Weight 15 t-j100 in 15-j171nr, why 4.8 vs. 5.6 lb

Similar Questions

• Help please - why is noon suddenly registered double on the same track (instances on several tracks)?

  Hello everyone, I have been recording of MIDI tracks years on my MacBook with no problems. All of a sudden, MIDI tracks began to record notes duplicate (exact replica - even not, same speed, etc.). ... This has happened on most, but not all, tracks I recorded in the past day or so.

  I was working on a special project with a lot of MIDI tracks and a couple of audio tracks - what is shown in the YouTube video that I have included to illustrate the problem:

  https://youtu.be/AaNOxfwzsmg

  All MIDI tracks recorded in this project before the past 24 to 48 hours recorded normally without duplication. About 90% of the tracks I recorded recently have duplication. The first brief example in the video shows the bass track, that duplication of work and represents 90% of the securities. The next example short - track of cajon - has not been saved with the duplication (so far, it's the only track I checked and made record normally in the last 2 days. Pieces recorded both before and after that the cajon track was duplicated notes throughout.

  The MIDI keyboard, I use as a controller as a Roland FP80. I used this keyboard for all MIDI tracks that don't require modulation or tar leaning over recent months. The MIDI keyboard transmit channel is set to 1, and to my knowledge, there very lunch limited functionality and cannot transmit multiple channels. (It's a good size weighted keys digital piano and this is why I use it.)

  If anyone can help identify the cause of this problem I would really appreciate it! The second part of the question is I would like a quick and easy way to delete ONLY the notes duplicate on all these tracks. I had already saved 7 or 8 in the project MIDI tracks until I discovered this problem when I started to delete some notes. I would like to be able to preserve what has been recorded.

  BTW, I looked for this problem and found a similar thread, but I think that the solution is that the used keyboard passed on several MIDI channels. As much as I know who does not apply in this case.

  Thanks in advance!

  SYSTEM SPECS:

  MacBook Pro (retina, 13 inches, end of 2013)

  Mac OSX Yosemite - version 10.10.5

  Processor: 2.4 GHz Intel Core i5

  Memory: 8 GB 1600 MHz DDR3

  Graphics card: Intel Iris 1536 MB

  Logic Pro X - version 10.2.0

  Working backwards... You can remove duplicate events by selecting all the events in a region (cmd-A) if in the roll of piano or selecting the region then go to menu edit - midi events Delete - reproduced.

  or (D).

  On why - there could be a number of reasons... First, open the list of events by pressing D and see if they are in fact identical... especially on the same channel environment.

  Also - if you could upload a screenshot of the low track to include both region and the railway inspector.

  

• My application running on 7.1, not on 7.0

  Hello world

  I just submitted my app on the BB world and I have a problem only for OS 7.0

  First, I published the application just for 7.1 and all works fine.

  Later, I wanted to make compatible with 7.0 software. So I create the cod file in Eclipse with JRE 7.0, without errors, etc... and finally, the app has been approved by the Blackberry support.

  The app still works on 7.1, but for 7.0 users, they have the following problem when they try to launch this application, in a pop-up window:

  "Error at startup App_Name: class 'net.rim.device.api.system.Bitmap' not found."

  and the application does not start.

  I saw this problem on BlackBerry Curve 9360 and Bold 9900, but I think it's just related to the OS Version 7.0 (9900 Bold and curve 9360 with 7.1 is working)

  If anyone has an idea about this problem?

  Thanks in advance.

  MB

  I found the solution:

  It's the weight app. I don't know why an error appear in 7.0 version, but now I just delete some unused files and that's a mistake is no longer allowed.

  Very disconcerting because the pop-up message absolutely does not relate to the real problem.

  I hope this can help!

  MB

• Design mode link text appears tiny

  Hello
  I use DW CS3 for a few days. Everything seems to be the same that DW 8, but some texts of link appear tiny in the design mode window split in CS3. They appear in a 'normal' size (as labeled) DW 8.
  
