Weird! Data are bunk, my basic goal is trying to ruin, help me pls.

Similar Questions

• Data are skewed between saving and loading

  Hello

  I'll have a problem saving and loading the data in my VI. My software allows the user collect data from an acquisition of data which is then displayed on a graph for them to see. They can save the data, then load it back later to compare with the current data. Here is the basic methodology:

  1. the data are read in the program via a data acquisition

  2. data are saved in a file in spreadsheet to a table with the VI 'save in the spreadsheet file.

  3. the data is loaded to the program with the VI "read the spreadsheet file.

  4. the data are transferred in the same graph is was originally shown on

  However, when I save the data and reload, my chart is slightly distorted. I noticed a few things:

  1. the values of X are a little more for the loaded data vs the same data front to save/load (DECIMAL NUMBERS)

  2. the values of are are not affected. (WHOLE NUMBERS)

  3. the loaded data are more straight lines, which means that the same data point is used for row X or Y values

  attached is a screenshot of the graph - red data is from this session, Green data is loaded.

  export excel to this same graph is attached.

  No one noticed an interesting trend in this anomaly, or have any ideas on what I can check? My code does not change the values, but only manipulates them. Please let me know if you need more information, I've tried including as much as I could without a useless book.

  Thank you

  Joe

  To solve this kind of problem, replace the random number generators with a simple signal that you can easily identify as a linear ramp, the number of iterations or a low frequency sine wave. By selecting a signal that is suitable for your application, you should be able to tell if the data are all be recorded and in the right order.

  The use of nodes property to move data around sounds like a disaster in the making.  Examine the queues, user events, or functional global variables.

  Lynn

• Data are not filled in the Dimension according to the hierarchy

  Hi all
  
  I have a DIM_ITEM table with the following structure,
  

  ITEM_KEY      NUMBER(10,0)
  ITEM_NAME     VARCHAR2(50 BYTE)
  ITEM_SHORT_NAME     VARCHAR2(25 BYTE)
  ITEM_CATEGORY     VARCHAR2(50 BYTE)
  ITEM_TYPE      VARCHAR2(50 BYTE)
  ITEM_BRAND     VARCHAR2(50 BYTE)

  Below the data are met

  insert into dim_item values (1, 'Samsung 42 LED Television', 'Sam 42 LED', 'Electronic', 'Television', 'Samsung');
  insert into dim_item values (2, 'Samsung 530L Double Door Refrigerator', 'Sam 530L DD Ref', 'Electronic', 'Refrigerator', 'Samsung');
  insert into dim_item values (3, 'Samsung 32 LED Television', 'Sam 32 LED', 'Electronic', 'Television', 'Samsung');
  insert into dim_item values (4, 'Samsung 57 LED Television', 'Sam 57 LED', 'Electronic', 'Television', 'Samsung');
  insert into dim_item values (5, 'Samsung 75 LED Television', 'Sam 75 LED', 'Electronic', 'Television', 'Samsung');
  insert into dim_item values (6, 'Sony 32 LCD Television', 'Sam 32 LCD', 'Electronic', 'Television', 'Sony');
  insert into dim_item values (7, 'Sony 42 LCD Television', 'Sam 42 LCD', 'Electronic', 'Television', 'Sony');
  insert into dim_item values (8, 'Samsung 175L Single Door Refrigerator', 'Sam 175L SD Ref', 'Electronic', 'Refrigerator', 'Samsung');
  insert into dim_item values (9, 'Samsung 230L Double Door Refrigerator', 'Sam 230L DD Ref', 'Electronic', 'Refrigerator', 'Samsung');
  insert into dim_item values (10, 'Samsung 230L Single Door Refrigerator', 'Sam 230L SD Ref', 'Electronic', 'Refrigerator', 'Samsung');
  insert into dim_item values (11, 'Whirlpool 530L Double Door Refrigerator', 'WP 530L DD Ref', 'Electronic', 'Refrigerator', 'Whirlpool');
  insert into dim_item values (12, 'Whirlpool 1110L Double Door Refrigerator', 'WP 1110L DD Ref', 'Electronic', 'Refrigerator', 'Whirlpool');
  insert into dim_item values (13, 'Royal 3+2 Sofa Set', 'Ryl 3+2 sofa', 'Furniture', 'Sofa', 'Royal');
  insert into dim_item values (14, 'Royal 4+4 Sofa Set', 'Ryl 4+4 sofa', 'Furniture', 'Sofa', 'Royal');
  insert into dim_item values (15, 'TMT 3+2 Sofa Set', 'tmt 3+2 sofa', 'Furniture', 'Sofa', 'TMT');
  insert into dim_item values (16, 'TMT 4+4 Sofa Set', 'tmt 4+4 sofa', 'Furniture', 'Sofa', 'TMT');
  insert into dim_item values (17, 'TMT 4 Person Dinning Table', 'tmt 4P DT', 'Furniture', 'Dinning', 'TMT');
  insert into dim_item values (18, 'TMT 10 Person Dinning Table', 'tmt 10P DT', 'Furniture', 'Dinning', 'TMT');

