WebWorks and Cordova requires a specific Configuration

Similar Questions

• Question about the roadmap WebWorks and Cordova

  Hi, in the WebWorks Raodmap [1] is the following statement:

  In order to make the promise of HTML5 cross-platform development even more real, we will be leveraging the Apache Cordova open source project as the heart of the WebWorks SDK for BlackBerry 10. This will allow BlackBerry web developers to more seamlessly leverage a much wider array of tools and frameworks being built around the "center of gravity" for mobile web applications.
  

  What exactly is? Cordova will replace the Webworks API?

  [1] https://developer.blackberry.com/html5/downloads/roadmap/

  "To make the promise of cross-platform HTML5 development even more real, we will be relying on the open source Apache Cordova project as the heart of the WebWorks SDK for BlackBerry 10. This will allow BlackBerry web developers to more easily exploit a range much more wide tools and frameworks under construction around the 'centre of gravity' for mobile web applications. »

  We'll disect this declaration and I'll add what I can:

  'we will be relying on the open source Apache Cordova project as the heart of the WebWorks SDK for BlackBerry 10' - this means you can think of the future of WebWorks BB10 as being "built" on top of Cordova. So our API and support for the creation of webviews etc. will be built above the standards defined in the project of Cordova.

  "This will allow BlackBerry web developers to more easily exploit a range much more wide tools and frameworks under construction around the 'centre of gravity' for applications web mobile."-there are currently groups creation tools to work on top of Cordoba; Maybe your favorite editor has already Cordova or PhoneGap support. This will mean that you can use in your development BB10, without worrying about the specific tools BB only.

  At the end of this process should in theory be easier to work with WebWorks.

• WebWorks and cordova (phonegap) api

  Wonder if use api cordova replacing api webworks is Ok?

  Is there a difference in performance?

  The performance should be the same.

  For example, if you use PhoneGap to access the camera, it's the real device camera that is loaded with our own API.  Performance should be the same as if you use PhoneGap and used the BlackBerry API to do.

• What is the correct process for the construction of webworks + apps cordova with ripple?

  Hello, I'm developing an application targeting os6 and 7 devices using phonegap and tests through the emulator to ripple. The emulator seems to be missing the package for blackberry in cordova apache mode option. Switching mode webworks brings up the option. However, the deviceready event that cordova expects is not raised in this mode. Therefore, do not start apps according to the deviceready event.

  Is there something that I am missing?

  WebWorks and Cordova are two separate web platforms.

  WebWorks mode, you will be able to imitate WebWorks APIs belay the WebWorks SDK to your content of HTML5 (sign) package in a BlackBerry application.

  In Cordova mode, you will be able to emulate the Cordova APIs (including the deviceready), however there is no integration with the Cordova SDK for real packaging process. You will need to follow the documentation of Cordova for packaging and signing.
  http://Cordova.Apache.org/docs/en/3.1.0/guide_platforms_index.MD.html#platform%20Guides

• disk memory and space requirment for development database

  Hi all
  
  I want to know the disk space and memory required for the configuration of the environment development database.
  
  Production database size is max 25 to 30 concerts
  and only 3 user will use this database
  
  on this info my suggesion is to go with 3 GB memory 60 GB of backup space and archivelog. Let me know experts comment on that

  xuv500 wrote:

  I want to know the disk space and memory required for the configuration of the environment development database.

  Production database size is max 25 to 30 concerts
  and only 3 user will use this database

  on this info my suggesion is to go with 3 GB memory 60 GB of backup space and archivelog. Let me know experts comment on that

  How long lasts this string? ++

  So, in other words - it depends. Development environment might include a database logic dev (containing data from prod), one database Q & A logic (to test changes in dev) and a complete copy of the prod database logic (to test the final deployment).

  It could contain an R & D environment - where all data from prod is necessary for data mining research and then to deploy processes of extraction of useful data in the production.

  It could be used in a number of ways - and some of them will be more intensive in the transformation and requiring more data, than the production.

  Ideally - dev environment should look like as close as possible to the prod environment. Ideally, that means a server hardware and similar size, same o/s and Oracle versions and same volumes of data.

• Configuration of the invalid OSB: factory connections is Non - XA and "XA-Required.

  Dear Experts,
  
  Receive the following error message on the Oracle Service Bus on an ongoing basis: "invalid configuration: connection factory is Non - XA and"XA-Required"property is true.» My scenario is the following:
  
  Trying to activate a session in Oracle Service Bus, the session I've marked the field "XA required is" in the "change a Proxy Service-> advanced settings" section in my proxy service works as a recovery tool on the JMS Protocol in queue. I scored "XA Connection Factory Enabled" on my connection factory.
  
  After many attempts I have not found the right configuration. What should I study?
  
  
  Kind regards
  Mike
  
  Edited by: 26 Mike.Di / / gen-2011 9.16
  
  Edited by: 26 Mike.Di / / gen-2011 10.18

  I scored "XA Connection Factory Enabled" on my connection factory.

  You have rebooted servers after you enable XA on your factory connections? If not, then do it.

  Kind regards
  Anuj

• Simulators require a specific JRE?

  Hello

  Simulators require a specific JRE? Where can I get a list with Simulator and required JRE version?

