Get the mouse cursor

Similar Questions

• The mouse cursor changes to hand instead of the text tool when I hover over the text.

  Normally whenever I have fly over the text in an e-mail or on the web, in order to highlight to copy and paste, the mouse cursor becomes a text tool.  However, now every time I have fly over the text, it remains on the hand tool.  Whenever I click on the mouse button, there just cause the hand to shake.  I can then move the page and everything I want to get off.  The only problem is, I want to highlight the text with the text tool, not handle the page with the hand.  My question is how to change the mouse cursor to get the text tool when it flies over text?

  Normally whenever I have fly over the text in an e-mail or on the web, in order to highlight to copy and paste, the mouse cursor becomes a text tool.  However, now every time I have fly over the text, it remains on the hand tool.  Whenever I click on the mouse button, there just cause the hand to shake.  I can then move the page and everything I want to get off.  The only problem is, I want to highlight the text with the text tool, not handle the page with the hand.  My question is how to change the mouse cursor to get the text tool when it flies over text?

  I wonder if this will help...
  Right-click on an open office space > Personalize > mouse pointers > pointers tab, click on use default > apply/OK

  t-4-2

• My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

  I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

  original title: black screen

  Hello

  Remember to make changes to the computer before the show?

  Try the following methods and check the status of the issue.

  Method 1:

  Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

  Method 2:

  If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Make repairs to the system from the Windows recovery environment.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Method 3:

  If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.

• do not move the mouse cursor

  Hi all. today I did something really stupid. I was in a chatroom without supervision earlier and another person and I'm in it and I could tell definently I makes him angry. I left the chat room and 15 minutes later im on another site and the cursor of the mouse is suddenly freezes and does not scroll on the page. everything else seems to work very well. so I restarted the computer, the mouse works when the windows password page appears, so I type the password and then loading this page and the home page comes (one with all programs, etc.) and appears as soon as that is when the mouse cursor freezes and not scroll or move. everything else continues to load and seems to work very well. If I restart the computer and put it in safe mode and the mouse works moves very well and everything. Anyway, the bottom line is I think the other person sent me a virus or something that is used to pass my cursor in normal mode. What should I do? also, I can't get the sound to work on my computer in safe mode. says low right volume icon ' audio service does not "and I want it running in safe mode, until I can get this cursor problem is resolved. any help is greatly appreciated and please explain in terms laymans, because I don't know anything about computers. Thank you very much for your time and have a great day.

  Hi crazyforfrance,
   
  As the mouse works properly in safe mode I suggest you try troubleshooting this issue with a clean boot to see if we can identify a program or driver causing the problem you are experiencing.
   
  A clean boot to start Windows with some programs and drivers off or on selection. By doing this through trials and errors we can hopefully identify a specific cause of this problem. Here's how to solve problems with a clean boot:
   
  Clean clean boot.
   
  a. Click Start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  b. on the general tab, click Selective startup.
  c. under Selective startup, click to clear the load startup items.
  d. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  e. click OK.
  f. When you are prompted, click on restart.
  g. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  Reset the computer to start as usual.
  
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.
   
  Note: In safe mode you may not be able to hear the sound because the sound drivers and other drivers may not load and only essential drivers can handle, which are very important to run an operating system. and it's a way of diagonistic.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Disc Read Error black screen with the mouse cursor

  Hello world.

  I'll apologize in advance if this was picked up elsewhere, however, I've been unsuccessful with validated solutions, I found.

  I am trying to reinstall windows 7 on my laptop. I used to have win8 but got fed up with the thing of 100% of the disk. I reformatted my drive and installed win7. Everything was ok for a few days, and then he started getting lag. I decided to do a chkdsk (c:/f/r/x). He asked for a reboot in order to complete the process. After the reboot, chkdsk found a couple of bad sectors (I don't remember what files should be moved) and restarted again. This has happened 3 times in total.

  The last restart led me to the «a read disk error occurred press Ctrl + Alt + Delete to restart» It comes as I can get without the disc...

  Then I tried an official win7 installation disc which gets a little further. After lingering on the 'Starting Windows' screen for a few minutes, the screen turns black with only the white slider.

  I changed my BIOS settings also so:

  * SysInfo *.

