what early 2011 macbook pro compatible
is the material on my macbook in early 2011 pro spec high enough for exploitation macOS Sierra
Yes.
(144777)
Tags: Mac OS & System Software
Similar Questions
-
13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
-
Afternoon of God,
I ran into a problem with my Early 2011 MacBook Pro. While I was working on my mission, my Mac stops completely. I try to restart it again, the screen is grey with red lines on the screen. As he invites you to the Apple logo it load half-way before it stops.
I rebooted several times and get the same result.
Can you help me with this problem.
See if this program to repair Apple Extenstion applies:
http://www.Apple.com/support/MacBookPro-videoissues/
If you think that it applies, print this page and take it with you in an Apple Store. Some employees are not always aware of this program.
-
In early 2011, MacBook Pro won't start
In early 2011, MacBook Pro won't start
Is-ti connected? Fully charged?
Give us some facts!
-
Looking to update Early 2011 Macbook Pro 13' to the SSD and need advice
Hi - I'm looking to upgrade my Macbook in early 2011 Pro 13' with an SSD. Here are the specs of my current computer. Would be grateful if someone can offer an experience on the SSD can / should go with. Thanks in advance!
Presentation of the material:
Model name: MacBook Pro
Model identifier: MacBookPro8, 1
Processor name: Intel Core i7
Processor speed: 2.7 GHz
Number of processors: 1
Total number of cores: 2
(By heart) L2 Cache: 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Boot ROM version: MBP81.0047.B2C
Version of the SCM (System): 1.68f99
Material UUID: 3565290B-8047-51EB-9D7E-82ED8091ADB6
Motion sensor sudden:
Status: enabled
Chipset Intel 6 series:
Vendor: Intel
Product: The 6 Chipset series
Link speed: 6 Gigabit
Negotiated link speed: 3 Gigabit
Physical interconnection: SATA
Description: AHCI Version 1.30 taken in charge
TOSHIBA MK5065GSXF:
Capacity: 500,11 GB (500,107,862,016 bytes)
Model: TOSHIBA MK5065GSXF
Review: GP005B
Native Command Queuing: Yes
The queue depth: 32
Removable media: no
Removable drive: no
BSD name: disk0
Turnover: 5400
Media type: rotation
Partition map type: GPT (GUID Partition Table)
S.M.A.R.T. status: verified
Volumes:
EFI:
Capacity: 209,7 MB (209,715,200 bytes)
BSD name: disk0s1
Content: EFI
Volume UUID: BDC1974F-6B8C-3DAE-9DB2-3AA3C17BF506
disk0s2:
Capacity: 499,25 GB (499,248,103,424 bytes)
BSD name: disk0s2
Content: Apple_CoreStorage
HD recovery:
Capacity: 650 MB (650,002,432 bytes)
BSD name: disk0s3
Content: Apple_Boot
Volume UUID: 313A61DC-A35D-3021-96F5-1B24A04C0022
See:
https://eShop.MacSales.com/upgrades/MacBook-Pro-13-inch-early-2011-2.7-GHz/inter nal-discs
They also provide videos for how to replace the HD with an SSD.
You can also use more common 2 1/2 inch SSD, although some users have reported some probloms with the EVO Pro 850 Samsun
-
Early 2011 MacBook Pro 13 will be able to run MacOS Sierra
I have early 2011 GPE 13 '' that still works great! However, I am curious to know if she will be able to upgrade to Mac OS Sierra once that came out. If my memory is good, she is 64-bit (notebook is not in front of me right now).
Yes, it will be.
-
Creative cloud on early 2011 MacBook Pro 13' 2.3 GHz Intel Core i5
Hello
I'm trying to get feedback on the question if more creative cloud would go on my laptop current. Cloud creation is required for most of my Masters in journalism classes and school recommend buying a new computer altogether, but I'm exploring options before you go this route (expensive). I heard a lot of different comments; the school said there is no way that my laptop would be favorable as a result, a few friends to HER that I could possibly buy extra memory (I currently have 4 GB). I am looking for honest reviews and impartial on the question of whether it is absolutely necessary for me to buy new hardware altogether as a result of flowing normally (in this case, I would stick with Mac).
Thank you!
System requirements vary depending on the different applications:
For example:
Creative cloud:
https://helpx.Adobe.com/creative-cloud/system-requirements.html
Photoshop:
https://helpx.Adobe.com/Photoshop/system-requirements.html
Illustrator:
System requirements | Illustrator
Acrobat:
System requirements | InDesign
After Effects:
-
2011 Macbook pro running slow and beach balling
My Early 2011 Macbook pro worked extremely slow for a few months. He is lagging in the start-up and opening of all applications. It also happened to coincide with my Wifi, refusing to recognize my Macbook, he repeated that a device was already on the network with the same IP address. I tried reseting the IP address several times. But since he has never done this on other networks I received a new router this week and have not had a problem until now.
The biggest problem is the race slow, hot and delay. I have 8 GB of RAM and a 1 TB hard drive. I'm running OS X 10.11.5. Any suggestion or help is greatly appreciated!
Model name: MacBook Pro
Model identifier: MacBookPro8, 1
Processor name: Intel Core i5
Processor speed: 2.3 GHz
Number of processors: 1
Total number of cores: 2
(By heart) L2 Cache: 256 KB
L3 Cache: 3 MB
Memory: 8 GB
Try and reset your SMC
Reset the management system (SCM) controller on your Mac - Apple Support
Hope this helps, good luck to you.
