Light webcam sur-possible intrusion?

Similar Questions

• Firewall problem possible intrusion via CFMAIL

  I'm new to coldfusion - please speak slowly. I have CF mx 7 std on Windows 2003 with IIS 6 - and excahange std STD 2003 all on the same box. I am trying to send e-mails using intrusion via cfmail, and I am sure that the code is correct - the query is also very good (checked with cfdump). But here's the problem - the email goes to several addresses, some internal (using the name of the full address) and some external i.e. [email protected]. My internal users receive the external email are not. I have a device astaro firewall. Any suggestions welcome - how trouble shoot if it is the CF Exchange or my firewall.
  
  Thanks for the help.

  I thought about it - and shameful never asked. Incase someone else is there, but has the same amount of brain, I did... Here's what I did (I hate to find the question I'm looking for just to see a message saying "too bad", I would like to post the same answer to my own stupid questions)

  Once I saw the msg of error in CFmX - it did not take long for fix - took me more time to put in place an external account to test. On your box Exchange - Exchange System manager - expand your virtual server (points to a cold fusion) - develop protocols (this may be different depending on whether you have an administrative view running)-expand properties click on SMTP - then right click on the SMTP virtual server by default.

  In the Access tab - click on relay - add IP to authorized computers. Note: allow all computers to relay authenicate... check - if this box is checked or not - you must always have the IP address, even if coldfusion is the same square - successfully added to computers permit.

  At least it fixed it for me.

• BlackBerry smartphone red light - no departure possible

  After an update of Blackberry Desktop Manager my firmware release taken should be also updated.

  During this update, I had a problem. The update has been stored up to the old configuration while crashing. Now, I want to restart my letting go, but there only a flashing red led.

  It is not possible to start the handle.

  Who can help?

  person I have the same problem.

• light webcam HP pavilion g6 said

  Yesterday, I noticed that the led next to the webcam on my hp pavilion g6 remains. I don't remember ever stay on like this before. Is this normal? How do I turn it off?

  Go to Device Manager. > Imaging devices > uninstall the webcam Driver > restart the PC.

  Also please update the BIOS of the laptop.

• HP Pavilion laptop g7-1135sd: notification Webcam light

  Hello

  Can someone tell me if there is a connection of hardware or a software connection between construction webcam to a laptop and it is notification LED HP Pavilion g7-1135sd? It is theoretically possible to turn on the webcam the notification LED turned off?

  Best regards, Celia

  Hello @Celia_,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post on the issue of the Webcam and wanted to help you!  I appreciate that you try to disable the light Webcam, while the Webcam is always on.

  I don't think that this is possible for HP products.  However, you can try to review the following resources for more information:

  How to turn off the light of the webcam under Windows (Not a HP website supported).

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• uninstalled my built-in webcam hard wear

  My obtained material wing not unhooked my computer for my built-in webcam is possible for me to be able to reinstall?

  What do you mean by 'uninstalled '?

  Normally, if you just restart your computer, Windows will find and automatically reinstall

• Workflow: lighting, After Effects and Cinema 4 d

  Hello

  I wonder what is the best "workflow" to a project with 3D and 2D elements that I am planing to do this.

  Lighting will be a crucial element of narration (there is a scene with many tasks projector etc.).

  I prefer to get the Department 3D 3D elements, throw in AE (CC2014) and do the lighting for everything in there. I discovered that it is quite easy to load projects C4D in AE. But I was unable to receive the light. Is there something I'm missing or is it just not possible? And if it's possible: that would make sense?

  Or would it be better to make the lighting in C4D and import there AE lights? (if possible, I have not yet tested)

  Or maybe think of a tool of real composition such as Fusion or Nuke?

  Thanks for your help!

  Best regards

  Martin

  AE lights do not interact with the C4D scene lights in Cineware and that's that. If you want this kind of functionality, you need 3-d element, but there are still limits. The rest is pretty much a buzz - ho matter. Cineware is much too crumbly and in current versions there are issues by extracting scene data and keep everything aligned, so you could be trading in a bad workflow for another. Similarly, export OBJ and FBX in Cinema 4 d simply suck, then get your 3D files into Nuke or Fusion will be a pain. Overall, it would be best to do everything in C4D and fix things upwards as new rendered necessary, as everything else will just be a pain in the rear and cost more time and patience.

  Mylenium

• Exports RAW to JPG lighter they appear in the library

  Hello

  I'm new to the world of photography and have a bit of trouble when using Lightroom.

  I have a new Olympus PEN EPL-5 and Lightroom 4.3 running on Windows 7.

  When I import of the FIRST (.) ORF files) they are dark in general, but when export to JPG format, they are more light, similar to what looks like native JPG of the device.  So if I 'fix' the ORF file in quick develop or develop, it becomes too light/bright/sur-exposée.

