What external Maxie resolution is my Mbp does support?

Similar Questions

• What RAM max Equium A110-276 PSAB2E does support?

  TOSHIBA EQUIUM A110 PSAB2E-008006AV.

  I just replaced both modules of memory the two 516 MB with a 2 GB module.
  Everything works fine.

  However, I heard comments varied on the maximum memory.
  I was told that the maximum is 2 GB, but I've heard, the laptop should have 3 GB; If this is the case, I can reinsert one of the 516 modules.
  .

  Hello

  The Toshiba page says that this laptop supports Intel 945GM Express chipset
  Intel 945GM Express chipset support maximum memory up to 4 GB to 400, 533 and 667 MHz.

  So, theoretically, you can insert the second module of 512 MB

• E540 + Dock among Pro - max of the external screen resolution is 1280 x 1024

  Hello

  This issue could be discussed and resolved already somewhere else, but I couldn't find a match for my situation:

  I recently bought the ThinkPad E540 with Pro among docking station, in which I have connected my external LG Flatron IPS236 monitor. LG max resolution is Full HD 1920 x 1080, but for some reason any the max of my external screen resolution is only 1280 x 1024. The screen is connected to the station Pro among DVI port. I have two day of the graphic card drivers and the LG monitor drivers and started the system. I also tried using 75 hertz and framerate of 60 Hz, but without any help.

  What should I try next?

  HA, I finally got. Research on the subject long enough, revealed the cold made that updated Lenovo systems do not provide you with the last set of drivers (graphics card). On the contrary, it prevents actually update you the drivers downloaded from the provider (Intel) site. * beep *.

  So was the solution for this:

  -Remove the display card drivers (Device Manager / display adapter / preferences / adapter / uninstall)

  -The latest drivers downloaded from the web site of the hardware vendor intall

  BUT PLEASE NOTE:

  Just after I had uninstalled the original display card drivers both the external display and the display of the desktop became black. I had to reset my computer and start Windows Mode safe, where I was able to install the new drivers.

  Now my question for Lenovo is: * beep *.

  Why is - that you can not simply to allow installation of the latest drivers from map display through your own update system OR simply give users the ability to update the original adater than newer display drivers.

• Tecra R940 - 1 H does support external resolution 2560 x 1440

  Hello

  I use a laptop TECRA R940-1HP
  I want to buy professional instructor Phillip 272P4QPJKEB/00, with a resolution of 2560 x 1440.
  Please write to me.

  My laptop can support such a resolution?

  Support of external resolution depends on the graphics card that is built into the laptop.

  As I know the Tecra R940-1HP supports the chip Intel HD Graphics 4000.

  To my knowledge, this chip Intel HD 4000 supports max resolution of 2560 x 1600/32 bit via Display Port.

  I guess more details on Intel's own graphic chip found on the Intel page.

  Welcome them

• External monitor connected to the Dynadock does not work

  I just bought a docking station universal toshiba dynadock via amazon.com (latest version). I plugged on an Acer Aspire 5738zg computer laptop, Windows 7, 64 bit.
  Everything works great - except for my external monitor (6 months old packard bell viseo 190w, 18.5 inches, max resolution 1366 x 768 at 60 Hz)

  The dynadock manual says connect with monitor dynadock station via a vga cable - what I've done. Job monitor is completely black. The manual says then click the icon in the field of system status / tray (do not know what the word - the small icons at the bottom of the screen on the right screenfor side which) to configure the dynadock to be extended or mirror mode.

  Problem is that the icon does not exist. I have the icon for the audio part of the dynadock and icon for the system whole dynadock (icon called "toshiba dynadock tool" - here I can release the docking for example, but do not do anything on video/screen).

  I checked and the video/screen the dynadock element was installed togheter with everything - the installation was complete and successful. Still no icon if...
  I'm not watching videos or games, just be able to use my external when monitor I surfing online and you use microsoft word etc. - no data transfer gigantic so far as I can tell.

  How to solve this? Via the control panel of my laptop? How...? :-)

  I'd appreciate some advice that I am completely lost as to how to solve this problem (tips preference in the form of a very easy step by step 'manual' as I'm absolutely not an expert in computer science, just a regular user).