-
Is there a compatible ssd to upgrade early 2015 Macbook Pro?
Planning on buying a new macbook pro. Information on upgrading the early 2015 macbook pro said that it wasn't something compatible yet. I was wondering if in 2016 if anything compatible exist now?
OWC (macsales) can have.
But even open systems of the retina may void the warranty and can give the Genius Bar the right to deny any future service to avoid being blamed for what you broke. Change the SSD guarantees you invalidation some.
-
Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?
Give it time - it may take a few hours depending on the size of your library is
LN
-
Cintiq 21UX DTZ-2100 Compatible with end 2011 Macbook Pro?
Everyone successfully connected a Cintiq 21UX to an end 2011 macbook pro? I could make using Windows 7 via bootcamp, however I was unsuccessfully trying to get IOS Lion to recognize the monitor. Am I missing something? I'm using the latest drivers and a DVI - I to mini display port connector.
Thank you!
M rich
As much as I hate to say it, for the sake of someone else who has this problem, I'll answer my own question. I talked to a representative WACOM today and they asked if I'd handed the switch at the rear of the CINTIQ to DVI mode or if it was the VGA mode. Of course, it is VGA. After I hit the switch of the CINTIQ worked perfectly.
-
How can I switch from OSX Lion 10.7.5 to El Capitan on my end 2011 MacBook Pro?
How to move from OS X Lion 10.7.5 to El Capitan on my end 2011 MacBook Pro? I get an error 'install the distribution of the error signed by apple. I'm sure I need first to switch to something else, but I have no idea where to start.
1. check all your applications to ensure compatibility with ElCapitan.
When those you want to keep (as possible) have a compatible update: you can update after installation.
2 ElCapitan performs better with more than 4 GB of Ram, although in very low load systems, it runs on 2 GB.
3. your hard drive doesn't have to be "nearly complete."
4. go in the Appstore and download ElCapitan (the download comes in your Applications folder)
The installer is removed after installation, so if you like to keep a copy before starting the installation.
5. install all applications updated.
-
How to replace the hard drive with an SSD on a model of end 2011 MacBook Pro 15 inch, A1286
Hello
I would like to replace the hard drive on my model of end 2011 MacBook Pro 15 inch, A1286 with a disk solid state drive (SSD). First of all, I would like to know if this is possible. Second, what is the best way to do it? I'm under the Yosemite OS if that makes a difference.
Here are some technical details of my current system:
-MacBook Pro 15 inch, late 2011 model A1286
-OS yosemite
-16 GB of memory/RAM
-Currently using stock HD
All instructions step by step would be helpful with what software should I use to make backups of my current operating system (e.g., SuperDuper). I would also like to know what tools or material I need like type of screwdriver, cables to transfer data to the SSD, etc.. My goal is to not have to reinstall each app one by one on the SSD, but if that's the only way to do it then it's okay.
Thanks in advance for any help.
You can see instructions OWC here. Tools are mentioned in the discussion (I used a plastic knife picnic with the stronger edge somewhat blunt for nylon pry tool). I suggest you invest in one of these external fences. Install the SSD in who and clone internally externally with CarbonCopyCloner or SuperDuper. Then move the external drive of the internal drive after the start of the SSD in the external to confirm the operation.
-
If I put mothballed a 2011 MacBook Pro for 1 year or more, I should get the battery removed, even if the computer is off?
Or can we safely be left in the machine for a long period of inactivity without fear of anything untoward happening?
How to store a Macbook Pro properly during an extended period of time?
https://support.Apple.com/en-us/HT201725
Best.
-
End of 2011 MacBook Pro update
Can I use memory Module Apple 8 GB 1600 MHz DDR3 (PC3-12800) - 2 x 4 GB to upgrade my end 2011 MacBook Pro (4 GB / 1333 Mhz)? The representative said it's for 2012, but I read here that some have used it without problems on years later.
Mac can be very picky with ram, unlike Windows machines. For that it works better with no trouble now or later, be sure to buy ram designed for Macs. Match sticks and speeds. Some Mac does not start if a faster ram is used. Go with 2 x 4 GB 1333 mhm, same SODIMM, made for Apple products.
Maybe you are looking for
-
Install windows 7 on ENVY m6-1251eo D0Z42EA #UUW
I want to install windows 7.where can I get the drivers from? Thank you
-
Fabric zoning best practices (new FC)
I'm new to CF (we are an iSCSI store), but I'm learning to my DCD. I read on different blog posts on zoning, which on the whole I think logical. I came across this blog post and am a little confused by the diagram:http://vmfocus.com/2012/05/31/fabric
-
Updated to 2015 CC - pressure of the pen registers do not
HelloI have a Tablet Wacom Intuos P S, and everything worked fine until this morning. After the update to 2015 CC pen pressure isn't recording with brushes. I tried just about everything (drivers, bumps, parameters, etc) and I'm sure it's a softwar
-
I installed the sdk "VMware-vSphere-Perl-SDK-5.1.0-780721.x86_64.gz" perl on centos 6.3 - x86_64, apparently with success (after a few oddities, such as the UUID requiring libuuid-devel). However, resxtop is looking for a bunch of 32-bit executable t
-
I just downloaded Lightroom CC via Creative Cloud. I have already installed Lightroom 5. The CC version crashes when launching on my iMac 27 "end 2013. I never had problems before. I did a reboot. What do I need to uninstall version 5 first?