What happens if I leave the battery while facebook is installed via USB on a 9300 with os6 smartphones blackBerry?

Similar Questions

• What happens if I remove the battery with the power adapter on Satellite Pro L

  What happens if I remove the battery when I use my laptop directly on the AC adapter / CC?

  Thank you

  Hello

  If the laptop is ON it s not advised to remove the battery.
  You can remove the battery while the laptop is OFF.
  Remove the battery, connect the AC adapter and turn on the laptop

  Good bye

• What happens to my all the updates, if I Re install Win 7 new

  After 3 years, I found that the supporter of Windows 7 (70 GB) is full in my hard drive, can be due to many UPDATES all these years. Because I don't know how to free up space on this drive, I decided to re - install Windows 7 again. In this case, what happens to all my received UPDATES earlier. Do I have to download all the UPDATES again? Help, please

  Yes, you will need to submit a new application of updates after reinstall. However some later updates are in fact replaced by later that the results can be more effective. I also download and manually apply service packs on new construction as allows me to apply the setting "nobackup.

  On the last one I made after that the SPs, I had a little less than 100 updates to apply to the wide then came running clean disk with the option to clean the system files to delete history of update files.

• What happens if I leave the clouds

  If I left cloud after a year do all programs on my computer just stop working?

  OK, Subscriber revenues don't work as long as you have a subscription.

  This FAQ has answers to many common questions and can be useful for you.

  http://www.Adobe.com/products/creativecloud/FAQ.html

  -Dave

• NB100: Remove the battery while plugged in that?

  I own a Toshiba NB100 and said that when I use the power cord, I have to remove the battery, after leaving the battery that connected while on hold Cela would damage the battery. Is this correct? Must I remove the battery when the netbook is plugged?

  Hey Buddy

  I started an article on the battery and some advice for her:
  [How to get the most out of the battery | http://aps2.toshiba-tro.de/kb0/HTD9401AZ0001R01.htm]

  Good reading! :)

• Satellite L350-170: can I leave the battery in if AC is connected

  Hello

  I recently bought this laptop to replace my table.
  What I need to know; No matter if I keep it supported all the time?
  Do not leave the battery discharged?

  I'm not the wireless, don't plan to go out etc...

  Sorry if this is a stupid question!

  Yes you can do it.
  My Satellite works sometimes on battery but especially the AC adapter is plugged in and that the battery is always placed in my notebook.

• Leave the battery in or out

  I guess this applies to all laptops, but since I have my T400 connected almost exclusively to food, should I leave the battery in or out?

  In other words, is the aging of the battery faster because it is in a constant state of charge (in) or it would last longer if I removed it while the computer connected to the power supply?

  Thank you.

  leave the battery in won't hurt, if you are not using your battery which keep well the battery around 40 to 60%. Then go into your power manager thinkvantage in respect of the maintenance of the battery. Set the level to minimum load to near 20% and maximum level between 40 and 60%.

  Now unplug your power supply, then run the battery around 60%, then reconnect your power back. This should maximize your battery life.

  Also, if you use the 65 watts, the laptop adapter speed Accelerator (CPU speed will be capped) If you do not have the battery plugged.

• How low should I leave the battery on my MacBook Pro before I recharge

  I have a new MacBook Pro and I know that once a month I'm supposed to leave the battery discharged.  But how low should it let?

  Don't let the battery discharge to 0. You must load whenever it is convenient. There is no battery memory as the old batteries so you can load any level of discharge.

• Satellite A30 switch of the battery, while the AC is plugged

  I've had my A30 for 3 years now, but recently it has begun to move to the power of the battery while it is still plugged into current alternative. Does anyone else have this problem?

  Hello

  In my opinion, there are two possibilities:
  First the adapter has a fault or cable is broken and there is sometimes power fluctuations.
  The second possibility could be bad connection between AC and power plug on the laptop or between the power supply and the motherboard.

  However, I don't think you have enough experience to solve alone. I recommend you contact the ASP in your country for the control of the laptop.

