Webutil very slow copy

Similar Questions

• Satellite U500 - copy process is very slow

  Hi friends,

  I use the Satellite U500-1f5, for the last 2 months. It's core i5 with Windows 7. The copy process is still very slow and sometimes starting is a bit slower.

  Can someone show a valid answer for this problem?

  Hey mate,

  Looks like you have installed lots of software that slows down the performance of your laptop.
  If the programs you have installed?

  Theoretically it could also be caused due to a virus or a trojan. You should check your laptop computer for viruses using a good antivirus like AntiVir program.

  Try to defragment the HARD drive. If you install/uninstall programs, you should defragment the HARD drive from time to time. You can use the built-in Windows defragmentation tool.

• very slow file read/copy of WinXP to Win7

  I have two PCs, it is WInXP, one is Win7.  On Win7, I produce read/copy of WinXP to Win7, it is very slow, about 10% of the 100 Mbps network (as indicated by the Task Manager and the status of file copy).  However, if I do the copy of file for WinXP to Win7, it is very fast, about 90% of the 100 Mbps.

  It is using windows file sharing.

  Why is this?

  Please note that all operations are done on the Win7 PC, I have not tried to do it on PC WinXP again.  There are a few problems with Windows XP, access to the share on the Win7 PC (which can access any other PC Win7).  But it is not so important.

  I do regular files between WinXP PC at work, they are typically 50% of 100 Mbps.

  Thank you.

  Hello

  Please take a look at this thread that deals with what seems to be an ongoing problem that topic exactly. http://social.technet.Microsoft.com/forums/en/w7itproperf/thread/c723939a-c917-486A-a57c-83d0f76dfc49

• In Excel 2007, copy the conditional formatting cells is very slow

  I've just upgraded to Excel 2007 (SP 2) since 2000 in the hope that it would be faster.  I have a large spreadsheet consisting of a database of about 5000 lines and a number of leaves each grids showing cells of 7 x 7 with conditional formatting in each cell.
  In 2000, I had to stop automatic recalculation.  In 2007, the recalculation is much faster, but when I created a piece of copy and past cells 7 x 7 with their conditional formatting, it is very slow and eventually is short-term memory.
  I am running XP service pack 3 on processor 1.6 ghz with 1.9 GB of ram.
  Any suggestions?

  Hello bailes2,

  Thanks for posting on the Microsoft answers Forum.

  The question you have posted is linked to Excel 2007 and would be better suited to the office community.
  Please visit the link here to find a community that will provide the support ask you

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Very slow server file transfer client

  Hello

  I am currently using application 6i and even I am converted forms 11g. However, I found that the transfer of files from Client to server weblogic is very slow. My 6i application takes 20 seconds for all 5 mb upload while 11g takes 40sec to copy a file to server weblogic only FTP get and finally download beginning so full download completed around more than 1 minute.

  Download same front end are little slow

  Can anyone guide on this

  Thanks in advance

  Vishal

  
  

  How you export your file on the application server? with webutil? also that

  My 6i application takes 20 seconds for all 5 mb upload while 11g takes 40sec to copy a file to server weblogic only FTP get and finally download beginning so full download completed around more than 1 minute.

  What has the FTP to do with it?

  see you soon

• manipulation of file/folder Win 8.1Thunderbird very slow

  Long story short: Win 7 has been corrupted, so I installed Win 8.1. All programs work well, with the exception of Thunderbird. Any action of Thunderbird is extremely slow, up to a few minutes to perform any action. The program is unusable in normal windows mode. However,.

  Thunderbird works fine in safe mode, even with the antivirus software (Iolo / System Mechanic) currently running.

  A cause may be that any action I take with files bigger than a few bytes of Thunderbird is very slow. Copy, move, delete all the files of Thunderbird is extremely slow. I tried to copy other big files and folders in the T-bird folders and delete them, and they work fine. It's just the Thunderbird files that seem to be stuck in the glue.

  I added Thunderbird to my allowed firewall programs, so this is not it.

  I uninstalled and reinstalled Thunderbird, nothing helps.

  There may be other things that you must disable in System Mechanic, such as analysis of messages incoming and outgoing and scanning of attachments.
  Alternatively, you can ask in a forum for System Mechanic.

• 2011 27 "iMac running very slow - please help

  Hello, I know it's an old computer, but it makes no sense as to why it is slow. When I got it, it was fast as lightning, now he struggles to keep Chrome and Photoshop open at the same time. I have reset the PRAM and SMC a couple of times, no results. The fans do not run particularly fast, and it's never really too hot. It's very slow start as well, and most of the time that I hesitate to open anything at startup for 5-10 minutes for fear of this gel horribly.

  OS X Yosemite

  10.10.5 version

  iMac (27 inch, mid 2011)

  Processor Intel Core i5 at 2.7 GHz

  4 GB 1333 MHz DDR3 memory

  AMD Radeon HD 6770 M 512 MB graphics card

  I'm free to Go 602,21 Go 999,35. Is not as if he reaches its peak to storage, and it's not as if it was a bad computer. Checked for anti-virus, so nothing has jumped to the top. Love insight as to why this iMac has become a potato.

  Thank you

  scripttion

  Please download and run a report of EtreCheck and then copy and paste the results into your answer.

  https://etrecheck.com

  That should reveal the reason why your Mac is slowing down.

  Otherwise, it's just a guessing game.

  Personal data is shared in the report

  One thing you can try since it is slow to start. Open System Preferences > users and groups > login items. Delete a connection point at the time, and then restart your Mac to test.

• Satellite L855-14R: games running very slow after installing Win 7

  Hi guys,.

  I have the L855-14R satellite, which came with windows pre-installed 8.

  I used win 8 during a time and games have been works ok.
  So I decided to install a copy of windows 7 ultimate 64-bit.