  Hendre

  Responded to your other Thread in the same direction.  Given that the issues are the same, let's stick to that Thread and you can close it.  For problem-solving instructions are included in the link help located at the top of your screen.

  http://supportforums.BlackBerry.com/T5/Java-development/configure-Simulator-to-run-using-a-specific-...

• 1.2 of the ISE and iPEP required certificates

  Hello

  For version 1.1.x of ISE, there are a few constraints on the certificates used for iPEP and Admin:

  Both EKU attributes must be disabled, if the two attributes, EKU are disabled in the certificate of Inline Posture, or the two attributes, EKU must be activated, if the server attribute is enabled in the certificate Postur Inline.

  • [http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bea904.shtml]
  • The same applies for iPEP ISE 1.2? For ISE 1.2 User Guide and Setup Guide material does not mention anything about EKU and the attributes of specific certificate...
  • Any thoughts?
  • Thank you
  • Octavian

  Validation of EKU has been removed in version 1.2

  "If you configure ISE for services like Inline Policy Enforcement Point (iPEP), the model used to generate the ISE server identity certificate must contain attributes to authenticate client and server if you use ISE Version 1.1.x or earlier." This allows the admin and inline nodes to mutually authenticate each other. The validation of the EKU for iPEP was removed in ISE Version 1.2, which makes this less relevant requirement. »

  Source:

  http://www.Cisco.com/en/us/products/ps11640/products_tech_note09186a0080bff108.shtml

• Tecra A8: external keyboard connected to the serial port: the necessary specific configurations?

  Hello
  I want to share a monitor and an external keyboard with Tecra A8 and a desktop computer. To do this, I bought a switch 2-port Linksys where I plugged the external monitor and a keyboard. With the monitor without problem because there is a specific port for this. However my Tecra has only 3 USB ports and a serial port 6-pin where I connected (with a 6-pin Mini DIN adapter) on the keyboard. When I turn on the screen it's ok, but the keyboard (I also tried a mouse) does not work. Do I need a specific configuration on the serial port to accept the external keyboard? If so, what commands do I need on the XP operating system?
  Thank you
  Luis

  RGB (monitor) port used to connect the external monitor.
  If you want to connect the external keyboard, you have to use the USB ports.
  Additional legacy USB emulation must be enabled for the keyboard.
  These settings you can change in the Toshiba HWSetup under control panel.

  If you connect multiple devices to the switch USB (hub) Please be sure that the USB hub using external power.
  A low power USB could be a reason for the external USB device failure.

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• Specific configurations to the access point

  Hi all

  just a matter of an inch...

  If I had a scenario 2 controller with some specific Configurations of the AP, for example AP groups VLAN and a faulty controller, the APs move to the other controller. What the specific config? Assume that the controller configuration (dyn Interfaces lets say) is correct.

  Any hint of welcome

  BR, Michael

  But, do i have to connect and configure every AP to all Controllers in my Netwok and configure the same steps?
  

  If you have more than one controller, you can copy the config of a fully functional config to the new (just change the IP address).  You can also set global one are the primary and the secondary controller.

• Impossible to click on "define and save as my Active Configuration for this project '"

  Environment: OWB 11.1.0.6 Client running on Windows XP Pro SP3 repository and targets on AIX (IBM UNIX).
  
  I have created a new Configuration under a specific project and I would like to make this configuration by default whenever I have connection and select this project.
  
  There is a checkbox when I click with the right button on the Configuration and select "Open the editor" that says "set and save as my Active Configuration for this project ' but when I select the check box and try clicking on 'OK' there is no response from the popup window and I have to click 'Cancel' to exit the popup."
  
  Any ideas on why this is happening and how to work around?
  
  Thank you very much.
  
  -gary

  Try restarting the Client OWB.

  Try right-clicking on the configuration in the Solution Explorer, then choose "Set Active Configuration".

  See you soon
  If

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• Air iPad with iOS 9.2.1 in 'Settings' under the Safari icon HomeKit icon does not exist (and is not possible to configure HomeKit)

  Hello:

  I have iOS 3 devices: iPhone 6, iPhone 5, iPad Air all with the latest iOS 9.2.1.

  I bought a Netatmo Thermostat, with the HomeKit technology.

  In the iPhone 6 there in 'Settings' under the Safari icon HomeKit (configure) icon.  BUT in the iPhone 5 and iPad Air does not exist the HomeKit icon (and it is impossible to configure HomeKit and link the Thermostat).

  Tank you for help me!

  In the article below, it seems confugure Homekit first by downloading the app from the manufacturer.

  Use the HomeKit accessories compatible with your iPhone, iPad and iPod touch - Apple Support

• When I try to access utility 'defrag' from Microsoft, a link to "Diskeeper" is everything that happens with download and purchase required.

  When I try to access utility 'defrag' from Microsoft, a link to "Diskeeper" is everything that happens with download and purchase required.  What is an intrusion to avoid?  It is possible to access the Microsoft defrag utility?

  Glen, have you ever tried to download Diskeeper?

  If so, he may have added something on your computer for access to defragment.

  You're going to start > all programs > Accessories > system tools > Disk Defragmenter and obtaining the pop-up window?

  Check in Add/Remove programs and see if something diskeeper is installed then uninstall it.

  Post back with more information, make and model of the pc, current anti-virus, browser and operating system and the service pack.

  also:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  After back with the results.