• Charaging the battery while working

  Hello

  I have a T520 with a battery 9 cells and I want to know everything worth knowing about how can I keep the battery in the healthiest condition possible:

  I learned from his guides (T520 pdf, which are many... I don't really have the time to read all the) it is better to use the battery until it completely discharge then charge to 100% again and so on. also, I realized that if I am connected to the AC a lot (which means that I am in my room or anywhere not to use the portability of a laptop computer) it is best to disconnect the battery between 30-60% and put it in a normal environment (dry and not very high temp).

  you have more tips I should know?

  and more specifically: is it okay to charge the battery while I work on the laptop?

  so far I tried of angrrr while the laptop is off, but I see that it isn't working-it's difficult to synchronize between my tasks and load

  Thanks in advance

  lead_org wrote:
  (1) it is probably best that you keep the battery in the laptop for two reasons,

  (a) he acts as UPS

  (b) the laptop would not strangle his CPU if you are on the adapter 65 w.

  (2) there was no reason why charge the battery while working will cause problems if you use the adapter supplied with your thinkpad.

  If you want to optimize your battery, then take a look at this guide.

  http://leadorg.WordPress.com/technology/ThinkVantage-Power-Manager/how-to-TPM-to-prolong-your-batter...

  If he ordered the laptop with the battery 9 cells, he should have with the 90 Watt adapter.

• What happens if I delete the Hello from my computer? I have Windows XP Home Edition

  I have Windows XP Home Edition. What happens if I delete the Hello from my computer? Thank you

  Nothing, really. It allows to find other devices generally (computers and printers) on your network.

• After you reset the Windows Activation within 30 days what happened then? Reset the Windows Activation again?

  Original title:
  After reset Windows Activation within 30 days, what happened then? Reset the Windows Activation again? PLSS, answer to my question, I don't know what happened after windows activation for 30 days... Thank you
  -----

  After reset Windows Activation within 30 days, what happened then? Reset the Windows Activation again? PLSS, answer to my question, I don't know what happened after windows activation for 30 days... Thank you

  Activate Windows.

  Once actually activate you Windows with a product key legitimate - you should be * fact *.

• What happens if I disable the processor in Device Manager

  I see 2 processors in Device Manager. What happens if I disable the processor in Device Manager

  Hello

  Since you say that it works perfectly in safe mode, I think that there is a problem with a driver or an application causing this boot loop.
  Please see this thread with details exactly what a clean boot is and how to use it to solve the problems of this kind. The idea behind a clean boot is to identify the exact cause of the problem so that we can fix or remove the troubled application.
  http://support.Microsoft.com/kb/331796

• What happens IF we replace the default certificates for vCenter 5.1?

  Does anyone have specific vmware documents indicating what happens IF we replace the default certificates for vCenter 5.1 SSO, inventory, Web Client etc... services?

  I found this below at page 19 of https://www.vmware.com/files/pdf/products/vCenter/VMware-vCenter-Server-Single-Sign-On.pdf

  Certificates update

  When you install the vCenter Single Sign-On, each component that registers with it - including

  vCenter Single Sign-On himself - uses SSL to communicate between components and saved solutions.

  By default, SSL certificates are generated automatically by VMware installation and upgrade process

  and are sufficient for the operational security for most VMware customers.

  Some clients prefer to use their own self-signed or purchased SSL certificates. A tool has been developed to

  help the insertion of these certificates after vCenter Server installation. Because of the additional knowledge

  required to create and install self-signed certificates, we recommend that you review the following knowledge of VMware

  basis of articles:

  "Deployment and using the tool to automate SSL certificate.

  (VMware 2041600 knowledge base article)

  "Generation of certificates for use with the VMware Certificate SSL automation tool"

  (VMware 2044696 knowledge base article)

  In 10 years your vCenter starts (because of expiry of the certificate).

  Your users will see pesky warnings of SSL certificate when connecting components.

  Apart from that all traffic is always secure and encrypted with certificates by default, you have simply a chain of trust for them.

• Curiosities: what happens if I restart the NFS server?

  Hi guys,.

  I use Linux as a NFS data store. I'm just curious, regularly there as updates of the kernel, etc. that requires a reboot. What happens if I restart the NFS server without:

  1. turn off the virtual machine on it

  2. without disconnecting the ESXi host data store

  What is the proper way to restart the NFS server?

  Thanks ^^

  If you mean 'a good' (without no timeout error appears in the log), then delete NFS datastore is the whole procedure before you restart the NFS server. Unlike datastore VMFS, by removing the NFS datastore, that this will not completely remove the storage at all, instead you only remove it from the ESX host and you can reconnect the NFS mounting even whenever you want.

  http://www.no-x.org