What is an adapter series LPS

Similar Questions

• What type of adapter you equip cards sd?

  I am updating from a 3rd Gen with an air 2 ipad.  What type of adapter you put the SD with an air 2? With my older ipad, I used an apple sd card reader connected to the PIN 30. I bought an sd for the ipad Reader 8 pin 4th Gen that was my wife and she wouldn't. I use my ipad for hundreds of photos, all the 8 numbers and DCIM. Thanks for any help.

  node http://www.Apple.com/Shop/Product/MJYT2AM/A/Lightning-to-SD-Card-Camera-Reader?f = 91

  Work on my mini 4

• Is that what the AC adapter compatible 40Y7663 for Advanced Minidock 42W4630?

  Hello!

  I bought a 42W4630 Advanced Minidock used (P/N 42W4631, FRU P/N 42W4630, Type 2504) for my Thinkpad T400 (6474 Type) but there is no 90-W adapter with it. Due to the http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T400-advanced-mini-dock-250410U-POWER-ADAPT... I also ordered a 90W AC adapter 40Y7663.

  But I don't know if the ACadapter is compatible with the docking station. I have not found a suitable compatibility list.

  You have an idea if the power adapter is compatible for my docking station? What would happen in the worst case?

  This adapter works because it's the type of adapter supplied with the advanced mini dock.

• HP 50 g - PC connection series with adapter Series USB and null modem troubleshooting

  I have the calculator correctly connected to my laptop via a USB series adapter, which is plugged into a null-modem adapter, which is plugged into the serial cable sold on HP Calc.org specifically for the HP 50 g. I started XModem on the calculator, but Conn4x found nothing. Is the process different from that used for USB and Conn4x connections? The problem could be with the USB Serial Driver. I use the default MicroSoft driver installed to connect? Are there tests I can run to determine if the adapter is broken, or the computer or calculator. Thank you very much in advance for your help!

  I already tried the following:

  • The two indicators relevant system are correct for the serial communication
  • Tried to reinstall the driver
  • Google for any relevant information that is extremely rare
  • Tried with two Xmodem Kermit servers running on the calculator, press 'Connect' on Conn4X.

  Hi!, Ranothil:

  If you have the following cable "null modem" (http://commerce.hpcalc.org/serialcable.php), you can transfer, all

  data, HP50G, to the PC and vice versa, throughout the connection Kit (Conn4x), without issue.

  Please, see this link, to education, to transfer data with the serial null modem and connectivity kit cable... http://sense.NET/~Egan/SKB/ or... http://www.hpmuseum.org/cgi-sys/CGIwrap/hpmuseum/archv017.cgi?read=125259

  Note: best if you transfer data, HP50G, PC and vice versa, through the microUSB.

• What is an adapter teredo tunneling on my average of the network

  We have a netgear router that has a journal of the history of what happens to the extent of the possible intruder.  There is a teredo of Microsot tunneling adapter has an ip address and a port adapter # and said, entering.  I think it's a user trying to get into our network to talk to one of us and my husband says it's a defintion of a process and is not a user at all.  It stirred the House to say the least, could you please put us up?  Thank you very much.

  SANDI

  http://en.Wikipedia.org/wiki/Teredo_tunneling

• WPS54G with USB adapter series

  Hi all

  I wonder if anyone has had any experience of the present.

  I have a pretty old thermal printer that I want to make it available on our network with the WPS54G. The printer has a connection series and I tried a couple of USB adapters plugged into the serial print server, but unfortunately it doesn't seem to detect that nothing is connected (green USB not clear on the face front of the server).

  A native USB printer works fine via the print server, and I know that the cards are solid, I can print to the printer via the cards under Windows.

  However, Windows detects the card first and install a driver for it when you plug it in and I assume that it is this step that I won't be able to replicate on the print server and so it can't communicate with the printer at all.

  Someone has it conquered or I'm on a losing battle?

  Any help would be appreciated so thank you in advance if anyone can help!

