What damage would result of the use of inkjet paper in a laser printer

Similar Questions

• What plans are available for the use of the storage cloud at adobe. What is the authorized space if I free plan.

  What plans are available for the use of the storage cloud at adobe. What is the authorized space if I free plan.

  Thank you

  Agoutin

  Hi rajthkr,

  Acrobat.com offers free online storage for up to 5 GB of data (there are on the plans at this time to provide additional storage for a fee).

  Best,

  Sara

• my computer has sent me a message system error dthtml.exe what I would do. or the computer denies me ijl15.dll is missing from my system

  My computer told me that is missing on my system or systems error dthtml.exe ijl15.dll.

  Thanks, Kassie

  Hi Kassie,

  (1) what version of Windows are you using?

  (2) what is the complete error message you receive?

  (3) when exactly you get this error message?

  If you run Windows Vista or Windows 7 on the computer SFC scan and then executed.

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• What pen would work with the touchsmart pc (TouchSmart 610-1031)? any recommendation?

  I like the table (or digital pen) would work on my smart touch computer (610-1031F).

  I would like to use for drawing/painting...on especially the touch screen and writing.

  I saw the small number of products HP online.  They don't really explain a lot... and I can not really compare how these products work differently. They show the compatible products and I am not sure that they only work for the specific products or prodect smart touch in general.

  http://h20386.www2.HP.com/CanadaStore/product.aspx?hpproduct=KG517AA

  http://h20386.www2.HP.com/CanadaStore/product.aspx?hpproduct=VX406AA

  http://h10010.www1.HP.com/wwpc/za/en/Ho/WF06c/A1-329290-69998-329269-329269-3757222-496097.html

  http://www.Amazon.com/HP-digital-pen-eraser-PL800A/DP/B0009ME7FI/ref=cm_cr_pr_product_top

  any recommendation?

  I'm oepn of any product will work with my pc.

  Sotra wrote:

  Is there a way? certain parameter? or stylus?

  No, as indicated above a pen would change nothing, you want to really does not work with this method of contact, there is no definition that will never make these "touch sensitive" this touch detection method is great for many reasons, but it won't replace something like a Wacom tablet for drawing.

  You really want a tablet that uses a touch of pressure, not a desktop Touchsmart.

• Is it possible to get the result of the use of several blending modes in a single object?

  Hello

  I wonder if there is a way to merge multiple objects with methods of fusion to an object. Here is the example:

  

  With the mark on the left are three objects with the same appearance but different modes (normal, overlay color dodge,) on the right they are overlapping, fusion, which are always three oppose. I am looking for the way to get the same result that law rode one, but as a single object. Him with several objects only to the result of color blending mode uses too much memory for my computer.

  Thanks in advance for your help.

  Create an object: then in your appearance Panel, duplicate the fill twice. Select the high fill and expand the submenu, click the opacity, choose the blending mode. Repeat steps.

  G

  

• which would result in the inability to control my mouse?

  It worked fine, then all of a sudden my mouse went wild. It moves in all directions. I couldn't control

  with my mouse or my pad. Finally, have had to close, then restarted and did it again. So using the off button

  lower left and yet once off for a few minutes. Now work right - more or less.  This could be the cause for it?  I have turned off sharing.

  I delete cookies several times a day so no one can follow me, or place cookies unwanted or plug-ins on my computer.

  It's jumping around even now when I am not touching anything.  It is very difficult to write because pointer keeps jumping around.

  opening of things and moving it to the bottom of this page or as much as * like it. HELP PLEASE.  Thank you.

  Bluetooth devices no longer meet

  Sources of interference Bluetooth

  Sources of interference of Bluetooth (2)

  \

  If your Wi - Fi connection is able to generate a 5 GHz signal, try this.

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• Please what can I do with the 5,157,61 on my Canon MG6350 printer error code?

  I have another router and now I have problems to scan documents on my type of printer MG6350. I'm getting the 5,157,61 error code.

  What is the problem and what can do?

  Thank you very much for your support.

  Misco25

  Do you have your new router in the printer itself yet entered information?

• I'm looking for a software that can track the use of the software. No spyware, I just want to know if the investments are indeed worth

  Invest US heavily in certain types of software (by request) but have little or no in order to see if it is actually used after purchase.  I'm looking for a way to track 'time-used '.

  Hi schellekensr,

  Unfortunately, there are no Microsoft software to help you accomplish what you want.

