How to create a Partition diagnosis HP Elite SFF-8300

Similar Questions

• How to create a partition bootable on USB

  Can someone tell me how to create a partition on my USB key bootable?

  The Microsoft page for this was complicated and not very clear :-)

  I hope that flashing the new update of the BIOS on my USB solves the recent problems of Vista...

  Hello

  How to create a Vista Installation USB key - read the warnings
  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  HOWTO: Install Windows Vista from a high speed USB 2.0 Flash Drive
  http://kurtsh.spaces.live.com/blog/CNS! DA410C7F7E038D! 1665.entry

  Install Windows Vista from USB Bootable Flash drive
  http://www.techmixer.com/install-Windows-Vista-from-bootable-USB-Flash-memory-drive/

  How to create bootable USB drive to install Windows Vista?
  http://www.askvg.com/how-to-create-bootable-USB-drive-to-install-Windows-Vista/

  You can install Windows from one will also let you Flash a BIOS.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to create a partition only for my operating system another to play with me?

  My relay problem that I had towing partition C: and D: drive, but I had to remove my D: drive because my C: drive was full, and now I want to create and partition only for my O.S. and only this, so that any other program can be installed in my D: drive.

  Someone could answer my question A.S.A.P. Please, I want to know if I can do it or not, and if I can how to do it.

  Before trying to partition, which is shown in management disks for disk 0? (the name of the partitions & sizes)

  This PC came with win7 preinstalled, and if yes do you have does the recovery discs?

  Note If you attempt to partition, without first giving that info, you can trash your system and lose everything on the disc

• How to create a partitioned table

  Apex 4.2

  Oracle 11g

  There is a large table, which have 160000 rows, I would like to create a partitioned table to improve performance, but could not find a way to create a.

  Concerning

  Hello

  I don't see how your question relates to APEX, unless you mean how to make APEX builder object Explorer.

  Answer is simple, you can do it from the object browser.

  You should write a ddl script to create the partitioned table, and run it from sql commands.

  Kind regards

  Jari

• How to create the partition on a column in a table on a daily basis

  Hi all
  I wrote a query that does not, I have a column of varchar type, and I want to create the partition of the table on that column based daily interval. but ist is in error...
  
  my query is...
  
  create the table user_detail
  (username varchar2 (50))
  The user ID number,
  country varchar2 (25).
  accupation varchar2 (100),
  company varchar2 (100),
  joindate varchar2 (14))
  partition by range (joindate)
  INTERVAL (NUMTOYMINTERVAL (1, 'DAY'))
  (PARTITION newone VALUES LESS THAN (to_date (April 13, 19 ', 'aa-mm-dd')));
  
  
  error is:
  
  Error from the 1 in the command line:
  create the table user_detail
  (username varchar2 (50))
  The user ID number,
  country varchar2 (25).
  accupation varchar2 (100),
  company varchar2 (100),
  joindate varchar2 (14))
  partition by range (joindate)
  INTERVAL (NUMTOYMINTERVAL (1, 'DAY'))
  (PARTITION newone VALUES LESS THAN (to_date (April 13, 19 ', 'aa-mm-dd')))
  Error in the command line: 1 column: 0
  Error report:
  SQL error: ORA-14751: type of invalid data for the partitioning column of a partitioned table interval
  
  
  Can I create partition on the varchar data type?

  On ORA11gR1 it works:

  --virtual column
  CREATE TABLE TEST(joindate VARCHAR2(14), part_joindate AS (to_date(joindate,'dd.mm.yyyy'))) partition by range (part_joindate)
  INTERVAL(NUMTOYMINTERVAL(1, 'YEAR'))
  (PARTITION newone VALUES LESS THAN (to_date('2013-04-19', 'yyyy-mm-dd')))
  ;
  
  INSERT INTO TEST(joindate) VALUES('19.04.2013');
  SELECT * FROM TEST;
  
  DROP TABLE TEST;
  --aux column
  CREATE TABLE TEST(joindate VARCHAR2(14), part_joindate AS (to_date(joindate,'dd.mm.yyyy'))) partition by range (part_joindate)
  INTERVAL(NUMTOYMINTERVAL(1, 'YEAR'))
  (PARTITION newone VALUES LESS THAN (to_date('2013-04-19', 'yyyy-mm-dd')))
  ;
  
  INSERT INTO TEST(joindate) VALUES('19.04.2013');
  SELECT * FROM TEST;
  
  DROP TABLE TEST;
  

  Published by: spajdy on April 19, 2013 14:58

• How to create a partition on a Satellite A200 - 14 d?

