Weight update

Similar Questions

• The myfitnesspal website is most compatible with you? It will not connect, but works with all other browsers. I did help out. Did not work.

  Yesterday, I had problems with the Myfitnesspal.comwebsite. I have a tab set to open automatically when I start the browser every day. I could not connect any information in the site, so I tried a log off and log in. It doesn't let me log on to the site. I contacted, myfitnesspal and we worked through many steps in troubleshooting. I also tried all the steps of troubleshooting your site. I even made a full stop and start my computer. Nothing has solved this problem. I had the same problem with a couple of store that I like to go. The shop site work finally after more than six months of frustration. Myfitnesspal works on all other browsers. So with everything which has been tried and done, the problem seems to be your side somewhere. I'm running Windows 7 Professional 32 bit.

  I really hope that this could be solved because the site appears better on your browser. If you have any questions, feel free to send me an email.

  Thank you for what you can do about it, and for your time.

  Hello.

  I used to have this problem with Firefox only for some time. I was frustrated beyond. MyFitnessPal is 100% compatible with Firefox, however, some extension (type of) can cause significant headaches. I hope that this fix also helps.

  Do you by chance the https everywhere extension installed? It's a great add-on and I strongly recommend using it, however, unless you "disable" its use with MyFitnessPal, you will not be able to connect to your account, add food, weight update, see graphics, etc..

  So don't panic. Your question is likely to be what I had as well. I just went in the https everywhere extension and where it says "MyFitnessPal" with a checkmark (saying it is ACTIVE for the site), I simply clicked to disable the add-on for a site.

  Simple and it works instantly. I hope it does for you too! If you do not have this add-on so it is probably related to some thing similar so good luck to you!

  D

• Since the last update, I can't change my weight of the race less than 1 point.

  Since the last update, I can't change my weight of the race within 1 point (or fraction). Any ideas would be so appreciated.

  Align with the pixel grid is enabled in the document you are using. Disable it in the transformation (main and flying Panel) Panel. You can disable it when you make a new document in the Format of Document dialog box.

• Can update you weight field of a web application automatically?

  I'm having a real hard time understand why we have the power in British Colombia to create web applications, but may not sort the data the way we want through automation... I realize at this point, the only way to handle the weight field to sort my articles by date. However, I am building a user driven site with submitted by the user all the content and it should be available immediately. Now obviously results are posted online as soon as they are submitted, but right now, the way auto only show results that makes no sense is by a recent activity listing or alphabetical order.

  Is it possible to automate the update of weight of the item field so that the results can be available in the order, for example, Date of the event (custom date field)?

  HELP please - all this power seems of course as a loss if you cannot manipulate your results accordingly!

  Phew - that was a doozy.  OK - I've updated my violin with the new version of the code:

  (function ($) {}

  var container = $(".sort-list»);

  var elements = $(".sort-point»);

  {Items.each (Function ()}

  Convert the string in attribute 'data-event-date' to a more

  standard date format

  var BCDate = $(this).attr("data-event-date").split("-");

  "var supports = BCDate [1] +" "+ BCDate [0] +" "+ BCDate [2];

  Supports = new Date (supports) .getTime ();

  $(this) .attr ("data-event-date", member);

  });

  {Items.sort (Function (a, b)}

  a = parseFloat ($(a).attr("data-event-date"));

  b = parseFloat ($(b).attr("data-event-date"));

  return a > b? -1: a

  {.each (function ())}

  Container.Prepend (this);

  });

  (}) (jQuery);

  Just replace the old code above with this new version and you should be all set in all browsers.  I tested it in Chrome, Firefox, IE8-10

  In the case where you want to know what I changed - essentially the handles of IE and Firefox sort by object date differently - Chrome is more flexible and more intelligent so I had to convert each string in the "data - event date ' js date a string similar to"MM DD YYYY"which all browsers can easily convert into an object. And I got it in Chrome and Firefox, but IE still gave me questions as if you use the javascript 'sort()' method in Internet Explorer, it expects a number only so I can convert the string to "data - event date" in a timestamp that is just a series of numbers corresponding to a unix timestamp (IE-"1357016400000" is the time stamp for the 01/01/2013) and then I converted this string to an integer in javascript and now this works cross browser.

  Here is a link to the violin to see it in action: http://jsfiddle.net/thetrickster/7U3Xd/

  If you have used an older version of my script that he does not work for Firefox or IE

• Line weight/thickness update

  Hey all,.

  The online tool is not intuitively functional too for me. It creates a line into a new layer - so far, so good - named "form n" (where n is the number). Why not "line? And then the thickness of stroke or thickness does not update when I go to the option bar, having the "Path Selection" tool Can I change the colors well. Care to explain, if you went?

  Thank you for the support.

  Charles

  The tool online attracts mainly a rectangle that is long and narrow (with arrowheads in option), oriented in the sense that you it drag on. As such, it produces a shape with a path closed; It loops around itself.

  You create a path with the pen tool. If you have the option of defined shape with the pen tool, you can then use the feature race to update what you want, change the line thickness, or making it dashed or dotted. You can also produce curved lines, which you can't do with the online tool. Note If you are curvy, you want to set the padding to zero.

• Firefox is scrolling out of control and does not not in my Weight Watchers program

  When I'm in my Weight Watchers followed and trying to implement portions that the menu goes up and down in an uncontrolled manner and will not stop or give me the portions and also menu track I have for the day is also go up down without pulling me down on the bar. It's the first night, that what has happened and is happening in Firefox, so I need help. I like to use Mozilla Firefox for my browser and you don't want us IE. This has not happened before, and I've used it for over a month. Any help would be appreciated. My Firefox is updated, so is not the problem.

  Hello

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!
  Otherwise you can try other tests
  Thank you.

• iPad 2 Air - 9.3.2 update results in error 56

  I tried to update my iPad perfectly fine Air 2 9.3.2 and now I have an expensive paper weight. Error 56

  I guess that he corrupted the firmware, is it possible to fix this?

  Error 56 may be a hardware problem, but try the Recovery Mode:

  Connect your device to your computer and open iTunes.

  When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

  Keep now until see you the recovery mode screen and wait that he eat.

  You may need to do the above, more than once as recovery mode is difficult to enter.

  Restore first as New and test. Then restore backup if you wish. If the backup is corrupt it will probably bring back the question.

  https://support.Apple.com/en-us/HT201263

  Get help with iOS update or restore errors - Apple Support

• Apple software update server could not be found

  I get the very annoying error message on the update to the latest version of iTunes on my computer Ultimate de Windows 7 32 bit 12.3.3.17. "The Apple software update server could not be found. Check your Internet settings and try again. "My program of the Apple software update is 2.2.  I tried a repair it and iTunes without result. Any suggestions?

  It seems to be widespread. USS worked for me and even used to update iTunes earlier this week, it still worked after that. But this morning the error appears when you try to ASU on all our machines. The reason that it seems that the latest version of iTunes is to blame is I think as part of its installation is ASU updated to the latest version, after which the server problem. I contacted the support apple via Twitter, maybe that others should do the same to add weight to the issue. what I've read, it seems that a server AKMAI problem is to blame. Hope that this problem is fixed soon.

• HP Pavilion g7-2341dx Notebook PC updated?

  I own a HP Pavilion g7-2341dx Notebook PC and I want to do the updates as ssd, ram, drive bd and upgrades to 1080 p.  My question is drive bd burner I would need and is it still a screen 1920 x 1080 compatible I can bolt on my laptop?