  However, you can search online by using your favorite search engine and see if there are any 3 Group software that can help you accomplish the same thing.

   

  WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• I get an error on the use of registry cleaners on the computer.

  Original title: PLASRV does not exist in the registry

  Registry cleaner detects plasrv in windows/sys32 but reports that there is not. Can not solve the problem and can not remove. Report picks up 400 + files no that does not exist!

  Hello

  Thanks for keeping us posted and share this information with us.

  To add to the suggestions of tetraethyle3, I would like to add that registry cleaners, sometimes delete the registry files as well. The computer might end up in a State no boot as well. It is strongly recommended that you do not use these settings on the computer.

  NOTE: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Instead, you can use-

  http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• Determine the use of vCPU using PowerCLI

  Is there a way to determine how many vCPUs uses makes it a virtual machine using PowerCLI?  For example, suppose you try to size just your virtual machines with powerCLI.  If the virtual machine uses several threads, it can use the multiple vCPUs.  If it is mono-thread, it can only use one vCPU even if she has a high workload.  You can determine what virtual machines have multiple vCPUs but use less than they are allocated?

  As much as I know there is no meter that indicates if a core is used or not.

  What you could do, is the use of the CPU, and then check if the assigned processors are required.

  For example, suppose that the average CPU usage is 25%, and the maximum is 50%.

  If this VM has 4 processors assigned, you may deduct 2 CPUs would be sufficient.

  But this isn't an accurate calculation.

  Once you lower the processors assigned to the virtual machine, you will need to see if there's an obvious increase of the ready time.

• The use of Teamviewer for remote access to another PC from a PC

  Hello

  I have TWO PC, but unfortunately two PC has the same IP I checked ipconfig.

  I called ISP regarding on the same IP between two PCs.

  Is it possible that a PC can access second tool PC remotely using the Teamviewer software, even if TWO PC IP addresses are the same now?

  Your comments will be appreciated.

  Thank you

  Hi Altman,

  TeamViewer is a third party software. For support on the use of this product go to TeamViewer Support Center.

  Note:   software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Service of any necessary repairs as a result of using expired ink or HP Photosmart D7260 printer

  I use Windows 7 64-bit.  I changed two inks this morning, a black and a blue.  Blue ink was very good.  Black ink error said, "Printer service for necessary repairs as a result of the use of ink expired."  I bought all the colors of the ink at Staples only a couple of months.  So, I hated to do it, but I opened another black ink and installed, and I get the same message.  Because of this message, I can't print anything, and I can't get beyond the error.

  Hey there jverzola,

  According to this article:
  http://support.HP.com/us-en/document/c01427780

  Try to remove and replace the cartridges in place until the error disappears. You can also check if there is dried ink or any debris in there that could cause a problem.

  I hope this helps!

• Monitoring the use of telepresence MCU ports

  Hi people,

  I have a MCU4501 with 12-port HD. I wonder what a way to monitor the use of ports?

  Thank you

  Chenzhe

  See this thread: mcu-5320-port-use-report

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Advances of paper but will not print using Windows XP, computer HP Pavilion DV6000 CTO laptop and HP PSC 2210 all in one with USB

  Communication takes place properly between the printer and the computer.

  Paper advance but not printing on the page.

  Printer copies fine.

  Pilots are underway.

  Help, please!

  Hi GraceWolf,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists.

  Printer in Windows problems

  Hope the helps of information.

  Please post back and we do know.

• Shouldn't be using WITH return the same results as if you would first put the results in a table?

  First of all, here is my version info:

  BANNER

  --------------------------------------------------------------------------------

  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production

  PL/SQL Release 11.1.0.7.0 - Production

  CORE Production 11.1.0.7.0

  AMT for HP - UX: 11.1.0.7.0 - Production Version

  NLSRTL Version 11.1.0.7.0 - Production

  I just re-read the documentation of the subquery factoring clause of select again and I saw no restriction that applies.

  Can someone help me understand why I get different results?  I would like to be able to use the statement that creates spades3, but for some reason it does not work.  However, when I break up and store the last subquery TMP in a table (MAT1), I am able to get the expected results in MAT2.