  Hello

  I have a problem with my scores as I'd first on the laptop 2 apparent partitions on the HARD disk, labeled C:\Vista
  (Vista Home Premium) and E:\Data (57GB and respective 55GO). I decided to format vista because I had some problems with the FN key. After using the product recovery CD to install fresh windows that I enjoyed, I have only one partition at a total of about 115 GB. I wanted to have at least two partitions, so I used once again the CD to reinstall windows and try to find out how I can make a partition during the installation. After I chose the language there was a window saying that I can adjust my disk space, so I did, distribution of 40 GB on the partition where windows should be installed, assuming that the rest of the HARD drive label is distributed to a second partition.

  After that I reinstalled and did all the updates, I had a big surprise to see that I have 1 single partition with 39 GB. Now, I used Device Manager to see what the problem is. I went to the properties/volume of HARD drive section and clicked on fill. Here, it shows the 40 GB windows partition and unallocated space of aprox 72GO. My main problem is I have to have this space partitionated and since the recovery disk does not give me this option is there any other way vista can make a partition with the remaining space? I look forward for some advice please.

  Thank you

  Hello

  Don t worry dude it is all right. It seems that the partition was created but not activated.
  After the Windows Vista installation please go to managing disks.
  You will find the first partition C and maybe a second or only one free space.

  If you want you can shrink the C partition first. After this process, you can right-click on the free space and create a second partition or add free space to the second partion that is already created.

  Good luck and best regards

• HP G70-460US. new hard drive. How to create a partition recorvery and fill?

  I have a laptop HPG70 with Windows Vista 64 Bit OS, which has had problems with disks-errors.  I used Clickfree backup completely my computer every week, so I decided to buy a NEW hard drive and recreate the image on my computer on the new drive.   I was surprised to find that the instuction to boot from USB attached CLICKFREE device would NOT work on HP laptops!   I had to reinstall the old drive, join the CLICKFREE webside and create a Bootable CD with the software easyfix to completely recreate the image on my computer.   After the re-installation of the new drive and about 2 hours, the drive of my computer has been completely restored... Hooray!

  I was reading the docs from HP on the creation of a DVD cover, just in case catastrophic anothor disk HARD crash, so I decided to create a set of recovery discs as directed by the video...  I had never created these because when I bought my computer, I don't have any DVD to create.

  I watched 'MY COMPUTER' and I saw that there is a recovery partition (D: on 12 concerts) and open and it just says HP, so I decided to go ahead.

  When I started the recovery disc creation program, it gave me the error message that it wasn't any how restore partition and wouldn't create any DVD.  I don't have a DVD in the drive, when I started to deal with because I thought he'd JUMP full disc when it started, but never that which until now...

  How can I start creating the recovery discs when the recovery disc creation program says there is nothing there?

  This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Given that I do not work for HP and I do not use "Clickfree", I won't be able to figure this out for yourself, or a company. What I can tell you is that when installing a new operating system, an upgrade, or an imaging / backups, pointers on the recovery Partition are lost. By following the steps that I have to offer, most people are able to recover his computer to a factory condition.

  The way I would try it, is to make sure that you have a fully functional backup of your operating system partition and all data. Then I would try a recovery using the "HP Recovery Manager'... then 'F11'... and finally, marking the"HP Recovery patition"as active. One of these methods must recover the computer. Once restored, you should be able to create a set of HP recovery disks.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• What is the purpose of the 100 MB Partition in Windows 7? How to create several Partitions in Windows 7?

