What is a HP ENVY TS 14 Sleekbook?

Similar Questions

• Battery problem: HP Envy 6-1006sa sleekbook

  Hi guys forum newbie here just want to ask you a few questions.

  I recently bought a second hand HP Envy 6-1006sa sleekbook and I love it.

  It was installed at that time, I bought and showed a remaining time of Windows 7 "'8.5 hours" 100% charge on 'power saving mode'. "

  I then he wiped and installed Windows 8 and I'm off the amount of time out of the battery. The maximum amount, I get right now would be 6 hours in power saving mode.

  Can someone help me understand this? Am I missing some HP battery backup settings, software or something?

  Thanks in advance for any help guys I am very grateful that you take the time to answer.

  HP Envy 6-1006sa

  Windows 8

  HI paradiddler86,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you purchased the HP Envy 6-1006sa sleekbook of second hand and upgrade to Windows 8. After the upgrade, the battery on energy saving, life shows that less than what he did originally. Here are links to documentation to help you with this. Test and calibrate the battery (Windows 8) and improve the performance of the battery (8, 7, Windows Vista). I hope it's useful.

• Network keeps falling and reconnection - HP's ENVY touchSmart m6 sleekbook.

  Original title: HP ENVY touchSmart m6 sleekbook keeps falling and reconnecting network connection

  While on the website connection is deleted without warning and after a few minutes reconnects to the server used previously. The computer is new with window 8. Try to find out what causes gout and prevent it from happening.

  I had the same problem with mine.  I'm still not sure I fixed it completely, but I found that there are two network cards installed and disabling one of them seems to help.  I found it under device manager.  I have disabled the microsoft network card.  I hope this helps.  Good luck!

• HP ENVY m6-k010dx Sleekbook: ACPI\HPQ6007\3 & 2411E6FE & 0 driver

  Hello! my HP ENVY m6-k010dx Sleekbook will not start and I replace it with a new one. I managed to re install the drivers except this unit... ACPI\HPQ6007\3 & 2411E6FE & 0. Any help would be appreciated. Thank you and God bless!

  Hello

  Please try for HP 3D DriveGuard Software

  http://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61291.exe

  Kind regards.

• What models of HP Envy 17 has two locations of hard drives?

  Anyone who could tell me what models of HP Envy 17 has Bay hard drive dula?

  Also I intend to order "HP ENVY 17-j008eo" someone knows if it has two hard disk slots?

  Here is the product Web page: HP ENVY 17-j008eo http://h20386.www2.hp.com/swedenstore/merch/Product.aspx?id=E3Z66EA&opt=UUW&sel=PCNB

  Hello

  You are welcome

  I agree that's not very good information.

  As I said, the model that you are considering buying is very similar to the one I'm currently using and it definetely will be 2 drive bays - in fact all the Envy 17, m7, dv7 models etc. have 2 drive bays.

  One thing you should do some before you buy, is that all disk Caddy and the necessary cable to install a HARD drive in the Bay from 2nd is available where you live - for example, if you are in the United States, they are available here.

  Best regards

  DP - K

• HP ENVY m6-k010dx Sleekbook - Windows 7 drivers

  I have a friend who bought a HP ENVY m6-k010dx Sleekbook with windows 8 on it.

  I removed 8 and put on 7. I am looking for windows 7 drivers bluetooth and ethernet but can't find them.

  Can someone point me in the right direction?

  Hp machine support page lists only the drivers of windows 8.

  Hello:

  You need this ethernet driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105075-1&cc=us&DLC=en&LC=en&OS=4063&product=5282147&sw_lang=

  You need this driver BT...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_130390_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP envy 6-1019nr sleekbook: cursor stops working

  I just bought a new hp envy 6-1019nr sleekbook today and I get a pop up on my screen with a square and a helping hand, with a red line through it. Then a red light to the left of the cursor on my laptop and the cursor stops working. I have tried everything to make it work again, but it won't. So, I have to stop it and turn it back on again to make it work. It happens just randomly! Help please!

  Hi @raynelle

  Welcome to the Forums of HP Support!

  I understand that you are having problems with your new laptop, and I'm happy to help you. Since you posted this a few days ago, it is possible that you have already solved, but otherwise, there are a few things you can try.

  First of all, this icon is not immediately or after a certain time after the installation of other software? If it appears after a few updates, then you could try a system restore.

  Using Microsoft System Restore (Windows 8)

  Another quick option is to call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  If you had to do you have someone on the line help you through this.