  -No change

  * Advanced *.

  -CPU - disabled power saving mode

  -EDB (Execute Disable Bit) - active

  People with disabilities - Mode BIOS fast-

  -AHCI Mode Control - Manual

  -Set the AHCI mode - people with disabilities

  -USB S3 Wake-Up - disabled

  * Security *.

  -No change

  * Start *.

  -Boot Device Priority

  1 SATA CD (DVD player)

  2 SATA HARD DRIVE

  -Touch Mouse Pad - people with disabilities

  -Secure Boot - people with disabilities

  -Selection of the Mode of OS - OS CSM

  -Internal LAN - enabled

  -PXE OPROM - disabled

  [Please note that I used setting 'UEFI and CSM the OS' aswell in the Mode of the OS but kept a CSM OS as long as there is no point using both with win7]

  I have used most of the F8 options and get the w/cursor black screen.

  Start in safe mode always seems to stall on "... \drivers\disk.sys" what "loading Windows Files". After 5-10 minutes on this, it would eventually return to the screen Black w/cursor...

  Jacky help would be really appreciated, soon.

  There is no point in trying to reinstall Windows. If your drive is faulty, then a new installation will not fix it. To get a reliable report on the status, you must download and run the web page of the Disk Manager Diagnostics tool.

• The mouse cursor freezes, Silverlight Plugin, Windows 7 Pro 64 bit.

  When activated, the plugin Silverlight 4 freezes my cursor of the mouse on the web pages with Silverlight. Disabling Silverlight plugin restores the function of the mouse cursor, but disables display Silverlight content. Occurs with the latest versions of Firefox and IE. The PS2 and USB Wacom input Tablet mouse freeze. Keyboard PS2 remains active, except the "Mouse keys" used in the cursor. Must press 'Back' key to get the silverlight content web page up the function of mouse cursor. Update drivers Wacom and drivers MS Intellimouse Optical. Uninstalled and reinstalled the Silverlight 4. Problem remains.

  Platform: MS Win 7 Pro 64-bit. All updates current. Material: Card mother Asus P6T, Core i7 930 CPU, 10 GB of RAM. Security through Zonealarm Extreme Security Suite with active Forcefield. No problem on my PC with Win XP Pro 32-bit.

  I can't determine if it's a bug with Silverlight/Win 7 64 bit or a problem with my computer/hardware. I don't have problems with my mouse cursor otherwise. The research of this question gave no solution. Suggestions to solve this problem would be appreciated.

  Hi DelgadoFlash,

  1. did you of recent changes on the computer?

  2. the problem persists both 32 and 64 bit browser explore?

  This can happen if you haveWacom Graphire Tablet input connected to the computer.

  You must disable Tablet PC Input Service in the Service Manager and check if the problem persists.

  (a) click Start menu and type services.msc in the search box and press enter

  (b) later in the list of services, locate Tablet PC input service.

  (c) make a right click on it and click Properties, set the Startup Type to disabled and press the Stop button.

  (d) close the services window

  After disabling the service above you won't be able to use the device.

  As a work plug the appliance only when you need to use.

  Rename an executable file calledWISPTIS.exe in the C:\Windows\syswow64 directory to something likeWISPTIS_old.exe.

  WoW64 is synonymous with "Windows on Windows 64-bit", and it contains all the files of 32-bitbinary required for compatibility.

  If the above step works, then you will need to contact Wacom to check if they have released an update on this issue.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Special the mouse cursor on the area

  I am trying to create a training for a pretty advanced piece of software. This software uses several different cursors to indicate the different actions in certain areas: for example a helping hand, a triangle and two arrows.
  
  My question: is it possible in Captivate 1 to simulate it? So can I specify a specific cursor for a given region (mouse over)?
  
  And if not, what would be the best way to get around this?
  
  Thank you!

  Hi Dutk,

  FYI (for your information) 'HTH' is not my name - Larry Walther is my name, and "CatBandit" is my screen name. 'HTH' is simply a shortcut for "hope this helps. Not much, but didn't want you to treat me like HTH for the next five years.
  

