What do you use for Mrs site recovery to network solution

Similar Questions

• what OS you use for VMware Data Recovery 1.2.0.1131

  I tried all versions of Linux OS 32-bit for the configuration of the VM for the OVF, but I got the same error every time

  Your CPU is not support long mode. Use a 32-bit distribution. --

  I'm under ESX 4 and vCenter.

  Any idea?

  Thank you

  After assigning VT turned on in the BIOS, you may need to power cycle your system (power power off). A reboot is not enough.

  If this does not resolve the issue, take a look at KB1003945 - requirements Hardware and firmware for 64-bit operating systems to see if your system meets all the requirements to run 64-bit operating systems.

  André

• What do you use for deploying Windows 7 64-bit Ent regarding vCPU and RAM in your environment?

  Hi guys,.

  In my environment, we are currently running Windows 7 Ent 64-bit with 2 x vCPU and 2.5 GB of RAM.

  Everything is working fine, but recently I just got a free health check of Xangati and would like to know if there is something I could do to improve the environment.

  Essentially according to the results of the audit, I learned that I could be more indicer CPU and RAM on my desk from view.

  My host is running 16 x 2.599 GHz CPU, and according to the report once I hit the hard desk with activities (CPU maxed out at 100% for about 15 minutes), it is said that the "CPU usage" hypervisor uses only 1.9 GHz top.

  This means that a 1 x vCPU is more than enough to handle our daily tasks, so I went down there to 1 vCPU and test it hard once again by Windows Update.

  Even if the use of the "processor" said again that I didn't not max at 2.599 but use the Windows processor is maxed out.

  For me, it's like doing an update of windows on 1 vCPU is slower than when I used 2 vCPU but according to numbers, it shouldn't.

  It was the same exact situation with the RAM.

  If I look in the Windows Task Manager, Windows RAM was maxed out almost when I was doing tests, but on the side of the hypervisor, it says I'm only averaging about 1.7 GB.

  So now I'm not sure what matrix that I should go. The windows or on the side hyper-visiere? Haha.

  If I followed the hyper-visiere, I get scared when their desktop view is slow, the user could come to me and ask for additional resources, because that's what they see in the Task Manager.

  It will be hard to convince them not to worry about what the Task Manager shows.

  Note: I have no problem with the data since all desktop computers store is located in the FusionIO card.

  Anyway, just want to see it as the Deputy there to use when they have configured their Windows 7 operating system.

  Are you visiting x 2 vCPU and 2 or 3 GB of RAM? Or you would follow instead indicating you the numbers of the hypervisor?

  What would you do?

  Thank you guys!

  I feel that it is something that must be determined on a case by case.    We started with 1 vCPU which works great for 95% of our users.    We have others that require more resources while they were transferred in a different pool with additional resources.    In addition, we found that 1 vCPU works well for most everything except the video.   If you want to play a lot of video you can test with 2 vCPU and see if that works better.

  In the end, it's all about what your user comments and should dictate.   You don't want to shake your users of the resources, because that will lead to the decline in performance and the bad perception but also be careful not to approve because they will lead to poor performance and a bad perception.    Once people get a negative perception of the environment, it is difficult to cross.

• When you use Firefox, a site jumped upward and said it is Firefox search virus. He said then I got dangerous viruses and need to download a security program. It's for real? The site is update32.escmce.ce.ms

  When you use Firefox, a site jumped upward and said it is Firefox search virus. He said then I got dangerous viruses and need to download a security program. It's for real? The site has been update32.escmce.ce.ms I googled this site and it does not exist. Now, I'm worried about security on my computer.

  Sounds very similar to what I had come last week. I did not now what the site was, but I noticed that the box seems to be analysis what were the Windows system files, it could not have been real. I do not download anything either, and I think that if you have not then you are probably safe. I am far from being an expert in the field and am sure that someone with more expertise will also. I learned that the best thing to do is vacuum history of cache, cookies and remove and close the browser. Don't try not even close the box that I have read. I don't know if I did or not. I think that there is some nasty things circulating right now try to deceive us in their installation on our Macs. I agree that it's a very scary experience. I was shaking when it first happened to me.

• I'm a composer of musicals for children and do a site for my work, but am a perfect beginner in Web design! Sound application what would you recommend for playback of tracks of my musicals and how to install it?

  I'm a composer of musicals for children and do a site for my work, but am a perfect beginner in Web design! Sound application what would you recommend for playback of tracks of my musicals and how to install it?

  There is no "request" in itself, and according to which browser and the device is used, this could end by into a mess of different options of incorporation. So to save your sanity upload your files to a service like Soundcloud and use their built-in widgets and code.

  Mylenium

• What stage of treatment do you use for email autoresponder to each sender form?

  Hello

  What stage of treatment do you use for email autoresponder to each sender form?

