What happened to my ability to create a new folder and how do I solve this problem?

Similar Questions

• Windows XP: I have 448 MB of RAM available. What happened to the 64 MB of RAM lack and how can I solve this problem. Thank you

  I am trying to install application constant guard Internet Security of Comcast.  After trying to download and install the product, I get and RAM error message indicating I need 512 MB of RAM to install this product, and I only have 448 MB of RAM available.  What happened to the 64 MB of RAM lack and how can I solve this problem.  Thank you

  The only way to see more of RAM is to install a graphics card and disable the onboard graphics of your motherboard. If you do this, you should be able to see all the 512 MB of it.

  That being said, I will repeat what I said before...
  You can always buy more RAM and install it on your motherboard. Go to crucial.com for more information.

  In addition, you should review install 'Internet Security' application or suite. They are not necessary (you can easily configure Windows so that it is very safe) and they often ruin the performance of a PC.

  If you want advice in "hardening" your PC security, let know us.

• I can't rename my files photo and document from one month. What happened and how can I solve this problem?

  I can't rename my files photo and document from one month. What happened and how can I solve this problem?

  Hi robertjefferies,

  You get the error message?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Diagnose and repair Windows files and folders problems automatically

  Method 2: Start the computer in safe mode, and then check. To do this, follow the steps below:

  Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the boot advanced options, select Mode safe

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Let me know if the problem persists in this mode

• I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?

  I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?

  SMART is a technology on newer computers that allows the computer to monitor the health of hard drives in your computer. Something happened to one of your readers that detects the smart as a problem, and she's trying to warn you proactively to this topic before it fails.

  It may be also that you have installed a very old hard drive that does not support the CHIP and the monitor reports that it can not read the drive status.

  So depending on your level of knowledge and experience, you can watch to replace the hard disk that is reported, or you can disable SMART followed to make the message disappears. The second option but then means if it is really a failure, it is likely any work stoppage or corrupted so data you do note to solve.

  http://en.wikipedia.org/wiki/S.M.A.R.T.

• CREATING DVDS IN WINDOWS VISTA HAS BURNED & FROZEN ON 91.2%... WHY DOES DO THIS AND HOW CAN I SOLVE THIS PROBLEM?

  I tried to make a dvd of family movie transferred to the computer of a vhs tape.  He stopped burning at 91.2% with no error message, just the green line, trying to fill 100%.  What happened and how can I solve this problem?  I'm so frustrated.

  You should try to use windows live movie maker.

  Click the Start button, click all programs, scroll to the bottom of the list of programs and click Windows live, and then click windows live movie maker that lists.

  http://www.windowslivehelp.com/solution.aspx?SolutionID=d53771d0-6183-4b06-96ea-fe3c356e24e0

• I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I want to erase the hard drive and use it to install windows xp.

  From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.

  Does not help, but could help to point you in the right direction...

• Windows FixIt error code 0 x 80092003. -What this means and how can I solve this problem?

  I have a PC with Windows XP SP3... ecentlped recognizing my DVD/CDRW. I tried to download Windows Fixit and when I tried to run, I get the error code 0 x 80092003. -What this means and how can I solve this problem?

  HP Pavilion a1410n PC with Windows XP Media Center edition. Sony Optiarc cddvdRW.

  Hi J Mbanza,

  -What is the link that you used to download the fix tool from?

  error 0 x 80092003 which is an error reading or writing to a file.

  Try to download from the link below and check.

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Thank you!

• 8007371 C error code. This is what and how can I solve this problem?

  For these last two days I tried to update my Windows Vista, but the updates that I tired failed and show this error code on this subject. What this mean and how can I solve this problem? Thank you.

  Hello

  1. do you have security software installed on the computer?

  2 did you last modified the software on the computer?

  3. do you have active user account control?

  Method 1:

  I suggest to turn off user account control and also disable any anti-virus application and then try to install the updates.

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Warning: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the steps do not help, go to the method 2:

  Method 2:

  I suggest you run the FIXIT from the link below and.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 3:

  You can also try the steps mentioned in the link and check if the two steps above do not work.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Hope this helps and keep us informed if you need help.

• What is the meaning of the error code 0 x 8007024 and how do I solve this problem?

