What is a user of the NETWORK and how to disable this user by CMD?

Similar Questions

• "lcwipx.exe of shortcut that you refer to is not available" and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?

  When connect my external hard drive and opening not wanting my my files, I get this message "shortened lcwipx.exe you make reference to is not available"and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?

  Hi Pascal,.

  I see that you get an error trying to access files on an external drive. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. What is the brand and model of the external drive?

  3. what security software is installed on the computer?

  4. have you made changes on the computer recently?

  5A external drive earlier good work?

  6. have you updated to Service Pack 2 installed?

  Method 1.

  Connect a different drive to the computer and check.

  Method 2.

  Plug this external drive on another computer and check the status.

  Method 3.

  Start the computer in safe mode and check.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  Method 4.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• My function paste decides to stop working randomly. What could be the problem and how could solve this problem?

  My function paste decides to stop working randomly. What could be the problem and how could solve this problem?

  A repair from the Vista DVD installation.  Don't forget to have a backup/restore point just in case.

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• I have to re - install acrobat 9 standard because of "impossible to extend the license procedure (148: 3). Where can I download? Or better yet to upgrade to XI (what is the price and how to do this)

  I have to re - install acrobat 9 standard because of "impossible to extend the license procedure (148: 3). Where can I download? Or better yet to upgrade to XI (what is the price and how to do this)

  Hi riffpizcy,

  148: 3 error is a license error.

  Try following the steps in the KB: error "Licensing has stopped working". Windows

  You can download Acrobat 9 standard of: https://files.acrobat.com/a/preview/8d640488-4a92-4f7d-b50b-d8eb7f96bff8

  You can upgrade to Acrobat 9 Acrobat Pro 11 to $199 USD

  Please visit: buying guide | Adobe Acrobat Pro XI for more information.

  Kind regards

  Rave

• What is BBThumbs.dat and when and why it created in the emulator and how to disable its creation?

  Hello

  I download a bunch of binary files from the server to a directory under "file:///SDCard/myfolder/".

  I notice that in the emulator sometimes BBThumbs.dat is created in this folder.

  Is there a way to disable the creation of this file.

  I use JDE4.3.0.

  I would appreciate any idea on it.

  -MO.

  the blackberry creates a thumbnail of each image in the file and stores it in this file when you open a folder.
  When you open the folder again the thumbnail can be recovered (if the hash matches) in the dat file rather created, it's much faster.
  Windows did the same thing btw.

• What is a directory of the application and how do I install/copy inside binkw32.dll?

  OK... the first thing is that I installed a game... works very well.

  I then tried to open one of my friends mods... nothing happened. He said he had to be reinstalled... so after many hours, I found a way to do it. but it usually always open. I now get a message saying that it must be installed in the application directory.

  I need assistance in detail please... not very good with this stuff I don't want to spoil it im.

  -What game?
  «' ' ' Exact error message?»» "»
  -Is Windows 7 ccompatible?

  Directory of the app in this case (similar) would be the "system32" directory that houses all of the .dll files.

  System32 = C:\Windows\system32

  You can just download the files "binkw32.dll" from a site (absolutely), you trust and drop it into the system32 folder.

  Note that downloading the files .dll from other sites has its own drawbacks.

  Or reinstall the game. Install as "admin" - right click on the installer and choose 'run as administrator '.

  If the game is not compatible Windows 7, try to install in compatibility mode XP/Vista:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  MRI!

• Satellite Pro A200-PSAE4E - what BIOS I need for the update and how?

  Please on A) the correct updated version needs to B) process

  (A) the machine came with Vista installed, but it has been ranked towards the bottom to XP works on Win2003/XP network.

  The current bios to V5.20 do update to 2.60 - win 32 (vista) or win 5.60

  (B) Toshiba FAQ - FAQ ref: TRO0000000b07 shows how to upgrade the bios unfortunately it does not list the satellite Pro A200 - then what is the procedure - thanks in advance.

  Hello!

  If you want to update the BIOS, you need version 5.60. Are the other version for Vista and 5,60 only one is for XP and if it s the right one for you.

  The BIOS update procedure is quite easy. The update is based on Windows, which means that you can update it on Windows. So to extract all files from zip archive and run the exe file. Then updated your BIOS.
  But before update you, close all programs running even your AntiVirus and firewall and connect the AC adapter.

  Good luck!

  Good bye

• whenever I discover a file from an email or a Web site in the preview (Mac) it is REGISTERED, any boxes are checked in the preferences. How to disable this option?

  If I open a PDF, Word, Excel, jpeg or ANY type of file it is saved on my desktop (where I put the files to backup). And, this action is done automatically, every time, it's okay that I put in Firefox > Preferences > Applications.

  You can create a new Boolean pref via the context menu with the name browser.helperApps.deleteTempFileOnExit and set to true.

  The pref is still in the source code:

  • http://MXR.Mozilla.org/Mozilla-central/source/uriloader/exthandler/nsExternalHelperAppService.cpp#2208

• Cannot turn off or disable password protected sharing the network and sharing Center

  I'm trying to turn some pretty simple sharing of files between our windows PC (two portable minicomputers running under XP, a desk and a laptop running vista). File sharing functions between the XP computers. However, I am simply unable to influence the "password protected sharing setting" in the network and sharing Center. I check the option to turn it off and I get a click through UAC dialog window, the mouse cursor turns for a short time while as if windows is pretending to do something, but the password protected sharing setting is always on.

  I tried to disable Avira Antivir.

