WEP encryption key do not forget when you restart the Equium M50-244
I use a laptop Equium M50-244, with a BT Home Hub 7838 wireless router. Almost everytime I turn on the laptop it has no wireless connection. So I have to go to control panel, network connections and that he can find a new connection.
I would then type the key to encryption WEP number twice to get a new connection.
This is obviously a long procedure, so I need to get the laptop to recognize the encryption key and save it for the next time I turn on.
I am running Windows XP Home Edition with Service Pack 2 and a Norton Anti Virus and Firewall.
Any help would be appreciated
Peter
Hello
I agree with Louis. Your WLAN cards support WPA encryption and, if possible, you should use it.
Anyway: try to Setup WLAN to use Windows settings and set WEP password we remind for your WLAN. I have the set up on a lot of laptops different and after choosing the publicly traded WLAN password has already been set and the only thing that must be done is to click on the Connect button.
Tags: Toshiba
Similar Questions
-
STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.
Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please
Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.
Solution:
1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.
2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)
3. type: BATCH spuninst.txt
4. type: exit
Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.
-Tom Steele
http://www.hawkandtom.com Tom Steele -
Acer toggle display does not display when you use the Fn + F5 key secret on my Acer Aspire 5560
What it does:
When you use the Fn + F5 key combination on my Acer Aspire 5560, it brings up a screen changes on the laptop screen for the selection of an external monitor, I am currently using Windows 7 Ulitmate
Before the problem:
Display mode switch Acer existed prior to the upgrades of the drivers
The problem:
The toggle screen Acer does not display when you use the Fn + F5 key secret on my Acer Aspire 5560?
Additon Information needed to solve the problem or any other information:
I would like to know what driver or software operates the Acer toggle display Mode?
Also where can I find this driver for computer: Acer Aspire 5560 to bring this Acer toggle display Mode function?
Acer Toggle display Mode: this is a picture of it when you use the Fn + F5 combination:
Thank you very much Ironfly Ace, it has worked Acer hero of the day
-
Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
Keyboard is fine. Is this a compatibility issue?---------------
-
Hello!
The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do?
Also says that I have no access to this service. For access, please contact your COMPUTER administrator or connect using the ID
Hello
Greetings!
Is Typekit on?
Visit this link: Add to your desktop of Typekit fonts
Concerning
Jitendra
-
How to freeze the layers and block them so that they do not appear when you open the file?
How to freeze the layers and block them so that they do not appear when you open the file?
You can set the Initial State of the layers as hidden.
The game, 18:09, kathya97643775, [email protected], 8 October 2015 >
-
SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.
I can open the SG of start menu/desktop computer and I can open the PP project in SG very well. The PP project contains 3 deadlines and I take one I want without any problem. Returning to the SG PP works fine as well. It seems only thing doesn't work does not automatically open the PP file and selecting the correct timeline in the Official Journal of the project.
I had a glance at the "C:\Users\john Bishop images\AppData\Roaming\Adobe\SpeedGrade\8.0\logs\SpeedGrade.log ' but it is not updated when I try to use the link Direct from PP. command It updated when I invoke the start menu/desktop computer SG. Note that none of the other newspaper, the files are updated either (Plugin Loading.log, Database.txt Trace and Debug Database.txt). All these get updated when I run the desktop/start. It would appear that SG is not yet known.
I uninstalled the SG and the PP and re-installed (all in the directories by default) and everything seemed to go OK but no change.
I also added 2 political profile the NVIDIA Control Panel, just display a message when loading SpeedGrade.exe and another for a slightly different message when loading SpeedGradeCmd.exe. SG invoking the desktop/start causes the SpeedGrade.exe message to display. Using the 'Direct link' PP file option does not display anything, reinforcing my thought that SG is just never called from PP.
SP1 Windows 7 Professional 64 bit
12 GB OF RAM
2-Intel Xeon E5640 (16 sons) processors
NVIDIA GeForce GTX580 1536 MB memory graphics
PS... I used the Adobe cleaning tool noted elsewhere and tried NVIDIA workarounds as well - all to nothing does not.
Problem solved!
My Antivirus software was in the way. Once I have updated, things work fine.
Thanks for your help!
-
Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.
If she don't remember: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports
-
new tab does not appear when you press the button "open"
A few days ago I suddenly can not open a new tab when you press the button open tab , press file-> open the tab, or Open the tab button next to a tab...
Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.
There are a few places to check for the Ask toolbar:
- Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
- Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons
-
Satellite A100 - line number on the keyboard does not work when you enter the password
I have an A100 / Pro A100 series satellite laptop, what ever that means.
Anyway, when you turn the laptop on and asked for a password, I am unable to put in number.
It appears to the integer line, including BACKSPACE don't work.I can use the mouse to select and remove, but that leaves a mark of character in the password box.
Other buttons work except the row number.If I need to connect an external keyboard to verify where I connect (if I can)?