  Can not turn on my Windows Firewall and everytime I try to do, it says error code 0 x 8007024. So, what is the meaning of the error code 0 x 8007024 and how do I solve this problem? Thanks for your concerns...

  See the following: http://support.microsoft.com/kb/968002

• I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  Hello

  Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.

  Hope that helps!

  Kind regards

  Sheena

• What's going on here and how can I solve this problem?

  I created a logo with a custom 'C' character and the whole logo became a single compound path.

  It looks like this:
  

  Problem is when I apply a graphic style to the track, the C becomes very awkward on me.

  It looks like this:

  

  It doesn't seem to matter what graphic style I apply.  I tried several and get the same result every time.  I've isolated the C and makes sure there are no stray points.  I ran on it simplification.  Always get this awkward result.

  Can someone explain to me what is happening here and how I can fix this problem?

  Here's what the path looks like:

  

  THIS IS HOW I FIXED IT:

  Because the document in list 2 Information Panel in the C CMYK objects, I thought I would try to Merge under Pathfinder make one.
  Instead, for some reason, what happened was as published Illustrator the compound path in individual trajectories.  From there, I made an another merger and...
  As if by magic, the problem disappeared.  I am now able to apply graphic styles to the compound path and everything works as it should.

  Still don't know what created the original problem, however.

  Thank you guys for the suggestions.

• I have the names of duplicate files, what's happened and how can I solve this problem?

  I'm so screwed!  sigh... I was back up files and moving them from one disk to another... done with thousands of files... it was completely straight and perfect.  now, it seems that windows kept multiple files of the same name, same type.  Why?  How?  the only thing different is the size and date related to them.  dates are often inaccurate, so I don't know which to keep and which to get rid of.  I do not know the extent of the problem, but I know that she completely screwed up all my web files.  I've created several sites and it is now a huge problem.  -What happened?  How should I do?  It's weird.  I am running windows vista.  "never had this happen before."  Thanks for any help you can provide.  I need.

  Hi VICK-TORIA.

  I suggest to follow the steps in the article and check if it helps to solve the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/eliminate-duplicate-files

• I started my computer and there are all these weird symbols as of circles, triangles, squares/boxes in all the different combinations. What went wrong and how can I solve this problem?

  The last thing I remember install was itunes 10.5, so I don't think that is the problem, but this has never happened before.

  ... and there are all these weird symbols as of circles, triangles, squares/boxes in combinations all different...

  If that's what you look for the desktop icons,

  

  ... then the police Marlett has been replaced by the system font. This has been addressed and (I think) solved in the following thread.

  Update loses wing dings font only appear the program has then no value

  No particular answer has been specifically marked as the answer to the problem, but I believe that we have identified and solved the problem.

• I constantly get this pop-up, ' Exc in ev handl: TypeError: oSAPlg.oRoot.log is not a function. " What is the problem and how can I solve this problem?

  I received a lot of emails from trash and other deleted all my cookies and history. Now, I'm getting this pop-up and it is interfering with my use of the internet, ' Exc in ev handl: TypeError: oSAPlg.oRoot.log is not a function. " What is it and how can it be fixed, removed, managed to get rid of, etc. Thank you

  I've been working on what's wrong. She can do with McAfee Siteadvisor. I disabled suitable siteadvisor who never stopped popping up messages.

• HP Photosmart Premium C309a: it fell out of the printer, what is it and how can I solve this problem

  Hi all!  A piece of paper got stuck yesterday my boss pulled out and the following came out with it.  I have no idea what is the name of this game and how / where to put it back.  The error message that is displayed on the screen is Oxc19a0040.

  

  Any help is appreciated.

  Thank you

  The part is called the Strip encoding, and it is essential for the operation of the printer.  The band passes over the stem of transport (the long stem stainless steel cart rolls on) and must be threaded through a sensor at the rear of the cart.  He is then attached at each end to support in the printer.  The message here was made for a different but similar printer model , but the same principles apply.

  Note the coding Strip has thousands of fine lines, printed on the Strip, they are used to keep track of the position of transport when he moves here and there.  It is important not to scratch the band or to get ink spots on the strip.  In addition, do not clean the Strip.

  If you have any questions or problems with the post process, please come back here.