  According to these data
  
  Samsung has TV and fridge
  Sony has only TV
  Whirlpool's refrigerator only
  
  I created the hierarchy in AWM
  
  1. all items
  2 article category
  3 point mark
  4. item type
  5. name of article
  
  When I keep my Dimension and display data, it displays as
  

    - All Items
      - Electronic
        - Samsung
        - Sony
          - Television
            - Samsung 42 LED Television
            - Samsung 32 LED Television
            - Samsung 57 LED Television
            - Samsung 75 LED Television
            - Sony 32 LCD Television
            - Sony 42 LCD Television
        - Whirlpool
          - Refrigerator
            - Samsung 530L Double Door Refrigerator
            - Samsung 175L Single Door Refrigerator
            - Samsung 230L Single Door Refrigerator
            - Samsung 230L Double Door Refrigerator
            - Whirlpool 530L Double Door Refrigerator
            - Whirlpool 1110L Double Door Refrigerator
      Furniture

  Nothing is there under Samsung. But the result to expect is,.
  

    - All Items
      - Electronic
        - Samsung
          - Refrigerator
            - Samsung 530L Double Door Refrigerator
            - Samsung 175L Single Door Refrigerator
            - Samsung 230L Single Door Refrigerator
            - Samsung 230L Double Door Refrigerator
          - Television
            - Samsung 42 LED Television
            - Samsung 32 LED Television
            - Samsung 57 LED Television
            - Samsung 75 LED Television
        - Sony
          - Television
            - Sony 32 LCD Television
            - Sony 42 LCD Television
        - Whirlpool
          - Refrigerator
            - Whirlpool 530L Double Door Refrigerator
            - Whirlpool 1110L Double Door Refrigerator
      Furniture

  When I change the hierarchy as
  
  1. all items
  2 article category
  3. element type
  4 point brand
  5. name of article
  
  AWM displays data such as,
  

    - All Items
      - Electronic
        - Television
          - Samsung
            - Samsung 42 LED Television
            - Samsung 32 LED Television
            - Samsung 57 LED Television
            - Samsung 75 LED Television
            - Samsung 530L Double Door Refrigerator
            - Samsung 175L Single Door Refrigerator
            - Samsung 230L Single Door Refrigerator
            - Samsung 230L Double Door Refrigerator
          - Sony
            - Sony 32 LCD Television
            - Sony 42 LCD Television
        - Refrigerator
          - Whirlpool
            - Whirlpool 530L Double Door Refrigerator
            - Whirlpool 1110L Double Door Refrigerator
      Furniture

  But the result expected for this hierarchy is,.
  