  I enabled the guest account and set its password to a string explicitly empty with net user guest «»

  Nothing helps.

  svampi,
  This knowledge base article can be useful for you.  Although the problem that it is designed for the difficulty is not the same as yours, the underlying cause is the same.  There is an article to 'fix', which means that you can click the 'fix' in the article so that it automatically fixed for you online or you can follow the instructions to edit the registry yourself if you feel capable of doing that.  So check that out and see if it helps with your problem:

  http://support.Microsoft.com/kb/947232

  Let us know if this can help, or if you still need help.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error - Windows cannot login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly. Unable to log-in to the guest account

  Original title: problem: Guest account does not work even after activation due to profile problems.

  After you activate the guest on this system account tries to log in under this account to fail with the message "Failed to load the user profile". According to the information I found online about this error, I checked HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList to see if a key exists since comments (it isn't). I also checked the Windows application log and found the following entries:

  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\Guest\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you close the session
  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows is unable to login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly.

    RETAIL - only part of a query ReadProcessMemory or WriteProcessMemory was completed.

  The path of the C:\Users\TEMP does not exist, and the sqm file specified does not deny entries in its ACL, just full control to the SYSTEM, LOCAL SERVICE, my admin account and the Administrators group.

  I'm running Windows 7 Ultimate x 64 edition.

  Christopher S. Charabaruk

  Well guys,.

  The simplest solution is to read what the error.

  "Cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm"

  I tried a lot of suggestion, but delete the file crazy and that's all working again.

  Beter first remove windows live as well. I only have the first and received the message that something is wong with the installation.

  Hope this has been helpful.

  Commander Paul

• I use iphone 5 s updated to 9.2, but I can not use the network and call :( Please help me

  I use iphone 5 s updated to 9.2, but I can't use the network and call someone help me please

  What happens when you try to use the network?

• After that I closed the lid on my laptop, when I reopen it, I have to keep moving the lid until I can get a picture. What could be the problem and how to fix?

  After that I closed the lid on my laptop, when I reopen it, I have to keep moving the lid until I can get a picture.  What could be the problem and how to fix?

  Hello

  Looks like a loose connector or a short circuit in the video cable. Check with a real
  store computer (one that works on computers cell phones internal ASUStek) or ASUStek
  Support, their documentation and online in their forums.

  Not a maintainable question by the user.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• XP has disappeared from the network and I can't get it back

  My XP machine does not appear on my network more.  My network with both XP and a MAC wireless machines worked fine until I added a desktop Windows 7 computer.  Now, one of my XP machines disappeared from the network and I can not get it back.  I have run the Configuration Wizard from the network a million times, but the device still does not appear.  What I am doing wrong?

  From the other thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/windows-xp-machine-does-not-show-up-on-network/fadc36ac-73de-428f-9018-bedebd72cb2d

  Title: Windows XP machine does not appear on the network after that Windows 7 has been added. Also have Mac on the network as well.

  I set up a home network with two XP machines connected to my router and a Mac with a Wi - Fi connection.  I added a Windows 7 machine and now one of the XP machines does not appear as a member of the Working Group on all machines (including itself!) even after the wizard as many times.  Curiously, I can share files and printers.  How can I get this machine to appear on the network?

  original title: home network problem

  Hello

  The following article might be useful:

  Solve problems with computers not appearing is not in the network map

• How can I add my laptop to the network and connect to the internet as well

  I have internet access on my computer at home, the ipod, the ipad and iphone.  How can I add my laptop to the network and connect to the internet as well?

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  Add a device or computer to a network:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

  For more information, see the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-you-need-to-set-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows/explore/home-networking

  Hope the information is useful.

• How can I connect to the internet? Problems involving the network and sharing Center does not.

  Hello.
  I live in a House and bought a range extender so that I can get a connection in my basement as well.  I have installation range Extenders without problem.  When you install the range extender, I changed my name to my network router.  I changed the name of the network by typing 192.168.1.1 in my browser.
  The MacBook connects without a problem.  In the basement, the connection of Windows 7 works very well.  I have just connected Vaio Windows 7 my mother to the network, but it prompted that I enter the user credentials.  I read a post above and got that problem solved by opening the network and sharing Center and adding a new connection.  Now that the connection is configured correctly.
  The problem is with the laptop HP Windows Vista family basis.  Since I install the range extender, I can't connect to the network.  He had no problems before you connect the router or other networks to visit other places.  The new network name appears, but when I click it, it says I have to enter the user credentials.  I tried to manually, but the name is taken so I can't make a new and invites me to connect to the network that is established or to connect to a different network.
  • I tried to open the network and sharing Center, but it does not open.  When I click it, it opens a screen for a brief second.  The option "Display the status of network and tasks" opens either.

  • I logged as an Administration by entering the command line < net="" user="" administrator="" ctive:yes=""> > and restarted the laptop.  Even logged in as administrator, this folder does not open.

  • I also did a scan < sfc="" cannow=""> >.  The digitized rolled up with an error, but the error has been corrected.

  • I also updated the connection of the range extender.

  Why the network and sharing Center will not be open to the top?
  How can I configure my router my HP Windows Vista Linksys connection?
  Thank you.  Please let me know if you need more information.

  Thanks for your reply.

  In a last attempt, my sister has used the ethernet cable to connect directly to our router.  Next time, she turned on her laptop, she managed to connect to our wireless network and she was not invited to enter credentials.
  In this case, the manual connection helped solved the problem.