Welcome campaign: Direct segment or decision on Member of filter?

Similar Questions

• How to filter a segment 50-50 randomly

  I was invited to divide a segment in two tests due to a campaign of several steps, and after searching the filter options, I can't seem to find a solution.

  I tried to use split all addresses beginning with electronic < m but can't understand how shoehorn logic and I don't know, it shouldn't be difficult, anyone able to help me?

  Thank you!!

  You must first create a shared filter. In the filter, you must have the following criteria:

  

  It will share ABOUT you segment in half... he won't be sharing exact but close enough. Once you enter this filter in your campaign, set up your 2 emails like this:

  

• Related custom object records the Segment export view

  Hello

  I have records history of purchases in Eloqua-specific custom objects.

  These records are related to contacts.

  When I create a segment, I have the ability to filter the contacts based on the data stored on these custom objects.

  I want to export all the records in the custom objects related to all the contacts in the segment view, I can do?

  Hi Ofir,

  There is no way to do it directly from Eloqua. Segments will allow you only to view Contact data, and there is no equivalent way to custom segment object stores the data. To generate this list, you will need to export all history of purchase of your custom object records and then cross the two lists to identify records of custom object related to the Contacts in your industry to export all the contacts from your Segment view.

• Allocate the value of the Member in a fixed child member

  Dear gurus,

  I have the scenario where I have more than 500 members of the parent in which data is entered in the 'Member' and then need to always refer to only "member_input" child of it (member_input is a member of the sheet,

  but he has several brothers and sisters who are parents themselves). If I could use a generic code by which I can send data to fixed member, it would much reduce my code.

  
  

  So, if I entered the data to Mem1 than 50, then he must be pushed to mem1_input than 50 and like wise for other members. But I am not able to use any function to directly allocate data of fixed member under parent who has the suffix.

  I tried to use the @concatenate function in Fix & error "not a CALC command [@Concatenate].

  (@Concatenate ("Member", '_input')) = 'Member '.

  THX

  Try @Member (@Concatenate ("Member", "_input")) = 'Member '.

  Sree - mougel

• E-mail sospetta che più

  I just received the following email sospetta che più. the tanto per informare community pubblico. E. B. 01/04/2016 Dear client, Grazie I nostri recent news di sicurezza e diversi attempts di frode in 2015 (anno della prevenzione delle frodi) individuals necessario che TR should verificare i company dell' che abbiamo file by assicurarsi che sul account it servizio online no e hold off. VI preghiamo di confirm e aggiornare I vostri dati oggi Speaking saluti, Apple Clicca confirm by Come faccio an e non sapere che questo e-mail by spam? E-mail spam tendono di avere di it soggeto: "Caro needs Apple." Email from Apple are always directly to voi come a member, Dick he [email protected] . By sapere di piu di known spam further information known phishing. Where to shop | How does the Apple | Retrieve your password or Email | Contact us Copyright  © 2013 Apple. All rights reserved. Notice to consumer: Apple Pte Ltd, the owner of the Cartasia ' ¢ payment stored value facility, does not require the approval of the monetary authority of Singapore. " Consumers (users) are advised to read carefully the terms and conditions . Please do not respond to this e-mail. We are unable to respond to requests for information sent to this address. For immediate answers to your questions, visit our Help Center by clicking on 'Help' at the top of any PayPal page.

  You are right. It is a phishing message. See these resources:

  Identify the fraudulent email 'phishing '.

  Identification of legitimate emails from the iTunes Store

  Phishing and other suspicious emails

  The last of them includes information about the transmission of the original message with headers to Apple to [email protected] which, it was hoped, they could use to take down fraudulent Web sites.

  Hai ragione. Di is a di phishing message. Vedere queste risorse di supporto:

  INTALLATION delle email fraudolente a purpose 'phishing' - Apple Supporto di

  Recognition dei messaggi E-mail legittimi places dall'iTunes Store - Supporto Apple

  Phishing e altre sospette E-mail (Machine da Google)

  Ultimo include this information riguardante trasmissione del original message con intestazioni di Apple a che [email protected] , if spera, if it could utilizzare per abbattere I siti web fraudolenti.

  Machine da Google

  TT2

• How do I instantaite a C++ in Teststand object?

  Hello everyone,

  I would like to know if it is possible to instantiate a C++ object and use its methods in teststand.

  I searched in the examples and all the DLLs were developed as a normal dll (no object).

  I know it's possible in c#, but I have not found an example in C++.

  Thanks in advance

  There is no way to directly call of non-static member functions, but you can write wrapper functions or static functions around the members you want to call and make the C++ instance to passed as a parameter (you can store pointers in the variables of object reference in recent versions of TestStand, however, you must manage the allocation and removing the objects).

  -Doug

• Why doesn't control parental MS show zero (or scratch2cash) in Restrictions of App list that prevents me from setting to 'Allow' app for my child?

