What happened to the 'Variations' Image option > settings?

Similar Questions

• What happened to the initial view options in the Document properties?

  What are the initial view options in the Document properties? I just updated my player and it is no longer accessible. SOS.

  Hi kga406,

  Please tell me if you are able to access 'initial view' tab in the properties of the document using Acrobat.

  You can change the initial view settings in Acrobat and you can view a PDF in Reader with the same initial point of view as established.

  Kind regards

  Ana Maria

• What happened to the file saving options in Lion?

  I recently updated my Mac OS X Lion and Photoshop CS5 seems to operate normally, albeit a little slowly, since the upgrade. However, when I create a new Photoshop file, create layers, then "Save as", all my normal format options are missing. The only choices that I gave are large Document Format, Photoshop RAW, and TIFF.

  If I open a JPG or PSD file, there is no problem. The command "save under" gives me a normal file, registering the window with the normal format options. But a new file turns into something completely foreign. What happens here?

  It seems that if the new file is greater than 2 GB (psd limit). Nothing more important should be tiff (up to 4 GB) or psb.

• What happened to the Variations of the adjustments and how I get it back? I have Photoshop CC 2015.

  Photoshop CC 2015 version 16.0.

  Windows 10.

  Hi VoidGhost,

  Variations has been removed from the version of Photoshop Creative Cloud.

  Levels, curves, Hue/Saturation. They all allow you to do the same thing, but the user interface is very different. And even aren't the only options, there are a lot of ways to spend the balance of the colors in a picture.

  Kind regards

  Tanuj

• What happened to the Save & exit option that was in the previous version? It does not appear in Firefox 4. I used this function all the time.

  The previous version of Firefox has an option "Save and exit" from the pop-up when you exit Firefox. Version 4 does not appear to have that option. PIN tab app is supposed to replace it? I would have two options.

  Firefox stores now always the old session, and you can access it by going to the history menu and selecting "restore previous Session."

  If you want Firefox to display the message to save the session, it can be turned on again by changing some preferences.

  1. Type of topic: config in the address bar and press on enter
  2. Accept the warning message that appears, you will be taken to a list of preferences
  3. Find browser.tabs.warnOnClosepreference, if its value is set to false, double-click on it to change its value to true
  4. Repeat this for 3 preferences browser.warnOnQuit, the browser.warnOnRestart and the browser.showQuitWarning

  If you always open the last set of tabs, another approach is the following:

  1. Click on the orange button Firefox, then select options to open the options window
  2. Go to the general Panel
  3. Change the setting "When Firefox starts" to "show my windows and tabs from last time '.

• CP5.5 what happened to the advanced answer options in models of tests?

  Just downloaded the models tests and they were looking for and noticed that it is not an option advanced in the MCQ in the model even if their nature is on the quiz slide.  Why is this?  We have learned to love this ability.

  Advanced response is not available on Multiple slides, if you have that is configured to accept multiple responses. Your slide there the radio buttons or checkboxes?

• What happened to the full download option

  It was possible to download the full package, but the download is now only 274KB. Why?
  I used to download the full package for installation on more than one office.

  ^ Do not know why you must post the Beta and the test of the Aurora also founded links when the OP just need the installation link to full ofRelease.

  aliashhto find https://www.mozilla.org/en-US/firefox/all.html in the future just look 'Systems & languages' link under the download button green on www.mozilla.org

• What happened to the option space V and H?

  What happened to the ability to add H and V space for images in DW cs6? Did remove it?

  Finally I saw it, it was on 5.5 DW

  Yes, it has been removed with the alignment option.

  The Adobe policy is Dreamweaver should aim essentially to professional web. You can expect to see features more outdated deleted.

• What happened to the option 'start private browsing '. Version 20.0

  What happened to the option "start private browsing"? Version 20.0

  Private Browsing - use Firefox without saving history

  Private browsing has been improved in Firefox 20.