  I had used. If I could aford ID get a new leapmotion with envy but living for people with disabilities. so I just have to work on this one

  Thanks in advance, alice

  my pc specs:

  G7-2341dx product name
  Product number D8X74UA
  Microprocessor 1.9 GHz to 2.8 GHz AMD Quad - Core A8 - 4500M accelerated processor
  The microprocessor's L2 Cache 4 MB Cache memory
  4GB DDR3 (1 DIMM) SDRAM memory
  User accessible memory Slots 2
  Graphic video AMD Radeon HD 7640 G Discrete-Class graphics and up to 2029 MB total graphics memory
  Display 17.3-inch diagonal backlit by LED BrightView HD + (1600 x 900)
  750 GB drive at 5400 RPM hard drive with HP ProtectSmart hard drive Protection
  Multimedia drive SuperMulti DVD burner
  Network 10/100BASE-T Ethernet LAN (RJ-45 connector) map
  1 x 1 wireless 802.11b/g/n WLAN connectivity
  Its dual speakers Altec Lansing with Dolby Advanced Audio
  Keyboard full size Island-style keyboard with numeric keypad
  Pointing device Touchpad supporting gestures multitouch with power button
  Ports external multi format digital card reader for Secure Digital and Multimedia cards cards

  2 superSpeed USB 3.0

  1 bus (USB) 2.0 universal series

  1 HDMI

  1 VGA (15-pin)

  1 PORT RJ-45 (LAN)

  1 plug headphone-out/microphone-in the drop-down list
  Dimensions 1.22 in. (min H) / 1.45 in (H maximum) x 16.22 (w) x (d) 10.53
  Weight 6.57 lbs
  65W AC adapt Power

  6-cell 47WHr 2.2 Ah lithium-ion
  ID Mech Description HP TrueVision HD Webcam with digital microphone built-in

  I'm a little curious as to why you want to upgrade to a BluRay burner.

  You can watch movies online without additional expenditure on this issue.

  Here is a link to the guide for maintenance and Service of your laptop. He has illustrated parts list that gives the part numbers of the units that will fit your laptop.

  You can upgrade to an SSD. It provides incredibly fast access times that make it a true performance upgrade. Consider buying an SSD in migrat kit which includes a usb cable to sata and cloning software. I highly recommend the Samsung and SSD Crucial players.

• Lenovo E560 does not start after the BIOS update

  Finally, gave in the throbbing Lenovo and updated the BIOS on my E560 - big mistake.

  He's been through and installed correctly, no problems with chess, etc. (finally none that appeared on the screen).

  The laptop delivered to market very well, he crossed and updated the BIOS, restarted once and... nothing.

  At the present time I jumped the battery and power, reset the device (press the pwr for 15 sec, etc.), removed all devices, etc., etc., google for similar events and so little matter what I did, the laptop is as dead as a brick. I have the red on but that is all. Nothing doesn't appear on the screen (so can't see UEFI/BIOS), no fans start and the only thing that does the job is that the DVD drive can be opened.

  It's a relatively recent laptop (minimum 12 months so still under warranty), but as a word of warning to the other owners E560 - DO NOT INSTALL THE latest VERSION of the BIOS update.

  Well not unless you want a weight of expensive paper for your office.

  Managed to get everything sorted out (thanks to Lenovo support).

  Pop the battery and AC, then remove and reinstall the CMOS battery brought the laptop to life.

• Apple Apps Pro not usable since the last installed updates

  Greetings,

  On 19 December 2015 the following has been installed on my computer: 1) 2015 update security-006 version 1.0.  (2) Itunes version 12.3.2. (According to the App Store update page; this one was installed twice).

  Computer has begun to install updates automatically while I was working on a track. I chose to not not to allow the computer to restart and led updates to continue at a later date.  I finished work, off the Mac til the next morning.  When I tried to work, suddenly LPX operates now that it has a weight of 1000 live births by dragging it down.  CPU and HD m remain lit all the way to the top and take a long time to calm down.  Sound level meters don't update in real-time and data audio and midi will be properly synchronized.  I hear a blurry/airy sound on the left stereo channel (it looks like warp any) during audio playback as well. Tried rebooting, shutdown/restart etc... Disk utility says no problem detected.

  Any thoughts?

  BOE

  Logic Pro X, OS X Yosemite (10.10.5), Symphony TB 16 x 16, ExpressXT Midi

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - subject

  Safe mode - Yosemite

• Windows Update has messed up my computer...?

