WHAT HAPPENS TO THE VISTA UPDATES IF I DO A SYSTEM RECOVERY. I AM STILL ABLE TO UPDATE SERVICE PACK 1 AND 2. WHEN I DO ONCE I HAVE NO SERVICE PACK 1. Help

Similar Questions

• I get the same update to install, again and again, when the original is installed at 4 or 5 times.

  I get the same update to install, again and again, when the original is installed at 4 or 5 times.

  Hi stevie33

  For the update are facing the issue?

  If you have the update already installed on your computer and always offered several times the update then I suggest refer you to the Microsoft article provided below and follow the steps in resolution-

  http://support.Microsoft.com/kb/910339/

  I hope this helps.

• Satellite A30-931 - what happens if the BIOS update will not?

  I was recommended to make an update of the BIOS on the above machine. I think that the existing version is 1.30 and the correct replacement is 1.70 (I think it's PSA33E: [http://support.toshiba-tro.de/tools/eula/info_eng2.asp]).

  The original BIOS has a password. Want to know what happens if this process goes wrong. My system will be unusable or is it a pre-installation of the backup procedure?

  The additional problem is that the fan is happening every minute or so. The radiator looks clean, but maybe new thermal grease should be applied to the cpu.

  Thank you

  Hello

  In the worst case if the update goes bad your computer doesn t boot. This means that you can only see a black screen and nothing you can do. In this case you would need professional assistance from an authorized service, they can reflash the ROM module or Exchange it.

  But a few important points here before starting the update:
  S ' ensure that you are logged on as administrator
  -Disable your AntiVirus and your firewall
  -Disconnect the Internet
  -Close all running programs

  > The additional problem is that the fan is happening every minute or so. The radiator looks clean, but maybe new thermal grease should be applied to the cpu.
  Yes, maybe the thermal compound must be renewed if you already cleaned your laptop. After that, everything should work normally.

• Re: Satelite A500 - what happens if the BIOS update will not?

  Jin

  I have a new Satellite A500 and want to update Bios. What happens if this process does not go?

  Thnks

  Hello

  I do not recommend to do a bios upgrade if your system works well. If the upgrade process go wrong your mobile doesn t boot more, and then you will need to contact
  TASP (Toshiba authorized service provider).
  Be sure to close all programs, disable antivirus, firewall.

  Welcome them

  Post edited by: jeka-Israel

• Equium do not sleep when closing 'lid' - happens after the Vista update

  Since a recent update to Vista my laptop won't sleep with the (power) button either in the start menu.
  The power led lights in red and it says "lock computer" when I try to wake up.

  Can anyone help?

  Have you tried to roll back OS (until the updates have been installed), using the System Restore tool?

• There is an option to 'save all tabs before closing' - what happened with the last update?

  In formats previous Mozilla, if I had more than 1 tablet open as: Facebook, Aol.comand much much more. When I was ready to close the window and hit the 'x' at the top right, I'd get the options "save tabs & close" "close tabs" "Cancel".

  This gave the option of not having to look for things once again, if you are looking for the same tabs all the time. It's the same exact box you get now, but with the option 'save the tabs and close.

  This option can be added back?

  Thank you for taking the time to listen to...

  Clicking history > restore previous Session, restores your tabs and windows of the previous browsing session in Firefox 4

• What happened to the HP - 11 c? I do not understand, they apparently still on HP-12.

  Why would they do this decision? It sounds funny.  I love my HP - 11 c.  What can I do if he dies?  EBay search used calculator?

  Richard

  Hello

  Well, first you have have one of the toughest calculators ever made, here are some stories:

  indestructible 11(c)

  Once again through the rinse Cycle, please!

  The HP11C pumping station & sewage

  Truck ran over my HP - 11 c

  Also, there is a story about a 12 c survived the trip across the intestine of a hippopotamus (see the last point in "Features" in this description of the 12th century).