    - All Items
      - Electronic
        - Television
          - Samsung
            - Samsung 42 LED Television
            - Samsung 32 LED Television
            - Samsung 57 LED Television
            - Samsung 75 LED Television
          - Sony
            - Sony 32 LCD Television
            - Sony 42 LCD Television
        - Refrigerator
          - Whirlpool
            - Whirlpool 530L Double Door Refrigerator
            - Whirlpool 1110L Double Door Refrigerator
          - Samsung
            - Samsung 530L Double Door Refrigerator
            - Samsung 175L Single Door Refrigerator
            - Samsung 230L Single Door Refrigerator
            - Samsung 230L Double Door Refrigerator
      Furniture

  What exactly I'm missing here? Could someone please help me on this?
  
  NOTE: The data I used here are just fake and learning goal
  
  Thanks and greetings
  M trehout

  The problem is that the definition of parent is ambiguous to some of your members. A good example of this is the 'Refrigerator' Member, appearing under the Samsung and whirlpool in your data set. There will be only one member named refrigerator in the AW, and it can have only one parent. In practice, is to choose the Whirlpool code, but my guess is that the choice is arbitrary and you might get different answers every time.

  The solution is to make the Member have unique names-'Refrigerator-Samsung' and 'Refrigerator Whirlpool' say. You can do it in the data set itself or in the map. Of the to in the mapping, you can map the level of "Item_Type" corresponding to an expression like that.

  DIM_ITEM.ITEM_TYPE || '-' || DIM_ITEM.ITEM_BRAND
  

  (Make sure you get the size before reloading with new data, since otherwise, the former members will remain).

• Follow-up - what kind of data are followed?

  Hello

  I have to wright a policy of confidentiality for the app and I wonder what kind of data are followed by the app.

  Their personal data are followed?

  And there is no option to disable the default trace, with the exception of the opt-in option?

  THX!

  Analytics is basic analytical or analytical Site catalyst, different data are followed. Read the help guide Analytics to understand what is followed. http://www.Adobe.com/devnet/digitalpublishingsuite/analytics.html

  Yes, analytical monitoring is enabled by default. Activation of opt-in option in the app Builder is the way to let the user choose whether to follow-up.

• Several columns of datagrid bound to a data area?

  Hey all,.

  Basically, I need to know if there is a way to bind multiple datagrid columns to a data area and have the ability [with getters]

  analyze the data of the area of a data in multiple columns of datagrid.

  Has anyone tried this before?

  Thank you!

  TourBudd

  What about using labelFunction? You can specify the same field in the dataProvider, but have a labelFunction which analyses and returns different results depending on the column index.

• When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  Disable the iMessage?

• I restored the password of Firefox Sync and data are not synchronized.

  I reinstalled Windows and downloaded Firefox, but forgot the password synchronization. Restore successfully, I logged into my account. But the synchronization only has not occurred. Other devices synced are not available. Can I recover the data somehow?

  When you request a new password to sync, your data are deleted from the synchronization server.

• Data are lost in the recording file

  I have problem with registration in the system binaries RT

  I started the registration of the host system

  After that some time suddenly power for the RT system disappeared

  then file was created in the system of the CR, but the data is lost

  It is showing 0 bytes

  Another fact to this problem

  My understanding is that the data is written, but indexing to access data is not done until the file is closed.  Therefore, the data are not available.

  The other possible explanation would be that the data are just put into a buffer to send on the hard drive.  There is a function buffer flush.  Maybe this will help you?

• Web Service SOAP returned XML data are unreadable

  Hello

  I hope someone with some experience of SOAP could help me find a solution for which XML data coming out of a Web Service (SAP production) are illegible.

  In the attached file is the Web Service response, and as you can see in the header of the request is OK. (request to pass a serialized PCB of a 'tail' to 'work'). Request is successful (I manually check by directly connecting the SAP web service and check), but also the data on the printed circuit should be returned (edge stock code, etc...).

  My request and response with the XML data returned works very well in SoapUI.

  Any help would be appreciated.

  Darin.K wrote:

  I agree with Phillip (except that you want to "inflate" the payload).  You can simply post a VI with full response defined as default in a string control/indicator and I am betting we could get it sorted.

  Thanks Darin, I think acompress and after reading an article google re: SAP NetWeaver, who used the terms inflate and deflate, I confused my prefixes. I also regularly exchange numbers when transcribing the long numbers. Dyslexic, I am.

  JonnyR - please use the uncompress function I've included on the same link as soon as possible. You will need to remove the header HTML of the string portion. If you do not, unzip it will interpret the header as compressed data and you will get jumbled as output data.

• Update fail, have 3 updates that load, but then the icon appears again advise that even the dates are ready for loading.

  I have Windows XP Home Edition Version 2002 Service Pack 3.  I have 3 updates that load, but then the icon appears again advise that even the dates are ready for loading.  Is it possible that updates sent me are for the 2003 Version?  Whenever I update these 3 updates, a window shows updated loading successfully, but they still remain as an icon in my taskbar?

  CrystalBall © SEZ...

  See the RESPONSE message in this thread-online http://answers.microsoft.com/thread/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

• OK CTFMON.exe is an Enigma to me. It seems creap some people out. THE DATES are suspicious enough too.

  * XP.
  * The file is located in c:\windows\system32
  (* But one) glary utilities stop it on start up
  (* b) dates are meaningless: it was 'created Sunday, 25august 2030"(it is two - thousand-and-thirty AD).
  * I would be grateful if someone could explain if it is just a typo, or do I potentially have a problem.  It was amended on March 14, 2008 and available today 16 NOV 09.
  * size: 15.0 KB (15 360 bytes)
  * size on disk: 16.0 KB (16 384 bytes)

  Cheers.

  The creation date is of course funky, but file size numbers are good.  On my computer it was created and modified on Monday, April 14, 2008.

  Right-click the file, and then click Properties > Version .  Admittedly, Copyright: © Microsoft Corporation. All rights reserved to the site , and the issue of the company must have a value of Microsoft Corporation .  I scan with my anti-virus program and submit it to Virustotal for further analysis.

  For more information, see the frequently asked questions about Ctfmon.exe , Microsoft Knowledge Base article.

• How can I get my icon of network connectivity added to the notification (to the left of the date) area?

  original title: Hello, how can I get my icon of network connectivity added to the notification (to the left of the date) area?   Thank you, NT

  The icon disappeared after stopping at the wall accidentally. When I right click on the taskbar, go into the properties box and notification, network system icon is grayed out.

  Thanks for your help.

  Hi NT,

  You can read the following article and check if it helps.

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer

  You can also consult the following articles and check.

  Show all icons in the notification area (system tray)

  Remove icons from the notification area (system tray)

  Hope this information is useful.

• Windows Fax and Scan-do can't fax any type of attachment "the message could not be sent. These data are incorrect. »

  Original title: Windows Fax and Scan is unable to fax any type of attachment

  I am trying to send a PDF using Windows Fax and Scan Ver 6 Build 6002 SP2.
  I get "the message could not be sent.  These data are incorrect. »
  I can send a cover sheet, or something typed into the dialog box, so the modem works fine.
  The problem is with an attachment to a fax.  Tried to PDF, DOC, ZIP, JPEG, and TIFF.
  I found lots of posts with the same problem, but no solutions or problem.

  Windows Vista Business SP2, Adobe Acrobat 9 Pro using

  Just ran the SFC system (C:\windows\systems32\sfc/scannow) and repair files corrrupt.  WF & S now works well when you attach files.

• How to hide script data are posted on the sites of URL?

  Installed IE9 Beta. Cross site scripting data are displayed on web pages. It can be removed?

  Problem solved. Compatibility btn clicked and "script data" is not displayed

  P.S. displayed only given script on the homepage.

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.