  Kind regards

  Rich

  If this card is connected PC for your priner, I think you also have to install a driver on PC for this card. The adapter converts the signal set to USB, the driver converts the signal from USB to serial. But for the WPS54G this is impossible, so that is why your way does not work.

  http://www.IECI.com.au/products/Product_Page2.asp?product_id=3139

  -Online a series server should be able to work with your printer

  http://www.Dlink.com.au/products.aspx?sec=1&Sub1=13&Sub2=21&PID=120

  -Online a print server with 2 parallel port and a serial port, it should work. This type of print server has a few limitations, may not support GDI printer. Therefore, make sure your printer is supported or not list.

  http://www.digitalhome.com.au/Computers_and_IT/NETGEAR/FWG114P_Wireless_Firewall_Print_Server/435

  => Is a print server USB port, a serial port for external analog or ISDN modem

  http://www.Lantronix.com/device-networking/external-device-servers/Wibox.html

  -Online has two ports Serial server must be able to work with your printer.

  Regarding the series server, you also have to install the driver on your computer.

  Once connected, you will think of it like your printer is connected to your computer. If you have other computers, you can install the driver in them as well. Then they can also use this printer, but not at the same time.

• HP Envy 17-j120sr: what wi - fi adapter is used?

  Hi all

  I am owner of HP Envy 17-j120sr.

  Please indicate what model of wireless adapter is used in this laptop?

  Please provide a link for driver for Windows 7 for adapter wi - fi.

  Thank you.

  Hello

  Download the driver from the link below.

  Model is Intel 7260/3160 Wireless LAN

  http://www.driversguru.com/driverdetail/2151609-Intel+7260+3160+wireless+LAN+driver+for+Microsoft+Windows

• Satellite A200 - 1 M 4; What wireless network adapter is installed

  Hello
  I need help to identify the wireless network adapter for my laptop. Anyone know the type of card?
  Best regards!

  As a first step, we need to identify your model of laptop. ;)
  Please send us the model name and model number. You can find it on the gray label placed at the bottom of your laptop.

• What card PCI adapter USB can I use on my Satellite C

  Hello

  My USB port of remaining work has now passed away, and I'm stuck because I can't print longer (especially children can not print their homework!) I discovered recently the understanding that I can get either the replaced motherboard (expensive so not an option!) or get a * card with USB ports * on what goes into the card reader at the front of the laptop?

  No one knows exactly what I buy as all this seems quite complicated for me!

  Any help would be greatly appreciated! Thank you, Kerry.

  Hi Kerry

  Can you tell us more about your Toshiba laptop?
  What model do you have?
  Have you tested the functionality of all USB ports?
  How old is your laptop?
  I want to say if the warranty is still valid contact the nearest Toshiba service and ask for help?

  You have a new printer with WLAN indoors. If so, you can print using the WLAN connection.

• VS800UT #ABA: help! What external ac adapter is compatible with the HP Compaq 8000 Elite computer PC VS800UT #ABA

  I have searched for days and have not found much information on the AC adapter that that uses this model

  PC product no. VS800UT #ABA

  [Personal information]

  HP ELITE 8000 PC-ULTRA-SLIM

  I know that this PC uses a power adapter with an intelligent pin and will not work if the model is incorrect, even if the Volt amps and power are correct.

  It did not work. 4 PC beeps 2 second break times 5 average (incompatible) or defective or both.

  

  

  model: 647982-001

  Replace with hp spare: 648964-001

   

  ==

  Based on the selector hp model: 592491-001 is the only listed compatible with my PC model

  the back of my PC just above taken power said 19.5 volts

  [Personal information]

  ==

  It would work?

  I do not have it, it seems to have 592491-001 on it, but as a replacement with model number does that mean a cross between these models compatibility is one thing?

   

  

   

  Thanks in advance.

  G31, welcome to the forum.

  Here is information on HP Partsurfer parts to the United States.  It shows the power adapter.  Thus, it may be that it is still available.  Also, here is the illustrated parts and Service card and hardware reference Guide or the computer.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• EliteBook8540w: upgrade HDD on an EliteBook8540w - what HARD drive adapt?

  Hello fellow users of HP laptop

  I own an EliteBook 8540w and wonder what HARD drive I can use to upgrade this box.