• Recovery HP Envy 4 Ultrabook (Sleekbook) after Windows 8.1 update course

  I'm working on a model of ultrabook (sleekbook) of HP Envy 4 4-1115dx for a friend. They said they tried to upgrade to Windows Update 8.1 and it has not worked since. There was a black screen with an error that says "boot device not found" hard drive (3F0). I tried everything I can find on the internet to try to address this. I ran Diagnostics of hard disk (short and long), and the order is placed. I have reset the BIOS settings by default, Secure Boot disabled, enabled Legacy Boot and I have somehow or another managed to access a screen that shows the RAID settings and I put the hard drive in non-RAID (probably an error). During all of this, I ordered a USB hp recovery and when it starts I get a warning that says "not recovery support to the title of the current configuration, please activate the acceleration for Intel Smart Response Technology option and try again." I can't find this in the BIOS anywhere (turning power of boot technology fast Intel does nothing.) Through what seems to be something that you configure in Windows leading to the top of this post. I tried all these parameters before and after changing the RAID settings. So now I have a recovery USB which does not seem to work on this work and the drive tests very well. I could shoot the SSD drive, if necessary, but I was trying to avoid that, because you have to take the whole computer part to access. Any suggestions?

  Well, I feel like a fool. I was misunderstanding the SSD as drive JUST before I realized it was both. The normal hard drive was dead. I put a new hard drive in it after removing the bottom of the laptop and the provided HP recovery USB what worked perfectly. I kept thinking there was a partition on the SSD that I didn't see or format. It was just a plain ole doesn't have a hard drive. Thank you very much for your help.

  dk1

• Connection WiFi guard fall on my new laptop of HP ENVY m6-k025dx Sleekbook.

  Hello

  I just got my laptop new HP ENVY. Name of product: m6-k025dx. It works on 64-bit Windows 8. I feel a sudden loss and frequent my Wifi connection. When it disconnects, I don't even connect it to cursor (that slides off the right side of the screen and displays the network list) by clicking on the network down button to the right of the screen. I have to restart my laptop to connect again and after 5-7 minutes, I lose again.

  I have tried many suggestions on the amendment to the Plan of power for maximum performance and uncheck "Allow the computer to turn off this device to save power", but nothing seems to work.

  The network driver is Intel Centrino Wireless - N 2230. I have also updated the driver and off Bluetooth and ethernet as part of suggestions found on the web.

  I don't know if it is a problem of Windows 8 / Intel / HP. Help, please.

  Nadeem

  From my own research, if you have an intel centrino N - 2230 network adapter and use 8 64-bit windows, you need a new driver. This adapter has connectivity wifi which are known for problems intel. Check here: http://www.intel.com/support/wireless/wlan/sb/CS-025332.htm and then contact an HP tech via chat and they correct Web site, download and install the new driver from intel. I tried to do it myself, and it did not work. The technology did for me by online chat and remote assistance. Do it for what they tell you it's a hardware problem. It's a problem of network adapter that requires an updated driver. Let me know if it works for you.

• Repeated I'm Sure and put far to 8,1 HP ENVY m6-k088ca Sleekbook

  Hello, I am very sure that this question has been asked. However, I just got my phone yesterday and I'm not in the mood to look around the different responses that may even be of a month. Well, it's a month later now and I don't know what is happening.

  I didn't exactly read before updating my laptop so then there was a perfoarmance and problems evident past so I reset my computer all (not much). When it's ok to put the 8.1 update 8.1 or what I do not have the installation

  Here's a link to 8.1 Windows drivers available for your sleekbook.

  Audio beats shouldn't be a problem. Thedriver audio Intel IDT will install that.

  Cool comes to install the driver that you may be able to find in the Intel Download Center.  I ask HP why it is not present in Windows 8 driver downloads. It may have been overlooked by mistake. I'll let you know when HP answer my question on the non availability of the driver.

  A recent OS upgrade installation always has its drawbacks. It is the cost of being an early adopt. I received my ultrabook HP touchsmart 2014 ready product spectrum 13 a few days ago. It was delivered with Windows 8.1 and I really like it.

• HP Envy m6-k025dx sleekbook

  I wonder if this particular model of Envy is able to return from Windows 8 on Windows 7?

  Hello:

  Looks like you can use all the W7 x 64 drivers and this model on this one, except the graphics software and the wireless.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=6521374#N536

  Graphics card:

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23644&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType =

  Wireless: I would need to know what model of laptop Intel wireless card is.

  If you are unsure, go to Device Manager, expand the category network adapters and you will see the name and model of the card WLAN Intel that are listed there.

  Before installing W7, make sure your media recovery W8 first where you want or need to reinstall W8.

  Do not bet on the recovery partition works for you.

