What is levels?

Similar Questions

• Satellite A300 - 234 MODEL NO. PSAGCE. What RAID levels?

  Satellite A300 - 234 MODEL NO. PSAGCE. What RAID levels? 0 or 1? or 2,3,4,5?

  Hello

  As much as I know the laptop does not support (hardware) RAID
  You won't find anything in the BIOS.

  But a software raid was possible;
  For this you need a RAID tool.
  Check this box:
  http://tldp.org/HOWTO/software-RAID-HOWTO.html

  In addition the laptop was equipped with a HARD drive I m not very well if a second HDD could be installed check the second HDD bay if the connectors are available then you could install second HDD

  Welcome them

• What raid level do you use

  Hello

  Just want to hear what kind of raid level you use, type os drive and what kind of applications running on this VM VDi.

  I read a lot of articles of the IOPS / s and I just want to see what people are using...

  Most of the time I saw customers using Raid 5, but here again it depends on what environment you're using which users you anticipate, Basicallt the % of reading and taking Raid penalty and Cache into consideration

  As you say you have read some Documents I found it very interesting http://www.vmware.com/files/pdf/techpaper/view_storage_considerations.pdf

  If you have a document that will help you really share

• How to increase the level of Effort BY?

  Hello

  I am trying to restore a primary application of a number of separate projects of component LVFPGA LVFPGA.  Each of these smaller basic functions is running in their own SCTL in new the LVFPGA master file.  Small functions all meet them timing, but not the master app.

  I use about half of the chip so it seems to me that it should not be difficult to place and route.

  When my compilation fails because of time constraints, he says the following:

  WARNING: By: 62 - your design did not meet calendar.  Here are some suggestions to help you to keep to the timetable in your design.

  ...

  Increase the setting of the level of Effort BY to 'high '.

  Use the 'xplorer' Xilinx script to try special combinations of options known to produce very good results.

  See http://www.xilinx.com/ise/implementation/Xplorer.htm for more details.

  So my questions are:

  (1) how can I increase the level of Effort BY?  Has NEITHER provided a hook for setting this value and if so what is its current level / by default?

  (2) we access level user to the script 'xplorer '?  If so, where is this located and can OR recommend some parameters that are compatible with the SMU-5641R.

  Thank you

  The files in the folder of Xilinx are never overwritten or replaced, these default values are simply not used if you provide your own .opt files to the compilation sequence. For these two products, we provide custom files, I've already mentioned. These custom options are communicated to the server during each request compilation as it must have everything necessary to provide correct results regardless of compilation locally or remotely (or even on a remote compiling the server who has not installed the drivers from target).

  Insofar as you need exactly what settings level effort, which will be dependent on the design. I suggest you look at Xilinx documentation on their suggestions on how to set these options based on what kind of compile questions that you hit. In general, I would try them likely increases in the following (probably with compilation time) order:

  "" plan of access-Calendar - ol std' and ' normal - ol std ".

  'map - calendar - ol high' and ' "normal - ol std".

  "map - calendar - ol high' and ' by - ol high."

  [Or if you will just operate all night and don't care about compile time, you could jump to top/high... and work backwards if you want to use the minimum effort it takes actually.]

  If these don't work for you (or if you want an alternative solution), then you need to review your design and your code to see if you can improve the synchronization in the areas which are at the origin of chess.

  Side-note:

  Modifying the files in the directory of Xilinx does not apply to this situation. I do not know the behavior to change these files, but it would be easy to deduce by experimentation (i.e. edit the file locally, perform a remote generation, see if the changed options were used... If not, then restore the local file, the remote file instead, rebuild, etc.). But even once, it does not apply to these objectives and behavior will be verified based on file by a specific version of LabVIEW file, since it is an implementation detail that may change.

• Level of trust associated with the details of precision in the plug

  What is the level of confidence associated with details of precision in the data sheet?

  Specifically, I am interested in the analog input 9205.  Technical sheet here: http://sine.ni.com/ds/app/doc/p/id/ds-190/lang/en

  There is a table on 2/3 by the document called 'précision Détails', and I would like to know what the level of trust is for the numbers in the table.  The reason is if I can use them in my measurement uncertainty calculation.

  Thank you.

  Now that I read through a lot of a manual of reference for the characterization of the ADC, I believe that the following terms in the table of absolute precision were calculated experimentally with at least 100 data points and a coverage of at least 3 factor:

  GainTempco ·

  ReferenceTempco
  OffsetTempco ·

  INL_Error
  NoiseUncertainty

  The rest of the values are derived from these, or are supposed to be conservative values to the estimate of the error. For example, the variation in temperature since the last calibration is assumed to be 70 degrees, because that's the maximum value supported temperature change in the temperature of the device has been calibrated at.

  Each term in the equation has at least a factor of expansion of 3. Therefore, the absolute precision of the measure has a factor of expansion of 3.

  Jeremy P.

• What hardware, if implemented, will require the user re-activate their version of windows XP?

  What if level materials will require user re-activate their version of window XP?

  If you replace the motherboard or hard drive, you will need to reactivate Windows XP.  Usually, the other hardware upgrades do not trigger an activation request.

• Power levels of Cisco 1572 PA Tx

  Hello

  Anyone know what the Tx power levels available are on the Cisco 1572 access points? I think that the Tx power level maximum APs is the legal limit in the regulatory domain, but I'm more interested in what the levels are on the lower part of the scale. Unfortunately I do not have available to test.

  Kind regards

  Brett

  Hi Brett,

  I think you're looking at these values.

  1572 - powerlevel.png

  

  http://www.Cisco.com/c/en/us/TD/docs/wireless/compliance/reference/guide/1570_EU.html#55419

  Also see this link if you want more details on the technical specifications AP

  http://www.Cisco.com/c/en/us/TD/docs/wireless/access_point/1570/installation/guide/1570hig/1570_axa.html

  HTH

  Rasika

  Pls note all useful responses *.

• Access level display APEX 4.2

  Hi all

  In our application, we have two groups of such permission scheme 'Admin' and 'creator '.

  We have added corresponding users in these groups.

  Now we have a search where to click on the button search it displays two different sets resulting i., e.

  1. for research under the branching key, I put as

  

  2. now, in the regions resulting results I provided like this

  

  3 at the same time I had supplied to the security with respect to the Admin and free creator, it would be 'OID_AUTH_MKT_SELF '.

  

  4 based on those from the top results will be extracted.

  5. now there that don't need to use the authorization scheme, a new table named "User access level" was created, in which it provides user input which belongs to i. what access level, e Self Admin, Super Admin.

  6. how I modify reports to display the resulting based on this new array and function of button.

  Apex 4.2

  D/B 10g

  Kind regards

  Sruthitamiri

  So replace it with schema Type "Exists SQL Query"

  And application of power supply as

  select null
  from user_access_level
  where username = :APP_USER
  

  Scott

• level of service required to save a form at the library

  Esign services (echosign), the trial version does not allow to save a form to the library, to be used over and over again. Should what service level I buy to get this functionality? Individual is sufficient? Thank you!

  Hello Owen,.

  Yes, the individual subscription (sending for Signature) gives the possibility to create library templates that can be stored and used in future transactions.

  Kind regards

  -Usman

• vCOps and vCenter Collection levels

  How the collection-level, I have to configure in vCenter affect vCOps?  VCOps will retain the same amount of statistics and the granularity no matter what vCenter level collection with that Server is configured?

  The collection in vCenter Server level has nothing to do with the vCOps and the data it collects. vCOps collects the most recent data of 12 points since the vCenter on objects - 20 sec intervals * 12 samples = 5 minutes - which fits in the window of statistics since 1 h perf in real time and is not affected by the accumulation of HR/day/week/month.

• Blocking levels/audiometers? -First CS6

  Is there a way to see the audio meters while in the multicam window?

  The audio plays very well, but is there really no way to control the audio to see if its peak or not, or what its level, unless I stop the multicam and read it in the timeline?

  

  All the clips in the source, all of the mounting clips, all clips in project window all activate them the audio levels / counters.

  Why not the multicam? Seems strange.

  If you simply open the Panel "Mixer" you measure audio real time.

• What might be 'parallel queries alarm firmware' Star?

  Our database of production with the projector of the analysis, discovered us the alarm 'parallel firmware of queries.
  
  As far as I understand it, this means that a query that is supposed to work in parallel using multiple PQ (parallel query servers) must be serialized by the absence of PQ.
  