  Here are the detailed specifications of the box.

  Processor type: Mobile Quad Core Intel Core i7-740QM, 2100 MHz (16 x 131)

  Card mother name: Hewlett-Packard HP EliteBook 8540w

  Motherboard Chipset: Intel Ibex Peak - M QM57, Intel Clarksfield

  System memory: 8119 MB (DDR3 - 1333 DDR3 SDRAM)

  DIMM1: Samsung M471B5273CH0-CH9 4 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz)

  DIMM2: Samsung M471B5273CH0-CH9 4 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz)

  Video card: NVIDIA Quadro FX 1800 M (1 GB)

  HARD drive:

  The HARD drive I have now is this.

  I assumed that the height of the HARD drive is key here, so not so many restrictions on the HARD drive, is that OK? I could get an SSD as well as long as the height is very well, just?

  Thank you for your help.

  Best regards

  W9Y

  Yes, absolutely. Stick with 2.5 inches wide, 9.5 or 7 mm thickness SATA hdd or SSD. 7 mms are leaner, but the mounting holes are in the same place and the SATA data connector and the power supply is in the same place. You cannot use a 9.5 where only a 7mm is used as on Ultrabooks ultraslim, but a 7mm will replace a 9.5 mm. 7mm fits into the caddy and connectors will still work the drive but does not fill the carriage upwards. Yours is a chunky fellow that originally had a 9.5 mm drive. Sometimes you see disks of 2.5 inches wide from 12mm for blades and those who are not fit.

  If it's in the budget, get an SSD. I'm kinda an envangelist SSD, but you will be too once you have used a.

• What HardDiskDrive Ultrabay adapter and which hard drive

  4 questions:

  (1) using the UltraBay for swaping hot is save that's why Lenovo use ultrabays?

  (2) for the R60 with sata internal wich ultrabay is require (enhanced or other too?)

  (3) and which hard drive goes into housing ultrabay IDE or SATA?

  (4) will it take drivers after putting this place?

  I know a lot of sorry question confuse a little for what I read on wikis.

  Thank you

  Thank you for these two answers, I will be fallow your suggestion.

• need to set the com port for adapter Series USB Belkin need com 1 or 2 default to com8

  I have a belkin Windows serial adapter 7 puts on com8 and I have equipment that does not download that on port com 1 or 2 How can I change the Compote?  I can't change my gear to any other comport com just 1 or 2.  There is nothing assigned to com 1 or 2 on my pc I can find in the hardware configuration.

  Check the documentation that came with the device or on the Belkin support website.  How to change the COM port is specific to the device and its drivers, nothing in Windows that can force this change for you.

• What smart adapter is for my 6910p?

  I need to know what Hp smart adapter is for my 6910p? When I connect my adapter, I get a message to connect a higher intelligent adapter of capacity for maximum performance, then a window will appear with a more detailed message and the message reads as follows...

  The connected smart adapter will power your computer, but potentially at a level of reduced performance. Your computer is designed to vary the performance as required when the lower ability of smart adapter is connected.  Resource intensive tasks can cause your system not to do at the highest level with a capacity more small smart adapter.  Please connect a smart adapter with greater capacity for maximum performance.

  Then I followed the link to Hp.com and did not find my laptop 6910p anywhere. PLEASE HELP ME... Thank you.

  Hello:

  Here is the link to the service manual for your laptop.

  Cards supported with HP part numbers can be found in Chapter 3, page 26.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01566975/c01566975.PDF

  Paul

• Adapter power lost for Satellite A60, do not know how to replace

  I lost the power adapter/battery for my Satellite A60 can use it is no longer.

  I don't know what to replace it with so that I can once again still, recharge and reuse my laptop.

  I would be grateful for any assistance, thank you.

  If you need a new part then visit Web of Toshiba Europe Options & accessories.
  Here, you can choose your model of laptop, and you'll get several pieces and devices that are compatible with your laptop.

  Are you looking for the part number?
  Searching on the net for this part number: PA3381U-1ACA. It s a Toshiba Satellite A60 AC adapter series.
  I think that you get in all countries.