  Here's how the recovery media if you have not already done so.

  http://support.HP.com/us-en/document/c03481733

• TouchSmart HP ENVY 14-k111nr Sleekbook Drivers - Windows 7 64 bit

  Hello

  I'm trying to get drivers 64-bit of Windows 7 for this: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=6841179&

  TouchSmart sleekbook and can't find what works.  I tried those many other posts and am not having any luck.  Are there drivers for this particular model?

  Thank you!

  You are the very welcome.

  Here is the link to the wireless card driver you need.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405431&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D3%257CswItem%253Dob_129459_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Cannot install Windows 8.1 update on my HP Envy TS M6 Sleekbook

  I have all of the current drivers and software.  It came with Windows 8, and I try to install 8.1.  He does it well until you restart.  I do the reboot and it gets halfway through and the screen will Dim and hours later, the screen is still dark.  "I press the power button and it says something like: trying to find install ' and from there nothing happens.  Finally, I end up having to go back to windows 8.   Your help is appreciated.  From what I've read, 8.1 is maybe a problem

  I haven't posted in this forum, because I've had my laptop ENVY workshop of repair of HP in January. HP has not load 8.1 then even if I asked what she and the Cat Lady said they would. I decided to stay with 8.0 until HP told me that it was OK to download 8.1. They never have. A couple of weeks, I was downloading updates of the application and one of them has required 8.1 so they have downloaded 8.1 without my concent. At the time I realized what was going on it was halfway through with the installation. It was completed without a hitch, so they must have fixed the problem. I have not downloaded and installed updates 8.1 still pending. I also noticed that the PC is faster when you access web sites with Windows Explorer, so it's worth. Except that I don't notice much of a difference.

• How can I find out what model of HP Envy 15 I have?

  Hi guys,.

  I can't identify what model HP Envy 15, I use.

  My product code is: WQ734UA #ABC

  Well maybe I was ID perforating the code in google:

  HP Envy 15-1270 ca Intel Core I7-720QM 15.6 IN. LED 8GB 640 GB Ext. DVDRW Radeon 5830 1 GB W7HP Notebook

  but HP does not recognize this model under Support and drivers.

  Can anyone help clear this up for me?

  See you soon

  Hello:

  This is the page for support and drivers for your PC.

  http://h10025.www1.HP.com/ewfrf/WC/product?product=4221246&CC=US&DLC=en&LC=en&os=228&Query=%20WQ734UA&sw_lang=&Tool=

  Paul

• What temperature should we Envy 4 HP 1030us?

  What is the temperature of safe operation for my laptop?  At what temperature should I expect slowdow (as self-protection) system?  Can someone look at my readings and tell me if I have a problem?  Suggest this temperature I need to open the laptop and clean it?

  I checked the website of Intel, but they do not include a number of temperature useful for this model, which is not 'case No. temp', the only number is tJunction, which is 105 degrees Celsius, which must be melting.   I had unusual behaviors at much lower temperatures.  Image including diagnostic tools of temperature with must-be-bad-flame symbol.  I've read about en.kioskea.net safe temp for i5 is 70 degrees Celsius and 100 for latops - it's really hot.

  http://imgur.com/RBy49Wd

  Hello @DavidENJ,
  
  I see you have a few questions with temperatures. I'll try to answer for you.
  
  If at any time you worry about temperature, it never hurts to clean the laptop. This does not mean extraction it leaves again heat etc... Just a nice spray with little around the vents and fans canned air is usually more then enough to help lower time.
  
  This document may be useful in this regard too: reduce the heat inside the PC to prevent overheat.
  
  Looking at your screenshot, however, I'm jealous. I wish I was getting very good time. You're reaching lows of 35 ° c, for a max of 66ºC. All three utilities are very close with the reading. This is the good time especially on a laptop.
  
  My office, I am currently starting to 90ºC it will cool to about 70 ° c when idle. When I have the game, I push the brand 100ºC - usually pp. 97-99. It was bad enough to run my office, I had to close 2 hearts in my i7, as with all 4 is just stay pretty cool running (need to replace my radiator).
  
  Each mother/card motherboard in newer computers will have a temp were shut down, to avoid "fade downs." For mine, it comes to 100ºC on all hearts. Your laptop could be 105ºC on two nuclei.
  
  In general, you want to run around the range 40-45, computers cell phones can be more hot 45-55. It is slow, if you run cooler is always a plus. If you notice with loads heavy (a lot of things going on) you are temp must and can increase to up to 30 ° c (maybe less). Thus, under a very heavy load (games, streaming, etc) you could run at around 70-75 ° c, it would be 'normal '.
  
  It may still be hot, so a good solution can be added to a cooling tray. With this, however I recommend one that has its own power supply. If you get one that plugs into usb, you do only the computer work hard, he will always have a positive effect.
  
  in any case, I hope that this long-winded spiel somehow helped you.
  
  Thanks for posting on the HP Forums.