Any help would be great.Can I change the keyboard?
Hello
trying to connect a keyboard external usb to check it out. Yes, you can change the keyboard of laptop and it is not a complicated procedure.
Details how to change keyboard, you can find hereirisvista.com
Welcome them
-
Why Satellite Pro A300 does not start when you press the power button?
Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.
In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.What should I do to get a normal departure procedure?
When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.
When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
The same thing happen on my Satellite A300. -
I have HP Pavilion a6030in, my pc does not start when I press the power button / stop ther, but she starts automatically after some time after that, it works fine.
Even once when I closed and leave it for a while and still the problem is not resolved.
Help, please
I solved the problem
-
PC disconnects the VPN after several hours, can not reconnect until you restart the PC.
Hello
I started to use a VPN private for a video game in general since last month, but I started to run into a problem, I can't fix... my PC tends to disconnect the VPN after awhile (6 ~ 12 hours of use?) and I can't reconnect to any VPN until I restart my PC.
However... my normal internet connection seems to work very well.
When I try to reconnect to the VPN after I fell, I'm greeted by this error:
http://PUU.sh/bicqT/0a6f1f8537.PNGI'm on Windows 7 64 bit and I use the VPN client by default windows... idk what's his name, it's putting you in the network and sharing Center.
I tried the following things:
* restart the network map
diagnose the issue with windows network diagnostics 7
* / Clear DNS cache
* / release and / renew lease
* reset the internet connection
* using the internet connection of a neighbor and I am still unable to connect to any VPN until you restart the PC.-diagnosis after disconnecting from the VPN wireless adapter arrives leads to this...
http://PUU.sh/bibQs/9873c02068.PNG
http://PUU.sh/bibn7/93ec6f0934.PNG
http://PUU.sh/biboF/3c9f865f15.PNG
http://PUU.sh/bibpw/b204c59f01.PNG
http://PUU.sh/bibq9/a10d3246d1.PNGI can't fix it through diagnostics.
In any case, this is a problem on my end because I share the VPN with 2 other friends and they do not suffer this problem... > _
If there is a lack of information, please tell me and I will provide.
Thanks for any help!
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
TechNet Forum
http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itproHope this information helps.
-
T440s - keys alt and space do not work when you press the up and left arrow
Hi all -
I just got my T440s a few weeks ago and I love it. I just discovered a weird problem: both alt keys and the space bar don't work when holding the up arrow and left the keys simultaneously. I discovered this while playing a racing game. As holder until left and arrows, by pressing the alt key or the space bar to have no effect, and the laptop makes a sound 'blip '.
All other keys seem to work all by holding + arrows left and rising + right arrow key does not change a thing.
I looked at the ease of access settings (I have Win7 Pro 64) and turns off all filters, sticky keys keys, etc. I use the latest version of the BIOS, if that's any help.
It's a little boring, so I'd appreciate any help. Thank you!
https://en.Wikipedia.org/wiki/Rollover_%28key%29#Key_jamming_and_ghosting
Will probably not not to be repairable. Recommend rebind the keys for a game of combinations work.
-
internet activation key does not come when you buy a computer
I installed mcafee on my system, however e computer has detected Trojans and worms, he asked me to remove them I agreed, but what is worrying is that the internet protection, i.e. to request an activation key and to get his ky I need to buy, my question is really, why when I scanned my pc with mcafee It has not detected any viruses, but still a message keeps popin telling me to kill a virus, how do I get rid of this and what is an activation key and whyhavent mcafee detected viruses
Hello
you are infected with malware
an anti-virus do not find anything
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Maybe you are looking for
-
confirmation letter you sent back twice and it does not appear on my yahoo account
I created a Thunderbird e-mail account just to use only once for a project. He took everything on my yahoo Inbox, as well as a lot of junk and put it in the Inbox of Thunderbird. Then I closed the window and now do not know how to get to my Thunderbi
-
X 301 diagnosis: bad Mobo or just KB/screen?
Just give an old X 301 (surprisingly, the first time dealing with this model) and was told by the principal that they believed that the mobo was bad due to overheating and the KB and the screen didn't work. Well, not sure how tech-savvy, they were, w
-
Monitor HP 650 G1 is generic list pnp - I need more resolution of 1366 x 768
Hi Forum I discovered that my HP 650 G1 is exposed generic pnp. I need increase this to more than x 1024 768 x. This is because some site is displayed correctly if it is less than x 1024 Help, please. Thank you Michael
-
I'm in a similar situation but want to know which class SD card is necessary. Should be class 10 or speed is not a problem with this device?
-
I need to transfer my docs from old XP to format external drive to new computer Vista.
This XP formatted external drive is partitioned into several directories. They stored the files wmv, songs, photos, etc. When I plug in USB, Vista computer said that it has found the driver DEVICE USB IA37L080ATVC07-2. But this hard drive storage has