  When I tried to install Windows 7, a named system reserved partition will be created, what is its use?
  If I re install Windows 7 without changing the partitions, the partition of 100 MB will be visible, how to hide?
  If I upgrade to Windows 7 Windows XP, this partition will not be created, is that it causes a low yield?
  During the installation of Windows 7 on a new computer, off-system reserved, only 3 new partitions will be created, how to avoid this, because I use Linux and Windows, so I need 7 partitions to create.

  Could someone please help

  This is for the Windows recovery environment (WinRE), also supplied with Windows Vista, only it has been available from the Windows Vista installation disc only, although some manufacturers make available on a partition separated on their factory facilities. In Windows 7, this feature is installed on all computers and is stored in the 200 MB partition if you are installing using a single partition scheme. However, if you are installing to a drive that has more than one partition, the recovery environment is stored in a folder at the root of your installation disc, so if you install to a partition with a label of C:\ she will be C:\Recovery.

  If I re install Windows 7 without changing the partitions, the partition of 100 MB will be visible, how to hide?

  Yes, it can be removed and by default it is hidden.

  If I upgrade to Windows 7 Windows XP, this partition will not be created, is that it causes a low yield?

  If you are upgrading from a previous version of Windows 7, the recovery environment is stored in a folder in the root of your installation disc, so if you install to a partition with a label of C:\ she will be C:\Recovery.

  During the installation of Windows 7 on a new computer, off-system reserved, only 3 new partitions will be created, how to avoid this, because I use Linux and Windows, so I need 7 partitions to create.

• Re: How to create a partition for instant recovery on Satellite A100 PSAA9E

  .. .This can be a difficult issue but I wil give it a shot...

  I have a Toshiba Satellite A100 PSAA9E and a defined recovery disk.
  In the recovery for the operating system (win xp MCE) disk there are two iso: PEbase.iso and the HDbase.iso.
  After some snooping in the Northeast, I discovered what an enivorment of preinstallation and installation (sysprep) prepared.

  Now I wonder if it can be so simple place the image .tpa from the recovery disk in partition and install it whit a pe that works directly from this partition.

  The only real obstacle is that there is some .inf and .sif PES statically to the installation partition, which can be useful to know what has changed from the original version of xp MCE.

  I know that the question is not easy but I hope that in the expertise of the admins

  Hello

  > Now I m wondering if it can be so simple place the image .tpa of recovery in a disk partition and install it whit a pe that works directly from this partition.

  I doubt that it will work to be honest, I've never tested so I can't say exactly if it will work or not but in my opinion it is not possible

  New laptop model are equipped in HARD drive recovery option, but this recovery works completely different. There is an additional menu that allows to start the HDD recovery procedure.

  Your laptop supports the recovery disk and that disk must be used to retrieve the laptop.

  By the way; I have a Norton Ghost utility. I create my own image using this tool and placed it on the second partition. If something goes wrong with my OS I can restore the entire system using the shadow and the filename of the image to the other partition.

  Good bye

• HP envy-1271er: how to create a partition bootable since the recovery in the event of an operating system partition no longer starts

  If I understand well on my HARD drive has a recovery Partition (~ 20 GB) and a bootable recovery Partition (~ 2 GB). During clean installation process of Windows 10 I format the Partition Recovery Bootable but remain intact.

  Is it possible to create the Bootable Partition if Windows 10 is not loaded?

  You can start a Windows 8 or a rescue 10 thumbdrive or multimedia installation.

  You can use it to access a command line where you can use the Diskpart utility to make the partition active.

  Take a read of the next lesson.

  http://www.online-tech-tips.com/computer-tips/set-active-partition-Vista-XP/

• How to create the partition from the list where value does not

  Hello
  
  How Fund partition where I want to store all data, which is not equal to, values priview,(A,B,C,D,E)?
  

   PARTITION PN001 VALUES (*is all values !=A,B,C,D,E*) TABLESPACE test_1

  Thank you!
  
  
  ID

  The research of partition (default) values?

• How to create multiple partitions to the boot camp windows 10?