  Hi nanna.

  I think that the best way to solve this problem is to download and install the latest graphics driver for the dynadock.
  So please, use this link, download and install the driver.
  http://www.DisplayLink.com/support/downloads.php

  If the external display doesn´t not working after installing the driver, please do a right mouse click on desktop and verify the "screen resolution".
  You should see 2 screens.
  If this is not the case - there is an error during the installation of the utility dynadock.

  In this case, please visit the toshiba page
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp and download the latest dynadock utility.

  Please chosse: Options - connectivity - Docks & replicators - Dynadock

  You will find the version 2.4.0.13

  hope this will help you!

  Best regards

• Satellite M50-156: How can I change my external screen resolution?

  Hello
  I bought an exernal monitor for my laptop M50-156, which has a resolution of 1920 x 1080.
  But the problem is that this resolution is not available in my computer display settings!

  I tried to update the graphics card and chipset, but the max resolution I have is 1280 x 1024!

  So, my external monitor may not display correctly :( Anyone have the same problem?

  Help, please... Thank you.
  BEB

  > But the problem is that this resolution is not available in my computer display settings!

  The resolution is not available, and that says it all! It of not possible to choose that and you will need to use another resolution!

  There are two reasons why your favorite external resolution is not available:
  (1) the chip graphic card does not support this
  (2) or the graphics card driver does not contain this resolution.

  In your user manual, you can find all the external resolution supported and available
  But I guess that the 1920 x 1080 is not taken in charge

• what external storage is good for the iPhone 6 more

  what external storage is good for the iPhone 6 more

  Try doing a Google search. It will give you many hits on it.

• Satellite A300 - XP SP3: how to set external display, resolution 1280 x 960

  Hello world

  I installed the latest display driver for Mobility Radeon HD 3650, but I can't understand how to set the Resolution for my external monitor at 1280 x 960 (85 Hz) - the original driver of non - Mobility Radeon ATI does not have this option.

  In addition, my A300 does not remember the setting of brightness with FN + F6 / F7.
  After windows restarts, it is once again the most.

  Any ideas / suggestions?

  Thanks in advance,

  Manulu

  Hello

  The availability of the external screen resolution depends on the installed graphics driver and the graphics card itself. If the two parties n t support this external display (1280 x 960) resolution, then you will not be able to choose!
  See the user manual for this if the GPU provides support for this resolution of the external display (1280 x 960).

  Regarding the brightness setting:
  If the laptop is connected to the adapter, the brightness of the display will return to the optimum brightness. But you can manage these display settings in power management.
  There, you can create a profile for certain situations, for example when the laptop works with the energy of the battery only
  In this power profile, you can assign different levels of display brightness.

• ThinkPad tablet 10 maximum external monitor resolution

  Hello

  The max resolution that I receive on the external monitor or by using the docking station or micro HDMI port is 1920 x 1080. The touch screen's native resolution is 1920 X 1200.

  1. is it possible to get alo less 1920 X 1200 on the external monitor?

  2. in the case, which could be the technical reason if the video card compatible with still more than 1920 X 1200 theoretically.

  Thank you.

  The answer certainly lies with Intel, not Lenovo. It's an Intel chipset and GPU, and pilots come from Intel...

• U2713HM monitor - cable DVI standard / max resolution

  Hello.  I just received a U2713HM monitor (from the output of Dell) and connected to my video card (ATI Radeon HD 5450 in a desktop Dell Studio XPS 8100) with the supplied DVI cable.  I am allowed to select the maximum resolution (2560 x 1440) but when I do all past "fuzzy" and "pixelated" in white.  If I lower the resolution 1920 x 1080 then everything works fine.

  A little on my own, including a few similar questions posted here, I think that my video card should certainly support 2560 x 1440, via the DVI port but that the cable delivered with my monitor is a single instead of double link link (I checked this in another post on this forum that included a photo of what single bond and double connectors look like) , and that the double bond is necessary to get the max resolution works correctly?

  I you'd be grateful if someone could please confirm my assumption of what's going on and also cables dual link DVI should come standard (through the output also) with U2713HM in view of its resolution monitor?  Or is there any other question that I'm not aware of that could cause this problem instead?

  Thank you very much.

