What I lose when the flattening of a single layer?

Similar Questions

• What to do when the required help screens will not accept any existing ID or passwords? 13 download to PC elements missing section archive. Normal help screen will not accept any adobe exisitg D. Whatdo, I do now?

  What to do when the required help screens will not accept exixting ID or password?

  Downloaded items 13 PC. Implementation noted this archive missing article.

  If something is demanding a password is not likely to be a request for Adobe since Adobe does not normally require any.  It could be your computer's security requiring you to allow an installation to occur.

• Hello. What to do when the Tablet and mobile shows the desktop version?

  Hello. What to do when the Tablet and mobile shows the desktop version?

  Hi Mona,.

  I tested your site on my mobile and it grew up successfully the mobile version. I suspect that the number on your mobile phone is the cache. Please delete the browser cache and cookies and then test.

  Kind regards

  Aish

• What to do when the subscription is unable to process after you enter the serial number and ID adobe

  What to do when the subscription is unable to process after you enter the serial number and ID adobe

  Contact support by phone / chat / web form.

  Mylenium

• What event fires when the user "leaves" TextInput?

  I need to do some calculations on the data that the user types into multiple text entries.  I want to do the calculations whenever the user leaves one of the TextInputs.  The user may leave the TextInput by tabbing out of the box or click out of the box.  What event triggers when users leave the TextInput boxes?

  Thank you!

  Focusout/focusouthandler()

  After having shipped a display object loses focus. This happens when a user highlights a different object with a score or the navigation device to the keyboard.

• What he average when the green light comes on briefly when it is plugged and them goes out?

  I just bought the webcam connected and the Green led lights up and then goes away.

  Hi, Lord of the Manor,

  EDIT: Seen the following in response, I guess I should have asked, works the webcam otherwise OK?  Is that the only issue that light?  If so, then I would argue that it doesn't really mean anything and it would not be concerned about it.  I assumed, and the rest of this guess, the webcam is not working and it is one of the symptoms.

  What is the manufacturer, the brand and model of the webcam?  How did you install it or did you just plug it and expect it to work automatically (maybe it's a plug-and-play USB)?

  Are you sure that the webcam is compatible with your version of Vista?  Look at: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.

  Make sure that the appropriate software/firmware or drivers are installed for the webcam.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  Search for one or more connected to the webcam and confirm that they are operable and functioning properly.  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get those for the webcam to all least, even if Device Manager indicates that they work - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  If there is any software or firmware as well (from the website), make sure that you install that as well in the order defined by the instructions (sometimes the order of the questions includinding if or not it is done while the device is plugged in or not).  The site may also include installation guides and/or the user manuals that can explain the purpose of the light and what it means when it is on or off and how to turn it on if it should be on to operate.  It is very difficult to help without details on the webcam as each works differently.  Actually, I don't even know if that's a mouthful in by USB to firewire or else however.

  I think it is unlikely that it came with no software, firmware, or drivers of any kind (mine did).  After plug in and do all the installations are required, go to start / Control Panel and see if there is a new icon for the Webcam and if so, click on it and try to configure it to work with your system by following the instructions.  If not, then click on start / all programs and check if there are no new software installed that associated with the webcam and if so, click it and follow the instructions to set up.

  I hope this helps.  If not, post back with detailed information (enough so that we can find the manufacturer and the specific webcam online) on the webcam and we will try to help you further in the establishment knowing that additional information.

  Good luck!

• What does mean when the "dumpling" is gray?

  CS4 on Mac.

  What is an Illustrator trying to tell me when the circle on the right side of a description of the path inside the layers panel is filled with gray?

  

  I'm sure that the circle has a name - I called him 'meatballs' in the title because I remember that one of the instructors on Lynda.com referred to her that way.

  It is the symbol of target. The trainer should told you that it is linked to appearances. He tells you that he has applied special appearances (for example, an effect or a second fill or stroke). Click on the symbol for target, and then open the appearance Panel to inspect the appearances.

• How to convert the pulse signal line single layer

  Hello

  I tried to create a VI that will allow me to convert a pulse signal (generated by a tachometer) in a line single layer, indicating that a revolution succeeded. I would like to overlay this line on other signals generated.

