesn't seem to work properly. I did an update of the Bios, which solves nothing. I changed the drivers (Windows 2000 Professional service pack 4) which did nothing either. Plug-and-play does not activate even when I plug something into the usb port. At first I thought that maybe the USB has been damaged, but when I plug my webcam, it lights up briefly, and since it is powered from the usb, I hope this means that the usb port still works. I tried to plug in scanner m, my printer and my camera, with all the different drivers, with which they came. Nothing works. Windows 2000 displays not all conflicts with all the drivers. I've also disabled in BIOS, all other ports (LPT1 COM1 COM2) using the IRQ11. What could be a solution to this problem?

  Hello

  Well, as far as know that the operating system is unable to recognize the devices if the external USB device needs more power than the USB port provides. In this case, the USB devices must have an external power supply.
  In addition, try to remove the USB port on the Device Manager and restart the operating system.
  After the restart of the operating system should recognize the USB ports. Maybe this procedure solves the strange USB problem.

  Please let me know if it works.

  Good bye

• Bubbling gurgle of office

  For a long while now my desktop iMac product a light but frequent or the gurgling. Usually when he treats, but sometimes it just keeps going. It existed long before El Capitan and now with it. The Mac is 5 years, 27 inches. I assumed it was normal, but now I'm not sure. It seems sometimes related to the CMA running slow. Too many browsers? Too many programs? I would like to hear from anyone who knows. As you can guess, I'm not a sophisticated user. Thank you.

  The two most likely causes are due to the fact that they are the only two components with moving parts are.

  1. The computer fan, or a recovery is exhaust or dust etc built into the fan and it affects
  2. The hard drive in the computer starts the same way to wear

  I would say the booking of an appointment in an Apple Store for them to check it out, at the very least, they could open and clean.

  As you should when even make sure that you have a backup of everything, this is particularly important if indeed the hard drive starts to wear.

• Satellite A300-1NO - webcam does not work, but the LED lights

  Hello!

  I have a laptop Satellite A300-1NO, with Win 7 installed. My problem is that my webcam does not work always, when I want to use it. Sometimes, it works perfectly in Skype, WLM etc... but sometimes I see a white or a black screen with a 'loading circle' in there. Blue is the LED light, I can see it in Device Manager too, but there is no picture, just 'loading '. I tried to uninstall the driver and then reinstall it, I installed the new "camera Assistant for Toshiba", without success.

  Is there any solution for this?

  > Is there any solution for this?
  I put t think there is solution for this. If I understand you right there is a problem with software pre-installed. It is not easy to say why this is happening.

  I have Satellite A300 too and use it with Win7 32 bit. Webcam works fine all the time.

  One more thing: have you noticed this problem in the first moments after installing Win7 or later?
  Have you installed something that may be the reason for this?

• Portege R700 webcam goes dark in low light conditions

  Hello

  Since I bought my Toshiba Portege R700 about a year ago I had problems with my webcam. I looked in several forums but couldn't find an answer. My build in webcam has problems of adaptation in the light of the room.

  When the room is dimly lit camera turns almost black after a few seconds. It is interesting enough before the camera darkens, he manages to produce a picture is ok for a few seconds, which means that the camera is capable of producing an image ok in low light conditions.

  She has just problems adjusting the brightness in the room when it is poorly lit. I propose to toshiba update the software of the camera, since it is clearly a matter of software. And yes I've tried every single possible configuration for the camera! And Yes, I also reinstalled (several times) the camera driver.

  I know that the camera performs well in places that have good lighting and so I'm only interested in improving my performance of cameras when not much light is available.

  Thank you very much
  Clem

  Hi dude

  I understand that you would expect webcam great performance in poor light environment but I put t do you think it would be possible to get the good quality photo using the laptop is dark rooms.

  The material of these small internal cams is limited and you see the same issues with other devices like smartphones cameras that resemble the internal cams s notebook.

  In addition, the webcam software that is preinstalled on my laptop Toshiba supports the night mode option that allows you to improve the quality of the obscure image in the Middle but of course you will not get the same image quality if you want to use the cam in the luminous environment

• HP Pavilion laptop g7-1135sd: notification Webcam light

  Hello

  Can someone tell me if there is a connection of hardware or a software connection between construction webcam to a laptop and it is notification LED HP Pavilion g7-1135sd? It is theoretically possible to turn on the webcam the notification LED turned off?