  Sorry if the example seems a bit esoteric.  I tried to put something together to help illustrate another problem, so it was more convenient to use the same instructions to illustrate this problem.

  drop table mat1;
  create table mat1 as
  with skus as (
    select level as sku_id
    from dual
    connect by level <= 1000
    ),
    tran_dates as (
    select to_date('20130731', 'yyyymmdd') + level as tran_date
    from dual
    connect by level <= 31
    ),
    sku_dates as (
    select s.sku_id,
    t.tran_date,
    case when dbms_random.value * 5 < 4
    then 0
    else 1
    end as has_changes,
    round(dbms_random.value * 10000, 2) as unit_cost
    from skus s
    inner join tran_dates t
    on 1 = 1
    )
  select d.sku_id,
    d.tran_date,
    d.unit_cost
    from sku_dates d
    where d.has_changes = 1
  ;
  
  
  drop table mat2;
  create table mat2 as
  select m.sku_id,
    m.tran_date,
    m.unit_cost,
    min(m.tran_date) over (partition by m.sku_id order by m.tran_date rows between 1 following and 1 following) as next_tran_date
    from mat1 m
  ;
  
  
  drop table mat3;
  create table mat3 as
  with skus as (
    select level as sku_id
    from dual
    connect by level <= 1000
    ),
    tran_dates as (
    select to_date('20130731', 'yyyymmdd') + level as tran_date
    from dual
    connect by level <= 31
    ),
    sku_dates as (
    select s.sku_id,
    t.tran_date,
    case when dbms_random.value * 5 < 4
    then 0
    else 1
    end as has_changes,
    round(dbms_random.value * 10000, 2) as unit_cost
    from skus s
    inner join tran_dates t
    on 1 = 1
    ),
    tmp as (
    select d.sku_id,
    d.tran_date,
    d.unit_cost
    from sku_dates d
    where d.has_changes = 1
    )
  select m.sku_id,
    m.tran_date,
    m.unit_cost,
    min(m.tran_date) over (partition by m.sku_id order by m.tran_date rows between 1 following and 1 following) as next_tran_date
    from tmp m
  ;
  
  
  select count(*) from mat2;
  select count(*) from mat3;
  
  
    from tmp m
  ;
  

  select count(*) from mat2;
  select count(*) from mat3;
  

  Select count (*) from mat2;

  COUNT (*)

  ----------

  31000

  Executed in 0,046 seconds

  Select count (*) in spades3;

  COUNT (*)

  ----------

  0

  Executed by 0,031 seconds

  Hello

  Khaled says:

  The problem is with

  -case when dbms_random.value * 5<>

  You can change this

  dbms_random. Value (1,100) * 5<>

  and test

  I don't know that I agree 100% with your police department, work there.

  dbms_random. Value, no arguments, returns a random number between 0 (inclusive) and 1 (exclusive), so

  dbms_random. Value * 5< 4 ="" will="" be="" true="" about="" 80%="" of="" the="">

  dbms_randon. Value (1, 100) returns a random number between 1 (included) and 100 (exclusive), so

  dbms_random. Value (1, 100) * 5< 4="" will="" be="" true="" exactly="" 0%="" of="" the="" time,="" which="" is="" not="" what="" op="" wants="" at="">

  The problem here apparently revolves around the optimizer not really call dbms_random over and over again in sku_dates of the subquery.  Add ROWNUM in the subquery seems to force Oracle to assess dbms_random.value immediately.  I don't really understand myself, but adding 1 element in the SELECT of the sku_dates subquery clause could solve the problem:

  create table spades3 as

  with references like)

  Select the level as sku_id

  of the double

  connect by level<=>

  ),

  tran_dates like)

  Select the level + to_date ('20130731', 'YYYYMMDD') as tran_date

  of the double

  connect by level<=>

  ),

  sku_dates like)

  Select s.sku_id,

  t.tran_date,

  -case when dbms_random.value * 5<>

  then 0

  1 other

  end as has_changes,

  Round (dbms_random.value * 10000, 2) as unit_cost

  ROWNUM AS r-<=== new="" column="" added="" here="" new="" column="" added="">

  s SKUs

  inner join tran_dates t

  1 = 1

  ),

  tmp as)

  Select d.sku_id,

  d.tran_date,

  d.unit_cost

  of sku_dates d

  where d.has_changes = 1

  )

  Select m.sku_id,

  m.tran_date,

  m.unit_cost,

  min (m.tran_date) over (partition by order of m.sku_id by m.tran_date rows between 1 next and 1 suite) as next_tran_date

  of tmp m

  ;

  You do not have to refer to this column anywhere; just having him in the subquery is enough.

  If someone can't understand why, I know it.