  Any ideas what to edit in CS3? Unfortunately there seem not to be any possibility of import of DW 8, DW CS3 settings such as the colouring of the code, no matter what. So I changed everything in CS3 (hopefully all) like in DW 8. (A tedious task using 2 computers, because DW 8 does not open when CS3 is installed and open).
  
  I use an external stylesheet, which makes the menu link appear white on Blue:
  
  {A:Link}
  do-family: Arial, Helvetica;
  font size: xx-small;
  color: #ffffff;
  text-decoration: none
  }
  
  A: visited {}
  do-family: Arial, Helvetica;
  font size: xx-small;
  color: #E4F90A
  }
  
  Hover {}
  do-family: Arial, Helvetica;
  font size: xx-small;
  color: #E5EA60
  }
  
  {A: active}
  do-family: Arial, Helvetica;
  font size: xx-small;
  color: #af2626
  }
  
  In the middle of the page, I have another link, which should appear in blue on a background image. If I tag it manually in html:
  
  < a href = "arhontikophotos.html" > < font color = "2C3A82" size = "2" face = "Verdana, Arial, Helvetica, sans-serif" > < b photos > Arhontiko Villa < /b > < / police > < /a >
  
  On the web page in a browser, it seems well defined. In the CS3 design window, the letters of "Villa Arhontiko photos" are so tiny, they are almost unreadable. It is quite difficult to work like this.
  
  Maybe can someone help?
  
  Thank you
  JML

  There is really no need to use to do this - just assign the class
  to the anchor tag.

  Photos Villa
  Arhontiko

  ========================
  Virginia Carter
  Carolina Web creations
  carolinawebcreations.biz
  ========================

  timW22374100 wrote:
  > Hello Virginia.
  >
  > Thanks for the suggestion.
  >
  > I already changed this part also in css. I used the span tag for the css
  > tag goes in the link text. Like that it displays correctly in DW CS3:
  >
  > Villa photos
  > Arhontiko
  >
  > the "Text2" class in my css file looks like this:
  >
  > .text2 {}
  > do-family: Verdana, Arial, Helvetica, without serif.
  > size of the font: 13px;
  > color: #2C3A82;
  > text-decoration: underline;
  > make-weight: bold;
  > }
  >
  > I still have no idea why the other will display correctly in design
  > window displays correctly in the window design of DW 8 and DW CS3
  >
  > (estella-villas.gr/arhontiko.html)
  >
  > Cordially
  > jml
  >

• HP Envy 17 t-j100, extended monitoring mode stops all sound elements, of the reasons why?

  When I plug my second monitor using the hdmi port and change the monitor mode to extend the audio stops working. The volume mixer still watch movement audio but released no audio. Ive looked upward a soltion but I can't find an awenswer to this problem. any thoughts why this could happen?

  solved my problem, go into the menu speker and disable everything except the hp speakers, reboot everything and save options.

• Why logical weight is only 1.5 GB?

  I want to buy Logic Pro X, I saw several options to do this. In Apple's site, the software supposed to weigh only 1.5 GB; in other web sites, I found that logic has about 40 GB of downloadable libraries of sounds/instruments/plug-ins. If I download the software directly from Apple, should I buy the library apart from the software itself?

  Laughing out loud. There are almost 60 GB of additional content, you can choose to download from the inside of the logic itself... for free.

  This includes all the various Apple Loop content, samples of Alchemy, presets, other EX samples and so on...

  It is the Basic app and it is among the essential elements that are only about 2 GB

• 15-j171nr battery life

  15 - j171nr lists the 5 hours 15 minutes battery life.  15 t-j100 lists as up to 9.5 hours battery life.  Both have the same battery 6 cells.  Why the difference?  Is it because the 15-j171nr has a GeForce graphics card?  If so, is it correct to assume that in any laptop if you choose one of the dedicated graphics cards it will reduce considerably autonomy?

  The short answer is Yes.

  The a5-j100 is a configurable base unit. Each increase in performance on the product corresponds to a higher battery drain. Up to 9.5 hours battery life is minimum configurations.