  Best regards, Celia

  Hello @Celia_,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post on the issue of the Webcam and wanted to help you!  I appreciate that you try to disable the light Webcam, while the Webcam is always on.

  I don't think that this is possible for HP products.  However, you can try to review the following resources for more information:

  How to turn off the light of the webcam under Windows (Not a HP website supported).

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Vision: Measure light intensity of webcam

  Hi, I'm trying to measure the intensity of light of LEDs with a webcam to detect whether the light is on or off. I started with a labview example: "Light meter" and tried to change to work with a web cam as input streams. I didn't work at all... What I am doing wrong? I'll post my file and example.

  I want it to work as in the example "light meter". And then decide what range of intensity of light, the light is on or off.

  Everything I did in 'Test 7' is trying to do too much the "data entry" come from a web cam instead of a file. Help, please!

  

  I get this error... In any case I don't really want this feature. I want a return on investment. I got the vi to work.

• Light webcam sur-possible intrusion?

  Earlier, I had a webcam on a vista PC.

  I'm sorry to say, I wasn't short of MSE then, but I was very shortly after.
  I noticed while I was doing some work on the PC, my webcam was carried out and the green light has been showing this.
  Someone could have hacked my laptop and do that?
  Please be as prompt as possible with your reply - thank you for your help.

  See...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/webcam-keeps-turning-on-by-itself/4615bed1-0b60-4043-905F-848bde8a7b0f

• Webcam on Satellite A300 - 1 K 6 is very granular and insensitive to light

  Hi, I just bought a Toshiba Satellite A300 - 1 K 6, and I must say that I am very satisfied with the quality of the webcam. The problem is that there are a lot of "snow storm" - effect on her, in other words, quality is severely affected by small dots of Dervishes (looks a lot like a TV with the poor because of the antenna signals or missing when you use it together with Live Messenger or Skype. When I start the webcam outside these applications, it is much better. Is he really supposed to be like this or can I do something?

  Another thing is that the sensitivity of the camera is very poor when it comes to darkness. In a normal lit room the camera barely detects my face, and I almost put a flashlight on my face so that he could detect it. Then all of a sudden the camera becomes more sensitive. This is due to a kind of fashion night? Why does this happen?

  I hope someone can help me, because this is getting boring.

  Thanks for your replies

  Have you removed the transparent sticker covering the camera?

• I get a message does not detect webcam, but the green light on start up

  I GET A MESSAGE THAT NO. WEBCAM IS WHEN I PLUG IN MY CAMERA I GET SAME MESSAGE

  Hello

  ·        What operating system is installed on your computer?

  ·        You did changes to the computer before the show?

  Method 1: run the corner hardware store and devices and check to see if that fixes the problem:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Reset the USB controller and check if it makes a difference:

  (a) type devmgmt.msc in the start search box.

  (b) expand Bus USB controllers.

  (c) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  (d) restart the computer and reinstall the USB controllers.

  (e) connect the removable USB storage device and perform a test to ensure that the problem is solved.

• XB270HU light I have tasks "frequented".

  Hello world.

  I just bought this screen last week. And overall, I am very satisfied.
  However... Over the weekend, I'v noticed a small area, where there are pixels are "lighter", but not all the time.

  

  

  

  I tried to find a boss and discovered that area light appeared after playing some BOA in Metal Gear Solid V.
  And I also noticed that it is right where is the more 'busy' millisecond counter part.

  Here you can see how busy.
  https://youtu.be/f5Z8jjxhBb0

  Is not visible on a white or black background. And if cutting the power (pull the power cord) for the monitor for 30 seconds and turn it back on. It's still there.
  After 5 min - 10 min. from the bland area back to normal.

  Everyone recognizes this problem?

  -Christian

  Yes, I think that's what I said, a few pixels that are slow to change color.

  Honestly I contact your seller or the Acer support for an Exchange or repair service.

• How can I turn off light on webcam?

  Original title: Web camera

  I don't know HOW to disable the clear blue webcam on top of my laptop.

  Hello

   

  1. What is the number of brand and model of your laptop?

  2. who is the application that you used to open the webcam?

  Open the application that you use to open the webcam, one of the options, select leave. Check if the led on the web camera is disabled or not.

  It will be great if you will give us more details about your laptop, so that we can help you best.

  You can check this link: use a webcam to bring your Instant Messaging to life

  http://Windows.Microsoft.com/en-us/Windows7/seeing-is-believing-use-a-webcam-to-bring-your-Instant-Messaging-to-life

  I hope this helps!