  I downloaded all the drivers from toshiba support and it seems to work fine until I started the same game I played before.

  He was running very very slow even on low graphics settings.

  No idea of what went wrong after the win 7 installation?

  Have Hmm you installed the driver of ATI graphics card?
  Maybe the game uses the Intel HD internal graphic that is part of the Intel Core i7-3630QM processor?

• Very slow Satellite Pro A100

  Has just been given a Toshiba Satellite Pro A100 computer laptop and it works very very slow.

  When no programs are running, the Task Manager process tab indicates that the laptop is about 95% idle, but the performance tab around 50% or more.

  I ran anti-virus, cleaned a lot of software that I use, XP (service pack 3) update and different drivers, but it works still slow.

  I guess I have to re - install XP, but unfortunately I don't have a copy the disk recovery product that came with the laptop.

  Anyone know if I will be able to get your hands on a copy of this disc.
  If it helps, I have two drives available for other XP laptops that I own, but I don't think I'll be able to use them to reinstall this copy of XP using the label of serial number 25-digit number based on the laptop.

  Hello!

  It is possible that it s a software problem, but it might be the case.
  What antivirus or security software internet you use? Have you tried to install another, for example AntiVir?
  In addition, you can do many things to improve performance. Defragment the HARD disk, disable startup programs, clean the registry for example and to this day. Google will help you learn more.

  Finally and above all it is possible to order a recovery disc. So, contact the nearest authorized service provider in your country.

  Good bye

• Satellite M45-S169 is very slow

  Hello

  I really hope that someone can give me a notice here...
  Recently, my laptop started to work very slowly. I was using Windows Movie Maker to create projects and she began to hang and not save the project... The use of the CP was 100% and the system ran out of memory quickly... Files with avi, wma, jpg files did not open at all and windows Explorer hanging just whenever I tried to open a. He had more than 20 GB of free space on system C drive and about 8 GB of local disk D... In addition, the copy process has just stopped working properly... It took a long time to copy even small files from one place to another... I am not connected to the network, so this isn't the issue...

  I have reinstalled the operating system (Windows XP SP2)... Files with extensions of different media now open... Although not very quickly. But the copy process takes much longer to finish... It is also very slow browsing photos with Windows picture and Fax Viewer.

  If sth wrong with the material from the laptop or the absence of some drivers could cause problems? What and how can I check this? I've had this laptop for 2 years now...
  I'm not very good with PC equipment and do not know what might not work... I greatly appreciate your help... Really need help here...

  Thank you very much

  Hello

  I found two forum threads useful on HDD repair tools:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=33738菊
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=69562𐾺

  Maybe it s an option for you

• DeskJet 2544: hp deskjet 2544 suddenly prints very slow but quickly copies

  I have had this printer for about 6 months.  Things were very good.  Recently, it started very slow printing.  I read it could be weak cartridges so even if they had both ink, I replaced the.  I have nothing but HP used since the beginning. I noticed that she copy quickly, but print very, very slowly.  Any suggestions? It has been connected wireless but I stopped that and we hung usb thinking that was the issue.  But no. I should add it is connected to a Dell AIO

  Hello @sues2015!

  Thanks for posting on the HP Forums!

  I should be able to provide suggestions!  I can see that over time your printer running slowly when printing from the computer wireless or USB connected.  If the printer is capable of performing a photo copy at normal speeds and then indicating that the equipment is working correctly and you are probably looking to a software problem in the computer.  Also if the printer is having the same problem USB or wireless connected pointing more fingers to the software.

  The first thing I recommend is to uninstall the HP software. Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.
  
  To uninstall the HP software, click here: uninstall the HP software
  
  To perform a disk cleanup, click here: perform a disk cleanup
  
  To download the HP software, click here: HP Deskjet 2540 all-in-One Printer series full feature software and drivers

  If please, after back and let me know how everything goes.

• Very slow email from El Capitan

  Apple Mail has become very slow since upgrade to El Capitan.
  When I click on a message that takes seconds to show.
  What can I do?

  This will be fixed?

  What other email application can I use?

  Please leave Mail runs. This procedure has no effect unless you leave Mail when you start.

  Back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  sqlite3 L*/C*/*.mail/*/L*/*/*/C*.db vacuum; sqlite3 L*/M*/*/*/E*ex vacuum

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal (command-V).

  You should see a new line ending with a dollar sign ($) below what you entered. If this is not the case, press return. You can then quit Terminal and relaunch Mail. Test.

• Satellite L505-144 - flash memory transfer speed is very slow 1.45 Mbps

  Hello

  I have a Satellite L505-144 and installed the system Win 7 64-bit *.
  The problem is when I move or copy DATA using Flash memory, transfer speed is very slow 1.45 MB/second and I try the same memory Flash on another PC its work too quickly it move 22 MB per second

  What is the problem?

  Hello

  What is the status of the SATA mode in the BIOS?
  It must be set to AHCI.
  If it s set to compatible, then the SATA benefits can not be used
  Check it!

• end of 2013 iMac 21.5 very slow

  Hi my iMac is very slow to start and may take up to 4 or 5 minutes to open Photoshop after turning on the computer, anyone any idea?

  end of 2013 8 GB of ram, 2.7 GHZ intel Core i5, Intel Graphics pro iris.

  Please post a report of EtreCheck of your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

• Download of El Capitan post - my computer is very slow. Help.

  I have a Mac Mini mid 2011

  2.3 Ghz

  8Gb

  Recently, I downloaded El Capitan...

  Now my computer is very slow - trudging-

  Have seen several Beach - unprecedented balls - in my life.

  Have been read the tips of Apple Support Mess - you are looking for a simple solution.

  I have baby steps and delete cookies... organized files and photos...

  Nothing helps.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.