  Thank you

  Hello

  You can use option send email.

  Thank you

  edynamic expert Eloqua

• What software do you use for mapping campaign?

  Do you have your canvas to map your campaign? Using visio? Illustrator? In the early stages of the campaign when you went through with the team and you want to provide a Visual map of campaign/flowto your management team or of administrator you what do you use?

  I use Visio and follow the same process as jennifer.gonzalez for the revision of flow with my team. It is an easy to use, too.

• What is the recommended for El Capitan recovery process?

  What is the recommended for El Capitan recovery process?

  I just upgraded directly from Mountain Lion, and I see that my recovery disc has disappeared.  My recovery disk wizard is only good for Lion and Mountain Lion.  I searched Apple.com and found a complicated process by which I could use the Console and create a bootdisk with the option reinstall, but I can't believe that this is the recommended option for a common user?

  So is time machine bygones?  I noticed that it is dimmed in the Menu bar?

  Certainly, you can restore El Capitan as you would with any other version of OS X - using the HD Recovery. I have no idea why your Recovery HD disappeared. Usually this would cause by user error. However, you can create a standalone install OS X on a USB FlashDrive for emergency use. This has been an option because at least Mavericks:

  Do your own installation of El Capitan using the El Capitan tool flash drive:

  You can create an installer of flash of El Capitan via the Terminal drive. El Capitan has its own manufacturer Installer integrated that you use via the Terminal:

  You'll need a freshly partitioned and formatted at least 8GBs. USB flash drive leave the name of the flash drive on the system by default, "Untitled." Do not change this name. Wait as the full process that will take some time.

  Open the Terminal in the Utilities folder. Copy and paste the following line in its entirety in the Terminal window.

  sudo/Applications/Install\ OS\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/Untitled--applicationpath X\ "/ Applications/install OS X El Capitan.app.

  Press RETURN, enter the admin password (will not resonate to the window) then press RETURN again.

  You must have setup in your Applications folder or change the paths in the command line above.

  You can do the same thing for Yosemite by making the appropriate substitute for the installer in the above command line:

  Make your own Yosemite flash Installer drive using the tool of Yosemite:

  You can create an installer of the Yosemite via the Terminal flash drive. Yosemite has its own manufacturer Installer integrated that you use via the Terminal:

  You'll need a freshly partitioned and formatted at least 8GBs. USB flash drive leave the name of the flash drive on the system by default, "Untitled." Do not change this name. Wait as the full process that will take some time.

  Open the Terminal in the Utilities folder. Copy and paste the following line in its entirety in the Terminal window.

  sudo/Applications/Install\ OS\ Yosemite.app/Contents/Resources/createinstallmedia--volume/Volumes/Untitled--applicationpath/Applications/Install\ OS\ Yosemite.app X\ X\

  Press RETURN, enter the admin password (will not resonate to the window) then press RETURN again.

  You must have setup in your Applications folder or change the paths in the command line above.

  In addition, to Yosemite and earlier you can try using DiskMaker X.

• What should I use for a replacement of WinMail in Windows.

  What should I use for a replacement from WinMail in Windows 7 when requires it a number of sites to meet an address or a link that the site offers an answer or a question.  I have msn, yahoo & gmail but lost WinMail when I've upgraded from Vista to Windows7.
  I lost WinMail thur a mistake some time & it was a nighmare tring to meet links on sites that requires to open a format Outlook, Outlook Express or WinMail.

  I have msn (hotmail), yaho & gmail, but none of them will come when I'm trying to respond to the link sites for a response. If one of those that should be used, how it equal in Windows7?

  Windows Update has nothing to do with the upgrade of Windows.

  Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]

  You will need to install a (e.g. MS Outlook;) Windows Live Mail; Oiseau-tonnerre) , and then set it as a default for mail in CUSTOM (<>) Set Program Access and defaults of the computer before any function article send to or MailTo will become available.

  You will find support for Win7 e-mail Clients in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

  Support for Windows Live Mail (which will be able to import your data from Windows Mail Backup), you will find in this public newsgroup:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktop

  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Windows.live.mail.desktop

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• What metrics to use for memory capacity planning? Active or consumed (in request or use vROPS)

  Hey all,.

  I was wondering once more what metrics to use for memory capacity planning. Since the information from different sources (for example your ESXi host needs more RAM to Iwan Rahabok or VMworld 2012: Session VSP1729 - virtualized memory understanding performance management - Eric Sloof - NTPRO.NL Kit Colbert) pointing all assets (vROPS request), I expect that when we have high memory consumption / use in vCenter there will be no balloon / compression / permutation.

  Also the metric active / request should not be used for all workloads (e.g. Java / DB), why is - this? I have not found the reason of this anywhere, only the fact.

