What is a hot temperature of processor for a hub of VPN3030

I have a VPN3030 hub with a red icon of temperature, but the CPU is reading 33 c/91F. This doesn't seem to be hot for me. Normally, the icon shows a thermometer with a red bulb, or it will be green below a certain temperature?

Thank you

3080 3015 VPN concentrator model includes two sensors of temperature on the main deck: one near the CPU and the other near the power supply cage. 3005 model has a sensor near the CPU. This table shows the temperature at the sensor. Temperatures between 0 ° and 50 ° C (32 ° and 122 ° F) are acceptable. Values outside of this range to raise a material event.

Tags: Cisco Security

Similar Questions

  • HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

    I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

    The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

    According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

    What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

    Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

    Also if this from the Manual:

    Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

    So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

  • Where can I find what should be my temperatures of the CPU for laptop HP Pavilion DV7-6195us?

    I download a software to view the inside temperatures and even if they have little symbols (green check, red/yellow flame, etc.) by every internal part (e.g. CPU0) I want to know what HP internal temperature range is recommended.  Thank you.

    What CPU is installed in your laptop?

    It isn't really a question of what HP is recommended. Your concern should be what the CPU manufacturer lists as Tjunction for the CPU.

    If your laptop is the Intel Core i7-2630QM installed then lists Intel 100 c as TJunction. I found the technique for your laptop here. You should be concerned if you see time > 85 degrees Celsius. Here is a link to Intel for your processor plug.

  • What is the best processor for my Vostro 1510?

    Hello!

    I want to upgrade the processor of my Vostro 1510, willing now to an Intel Core 2 Duo T5670 (1.8 GHz). I would like to know what is the best processor for this laptop, can you tell me? (I don't know the exact model of motherboard)

    In addition, the laptop has 3 GB of RAM, I would like to know if it supports 4 GB of RAM with another CPU? and if it's possible to upgrade to Windows 7 64-bit (Windows 7 32 bit)

    Thank you very much!

    Hi Michelleacc

    Please write to us.

    Following processors are compatible.

    T5870, 2.0, 2 MB, 800 MHz

    T7250, 2.0, 2 MB, 800 MHz

    T8300, 2.4, 3 MB, 800 MHz

    T9300, 2.5, 6 MB 800 MHz

    T9500 2.6, 6 MB 800 MHz

    T8100, 2.1, 3 MB, 800 MHz

    in regards to memory, you can go to a maximum of 4 GB only.

    The machine come with windows 7 factory?

    We provide system tag #, e-mail address and your name via private message, by clicking on my name in blue and then select send a private message

    Concerning

  • What is the latest version of Firefox for my laptop from August 2011?

    I'm running Windows 8 (xp) and you plan to switch to Firefox. I would like to know what is the latest version of Firefox for my laptop?

    Do you mean IE8? Windows 8 was not released.

    You can use the latest version, Firefox 5.0.1. Look at the system requirements carefully to be sure that only what is necessary, especially the Pentium 4 processor and enough RAM since many XP systems came with only 256 MB. Right-click on the 'My Computer' icon on your desktop and select properties for the basic information about your system in the 'General tab '.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  • Satellite M70-164: what is a default temperature of the HARD drive?

    I wonder if someone can tell me what are the default temperatures of the hard drieve of a satellite M70-164

    Hello

    It is not easy to say. It is based on the use of the HARD drive.
    If the turns HARD disk and OS write or read on/from the HARD drive, so the temperature increases, but if you use the laptop only for internet, so the temperature of the HARD drive remains on the low level.

  • Qosmio F20-155: what is max CPU temperature?

    Hi all

    Anyone know the maximum temperature of the processor for F20 - 155?
    The temperature that cannot be exceeded.

    Kind regards
    Akram

    Hello

    As far as I know this device was delivered with a CPU Intel-Pentium-M (Dothan) 770 2.13 GHz.
    I found this page that the maximum base Temperature is 100 degrees Celsius
    http://www.ThinkWiki.org/wiki/Intel_Pentium_M _ (Dothan) #Thermal_Specifications

    I think that the operating temperature should be around 60 C.
    Information on the Intel site, you should find:
    http://www.Intel.com/products/processor/PentiumM/index.htm

    But computers laptop Toshiba supports an overheating protection. If the temperature is too high and the temperature increases at critical level the notebook will automatically stop.