  The 11 c (in collaboration with the 15 c) production was stopped in 1989. However, the 12 c was so popular with the people in finance that he continued production for 30 years, which in fact model of calculator that remained longest in continuous production.

  Unfortunately the 11 c is only available as used.

  However, form of pressure groups as "Bringing the 15 c", HP has recently decided to release a special edition of the c. 15: the limited edition of HP - 15 c. He is currently on sale in the United States at least US $120 (not bad considering your cost of 11 c about 30 years before). In Europe, it's about 110 euros.

  Simply do a search on "HP - 15 c Limited Edition".

  Hope you continue to enjoy the HP :-)

  BartdB

• 2000 Basic and advanced license we run ISE 1.2, if we update 1.3, what happens to the license we must buy more / license apex

  2000 Basic and advanced license we run ISE 1.2, if we update 1.3, what happens to the license we must buy more / license apex

  When you migrate to 1.3, your license will be updated, advance licence, become apex

• What happened to the oil filter paint in photoshop cc? updated and go

  What happened to the oil filter paint in photoshop cc? updated and go

  It has been deleted in 2014 CC and later. If you keep the CC, you can always use it.

• My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

  original title: I have the same problem posted by Don Gagen on 16 April. My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

  I installed some updates Vista Home Basic important for my laptop on Wednesday, and since then, my computer won't start. I get to the first page of Windows that shows "Configuration updates 0% complete" for about 15 seconds and then restart the machine. This loop continues indefinitely. I spoke to the manufacturer (Dell) who say there have been some recent problems with the update service, and I have to pay (£69) to address this problem. I don't really want to pay for a repair, when the problem does not seem to have been caused by me or my computer. I tried all the options from the start menu, but there seems to be no way to solve this problem, for example, in 'Safe' Mode, the problem persists, and 'Last successful login' does not work either. It will not launch command prompt. I ran Dell diagnostic check before extended initialization and there seems to be nothing wrong with the hardware. I have no disks system of re - install Vista (and that I would lose all my data anyway). I can also access the ID of the license of Vista. The computer is no longer under warranty, and I have no agreement to support hardware or software for it.

  I would be grateful for any suggestion.

  Alan

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  Hello 2sealadies!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with your iTuens on Windows 10 not to recognize your iPhone. I know how important it is that the iPhone is recognized by iTunes. Read this article with steps If iTunes does not your iPad, iPhone or iPod. Specifically, after the first series of measures:

  If you are using a Windows PC

  1. Open Device Manager by following the steps for the version of Windows that you have:
     • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
  2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

  The pilot and
  No symbols

  A down arrow
  by the driver

  Exclamation or
  question mark by
  the pilot

  No Apple Mobile
  USB device driver

  You don't see symbols next to the Apple Mobile Device USB Driver

  If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

  

  You see an arrow down

  If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

  

  You see an exclamation point or question mark

  If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

  

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  

  Manually update the Apple Mobile Device USB driver

  If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

  1. Choose update driver software.
  2. Choose "Browse my computer for driver software."
  3. Choose "Let Me pick from a list of drivers for devices on my computer.
  
  
• Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
• Click Next. You should see the disk button.
• Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
• Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
• In the disc window, click Open, and then click Next and then click Finish.
• Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
• Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

See you soon!

• What happens if the master boot record to your computer is damaged?

  What happens if the master boot record to your computer is damaged?

  A. boot sequence would be lost

  B. the operating system would fail to start

  C. a series of long and short beeps will be heard when starting the

  D. the post OFFICE would not launch

  Hello

  True, and in many cases, it can be repaired:

  Try these from a Vista startup disk command prompt - type at the command prompt and press
  ENTER after each.

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  starting in Windows Vista problems
  http://support.Microsoft.com/kb/927392

  See this article here - to repair/rebuild using the Bootrec.exe tool Boot configuration data
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  Sometimes using EasyBCD works when other methods are not.

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Repair the Windows Vista boot loader
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  If that works then run StartUp Repair twice the Vista boot disk, run once then
  Restart and then run again.

  I hope this helps.