  Think of a battery as a tank of gas.

  looks like a faster processor by pressing the gas pedal harder, it will use more autonomy.

  A dedicated graphics card is like putting in a turbocharger. You get more performance, but use more autonomy.

  Even add memory will flow battery faster - why? Because these extra components need energy to be recycled through them constantly. Electronic circuits more in the loop, the more energy it takes to keep their power.

  Remember also that the 'up to' ratings on the battery life varies also in your own use.

  Imagine two cars with fuel mileage ratings identical. a driver reduces the gas pedal and leads to a constant speed, while the other driver stops and starts quickly. They will each receive a fuel mileage result different.

  So, using Microsoft Word with the wireless turns off and the screen brightness turned down give a longer battery life than streamining a film on the interent with maximum brightness.

• Health - weight data manually entry

  I would like to know why on Earth - with iOs 10 - it is no longer possible to manually enter the data on weight - with no need to another application or gadget - as I have done every day since I got my iPhone.

  Health App > measurements > touch it if you have the weight widget and enter a new.

  If not click on medical id in the lower right corner, select Edit and change your weight from there.

  Edit: You can also type the weight in the search under the health APP bar and it will come back to allow you to change it.

• weight iMac

  What is the exact total weight for iMac 27inc 5 k retina 2015, including the box

  Shady.Samy,

  Why not call store online from Apple? The computer is 21 lbs, I would image the box would not be plus an extra 4-5 lbs.

• HP Envy 17 t-j100 Quad Edition: product number mismatch

  Hello!

  I'm about to upgrade to Windows 10 and have questions about my laptop.  By my initial order, the number of the product I ordered was E4S82AV, but the HP Support Assistant and the battery compartment that it is E1P14AV. When I touch E4S82AV in the issue of the product on the site Web of HP, no software or drivers are found. I have a matte screen, no touchscreen model.

  Can someone tell me the difference between these two products numbers and why the one I ordered does not appear to exist on the support Web site? It's not touchscreen touch vs?

  I fear that if I need software or driver updates, those under E1P14AV are really suitable for my system.

  For example, I had a problem with an update by HP Support Assistant on my CyberLink PowerDVD software failure (it finally updated OK).  He had several Softpaq SP70823 and this file already exists in my folder in C:\SWSetup.  I checked the support Web site, thinking I would try to download the software from there, but I don't see that listed as an option under E1P14AV sp70823.

  Thank you!

  Your Envy 17 t-j100 Quad Edition is a CTO (configure to order) machine that starts with a number of basic product which replaces a specific number of product once that order you with the card you want. Not sure about the DOWNLOAD - but not the first time neither model which has software missing from the support page.

• Portege R700 - why no 64 don't bit OS?

  Something I'm not quite suite.
  I like the look of and the weight of the portege but doesn't understand why I can't buy one in the United Kingdom with the 64-bit windows professionals.

  I mean 32-bit should only be able to treat up to 3 to 3.5 GB.
  They are sold with up to 4 and all the ads suggest that they can be expanded up to 8 GB.
  Or can anyone direct me to someone to sell with the 64-bit operating system.

  Hmm the Portégé R700 - 106 has been delivered with preinstalled WIN7 64 BIT PROFESSIONAL and in addition you would get Win XP DVD.

  But this can depand on R700 laptop model...

• HP ENVY 17 t-j100 Quad Edition: battery problem?

  According to the battery in the taskbar icon...

  "70% available (plugged in, does not support).

  UH... Why is he not supported 100%?

  Hello @paradive,

  Welcome to the HP Forums!

  I read your post on your ENVY 17 t-j100 battery does not charge and wanted to tender hand for you.

  The system shows the loading if you disconnect and then reconnect the battery power adapter? The question has just begun or occurred after an update or upgrade?

  You can start to test and calibrate the battery and review suggestions on improving the performance of the battery.

  If you haven't already done so, please make sure that you use the latest software and device drivers for your system.

  If one of my suggestions will help you to solve the problem that you are experiencing, please click accept as Solution so that others who may have the same difficulty can find the answer more effectively. Thanks again for participating in Forums of HP!