  Sorry, but the mouse cursor can not be changed Mid-slide. In other words, there may be two mouse cursors (the same image or other) in a chronological slide. If you want to view cursors of evolution, you will need to either go to full-motion-check or split the action in several slides, and then change the slider to change the blade.

  Sorry I can't help more with this.
  .

• Turn the mouse cursor

  This only happens when I visit Facebook, but the mouse cursor turns and will not stop. Firefox will never block or unresponsive, but it behaves as if there is always from my PC 'think '. Any ideas on how to stop my cursor to turn constantly?

  
  

• The mouse cursor disappears on the address and search bars.

  In Firefox 10, the mouse cursor disappears from the address bar or the search bar after a certain time, or I guess that after visiting a site that I paste below. I don't see what part of the word I click on the address bar or the search bar for the correction because there is no mouse cursor. After clicking on tools and options cancel, the mouse cursor appears (I make no changes to the options) or when I click on customize in the navigation bar, then the icons I click on Cancel again without modification, and the mouse cursor appears again (as you can understand some trigger for windows option implementation even without change is done). I uninstalled firefox 10 just for this reason. Back to Firefox 9. Safe mode - same problem happens. So no problem addon. And the same thing happened in another operating system, so this isn't a fault of a facility.

  Problem solved for me in the last version of firefox v.10.0.1

• Bookmark shortcut does not work if the mouse cursor is focused in the version of the flash plugin.

  I tried to open the bookmark panel shortcut [ctrl + shift + B] buttons when the mouse cursor is focused with the flash plugin. But it does not open. But I clicked on the page and he's trying again, he opens the bookmark panel.
  Try the following link
  [Example: https://learnable.com/courses/a-crash-course-in-mobile-web-design-195]

  This may or may not be a problem.
  It's just a suggestion...

  This is a limitation of the works in Firefox.
  
  If a plugin is developed, which makes this shortcut key is no longer so he treats all keys work.
  
  You have to click outside the plugin, if you need to use a keyboard shortcut.

• The mouse cursor disappears when iTunes movie go full screen

  This isn't a question... actually I found a hack solution to this bug and I wanted to share it with other people having the same problem.

  Since the upgrade of the OS X El Capitan, I'm having a problem with my cursor disappears randomly. It is very repetitive if I start a video in iTunes with the enlarged screen and the cursor disappears. Indeed, after entering mode full-screen, iTunes mask the cursor of the mouse that is predictable. The problem is that iTunes may not reappear there again once, for example, when I go to another office for a temporary job.

  Move the mouse does nothing, escaping mode full screen does not come back. It is very annoying. Like I had never had such a frustrating experience prior to a new installation of El Capitan 10.11.3 and update iTunes to 12.3.3, I thought that this is due to the update to iTunes. So, I made another new facility of El Capitan, this time without updating iTunes. But the problem still exists. It is interesting that I had this problem on my MacBook Pro 17 "end 2011 and not with my iMac 21.5" mid-2009!

  After a little research, I found that this bug is not because of El Capitan, and happened randomly in the other years dating back to Tiger and maybe before.

  Only new change I had made in my MBP Preferences system , was in the part of accessibility, and it was related to Zoom. I had always used this feature, but I put the Zoom Style 'full-screen'. This time (after the new installation of El Capitan), I had changed to 'Picture-in-Picture'.

  I changed the Style of zoom "full screen" even once, and the problem resolved.

  If this does not work for you, can be debilitating, other options, such as 'Use keyboard shortcuts to zoom' or 'Use of scrolling with keys of change to zoom movements,' can solve the problem.

  We all know that it is a bug, and he has been there for a long time. I found that many people had reported it to Apple, but the problem persists.

  For those of you who want to use the zoom "Picture-in-Picture" style, or set the zoom style full screen does not solve the problem of their mouse disappears, I will mention a few ways to recover the mouse cursor. The following solutions are applied to a mouse cursor disappeared after entering the movie to iTunes (or any other application) full screen.

  1. Move the mouse until the switching Office brings back the cursor. Now, you can switch the desktop computer and do whatever you want. (It's easier work, at least for me).
  2. Use Alt - Tab to switch to another program; This will bring the mouse cursor.
  3. Press Ctrl + F2 to activate the Apple menu. (You can also move your cursor away to top left and click to activate the menu.)
  4. Press Ctrl + up arrow (or swipe up with 4 fingers on the touchpad) to activate the control of the Mission.

