Weird problem of cropping?

Similar Questions

• After Effects can not minimize the very weird problem...

  Hello

  I have a weird problem with after effect, I can't minimize the programm!

  I'll explain what the problem is with the help of these screenshots.

  Information:

  Installed: After effects 9 cs4 version

  Working on one: Windows xp sp3

  

  Well, after effect opens full screen nothing weird on this subject right, so I tried to play it down, but! the following I receive

  

  He is completely better! and I can't move the ore window to resize the window.

  I check with Photoshop and Illustrator, and they are workin very well.

  Please help I can't learn tutorials so it's frustrating with a window of max.

  Please do not make premature conclusions about the problems of bugs. Many times they are not in your specific case, behavior was never reported by someone else, if chances are it's a configuration problem. To me, it seems that the resolution of the screen may not be set correctly, and so AE can not determine what resolutions to maximize minimize not correctly. Screenshots look slightly cropped off the coast on the right side, what could the server to highlight my hypothesis. In addition, there is a mode at AE that hides the title bar and there is even one that disables the menu bar. They are controlled by the Ctrl + a and Ctrl + Shift +------shortcuts normally. If another application "steals", while EI is running, this can cause problems. So, all the rights, look in your graphics card (which you tell us nothing, BTW) and study especially your status bar icons. There may be a quick / quick shortcut somewhere active option. For another thing, we will need more information as what graphics card you are using, which monitor resolutions used so to know if other applications show similar behavior.

  Mylenium

• Bottom Line: I HATE Firefox 4. It gives me all sorts of weird problems not to mention the frequent freezing MAC OS x 10.6.7. I want to go back to the last #3. It has been impeccable. I tried to leave it in the comments, but he would not submit! BUT

  Bottom Line: I HATE Firefox 4. It gives me all sorts of weird problems not to mention the frequent freezing MAC OS x 10.6.7. I want to go back to the last #3. It has been impeccable. And I tried to present this as your comments but when I hit the button submit, again, it would take. Grrrrrrrrr

  http://support.Mozilla.com/en-us/KB/installing+a+previous+version+of+Firefox

  http://www.Mozilla.com/en-us/Firefox/all-older.html

• Weird problem with the google search on Safari 9.0.2

  Hi all

  I had a weird problem with Google on Safari recently. After that the search for something from the Google home page and search page is loaded, I can't be able to change or enter anything in the more the google search bar. I have to reload the page every time google to search something else. Google search worked fine on Firefox though.

  I use the latest version of Safari (9.0.2) and I tried clears all history data, and Web site, but nothing has worked so far. My Mac is running on OS X Yosemite so what counts.

  Can someone understand what is the problem?

  Thank you.

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  In addition, a restart may help.

• Weird problem with incorrect color printing

  Hello

  IM facing a weird problem in software hp deskjet 1050.my printer printer all-in-one j410 has 5 modes i.e. normal quality printing, fast draft, simple better paper, Photo paper mode quality best quality & specialty paper better quality.

  When I put take-away color printed a photo in "quality mode best photo paper or specialty paper best quality mode ' on any type of paper, the output is pinkish or bluish.

  Please note im using black and non-rempli, true hp original cartridge 802 tricolor.

  to make things clear, im attaching a scanned photo of my printed paper that have the same images with original print quality modes.

  

  as you can see in the scanned picture, that we have the fast draft quality to the best quality of photo paper, the blueishness rose.

  Pls help me :-(

  -----------------------------------------

  My Info

  OS: windows 8 pro

  Printers: Hp deskjet 1050 j410

  Hello

  This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

  http://support.HP.com/us-en/document/c04190374

  Good luck!

• x 360 u100ng envy 15: weird problems with adapter Atheros QCA Qualcomm 9565 being unstable when it's on battery

  Hello

  I have a weird problem.

  When the notebook is on battery, the (Qualcomm Atheros QCA 9565) wireless card is unstable and very little reliable, dropping signals continuously, more importantly, loading speed (be em, Web sites, or a set of the router to the top of page!) is considerably slowed down...

  Remarkably, I can detect this by loading the page of my router configuration, when the laptop is on current alternative, I can refresh the page of the extremely fast router, but when the laptop is on battery, blocking of page of the router, so all the other websites, I try to load, the router page has nothing to do with an internet connection It reflects the quality of connection directly between the wireless card and the router and the router is in excellent condition, as evidenced by all the other devices on it.