  • Is my processor for my HP Probook s 4720 extensible?

    I don't know if this is the right place to put this, but I was wondering if the extensible processor for my HP Probook s 4720. I obviously will not do it myself, but if I had to take it to a store or something that I would be able to buy a better processor to put inside my laptop?

    Hello:

    Here is the link to the service manual for your laptop.

    http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02046514/c02046514.PDF

    Please refer to Chapter 1 page 1 for the list of supported processors.

    Since you don't mention what processor you have in your laptop, I leave to you to decide whether or not is of value in upgrading to the maximum supported processor (i7 - 620 M).

    You can expect to pay at least a few hundred dollars or more to have a shop change the processor for you.

  • Is it possible to upgrade processor for EliteBook 8560p

    This EliteBook 8560p currently offers 1618 KBC Version 97.4 ch. card system, I updated the BIOS to Version F.29 68SCF and the current processor is i5 - 2520M to 2.5 GHz.  I think that it is a quad core - when I look in device under processors Manager I see 4 of them.   The chart is the Radeon HD 6470 M.

    Is it possible to upgrade the processor for this machine, and if so what would be the best processor performance to upgrade to.  Thanks for any help

    Page 90 of this guide details the processors that should work with this system with the corresponding CV part number.  The list seems to have controlled performance with the celeron processor is the processor down.  It also details the process to upgrade the processor.

    Review Erico document may be useful to consider before upgrading the processor, because he has some useful information.

  • What resistance the Thermocouple VI convert use for thermistor CYC?

    What resistance the Thermocouple VI convert use for thermistor CYC?

    No, I do not claim that. I was just trying to interpret what you said.

    You indicated that you were using the Thermocouple convert VI. VI has a 'Sensor CSF' entry, and it can a value "Sensor IC" or "thermistor". So, I assumed you were talking about using this VI with "Sensor of CYC" = "thermistor". In this case the VI calls the convert thermistor reading VI to convert the voltage to temperature. It uses the default values for the resistance, and I guess that's what you were asking about. If you open the Panel before convert thermistor reading, you can see what resistance values it uses.

  • Can I change the processor for x 61 Tablet?

    I have x61t with 1.6 ghz processor. I got what I wanted screen sxvga as processor 1.8 ghz option force give me this screen. Now, I find that the computer is very slow... (with 3 GB of ram)... My hard drive is 7200 RPM.

    So can I upgrade my processor 1.6 something like 2.4 form or more

    I'm carzy

    (I asked this question in other forums but no satisfactory answer)

    Hello

    IM using the config you mentioned (with turbo mem option & without fingerprint reader)

    The processor is not nested. You must change the map system or if you dare, resolder the processor.

    There is a certain post on this issue.

    2.4 can be uncomfortable on your hand (try to keep the core 2 with standard processors old fujitsu Tablet).

    The air coming out of the vent is uncomfortably hot. You don't like if its sitting on your knees/hands to max speed.

  • Pavilion 500-270: looking to get a new processor for games

    I'm looking to upgrade my processor for games. I currently have:

    CPU: Intel Core i3 4130 (dual-core) synchronizing to 3.5 GHz (socket LGA 1150)

    Mobo:HP 2AF7, Intel Haswell H87 Chipset rev 06

    8 GB RAM

    Graphics card Intel HD Graphics 4400, but also a NVIDIA Geforce 3900 GS graphics card

    Is there any particular processor (preferably less $ 200) which would be good for gaming?

    Please let me know what you recommend.

    Thank you

    Hello

    Review the processors that are updated approved for HP 500-270.

    I suggest that you consider using a discrete graphics card before the upgrade of the processor.

    Consult this publication of the article.

    The NVIDIA GTX 750 graphics card would be a good choice for the games with high settiings game support.  Looking for a 750 that does not require a power supply connector 6-pin PCI-E auxiliary.

    HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

    These articles HOWTO HP should be useful.

    If you are in the high-end gaming then the cost will be closer to $400.

  • Video and processor for a pavilion of m8187c upgrade?

    I have a pavilion of m8187c and I would like to to level the CPU card and video.

    Right now I have an Intel duo 6750 and Nvidia 8500gt.

    Does anyone know the CPU the faster I can get away with in this computer?

    Also, how on the video card, I want to get the Nvidia XFX GeForce 9800 GTX, would - this work or even fit?

    Thanks for any help.

    For EXAMPLE, here is a link to the "Product information" pages for your computer:

    http://h10025.www1.HP.com/ewfrf/wc/prodinfoCategory?LC=en&DLC=en&cc=us&lang=en&product=3461915

    If you open the link on the page entitled "Characteristics of the motherboard", that's what you'll see:

    CPU/processor

    • Socket: 775
    • Compatible with the following processors:
      • Intel Core 2 Quad Q6xx0 Quad Core technology
      • Core 2 Duo E6x00
      • Core 2 Duo E4x00

    You can install the CPU the fastest there is on this list.  They should all work, as long as, the power is identical to the original.

    Now for the video card.  I like your choice of cards.  I was actually looking at the same map myself.  It's too long for my rig, however.  I was emailing back with XFX technicians for several days.  I think that it is 10 "long.  Here is a link to the XFX site compare different 9800GTX cards:

    http://www.xfxforce.com/en-us/ShoppingTools/ProductComparison.aspx

    They are 10 '' long as I said.  You need to open the case and measure your existing card; including the power connector.  In addition, the remaining distance to the nearest obstacle.

    You may need to change your current diet, also.  The 9800GTX takes power connectors '2 6-pin.  You can check out while you're in the case to see if there is an additional connector 6 pin.  It can be hidden in a one out of place in the case.  As a result, search every single hole.  The Tech told me not to use the adapters provided with some cards use molex connectors.  It is only for temporary situations; not for permanent use.

    I have a 600W power OCZ GamerXtream and there are 2 connectors.

    I hope this helps.

  • HP Compaq Presario CQ60-404SA is laptop possible to upgrade processor for AMD 64 X 2 TL - 60

    HP Compaq Presario CQ60-404SA is laptop possible to upgrade processor for AMD 64 X 2 TL - 60 will perform like now Vista premium 64.

    What CPU is currently installed?

    Download and run CPU-z as the quickest way to say.

    The following CPU is compatible with your system notebook\s card. The processor AMD X 2 QL-60 and QL - 62 are your best compatible options.

    AMD Turion Dual-Core
    (1 MB L2 cache)
    Processor 20 GHz ■ RM-70 X X
    Processor 2.1 GHz ■ RM-72 X X
    Athlon™ X 2 Dual-Core AMD
    (1 MB L2 cache)
    Processor 1.9 GHz ■ QL-60 X X
    Processor 2.0 GHz ■ QL-62 X X
    Sempron™ Single-Core AMD
    (512 KB L2 cache)
    Processor 2.1 GHz ■ TR - 42 X X
    ■ If - 40 2.0 GHz processor X X

  • What is the hot spot?

    Hi there;

    I read some content on the data warehouse, and I met a sentence as such:

    (context) Hardware and i/o considerations in Data Warehouses-> automatic interleaving->

    "For probes of index (for example, within a nested loop join or parallel index scan interval), interlacing of operating system allows you to avoid hot spots by evenly distributing I/O on the discs." http://docs.Oracle.com/CD/B10500_01/server.920/a96520/hardware.htm


    What is the hot spot? Could you please explain briefly; Thanks in advance.

    Post edited by: tahasozgen

    Hot spots: a quarrel of disc, i.e. when an individual disk drive is overloaded with e/s and have the ability to answer within the time scheduled or desired. The term dates with database I/O performance, where a relatively small segment of the database (hot spot) is responsible for a high number of disk bed and written that overloading a single disc.

    StorageRap: How wide distribution eliminates hot spots and displays excellent performance

    Concerning

    Girish Sharma

Maybe you are looking for