  Hello

  I have a Macbook pro 2015 with 1 TB of HDD and installed 10 windows on it using boot camp with a size of 500 GB for windows.

  Now can I do 500 GB in three to leave different using "Disk management" on windows?

  If I do that it will cause problems?

  harshav339 wrote:

  Hello

  I have a Macbook pro 2015 with 1 TB of HDD and installed 10 windows on it using boot camp with a size of 500 GB for windows.

  Now can I do 500 GB in three to leave different using "Disk management" on windows?

  If I do that it will cause problems?

  -on-Windows-disk-for-Bootcamp-OS-x http://superuser.com/questions/944815/is-is-possible-to-have-multiple-partitions

• 8300 elite SFF: 8300 Elite won't USB flash drive boot

  Elite Mini PC 8300.  I made a bootable USB key but cannot get the Menu of boot or boot order configuration in the BIOS to see the player.  Exactly the same as in this other thread pending: USB not available in the Start Menu

  In 'Device Configuration' (BIOS) is listed, it does NOT appear in the Boot configuration order, even if I save changes and reboot.  I have disabled UEFI and Secure Boot, activated Legacy BIOS, I intend to install Windows 7 x 64.  When starting I press F9 or ESC to display the start menu and the USB key is not listed.  All USB ports are enabled.  Tried the ports front and rear (except USB 3.0 those W7 with no support from the other drivers for USB 3.0).  I tried he prepares with Microsoft USB DVD Tool and Rufus.

  The flash player has worked well with several other PCs.  for example I have HP Pro 4300 SFF and the flash player starts without a problem here it is configurable in BIOS and select from the Start Menu.

  First attempts on Elite 8300 was with BIOS v2.99.  But I also tried after update BIOS to v3.03 because release notes made remarks on improving support USB, but there was No change even problem.

  Take the battery CMOS press switch reset CMOS on the systemboard put the CMOS battery, restart the device to fix a date and time in the BIOS and check if this is useful.

• Creating a partitioned table to an existing table interval.

  Hello

  Is there a way I can create a partitioned table interval of an existing table using DEC? I know how to create a partitioned table in range.

  create the table range_partitioned_table

  partition by range (date_column)

  (

  partition p1 lower ((to_date (' 08/01/2012 ',' mm/dd/yyyy'))),

  lower partition p2 values (to_date (' 09/01/2012 ',' mm/dd/yyyy')),

  PN VALUES LESS THAN (MAXVALUE) PARTITION

  )

  AS SELECT * from existing_table;

  Is there a similar way to the Interval partition an existing table?

  create the table interval_partitioned_table

  partition by range (date_column)

  interval (provide the interval)

  (

  partition p1 lower ((to_date (' 08/01/2012 ',' mm/dd/yyyy'))),

  partition p2 values less (to_date (' 09/01/2012 ',' mm/dd/yyyy')),

  -PN SCORE VALUES LESS THAN (MAXVALUE)

  )

  AS SELECT * from existing_table;

  For example:

  SQL > create table interval_partitioned_table
  2 partition by range (hiredate)
  interval of 3 (numtoyminterval(1,'YEAR'))
  (4)
  5 score below p1 ((to_date (' 08/01/2012 ',' mm/dd/yyyy'))),
  6 partition p2 values less (to_date (' 09/01/2012 ',' mm/dd/yyyy')),
  7 - PARTITION pN VALUES LESS THAN (MAXVALUE)
  8)
  9 AS SELECT * FROM emp;

  Table created.

  SQL >

  SY.

• Create a partition pour Iso installation

  Hello to all,

  I have a small question to know how to create a partition and how to put the files on it pour put my ISO of the OS that I vousdrais Installer suite the nominal. This EST possible?

  I'm on ESXi 4.1

  KNPC

  You can drop your ISO on current data warehouses or create an another data store (so generally by adding an extra disk). The ideal is a countenance a NAS that is NFS/CIFS so you can copy the ISO en CIFS from a post on Windows and mount the same disk on a permanent basis in NFS on your ESXi

  Eric