  MS parental control blocks the child from scratch, encoding software but I can't put it to "Allow" as zero (or scratch2cash) application is not indicated in the list of Restrictions of the App.

  I am running Windows 7 64 bit.

  Recently downloaded scratch2cash and it can work under my usual login i.e. parent. Scratch2cash appears on the desktop when my daughter connects but requires parental consent when she double-clicked on it. I welcomed access directly on the screen using my password to allow access that scatch2 does not always work. I have also connected to Family Safety to define application scratch2cash.com on 'Allow', but as above it does not appear in the list.

  It's to do with other restrictions, that I set as follows?

  Web filtering - value: can see sites and websites suitable for children on the green list. Note that Google browser is disabled at the moment.

  -Time: off

  Restrictions of App - value: can use many applications with a few exceptions.

  Store Windows and set - value: can use of games rated 7 +.

  Would appreciate help please.

  Thank you.

  Hello

  You could deal with this problem due to the filter you defined, I suggest to remove the filter for the apps and check if still face you this problem.

  Let us know the status of the issue.

• Industry tracking database health

  Our marketing campaigns are segmented by the industries that we serve (i.e., Auto, Finance, insurance, etc.). Is it possible to run the database industry health report? I want to understand the health of each database in the industry. Thanks in advance!

  Hi Jessica,.

  I'm sure that's not available 'out of the box' with the license to the standard level. That being said, don't forget that with Insight Analyzer, you can build your own custom reports and dashboards, so you would be able to build exactly what need you! We have a class Eloqua University (if you hold a subscription of education) called Eloqua10 Insight for scanners that will give you a taste of the license of the Analyzer, or you can view the the specified item was not found. in the Documentation Library products Know It . If you want to switch to the license of the Analyzer, you want to connect with your account representative to Eloqua.

  Hope that helps!

• LIGHTROOM 5 - resized my original JPEG when exporting

  Here's my problem - I did a photo shoot yesterday and the day before. When I imported the photos, I inadvertently sent them the wrong drive (i) - which is my backup disk rather than (d) my drive to work.

  Since then, I tried 1.) import them to the good drive (d :)) 2.0 export the player OK (d) - but when I did they were possibly set for display on the web and then resized to small format JPEG.)

  These, I can't use change in lightroom or view effectively even properly.

  Have tried to move the files on the drive, I am not allowed to because they exist already - same with the export of the corrected files. I simply go MAD after 12 hours trying to solve this simple problem!

  Anyone with a viable suggestion will be appreciated. Please try to be useful though - I think I tried the BASIC solutions and would welcome a direct method to solve this problem.

  I think I still have the original on my camera cards - and would be happy to delete exerything and re import if there is no insurance, it would be a solution that worked.

  Thanks in advance

  Tim

  You just need to drag and drop files from the wrong place to the desired location.

  If you need to move only a small number of files, you can do this from the 'files' Lightroom Panel.

  If you need to move a lot of files, you're better off moving them using your OS tools (finder or explorer) and then "move" the file in LR.

  Importing files a second time, it is never the right answer.

• Con ISA Server while Red VMWARE Server 2

  Hola Foro... paso a form el problema as tengo, quiero hacer funcionar an ISA server con UN ADSL (2 while RED, y LAN WAN)

  Esto lo quiero hacer con a HOST VMWARE SERVER Windows 2003 bajo, red HOST tiene el 2 while

  1 LAN (red interna con DHCP)

  1 WAN (ADSL Modem)

  Como puedo hacer para that the WAN solo tome del IP ADSL modem?

  Se you can hacer esto con VMWARE SERVER?

  No tengo good claro todo el tema no redes office, bridge, the host-only, etc. want help me podrá a resolver este problema?

  Desde ago thank su ayuda!

  PD: the idea in a futuro no muy lejano are add mas while al physical RED HOST connect 1 ADSL o mas para enlace an Internet.

  Standards organizations.

  Hola Guson,

  MI primera mid-week're Instalar ESXi (free) donde estas Running Windows 2003 con VMware Server, dado para el tipo tasks than estas queriendo perform lo veo mas robusto y seguro.

  Sober crearias UN vswitch0 donde poner una placa para management ordered ESXi console y lan. In el segundo vswitch colocas segunda placa a modo DMZ.

  Luego creas una vm con back while y colocas una in cada cada vswitch portgroup.

  If going to por the opcion of VMware Server.

  ACA you paso UN link muy bueno para veas rapidamente networking.

  http://www.carbonwind.NET/VMware/VMwareServerNetworkingOptions/VMwareServerNetworkingOptions.htm

  I think the config seria, put both while bridged, en mejor y una conectarla al modem adsl, the other campaign directly has the LAN.

  CREAS una vm, y the POWA of the DMZ the sober colocas vmnic that is located in the DMZ, then the other campaign placed the sober colocas the LAN.

  The Plaça of the DMZ the dejas in DHCP, the Plaça of the LAN IP fija das.

  Should funcionarte ok.

  Saludos

  Diego Quintana

• A general error occurred: could not connect with the password of administrator of vim cannot configure VIM account on the host

  Community salvation.

  Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...

  A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.

  Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found

  I searched and found several articles with similar questions, so I chose a course of action

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1007132

  http://communities.VMware.com/message/1168241

  As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.

  So - my first actions were to disconnect and reconnect one of the hosts.  The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.

  Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.

  Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.

  If - goes here - any ideas? I can give other details or screen caputres

  ESX3:

  #%PAM-1.0

  1. Automatically generated by esxcfg-auth

  /lib/security/$ISA/pam_unix.so account required

  AUTH required /lib/security/$ISA/pam_env.so

  AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok

  AUTH required /lib/security/$ISA/pam_deny.so

  attempts at password required /lib/security/$ISA/pam_cracklib.so = 3

  shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok

  /lib/security/$ISA/pam_deny.so password required

  session required /lib/security/$ISA/pam_limits.so

  session required /lib/security/$ISA/pam_unix.so

  ESX4

  #%PAM-1.0

  account required pam_per_user.so /etc/pam.d/login.map

  AUTH required pam_per_user.so /etc/pam.d/login.map

  /etc/pam.d/login.map pam_per_user.so password required

  /etc/pam.d/login.map pam_per_user.so sign in required

  -KjB

• Dimension HSP_Rates

  Hello
  
  By my knowledge, exchange rate table rates are present in HSP_Rates dimension. Now, I want to see the rates in HSP_Rate_USD and so on. I have the underside of dimensions in the application.
  
  Account
  Entity
  Currency (curr statement is GBP)
  Scenario of
  Period (Dec)
  Year (FY10)
  Version
  Department
  
  In each dimension, he is member of "" as "any entity".
  
  Can you please let me know what would be the member selection in excel add-in to query the value of the frequency?
  
  Thank you.
  
  Published by: user13325223 on December 22, 2010 14:55

  user13325223 wrote:
  I used all members as you mentioned and for the entity, Version, currency, Segments, I used any member of level 0, but the value is not retrieved. Don't have I selected the right

  It is the top level not level entity Yes 0, Version, currency, Segments

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• [Issue] [CS5] With the help of. send() and some other questions

  Hi guys in these last days I made research Stratus in CS5 hoping to be able to reproduce some kind of multiplayer game of him. The main problem that I ran in use. send(), I can't understand how to use the correctly. This is what I understood would work, but it doesn't seem to register that something happened:

  var myString:String;

  function sendmsg(2) (event: MouseEvent): void
  {
  myString = textInput.text;
  outgoingStream.send ("msg", myString);
  }

  function msg (myMsg:String): void

  {

  myLog.text += myMsg;

  }

  Any help to do this would be greatly appreciated.

  Just a few small questions about Stratus I want good answer:

  1. Use. more faster/more efficient send() then post where a fraction of a second account (sending players positions) where there are 4-8 people?
     
  2. When you use a NetStream with an attached how GroupSpecifier know when a person has joined or left?

  Note: All questions are regarding the CS5, not Flash Builder as I am not very aware if there is any difference in coding.

  NetStream.send () should generally be faster than NetGroup.post (), especially when using NetStreams 1:1 (vs. Group NetStreams).

  When groups are great, there is no average liabilities to say when members join or leave.  However, for small groups (less than 15 members), they will be "full mesh", meaning that each Member is a direct connection to every other Member.  When this is the case, you can see the events of NetGroup.Neighbor.Connect/Disconnect on a NetGroup.  to receive people, you create a network group with the same groupspec than your NetStream and listen for events from NetStatusEvent.NET_STATUS.

  your "msg" function must be a method on the 'customer' object of the NetStream subscribed to receive the NetStream.send (s) of the editor.

  It's all generic ActionScript stuff.  I don't know how to use Flash CS5, but such things should all be the same in Flash and Flash Builder.

  -mike

• in function form security

  Hi all
  
  I am able to use HTTP basic security in my application, but when I use the security form and use the wizard to create login.html, error.html and welcome.jsp it does not work. After the login screen I get an error saying not ALLOWED of webpage.
  
  I only use authentication and created a user USER1 and added to the role of test-all.
  
  Thank you
  Mayank Beri

  Have you tried to run the welcome.jsp directly and see if that helps? (She in turn will redirect you back to the homepage and login after successful authentication).

  Arun-

• Where is the setting to warn that "the information you entered must be sent over an unencrypted connection?

  Where is the setting to warn users to "information you entered must be sent over an unencrypted connection"?

  The settings for warning messages have been removed from the UI (Bug 513166).
  You must change preferences related security.warn_* directly on the topic: config page.
  
  Filter: security.warn

  You can check the security.warn_submit_insecure pref on the topic: config page.

  BTW: Firefox 10.0.3 ESR is not the last.

  • ESR 10.0.x Firefox: http://www.mozilla.org/en-US/firefox/organizations/all.html