  But the parallel server is disabled:
  
  < police = "Courier New" > < pre >
  SQL > show the parallel parameter
  
  < b > NAME < /b > VALUE TYPE
  fast_start_parallel_rollback string LOW
  parallel_adaptive_multi_user Boolean TRUE
  parallel_automatic_tuning boolean FALSE
  whole parallel_execution_message_size 2152
  parallel_instance_group string
  PARALLEL_MAX_SERVERS integer 8
  parallel_min_percent integer 0
  parallel_min_servers integer 0
  < b > < color = "#FF0000" > parallel_server boolean FALSE < / police > < / b >
  parallel_server_instances integer 1
  parallel_threads_per_cpu integer 2
  recovery_parallelism integer 0
  < / pre > < / make >
  
  That should be enough, but in addition, we have no tables with degree > 1:
  
  < police = "Courier New" > < pre >
  SQL > select the owner, table_name from dba_tables where degree > 1;
  no selected line
  < / pre > < / make >
  
  And not just any what session level parallelism.
  
  Our database is enterprise Oracle 10.2.0.5 on Solaris 10
  
  I have 2 questions:
  
  (1) does anyone know what causes the increase of Spotlight these alarm? ... maybe a confusion of Spotlight?
  
  (2) how can I find this information (downgraded to parallel queries) through SQL in the views v$ performance?
  
  Thanks in advance
  Alfonso

  Alfonso Vicente wrote:
  based on decommissioning operations, do you think we should parallel_automatic_tuning set to TRUE and the parallel_execution_message_size?

  Alfonso,

  These statistics show that some queries running on your database are not able to use the required level of parallelism - that's all. Since you have PARALLEL_MAX_SERVERS = 8, this means that even a single session executes a query with DOP > 8 (or 4 > in the case of redistribution of data) is inevitably to be decommissioned. It is bad or not and if it requires a few changes to the DB settings or not, depends only on your queries and how well their execution times are right now and you need some improvements or not.

• The ODI log level

  Hello
  
  I'm looking for a description of the levels of Log ODI.
  I know that the logging level controls the details of the log in operator ODI output, but that there is more detailed documentation?
  I need information such as what the details are displayed in what newspaper level.
  
  Thanks in advance!
  
  See you soon,.
  H.

  Hello

  There are five levels of monitoring:
  1 shows the beginning and the end of each session
  2 poster level 1 and the beginning and the end of each stage
  3. display of level 2 and each task performed
  4 shows the executed, SQL queries as well as level 4
  5. a full, often requested trace during a support call

  Thank you
  Fati

• How do I add to itunes library without duplicating files

  I have two computers and therefore two local iTunes library. A while back, I moved my iTunes Media on dropbox folder location, like that I could have one place two libraries would draw from. When I got new music I would like to import into a library as usual, and in order to get on the second library I was going to just come to 'Add to library' on the second computer and reselect the same iTunes Media folder. For longer, it would scan this folder and import only new music, however for some reason any now whenever I try to 'Add to library' on the second computer it begins to import duplicates of the entire library rather than just new music. Not sure if I changed the setting on this, or if it is a change caused by an iTunes update? Any help would be greatly appreciated.

  If you add a media to an iTunes iTunes library folder will ignore all media for which there is a reference specific dedicated location in the iTunes library file because it is already in the library. You see all the broken links! = What you say all your old references should all be showing broken links because you see everything add iTunes think it is different from that of the current storage location library tracks.

  This is the risk of using something like Dropbox for storing media.  I don't really know what is happening in detail and it is unlikely, that it has nothing to do with an iTunes updated since iTunes behaved this way since version 1.  Sometimes of storage devices what top-level network address needs such as NAS play this kind of question and Dropbox is certainly network.

• How to select the subfolders to sync photo

  How can I select subfolders to synchronize photos from my Windows PC to my iPhone from iTunes?

  For example, I have a folder of photos called "2016" contains many different folders of different holiday and I want only to synchronize one folder, not all.

  You can choose the parent folder, and then select what first level subfolders in this folder will be included. I've broken down my main library by date in the files of the form \yyyy\yyyy-mm. For synchronization of my devices, I have a folder of images separated with a limited number of records album that I can choose for each device. These files contain copies.

  TT2