  I also notice that when the laptop is on battery, the screen fades and informed on a regular basis, I do not think that my laptop is equipped with auto brightness adjustment features...

  So far, it seems that the problem is the battery... If the wireless adapter can run reliably with a reliable source of energy (i.e. the AC power), the wireless card is fine, right? It seems to me the battery is faulty and cannot provide enough power for the wireless card and other devices, from the ravages of this pain in the ass... computer I'm right?

  Thank you very much for your contribution in advance!

  Cong

  For the wireless adapter, check your settings under Advanced settings, Power Options. The map is set up for maximum performance on battery & power?

• weird problem 'ControlledAccessException' to 9800

  Hello

  I try to update my application to 6.0, but I have a weird problem of Pentecost of certain events.

  For example, I have a button what do some in the SQLITE database from the application, in the Simulator works fine, but when to test the same event in the 9800 device I get the strange "ControlledAccessException' its what I have test the same process in strand 2 4.6.1 and 5.0 devices and do not get this error...

  This is the code for the listener the button...

  FieldChangeListener setParHoyos = new FieldChangeListener() {
          public void fieldChanged(Field field, int context) {
  
              try
              {
                  dbHandler _dbHandler = new dbHandler();
                  String msg;
                  msg = _dbHandler.setParHoyos(idcampo , Integer.parseInt((choiceFieldh1.toString())),Integer.parseInt((choiceFieldh2.toString())),Integer.parseInt((choiceFieldh3.toString())),Integer.parseInt((choiceFieldh4.toString())),
                          Integer.parseInt((choiceFieldh5.toString())),Integer.parseInt((choiceFieldh6.toString())),Integer.parseInt((choiceFieldh7.toString())),Integer.parseInt((choiceFieldh8.toString())),Integer.parseInt((choiceFieldh9.toString())),
                          Integer.parseInt((choiceFieldh10.toString())),Integer.parseInt((choiceFieldh11.toString())),Integer.parseInt((choiceFieldh12.toString())),Integer.parseInt((choiceFieldh13.toString())),Integer.parseInt((choiceFieldh14.toString())),
                          Integer.parseInt((choiceFieldh15.toString())),Integer.parseInt((choiceFieldh16.toString())),Integer.parseInt((choiceFieldh17.toString())),Integer.parseInt((choiceFieldh18.toString())));
                  Dialog.alert(msg);
              }
              catch ( Exception e )
              {
                  System.out.println( e.toString());
  
              }
          }
      };
  

  Ty! all help me

  OK solved the problem are asociated to the GET the value

  H1 = Integer.parseInt ((String) choiceFieldh1.getChoice (choiceFieldh1.getSelectedIndex ()));

• Weird problem - all items in menu grey, all toolbar buttons is unresponsive, but has not crashed.

  Hello

  I have a weird problem with my installation of Illustrator CC 2015 - when I run the application, none of the menu items are active and neither are the buttons on the toolbar. I can't open any files, or exit the application, I have to force quit. The application itself is not crashing in the traditional sense of the term, it shows as sensitive in the activity monitor and there is no beach balling, but I can't do anything with it. Another thing to note is that I don't get to see the splash screen or any screen of welcome after launch.

  When I install a second user on the computer (same login cc) account and run it from there, it works fine, the boot screen and everything.

  This is taking everything into account, I have so far:

  1 uninstalled every possible piece of Adobe software.

  2A ran the cleaning tool and trashed all preference files.

  3 fix the permissions and cleaned all caches.

  4 uninstalled Font Explorer and restored the default system fonts.

  5 reinstalled creative cloud and Illustrator.

  But without success.

  Any ideas with this?

  Thanks in advance!

  Hello

  I solved the problem - the application is lost in a corrupt workspace. I trashed com.apple.dock.plist in ~/Library/Preferences and now everything works.

  Thank you

• Weird problem with enums

  Hi all

  I have a weird problem with the implementation of controls and access their values. It seems that EI is pulling the wrong values for me.