  Let me show you what I mean.  Here on the left is file import RAW with parameters develop = 'none' and on the right is an export to jpg "sRGB" color space

  

  Now, if I adjust the RAW format (.) ORF) file in LR, I can get it close to the JPG format to the right above, but when I export, it becomes way too bright

  

  Does anyone have any ideas why the RAW library image is so far off the coast of the exported JPG image?

  This 'problem' of course makes use Lightroom very difficult because I can't tell how the changes in LR will truly turn once exported.

  I'm open to any ideas on how to correct this problem.

  Thank you

  D

  You have a bad monitor profile. It affects Lightroom, but not Picasa Photo Viewer that is not color managed and just ignores the monitor profile.

  The immediate way to deal with to define the generic sRGB as your monitor profile. Go to control panel > color management > Devices tab. It looks like this:

  

  If sRGB is not already in the list, click "Add." and scroll down until you see. Full name sRGB IEC 61966 - 2.1.

  The right way to fix it is to calibrate the monitor.

• Satellite A60 and energy saving issues

  Hello

  I am facing a problem that drives me crazy. After I formatted my laptop and install Windows XP, I'm never able to install Toshiba Power Saver or any kind of Toshiba Utilities. Setup turns on, but after that, it displays an error message (sometimes just sound no message) and it stops.

  To be more precise:

  I use a Satellite A60-302, with extra addition of 256 MB of RAM. I formatted the C: partition and installed Windows XP Professional (I tried 3 different versions: right XP, XP with integrated SP1, XP with SP2 integrated; just to be sure if the problem was caused by service packs). Then I inserted the CD provided, put in place the ATI card, etc. its pilots respecting order but when it comes to saving energy, the nightmare starts.

  I removed the RAM I added and tried the whole installation by the original Setup process, but no change... My hard drives are well checked for any kind of virus, and the installation process was done with the ethernet cable connected to offshore to prevent any possible intrusion.

  Funny, I remember setting up Win XP Pro on this machine before 3 months no problem at all. The only significant change since that day is the update of the BIOS from 1.60 to 1.80.

  Looks like a "common modules" error but it is not "common modules", on the CD or on the internet.

  Finally, I must say that I can't use my recovery CD because it's Windows XP Home Edition in Turkish, but I use Windows XP Professional English provided by my employer.

  Any help? I'll be delightened if someone could help me.

  Post edited by: sunfury

  Hi sunfury,.

  I imagine you're nettled. But there must be a solution to your problem.

  You are right. There is no common Modules for this machine. Usually the common Modules, all Toshiba tools depend on. It is the main module.

  In your case, it is very important to use a specific order of installation. Normally, you must use the order of Installation set by Toshiba. You can find it on
  http://support.toshiba-tro.de/tools/satellite/SA60/win-XP/install_xp_na_en.zip.

  But there is also another solution. I usually install on this path:
  -OS
  -chipset + display driver
  -audio driver
  -fix for... (all)
  -one other drivers (modem, LAN etc..)

  When you want to install the tools of Toshiba try in this order:
  -Power Sawer
  -Init GST
  -TOSHIBA Hotkey Utility
  -TOSHIBA Hotkey Utility for display
  -Other utilities
  -TOSHIBA Console

  If you want to install SP2, maybe it will be better to do it later. It is also possible that some of the tools after installation of SP2 will not function properly.
  http://support.toshiba-tro.de/Tools/updates/Windows-XP-SP2/mwxpsp2ui-XP-11.zip

  If you still have problems made me know.

  Good luck!

• Qosmio F50-111: control buttons stopped working using VMWARE Workstation

  Hello

  Since I've installed VMWARE Workstation v6.0.3, my touch buttons (play, pause, stop, media library, next, previous, updated muted and light webcam and dolby) stopped working.

  So I chose Restore my Vista before installing on my VMWARE of ve. It works again my buttons work...

  BUT I need to install this software (vmware) for my use of employment.

  I've tried remove and install then new value-added Package from Toshiba Web site, but it does not work.

  Please help me

  This means that applications (in TBS folder, such as TDspBtn.exe, TBSbtnSt.exe,...) start running, but stops immediately.

  Thank you for coming to help

  Here the solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=181231

  + After the installation of vmware workstation 6.x or 7 - the default setting is "Disable Autorun on the host". (you can find it in: Edit-> preferences-> devices). +
  + Clear hook and restart. After the reboot, the buttons should be working. +

• Improve the Camileo S10

  I bought last year a Camileo S10.

  There are two not good question.
  Light sensitivity: with plain day I work well, but with the clear desk light or unclear orrible. is it possible to upgrade?

  Optics: it is quite a narrow profile. Is there a possibility of change in a broad vision.

  Hello

  > Slight senility: ordinary day turns I work well, but with the office light or unclear orrible. is it possible to upgrade? Light of senility: with plain day I work well, but with light light desktop or little horrible light. is it possible to upgrade?