• What happened to the Windows Media Player toolbar?

  I recently downloaded the Windows 7 RC and all my programs and all that work very well, with a few exceptions, but that is because I get all my programs on another partition and another thing is that I didn't see the option to use the windows media player toolbar. In windows XP and Vista, you can set it so that when minimize you WMP, all control buttons appear in the taskbar. Now on Windows 7, it doesn't happen and I don't see an option to do so. I know that you can set it so that there the samll box and it will always stay on top, but which takes place on my monitor. I liked it much better on the task bar. Nobody knows what happened to the toolbar, or is my version of Win7 Glitching?

  -Windows 7 RC Build 7100.

  The tools for Media Player toolbar has been removed because in Windows 7, you can control the media player using Aero Peak of the taskbar. When your mouse on the icon in the taskbar with multimedia and the WMP player narrowed down to the taskbar, the peak flyout box will appear and you can control the media here. Jonathan Matthis aka "7test" on MSN QnA
  Chief Administrator of the Site
  Windows 7 QnA
  http://Windows 7qna.ning.com

• What happened to the great selection of gadgets that allows to be available?

  What happened to the great selection of gadgets that allows to be available?

  Hello

  1. what exactly is the problem you are facing with gadgets in Windows 7?

  2. you are not able to use the gadgets?

  If you are referring to the Windows Sidebar in Windows Vista, then it is not included in Windows 7. For more information click on the link below.

  What happened to Windows Sidebar?

  http://Windows.Microsoft.com/en-us/Windows7/what-happened-to-Windows-Sidebar

  You can publish your comments for us on the link below.

  http://mymfe.Microsoft.com/Windows%20%207/feedback.aspx?formid=195

• What happened to the Suites?

  So, I'm going to guess that it is old news to almost everyone here.  What happened to the suites?  I have been using CS5.5 for a few years and decided to take a look at my options of upgrade only to find nothing but the cloud of shit.  Honestly, this "all run from the cloud" is just stupid in my opinion.  I know everyone seems to think that a cloud is somehow new and has never been done before.  I hate to burst the bubble of anyone but IBM did for 70 or more years, they just called them mainframes.  Companies still use them and a lot of things cloud that you use, there is a good chance that they are running on an IBM mainframe.  In any case, are there no private no-cloud only, desktop purchase option in my computer, the version of the Suite more?

  Polorboy wrote:

  In any case, are there no private no-cloud only, desktop purchase option in my computer, the version of the Suite more?

  The software CC installs on your computer. They maybe shouldn't have called 'Creative cloud' because a lot of people think what you think. The part 'cloud' of things refers to the free 'cloud' storage you get, the fact that the software is delivered via the internet instead of a disc, and it checks your subscription via the internet, but everything else is the same as it was. The software is installed on your local system, the software runs on your local system, and you save your files in your local system.

  The only downside is that you must pay a subscription fee to keep going instead of a big chunk of money and it's yours forever (although, maybe it's a head for some people - stay current is actually less expensive with the subscription model with the model of permanent license of CS).

  Another advantage is that your subscription means that you can install all the software versions of CS6 thanks to the more recent, so that you can stay on the cutting edge all the time if you want to, but you can always have a stable version for you until you are ready to take your project to the new version. I have CC 2014 and 2015 CC CC 2015.3 versions of After Effects all installed on my computer in my freelance studio.

  In addition, you have all kinds of new tools and services we had not before CC came along. I especially like the new libraries feature and how it integrates with mobile apps. You could take a picture in London, pull color out of it, a theme it plop in your library (all from your mobile phone), and it appears almost instantly in the workstations in your office in Nashville, TN for anyone on your team to use in your project. It's really convenient.

  You also get tons of new fonts Typekit, a nice graphic library, and a few other interesting things.

  Now, if you really don't like the idea of the subscription (which I totally understand), you could buy CS6 Adobe again. It is rather updated at this point already and a few questions (depending on what software you use) with operating systems, modern, but you can do it if you want.