  Thank you!

• Want 15t_j100 Quad E2E34AV Ed: 10 Windows upgrade failed - blinking display of Envy 15 t-j100 Quad Edition Notebook PC

  Upgrade Windows 10 failed on my Envy 15 t-j100 Quad Edition laptop.

  Symptom after upgrade has been a video exhibition quickly flashing without control of the PC.

  I have to go back to the previous version - Windows 8.1.

  Back with success on Windows 8.1

  Symptoms point to video card problem after updated Windows at level 10.

  My laptop has two, provided by HP online:

  Intel HD 4600 Grapics (internal)

  NVIDIA GeForce GT 740M

  See the research, that Intel and NVIDIA have Windows 10 drivers for these graphics cards.

  Yet immediately when Windows 10 signing after upgrade, the laptop display has been viewed quickly.

  The only way I could get control of the laptop was CTL-ALT-DELETE to start the Task Manager.

  The Task Manager showed that more CPU resources would "host setting synchronization process.

  Called Microsoft Support - they indicate a likely problem with display adapter driver and advised to "go back" and then contact HP support.   called HP Support and they advised to work with Microsoft.  Great!
  
  Would appreciate recommendations on the way forward for Windows 10.

  Dgood43 wrote:
  

  Initially I found the 10.18.13.5324 Rev.A-NVIDIA graphics driver.

  I was allowing the HP site automatically detect my curent - Windows OS 8.1.

  When I manually switched OS Windows 10, I see it listed.

  I also see 10.18.15.4248 that place listed for the Intel HD 4600 graphics card.

  Can I install both of these drivers before you upgrade Windows 10?

  Both are supported on Windows 8.1?

  If so, why HP Support Assistant would not have install me the upgrade?

  Am I missing something here?

  Install only the softpaq grahips from Nvidia. It will allow to install the two drivers.

  When I click on the button 'Download' blue, it offers two choices:

  Use HP download and install the Wizard (recommended)

  Download only

  This is the second option that you recommend when you say to use "usb flash drive support? Yes. Create an installer of Flash 10 Windows usb player. This is the second choice option.

  Thanks again for your help!

• HP ENVY 17 t-j100 storage upgrade Question

  Hi all

  Looking at the 17 t-j100 with these specifications. On sale for July 4 at a nice price. My only hesitation is not being sure what upgrades of storage are simple, feasible and cost-effective in this configuration.

  Data sheet:

  Hello

  1 SSD is cheap worm now. I don't know why many providers still put new machines with HARD 5400 RPM disk. I bought a 960 GB SSD from Crucial for less than $500. It is very good but not the best in terms of price/performance,

  2. 16 GB is the way we go with more graphic work,

  3. cloning is the best option, it will save a lot of time from top to bottom. Pay about $15 more you can get a package of Crucial and it works very well. There are a few free products of cloning:

  http://www.techsupportalert.com/best-free-drive-cloning-software.htm

  Kind regards.

• SVT, weighting... filters arbitrary rate works but fixed rate does not

  Hello, I am a new user of LabView, but slowly get the hang of it through tutorials and help!

  I found that if I feed a waveform channel in a 'SVT A, B, C of weighting filter' VI, I get the result that I expect with the 'arbitrary' of the Filter version of rates, but no filtering seems to be applied if I use the version of rates "fixed".

  The data originally comes from an express at 10 kHz of VI DAQ Assistant.  It is a standard sampling (as indicated in the article of tips OR here), so I don't know why it should not work.

  While I have it works very well with the version of arbitrary rate of the filter, it is recommended to use the "fixed" version and I also try to understand why things are the way they are...

  Thanks if anyone can shed some light on it!

  It's good, I finally found the answer!  He has just occurred to me that sample only prices are supported by the hardware, and while I entered 10 kHz in the DAQ Assistant, I realize that he was actually giving me 10240Hz, is not a sampling rate 'standard' for what is the fixed filter is.

  This makes sense now, and I've learned something new.

  Thanks for your help :-)