  Unfortunately, there is no upgrade to improve the sensitivity to light.

  But I must say that it is not a question of camcorder I put t know camcorders how much you had in the past or if you have experience in the use of these camcorders but fact is that all of the camcorders in this price range would produce excellent images in a bright environment. But you'll notice a kind of noise in dark rooms or the environment.

  If you want to get better picture in theaters, then you need to buy camcorders in the range of price superior > $700, but you still won't get the same quality as using the camcorder in a bright environment. So I don't know if the rise in prices would be furious if you do not use these cameras for profesional use...

  I have a S30 and it's good enough for holiday movies...

  Welcome them

• Satellite A210-183 has error message "FAILED to RENDER GRAPH"

  Hello

  I recently bought a Satellite A210-183 with an AMD processor Turion 64 X 2, 2 GB of memory, ATI X 1200 graphics card 1.3 build in webcam and possibly other features.

  After 1 day use and that I had tried all the features and worked normally, when I tried to open my webcam, I got the message "FAILED to RENDER GRAPH"...

  I restart the laptop and once worked normally and other time showed the same message. I decided to return the labtop back to the store to change because there's a term in this store that modify the machine within 7 days after purchase.

  Certainly, the shop change the labtop with a new one. When I started again some of my programs installed on the labtop such as (msn & yahoo messenger, Nero, office, Sony ericsson Pc Suite and other programs of 1-2 and I had already tried to use the webcam and worked normally) after some restarts, I get the same message when I try to open the webcam... "" FAILED TO CHART RENDERING.

  Everybody knows why I received this message and I can not open the webcam? I get on crazy and I do not think that the problem comes from the labtop. Perhaps something else like a program operating...

  Please someone with something similar helps me.

  Thanks in advance

  It seems that this problem could be linked to the issue of software.
  Try to update the graphics driver and the driver for the webcam.

  Notes; you need to remove the old drivers before you install the new version.

  By the way; If you have problems using the webcam with the MS Messenger then check out this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=102403

  Greetings and dude good luck

• Buy set lcd cursor.

  My wife has poured a little water on his Droid and he went into the hole in the ear speaker. The phone starts fine, but the capacitive screen and light are non-functional. We can see the boot because the lcd panel doesn't work, just light. is it possible to buy the whole of lcd slider the phone somewhere? It would be fun to have this awesome phone and liked in working condition when it gets retired for the RAZR in a month or two.

  Even Amazon has these. I was surprised by that. If you do a Google search you can find them anywhere. Click the link for the results I got. I hope this helps.

• Satellite L300-1BV and fatal issues with WXP

  Hi guys -.

  Very well. My Toshiba Satellite L300-1bv, loaded with a copy of Windows XP SP3 home edition, started having glitches and slowing down questions that grew progressively until it would completely freeze after a random interval of time. Try to boot now returns a missing hal.dll error.

  I'm almost certain, given the characteristics of this that the hard drive is a failure, mainly because he began to thrash continually without reason a few months in him. On the other hand, it could be a mistake of memory through Google diagnostics.

  I ve managed to install a copy of Windows XP Home SP1 edition on a new partition (the one broken leaving intact), but I don't know how long it will continue to operate in light of a possible hardware failure so I don't want to commit.

  Any help would be massively appreciated.

  Hello

  What assistance do you have exactly?

  As you say the problem could be related to a hardware (RAM, HARD disk problem) or software (missing hal.dll, corruption of the operating system) problem

  If new OS installation (with all patches, service pack) no did not help, then a problem of material is possible in this case, replace defective parts
  No one can say what part could be corrupted it s is necessary to test means that the RAM or HARD drive needs to be replaced and then you could test how it works

  PS: there is a nice tool to drive HARD HDD Fitness called diagnosis test for google's free simply

• W530 - no wireless connection

  Windows 7-64 bit. 37 of Firefox; NETGEAR dual access (without wireless and ethernet); 3 computer network more wireless printer. All devices work fine, except my W530. He used to work fine before, but I mainly use ethernet connections and I can't identify the exact time when Wi - Fi stopped working on this laptop in particular.

  I ran all the tests provided by Lenovo Solution Center and hardware and all checks this past. I checked these forums and the internet, but I still couldn't find something that worked. I understand that even under warranty Lenovo may not inclined to get involved in something that is most likely related to the software. Even my attempts to export the settings of the profile of another laptop could not be completed. A pop-up message would be to end on corrupted files or anything of the sort. But the files are working on other devices...

  So, before I head to a clinic of the computer, I hope that someone experienced in the network and connections settings can provide a solution or at least some light on the possible causes underlying this question.

  Any ideas, please?

  Edited to add logins to Lenovo shows connected and icon with a 99% signal strength.