  I am able to detect the falling edge of the signal, but I could not make a suitable line. I tried to create a new waveform, and juggle the markers, but no method worked for me.

  Does anyone have ideas for a good way to do this?

  Below is my test VI.

  

  Make the second vertical lines style trace (trace style: no points, no interpolation, fill - inf). a NaN whener you don't want a power cable and a '+ inf' when you want a vertical line.

  Here's a simple example:

  

• Apply the feather to a single layer

  Hello

  I am created an announcement of both parties.  One of the two parties (on two different layers) has a background image I want only the center appears and the rest I would bleach (about 90% opacity, leaving 10% of the visible background image) using feathering, as described in the pen in Photoshop with quick mask Selections

  So, does anyone know how to apply these feathers on a single layer?

  Thank you!

  -Ron

  Create a layer mask and apply the pen in the properties panel.

  Could you please post a screenshot with the Panel visible layers?

• What happens really when the voice to text is slow to respond?

  I feel that, in my opinion, we all experience a large part of the time: you're in Messages or Mail app and you tap the microphone icon to dictate text into a text message or email.  But you start talking your just text appears on the screen as he usually does. You try to speak slowly, but still nothing shows up.  Sometimes it's enough to tap on DONE and then sometimes if you wait 10 seconds or more, then all your spoken text could spills onto the screen.

  But sometimes not.  Sometimes things seem to just having plugged between you and the server (is that the same server where Siri is converted?) and all that you talked about everything is lost.

  I know that if I wait 5 or 10 or 30 minutes, finally what was butcher the son or the network will clear and I can dictate new text.

  But I've always been curious: when he's stuck up like this and your intervention does not immediately display on your screen when you speak or does not flow even out after you typed DONE, what actually happens?  This is likely to get stuck? Is it just that too many people do so at that time, or something else?  And I thought that IOS, 7 or 8 voice-text is processed locally rather than on the Apple servers?  Or is it just Siri?  I actually invokes Siri when I do this?  All thought help it would be appreciated through.

  You are right about many testimonies

  http://speechrecsolutions.com/iPhone5.html

• What to do when the hard disk is full, but is not

  I have installed a larger hard drive, installed all my files from a backup disk and now I get the message that my disk is full.what is the cure

  What to do if everything you do when you get this message?

  It is not completely unknown for an error message give wrong information about his cause.

  What process did you use to restore the backup?

  If, for example, you backed up and restored as a full score then the restored partition can be the same size as the original, even if there is space on the disk to expand it.

  TT2

• What to do when the administrator of the computer is missing

  turn on the computer of the computer administrator when sign is missing and the portion of comments don't leave me in the only required information

  You use the built-in account named 'Administrator' and you just create a new account?

  What version of Windows are you using, including the service pack (if it isn't, of course, made a click right my computer and select properties)?

• What to do when the HP PSC 1510 printer rolls do not feed in the document

  There is paper in the tray s supposed to be inserted, the device is on, the ink cartridges ink and all the cables are well connected but when I click on the 'Print' button, the book is not out to print and it keeps telling me that "the printer is out of paper".

  This printer was working fine before. This problem occurred after it has not been used for a fe weeks. It seems that the roller does not pull paper in the printing machine.

  Any suggestion that can solve this problem would be highly appreciated

  Normally dirty rollers cause this problem. The document below the link should have instructions for cleaning the rollers, as well as additional measures to try. If this does not work, you will need to replace the printer. Let me know what happens.

  http://goo.GL/yhLhv

• What to do when the driver cannot be installed

  my hard drive will not read my CD. I tried everything I know. Installed the patch program, but it says driver cannot be installed. I need an answer on what to do about it.

  Lillian Day

  Hello

  Don't forget to start as admin.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Can someone help me what to do when the message in PhotoshopCC: can't answer your request because can not find the file. Thank you!

  I installed Photoshop CC, no problem. At the time when I try to open a .jpg or even a .psd file formal, I get the message: can not respond to your request because it cannot find the file. I would be very comprehensive to know what I'm doing wrong. Thank you very much! Hans Plompen

  What operating system do you use?

  That could be caused by the update to camera raw 9.5:

  https://helpx.Adobe.com/camera-raw/KB/error---file-was-not-found--when-opening-JPEG-files. HTML