  
  As follows:

  I have

  enum { }

  SKELETON_INPUT = 0,

  SKELETON_GAIN,

  SKELETON_COLOR,

  SKELETON_DELAY,

  SKELETON_POSITION_X,

  SKELETON_POSITION_Y,

  SKELETON_NUM_PARAMS

  };

  and

  enum { }

  GAIN_DISK_ID = 1,

  COLOR_DISK_ID,

  DELAY_DISK_ID,

  POSITION_X_DISK_ID,

  POSITION_Y_DISK_ID,

  };

  And I create my fine controls like sliders and they appear

  However, in my method of rendering, the values that AE comes out is wrong.

  Suites. ANSICallbacksSuite1 ()->sprintf(out_data->return_msg, "X = %1.2f Y =%1.2f ',)

  params [SKELETON_POSITION_X]->u. fs_d. value,

  params [SKELETON_POSITION_Y]->u. fs_d. value );

  
  

  Instead of getting the values of Position X and Y in the effect control, I'm SKELETON_GAIN for X and NAN values for Y.

  
  

  Is that all that I forgot to put? AE not to complaint of the any mismatch of parameter.
  

  DOH

  This is one of those who come to you once you have posted.

  So the order of creation is too important.

  Initially, I wanted to put my POSITION_X controls and Y in the first place and thought he would keep the enum attributed honest.

  But apparently I need my order of creation is the same as the enum values.

• Weird problem dual monitor with change of colors in the image

  I have two monitors, the same brand and type, even the parameters of color and adjustments, and until this image was the same on both of them. Nothing about the monitors or color preferences, I changed, but all of a sudden I started having this weird problem. Example:

  1 here is the screenshot. I have a pure red picture, palettes and layers panel are on the second monitor.

  

  2. I'm starting to drag the window to the other monitor and ALL HOLDING the mouse button (as I said, dragging)

  

  3 and when I release the color mouse suddenly changes.

  

  If I choose window and then drag again color returns to normal. As soon as I release the mouse changes color.

  This only happens on the second monitor.

  I reinstalled the drivers graphics and also re-installed Photoshop CC 2014.

  I also changed the settings so that the picture both monitors say is the same (in double screen under windows) and there is no problem then. If I return to the extended display problems with BUGS. But as soon as I lock the computer, then connect again the problem arises again.

  Any ideas that I have to do or how to fix it?

  Hey there '60 seconds '.

  Are the two video outputs of your the same fate from the back of the monitors themselves? I had this problem some time while creating my quad-monitor put in place with several types of outputs and how it can be frustrating!

  If they are the same outputs, I think you might want to try a lead to ensure that only one you currently use that creates color strange question is not defective.

  I hope this helps!

  Daniel

• Lenovo N100 0768 DKU: Laptop keyboard Windows XP - weird problem

  Hello
  I am facing a weird problem. I've done several virus scan using Norton, CA e trust and other software but no virus / malware has been detected.

  The problem, I do face is: if I press a key on the keyboard the typed value is something different. :

  one--> key typed value az

  s key--> typed value \sz

  key d--> typed value dc

  key f--> typed value vfg

  key g--> typed value vfg

  key:--> typed value hjm

  key j--> typed value hjm

  key k--> k, typed value

  l--> value typed key l.

  key,--> value you enter ';-

  key Enter --> value you enter is 13:48 08/15/2008 - date current system

  If I use the keyboard on the screen, I am able to type correctly. I downloaded a program called keytweak and found that the keys where not developed by any virus / malware in the windows registry.

  I'd appreciate any help to solve this problem.

  Thank you

  Pavan

  Hello

  I solved the problem. The keyboard was defective. Change the keyboard has solved my problem.

  Thank you

  Pavan

• having a weird problem with my assignment after incorporation of java

  Hello
  
  I have a weird problem with my assign activity, I use a Java Embedding wherin I access a variable and assign it some data, further in the next step when I try to assign data to the same variable affecting the activity I get an error message as below.
  
  
  com.oracle.bpel.client.BPELFault: faultName: parts of {{http://schemas.xmlsoap.org/ws/2003/03/business-process/} selectionFailure}: {{summary = not valid for the type of part.}} When you perform the operation of the entitlement, the node THIS, IS, TEST is invalid. The node named in the error message was either null, or a node-set is empty, and it was not an instance of org.w3c.Element. Check the value of the node to the line number 795 is not null and is an instance of org.w3c.Element. } .
  