  Other sources such as Mark Achtemichuk suggests using consumed/use, which is the opposite (Understanding Active Memory - VMware vSphere Blog - Articles VMware vSphere).

  So I thought I'll with active / demand as metric and ignoring the warnings inside of vCenter.

  But the last time we have fixed half of our group, we had consumed/high memory usage and the vCenter began to inflate, compress, and finally to Exchange. Not a lot but I had not expected that, because memory active was only a small percentage of consumed.

  Can someone explain to me why this happened and who is right on this issue.

  Kind regards

  jengl

  jengl I don't know if you asked the wrong question, or I give the wrong answer :-)

  It is always good to attach screenshots, background to the issues, and what exactly you are trying to solve.

  You wrote:

  So to summarize:

  -ESXi uses consume to decide when to start the recovery techniques of memory RAM

  -To rightsize VMs for RAM, you must use the counter inside the BONE, not active

  -If you do not want to commit too much RAM and have a lot of the balloon you should right-size your virtual machines or extend the RAM / buy additional servers

  Please correct me if I'm wrong.

  My answer: you are right. If you do not have access to the guest operating system, then Active VM and VM consumed are better guess. Better than nothing :-)

  Sizing sizing of VM and ESXi are 2 different things (2 use cases) different. Please don't mix up the as soon as they are confusing. Do not try to resize the virtual machine when you are sizing the ESXi, unless you have a control total on them.

  You wrote:

  The question for me is: how many cache (standby under Windows) inside the VM is really necessary for the virtual machine to get the best performance without wasting resources. Perhaps this issue can be resolved only by tests or do you know another option?

  My answer: it's a different topic brother :-) It is different, because it is within a guest operating system (Windows in this case) and is no longer at the level of the ESXi. Suggest that post you another, possibly under Windows or vSphere too :-)

• What language you use Muse? / What language uses Muse?

  Hello

  Here's my problem: web site hosting offer different offers depending on the language used (PHP, Javascript, Python...). What language you use Muse? Should which plan I choose?

  I called the support who told me that the files are in html5 and css3. But it doesn't help me on the choice of supply to choose.

  Thank you in advance for your answers,

  Solenn

  Hello

  Here's my problem: hosting website offers different offers depending on the language used (PHP, Javascript, Python...). Which language uses Muse? Which offer to choose?

  I called the support who told me that the files are in html5 and css3. But it don't did not help me on the choice of supply to choose.

  Thanks in advance for your answers,

  Solenn

  Hello

  With the help of Muse, you can create a site using HTML/CSS/Javascript coding. All the languages that you mentioned, can work on the site, but you must add them manually. We hear, once your site is ready, you can export your site in html and then you can add any language script like PHP, Python, according to your requirement, so it'll be great if you can decide what language you will use in the future and buy accommodation accordingly.

• Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.

  Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.  When I got to disk utilities to erase, and then reformat the options are

  1 mac OS extended (journaled)

  2 mac OS extended (journaled, encrypted)

  3 mac OS Extended (respect for case-sensitive, journaled)

  4 mac OS extended (case-sensitive, journaled, encrypted)

  See the information below If you can not back up or restore your Mac with the help of Time Machine - Apple Support

  When you select a drive to use with Time Machine, your Mac automatically prompts you if you need to reformat the drive.

  • If you are using an external drive connected to your Mac, use disk utility to make sure that your backup disk is formatted in HFS + extended (journaled) and is the partition type GUID Partition Table (GPT).
  • If you use a time Capsule, formatting the drive for Time Machine preferences automatically formats the drive as HFS + Extended (respect for case-sensitive, journaled) with a GUID Partition Table (GPT).

• What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  Hi, Jason.

  the only way to fix this is to talk to xbox support, if they suggest you to do something you have already been told and they will suggest something else.

  phone numbers:

  * In the United States, to the Canada or Puerto Rico: 1-800-469-9269 or 1-800-4MY-XBOX

  See also this forum account issues:

  forums.Xbox.com/.../12.aspx

  Have you tried using another browser?  Google Chrome, Firefox?

  Contact for chat

  http://support.Xbox.com/en-us/contact-us?XR=footnav

• What driver to use for a HP 8563 A Spectrum Analyzer and a Giga - tronics 12000 has

  What driver to use for a spectrum analyzer HP 8563 and a Giga-tronics 12000 microwave synth... these two are not in the driver list can someon help

  Since there is no drivers, you can create your own, request one, use the Instrument i/o Assistant, or hope that someone has one and he posts here. On the creation of a help or to ask one, see the main page of the Instrument Driver Network . As long as you're familiar with the instrument and the manual, creating a driver is not so difficult.

• I want to know what mircosoft to use for education online

  I want to know what mircosoft to use for education online

  If you plan to go to school, I would contact the school to see what their or are the requirements of instructors.

  J W Stuart: http://www.pagestart.com