  Technical contact Dell Support. Tell them that making Dell sent you incorrect wiring for your monitor U2713HM. Provide your monitor e-mail, service tag address number, delivery address, telephone number. Ask them to set one up in order to send you the following missing cables:
  Cable HCX4X or DL DVI - D MPGMR
  DN137 VGA cable
  Cable USB3.0 PN81N

• Bought the new computer windows 10, itunes has changed location of support for external hard drive. The music does not appear in itunes.

  BOUGHT NEW COMPUTER WINDOWS 10, CHANGED ITUNES MEDIA LOCATION FOR EXTERNAL HARD DRIVE. THE MUSIC DOES NOT APPEAR ON ITUNES.

  Changing the iTunes media folder location setting affects only where new additions to your library will be stored.  To use a disk external drive to store your library complete (and assuming that you have access to the original data of the library on an old computer) you must copy the iTunes folder, by default in C:\Users\username\Music, on the external drive - structure library and its records should be like this:

  

  The hold button SHIFT DOWN when you start iTunes and when you see this message:

  

  Click choose a library... then find and select the iTunes Library.itl in iTunes on your external drive folder.

  For more information, see user turingtest2 on make a library of portable split.  You must also acquire a 2nd external drive and allows create and maintain a backup your library.

• My MacBook Pro runs very slowly.  I El Captain 10.11.4 rare apps on it, most are closed while I'm on safari.  My photos take a 125 gb storage capacity.  If that is the question, what external hard drive is recommended?  If not, what is?

  My MacBook Pro runs very slowly.  I El Captain 10.11.4 rare apps on it, most are closed while I'm on safari.  My photos take a 125 gb storage capacity.  If that is the question, what external hard drive is recommended?  If not, what is?

  Download and and publish a report of Etrecheck:

  http://etrecheck.com/

  Ciao.

• Screen LCD Satellite pro M10 max resolution.

  Hi, sorry for my bad English, my question is:
  Satellite pro M10 laptop internal LCD max resolution is 1024 x 768? excluded you superior resolution with scrolling?

  I read in the specific techniques of my laptop max internal resolution is 1280 x 1024 is not really?

  Thank you

  Hello

  As far as I know that the display resolution depends on a view controller
  I found this information in the user manual. The following models are available:

  -14.1 XGA with 1024 x 768
  -15.0 XGA with 1024 x 768
  -15.0 SXGA + 1400 x 1050
  -15,0 UXGA with 1600 x 1200

  I think that in this case, your device has a 14.1 or a 15.0 XGA display controller. Well well, in my opinion it s all right with your laptop. Enjoy it :)

  Good bye

• Tecra A3: cannot use the 1920 x 1200 on external monitor resolution

  Hello

  I have use for a Toshiba Tecra A3 Notebook with build in Intel GMA900 video card. Connected to the Dell 2407WFP (with the current drivers installed video card and monitor) I could only choose 1600 * 1200 settings. The screen on the screen with the right max resolution of 1920 * 1200 - intel but I could only choose 4:3 rations in display properties.

  The laptop should be able to run the resolution of 1920 * 1200 with no problems, but I can't choose this settings.

  An idea or a tool that could help me...

  Thank you

  P.S.: with the same connection Tecra A7 works very well @1920 * 1200

  I don t know why, but some drivers graphics don t allow to use all the screen resolutions.
  Unfortunately, it doesn't have much to do. If the resolution 1900 x 1200 is not in the list of available resolutions, so you will not be able to use it.

  Maybe another graphic driver would allow you to use this special resolution but I m not 100% sure about this.
  In addition, you should always use drivers Toshiba graphics and if you want to install other graphics drivers IE. Omega drivers so you can do so at you own risk!

• Camileo Pro Max resolution D1 or VGA?

  Hello

  I'm confused with the specs of the resolution of the Camileo Pro.

  All the specifications of product, description and announcements like max resolution VGA (640 x 480).

  However, the manual claims resolution (720 x 480) D1 max.

  Which is correct?

  No experience? Have you tried?

  As far as I know you can save movies with a resolution MPEG-4 640 x 480 and 30 images per second.

  Thank you to consult the manual still maybe the mentioned resolution is unrelated to recording videos