  I am using soa 11.1.1.5
  
  Can someone please help?
  
  -Thank you
  Shirish

  Shirish,

  This is a bug and you will need to apply a patch for it.
  You can find explanations in Oracle Support Id ID 1194228.1.

  Arik

• The use of actionScript to speed up the video clip causes weird problems

  I use the script below to expedite a movieclip
  
  onClipEvent (load) {}
  NF = Function (); {
  nextFrame();
  }
  setInterval (NF, 1000/fps);
  }
  
  Well, a button inside the movie clip is linked to an another movieclip "parent". When the button is clicked above through the ignorant parent movieclip her stops at a pace fast enough speeds until she runs into the image tag where this clip accelerates resides in the parent movie clip, then it stops and returns to normal.
  
  Does anyone know how to avoid this problem? I know it works because there are other 3 buttons that work like a charm without accelerates using the above script.
  
  Or does anyone know another way to speed up the movieclip outside the use of the script above?
  
  Any help would be greatly appreciated, thanks in advance!

  Yuri = setInterval (f, t) starts a loop. He repeatedly calls the function f() every milliseconds t up to what a clearInterval (Yuri) is executed.

  the most common problem that occurs with setInterval() runs twice (or more) with no intermediary clearInterval(). When that happens all hell breaks loose and the swf will call the function much more quickly than expected and can not be stopped (easily) little matter how clearInterval() statements you try and run.

  to avoid this problem, the simplest method is to run a clearInterval() just BEFORE all the statements of setInterval(). It does not hurt anything (try and) clear and interval that does not exist and sometimes he'll stop the seemingly weird problems that occur with intervals of out of control:

  clearInterval (Yuri);
  Yuri = setInterval (f, t);

• Weird problems returned - cannot download/update apps

  About 8 months ago, there was a problem that a handful of us were affected by weird issues after update to 9.1 where we:

  -Cannot download or update applications (circle just spins and spins)

  -could not stream from Apple music

  -could not access our account iTunes devices

  (referenced in the discussion: iOS 9.1 causing app store issues or Apple music works do not on iPhone 6 after iOS 9.1)

  After lengthy discussions with Apple engineers, it seemed something on the necessary backend correction and all of a sudden everything was still... until last Friday.

  The problem is back on my phone (so oddly once my iPad and other devices of family seem to be affected so far). All of a sudden my updates to the app store will show that everything has to be downloaded, or disappear all my previous purchases. If I try to download anything, I get a circle of rotation without end. music streaming stops.

  A reboot of the phone to fix it, but the problem will return, sometimes an hour, sometimes several hours, but it always returns. I also tried to reset my settings if network wherever it touched. Did not help.

  Anyone?

  Try to reset the App Store:

  Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. Then sign out of the iTunes Store (in the settings).

  Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.

  Then reconnect to the iTunes Store.

• Weird problem with headphones Jack Bootcamp

  I searched many forums / tried many things before coming here, but for some reason - probably for the first time I don't see my problem on Google.

  The question:

  Every time I put in the helmet, they show only disconnected in Windows on Mac OS X 10 with Cirrus pilots. Sound continues to play on the speakers. This problem wasn't there yesterday and randomly began today.

  Results:

  1. it is not a hardware problem: headset works perfectly on Mac.

  2. it is probably not a Windows problem: when I install Windows drivers by default, the headphones ARE recognzied (!) (this I do by uninstalling Cirrus and restart the Mac). Of course the audio does not play not (or through speakers or headphones) because these drivers are not used to a Macbook Pro.

  3. drivers are not exceeded - just downloaded software support of Bootcamp and re-installed windows.

  Conclusion:

  It is most likely a problem with the driver for Cirrus, which is weird, because I assume that there is already a forum about this if there is (although someone should be the first I guess).

  I have no idea what to do - Apple support cannot help, Cirrus doesn't have a lot of support and it is not a problem with Microsoft (I guess), the only solution I can think of is to find another driver, which I can't find.

  If anyone has a solution or even a certain direction to a solution as possible, it will be very useful!

  Found the problem: Windows does not recognize the headphones with 1 side does not, no wonder there is no one else with this problem lol.