  I was going to restart my computer and saw the update windows... so I decided to update my computer so... When windows has finished updating and reloading... He would work for the first minute or so it would freeze... Freeze not literally... but nothing will work and I can still move the mouse but the mouse icon would be stuck in this symbol of loading... (the little blue circle)

  At the beginning I thought I would just let it finish loading all that computers in train load... but 30 minutes later, its still stuck on loading... I did a hard reboot, and the same thing would happen... 30 seconds - 1 minute to load windows it would freeze just about anything under its weight...

  So I thought the windows update screwed up my computer... I loaded in safe mode and tried to do a system restore, only to discover that my computer system restore has been disabled! ??? ... so now I have no idea what to do... someone please help me I have a lot of work to do... Thanks in advance

  on the top of my head, here are my computer specs:

  Windows Vista SP1
  Intel Core i7 940
  12 GB of ram
  NVIDIA FX 1700

  Update on the situation:

  I've posted on several technical forums and 2 of them have been asked to go into SafeMode Add/Remove programs and uninstall then windows updates...

  The problem with that is that my computer does not record the fact that he just installed an update... It is said that the update performed on the computer has been on the 17th of September... the date today here is Sept. 23...

  I uninstalled the 2 updates from 17 without prevail... the problem persists... I load windows in normal mode... and 30 sec-1 min later it freezes just on loading things...

  Should I just keep uninstalling windows updates until the problem is solved?

  No answer to this problem... two days of discussions of the forum tech 6... 1 hour 4 telephone conversation with microsoft support technology... end result? Reinstall Windows... GG

• Windows Update will not updated configuration complete

  Windows updates

  When I start the power down on my PC it says install updates and shut down. Well well after he makes the configuration and stops and I restart the PC will say setup of new updates. Well after his weight made to say: updates are not configured correctly... Redo or a reconfiguration of updates... for some reason any my updates are not what they are supposed to... and clue whats going on here?

  Hey stump jumper.

  (1) remember the update that has been offered?

  (2) is the computer in a reboot loop?

  Step 1: You can follow the steps mentioned in the article below, which deals with a similar question

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358/en-us

  Thank you, and in what concerns:

  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Product name: HP Pavilion 17 N: HP Support Assistant > HP updates > update BIOS (AMD processors) - clear update reminder?

  Hello

  I got a recommended set the HP Support Assistant program to update update for HP Notebook System BIOS (AMD processors).  I installed the update to the BIOS but the HP Support Assistant still says I need to run the BIOS update.  So I ended that run the BIOS update 2 times more but it prompt update with the exclaimation point in the promgram HP Support Assistant to delay the update of the BIOS is always there to want me to install the BIOS update.

  How can I clear this reminder of update of the HP Support Assistant program?

  You are welcome!

  1. If machine BIOS update after downloading, it will automatically start the system and show you the whole process and progress.

  2 just by downloading the BIOS update does not update. However no Expert here don't advise update BIOS to do as a routine, including through HPSA.

  If an UPDATE of the BIOS damage your laptop computer, you will not be able to turn on the machine - in short - it'll be no more than an expensive paper weight.

  3 If the BIOS has been updated successfully, then you go and not be able to on & do your work in portable as usual.

  Concerning

  Visruth

• Didn't update KitKat A1 - 810 OTA

  Hi, I finally decided to update my stock of 3 year, A1-810 to the OTA of KitKat update. Unfortunately, something went wrong and now I can't go past the Acer boot logo. I have read other threads and tried everything I could find for example hard reset holding power for the button in 20 seconds, then plug the unit and held for another 10 dry but nothing worked.

  I can start after the recovery, which is now different, so that it looks like recovery, upgrade to the version of KitKat, but I think I need now KitKit update.zip to fix this. This is what shows on the new recovery screen:

  Acer_AV0K0_A1 - 810_1.029.00_WW_GEN1. Can someone please help me get the correct update.zip so I can flash the recovery and set my tablet as currently, it's just a fancy paper weight. Thank you.

  OK, check again the PM.