• What happened to the image field when you create a field of type of image for the Web application?

  What happened to the image field when you create a field of type of image for the Web application?

  The answer is that the point of the IMAGE has been changed to the MEDIA.

  Sorry, Ian, what research for this discussion, I got no results. All good and thanks for the carillon. Hope everything goes well.

  Mouma

• What happened to the insertion function. It was on the same line as file

  What happened to the insertion function? It was on the same line as the files, tools, etc. He's gone. If you want to insert a jpg you sent as an attachment. I have read through the help files and that you can't find the answer. I want my old Thunderbird back! Newer is not always better.

  I suspect that you have lost the Mail composition toolbar. Open an entry window, press and hold the < alt > key, type v and check the box for the mail toolbar. I would also allow the Menu bar while you are there.

  Another possibility, if the Insert option is missing in the mail toolbar, is that it is spent in composition in plain text mode. Open the settings page of the account assigned by right-clicking on the account in the left pane, select Composition & addressing and tick the box labelled "Dial using the HTML format".

• What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  cwalker,

  If it does not, it may be time for the list:

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

• What happens if the PC I just downloaded Itunes on &amp; connected to, does it display not all devices?

  What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  Hello 2sealadies!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with your iTuens on Windows 10 not to recognize your iPhone. I know how important it is that the iPhone is recognized by iTunes. Read this article with steps If iTunes does not your iPad, iPhone or iPod. Specifically, after the first series of measures:

  If you are using a Windows PC

  1. Open Device Manager by following the steps for the version of Windows that you have:
     • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
  2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

  The pilot and
  No symbols

  A down arrow
  by the driver

  Exclamation or
  question mark by
  the pilot

  No Apple Mobile
  USB device driver

  You don't see symbols next to the Apple Mobile Device USB Driver

  If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

  

  You see an arrow down

  If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

  

  You see an exclamation point or question mark

  If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

  

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  

  Manually update the Apple Mobile Device USB driver

  If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

  1. Choose update driver software.
  2. Choose "Browse my computer for driver software."
  3. Choose "Let Me pick from a list of drivers for devices on my computer.
  
  
• Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
• Click Next. You should see the disk button.
• Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
• Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
• In the disc window, click Open, and then click Next and then click Finish.
• Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
• Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

See you soon!

• What happened at the sight of split with iOS 10 on iPad? Before the download, I could open next to safari pages or other apps.

  What happened at the sight of split with iOS 10 on iPad? Before the download, I could open next to safari pages or other apps.

  Still, it works as before, or if.  Check your multitasking general, settings and make sure that it not turns off somehow.

• What happened to the "bookmark this page" in my bookmarks drop down box? I need! I am not computer savy and want to just scroll through all the pa marked with a bookmark

  The toolbar previous at the top of the screen re: bookmarks had the easier and is more agreed for me (and I'm sure MANY OTHERS) to just click, scroll, stop and click and fact! I'm on page that I bookmarked. So now, no? and what happened to the "mark this page" option initially drop down list? It's so easy. I have to develop records, files, plugins, etc...
  What in is he developed a method for people who are geeks high tech click on something that will lead THEM to last orders?

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  /* move "Show All Bookmarks" to the top of the Bookmarks drop-down list */
  #BMB_bookmarksPopup #BMB_bookmarksShowAll {-moz-box-ordinal-group:0}
  
  /* move "Show All History" to the top of the History drop-down list */
  #PanelUI-history > * {-moz-box-ordinal-group:3!important}
  #PanelUI-history > label.panel-subview-header {-moz-box-ordinal-group:1!important}
  #PanelUI-history > #PanelUI-historyMore {-moz-box-ordinal-group:2!important}
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration
  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor such as Notepad to create a userChrome.css (new) file in this folder (the names are case-sensitive)
  • Paste the code in the userChrome.css file in the Editor window and make sure that the userChrome.css file starts with the default @namespace line
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css. Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)