  You can also find other ways to retrieve the cursor of your mouse.

  Hope this can help you with the mouse pointer disappears.

  In MBP El Capitan the pointer of the mouse is where you assign to ' picture in picture ' or 'full screen '.

  If you miss your mouse pointer, accessibility-> display "Shake mouse to locate" check to find your mouse pointer. It should be there.

  Note: you have posted in the discussion of the Mavericks, should have used the ElCapitan discussion...

• Qosmio G20 - the mouse cursor freezes

  Play command and conquer tiberium wars a coupke of minutes in the game, the mouse cursor will feeze not allowing me to select units, etc.. I have to use Ctrl, alt, del to exit the game. This does not in all the other games that I used on the laptop. Is there something I can do?

  Details of my laptop are: the present report time: 24/03/2008, 09:49:38
  Machine name: YOUR-3CB2BF2DC5
  Operating system: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227 - 2254)
  Language: English (regional setting: English)
  System manufacturer: TOSHIBA
  System model: Qosmio G20
  BIOS: v1.30
  : Processor Intel (r) Pentium (r) M 2.26 GHz
  Memory: 1024 MB RAM
  Page file: 508 MB used, 1952 MB of available space
  Windows Dir: C:\WINDOWS
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  DX setup parameters: not found
  DxDiag Version: 5.03.2600.2180 32 bit Unicode

  Hello

  If I understand your game freeze but who knows why this happen. As you can see it happen with this game only.
  Have you tried to delete this game and make new facility?

• I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.3.

  I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.3. Thank you!

  tupensi wrote:

  use Microsoft Excel for Mac 2011 Version 14.5.3. Thank you!

  Then you should post on the Microsoft Mac forums where to hang out the gurus of the Office, as is the Microsoft product, with that you are having problems:

  http://answers.Microsoft.com/en-us/Mac

• How to control the mouse cursor using EEG signals

  Hello world

  I am doing a project of cursor control using EEG signals. The idea is to find a way to all signals in a specific period of time in order to find the signal Ridge. Then, the highlight will be a parameter to control the position of a cursor.

  Can someone tell me the function that allows you to control the mouse cursor?

  I also found an old topic asking about it (http://forums.ni.com/t5/LabVIEW/Moving-Mouse-using-Labview/td-p/1285842) and I run an example of this link ( smercurio_fc) program. My cursor is stuck in the upper left corner of the screen, I can't control it again. Can you tell me how to run this program and to use the windows API?

  Thank you in advance.

  Sorry, but I can't do it for you.

  As I advised, you should take the free online tutorials. You clearly lacks the basic concepts of LabVIEW, as data flow.

  Things more: in your real applicaton does not use DAQ Assistant, screw Express are generally not optimal for data acquisition. It is safer and better use good DAQmx live. What is the equipment you use? Sampling rate, etc.?

  Why do you need to read data files? For testing? I thought that you will acquire data active, right? In your VI generate you some signals and write in a data file. Is this also for testing?

  There are several constructs in your VI which simply don't make sense.

  So again, I really suggest to go through online Core1-2 teaching material, which is accessible if you are a student, or if you have shared services provider license... It will really help.

• Laptop screen stays black with the mouse cursor only after that comes the HP and Windows logo

  Hi all

  No, my laptop model is HP Pavilion dv6 1337tx. My OS is Windows 7 Home Premium 32 bit. So, today, I shut my laptop down by force by pressing the power button because it did not at this time. Then the next time I turned it the wrong problem started. Whenever I'm on the HP logo sometimes and then the Windows logo comes also. But then the screen stays black and the mouse cursor appears. So, what can be the cause of this problem? I also tried to open with 'safe mode' and 'safe mode with command prompt', but they did not help either.

  Note - I tried the method of discharge after taking off the battery and holding down the power button. He could not help. All LEDS are working properly. I have no extra monitor, so I can't check the display elsewhere. Also, I ran the memory test which shows that everything is fine. Please suggest what I can do now as I can not enter the laptop now. What can be the reason?

  Black screen with blinking cursor: