What is neg 30 "error on the optical fiber

Similar Questions

• What tool would you use to create optical fiber cables?

  I created which, I hope, will be appropriate brushes to create what must be an accurate picture of vector of optical fiber.

  My question is, what steps you would use to make realistic fiber in adobe illustrator cc 2015?

  I tried the tool brush and pen. However, I found cutting an ellipse in half and using her own path is a good source.

  Thank you

  So two thoughts here. According to Visual processing, there are many approaches to making it. However, here are two things of Foundation that I consider important for you after your Visual processing is established.

  1. create the appearance you want. Below you can see I used a single path with several properties top STROKE in the appearance Panel. Press the button Add race in the pane appearance with this selected path and modify each stroke to get the look you want. Here I use 3 stroke properties. One is black and thick, the second is more thin and grey, and the last is a gradient on an attack of apoplexy that reflects the gradient on the path. Once you have created, select it and press the new button in the Panel of graphic Style. When you draw something, now click that graphic Style and it will make it the path for you.

  

  2. create an Art Brush with scale between the guides. In this way he traces a path with the art brush and always finish by the fibers of the end of your thread unaffected. Draw your image and drag it in the Panel forms. Choose Art Brush as the type, and then click OK.

  

  When the following options come up, then opted to evolve between the guides and drag the guide so you flush the part you want to not scale or adjust.

  

  Now, whenever you draw a path, choose this brush in the brush Panel and it will automatically draw with the part between the guides and add the endpoint without scales or distorted.

  

  Good luck

  Bunch of brand
  lifebypixels

• What does "HTTP 400 error. The request is malformed. "mean?

  Typed a web address and get above message. Another Member of the family using Firefox but does not get this error when you enter the same address. Tried to restart with disabled modules, but did not.

  Cleared the cache and it fixed.

• Error in the COLMAP clause. Column name not found

  Hi guys,.
  
  I must be missing something simple here, but I can't understand it. I have a very simple test, I am trying to make. Remap the 1 table column in the other on replicat.
  
  I created the file defgens.
  *
  * Definitions created/modified 2013-02-12 13:08
  *
  * Description of the areas for each entry in the column:
  *
  * 1 name
  * Data type 2
  * 3 external length
  * Fetch 4 Offset
  * Level 5
  * 6 level
  * 7 null
  * 8 so strange bump
  * Inner length 9
  * 10 binary length
  * Length of the table 11
  * 12 most significant DT
  * 13 least significant DT
  * 14 high precision
  * 15 little specific
  * 16 point elementary
  * Occurs 17
  * Column 18 key
  * Data type of void 19
  *
  *
  Definition of table of BILLING. B1
  Length: 92
  SYSKEY: 0
  Columns: 2
  B_ID 64 50 0 0 0 1 0 50 50 50 0 0 0 0 1 0 1 2
  B_F_NAME 64 30 56 0 0 1 0 30 30 0 0 0 0 0 1 0 0 0
  End of definition
  *
  Definition of table of BILLING. B2
  Length: 92
  SYSKEY: 0
  Columns: 2
  B_ID 64 50 0 0 0 1 0 50 50 50 0 0 0 0 1 0 1 2
  B_L_NAME 64 30 56 0 0 1 0 30 30 0 0 0 0 0 1 0 1 0
  End of definition
  
  
  I installed the replicat read the sourcedefs and remap the columns
  
  -Identify the Replicat group:
  REPLICAT rxtest
  -State that the source and target definitions are identical:
  -ASSUMETARGETDEFS
  SOURCEDEFS /u12/oracle/golden_gate_11_rep/dirsql/defgen_billing.sql
  -Delete the installation program
  DISCARDFILE u12/oracle/golden_gate_11_rep/dirout/rxtest.txt, SERVING
  SETENV (NLS_LANG = 'AMERICAN_AMERICA. WE8MSWIN1252")
  -Specify the database connection information as needed for the database:
  GG username, password
  -Specify the error handling rules:
  REPERROR (BY DEFAULT, ABEND)
  
  DDL EXCLUDE ALL THE
  
  Billing.b1, billing.r1 of the TARGET CARD,
  () COLMAP
  B_ID = id,
  b_f_name = what);
  
  Now, when I try and start replicat rxtest I get this error in the report.
  
  Resolved CARD (entry of BILLING. (B1):
  THE CARD BILLING. B1, TARGET billing.r1, COLMAP (B_ID = id b_f_name = what);
  ... (B_ID = id b_f_name = what...)
  ^
  Error in the COLMAP clause. Column name not found.
  
  Any ideas? Thank you

  And the ranking of the column names in your clause of colmap? If that is not reversed?

• Adapt the SC fiber connector to the switch SRW2048

  Try to replace switches 3Com Superstack II (3 16980) with Modules (3 16970) 100Base-FX with a Cisco solution. Connector fiber in the closet of network on both ends is a connector SC (photo attached). Which Modules, cables adapters I need connect to a switch SRW2048 to switch from one end one SRW2024 to another? This solution will offer a Gigabit connection on the optical fiber?

  I am looking to use SRW2048-K9-NA with MGBSX1 module to a closet and SRW2024-K9-NA MGBSX1 module in another cabinet at the other end of the fiber cable.

  I found an adapter cable that converts a SC male to a male of the LC and it seems it will work, but I have no experience with fiber. I have attached a picture of this card as well. It is listed online as - 1 ft cable to fiber optical adapter (male) LC to SC (female) Multimode Duplex 62.5/125

  Hi lbroering, it looks like it will be fine. Here is some information I found on the connecting cable you listed. It seems to be fine for a 1000base-sx, which should get underway with the SGBSX1 OK. This should provide a connection in concert as well. If you go through a Panel, you will have to probably ADJUSTABLE if the connection should be fine.

  -Tom
  Please mark replied messages useful

• What can I do about 48 error during the update of the iphone 4S?

  What can I do about 48 error during the update of the iphone 4S?

  Hello! Try the procedure described in section of the Apple Support below:

  Solve the iOS update and restore error in iTunes - Apple Support

• After removing system Antivirus care of my PC, I got an error message in function recycle something w / drive c. I clicked on OK and nothing of what is removed now appears in the Recycle Bin.

  After all functionss suggested or recommended to rid the SCA, I got an error messge something on recycling function was not in the c drive and I clicked OK. Now, when the Recycle Bin is opened after deleting without elements appear. Is there a correction/fix for this?

  Moved from feedback

  Original title: after having rid SCA from my PC I hade an error message in the function recycle something w / drive c. I clicked on OK and nothing of what is removed now appears in the Recycle Bin. This can be corrected?

  I'll have to check your other thread, but,.

  1. a single antivirus can be installed and running in real-time

  2. you can run malware and spyware like on DEMAND scanners only

  3. If you install MSE, all previous installed antivirus must be completely removed before installing mse

  4. Please read this checklist:

  http://experts.Windows.com/w/experts_wiki/89.aspx

  MSE installation checklist

• What is an application error, wmiprvse.exe? It keeps popping up all the time and its quite annoyinng. Can I get rid of him?

  What is an application error, wmiprvse.exe? It keeps popping up all the time and its pretty boring. Can I get rid of him?

  What this has to do with Windows Media?

  Rwillet,

  Thank you for visiting the Microsoft answers community.

  The wmiprvse.exe file is otherwise known as Windows Management Instrumentation.

  In research, I found a few articles that might help you:

  Windows wmiprvse.exe related errors

  Wmiprvse - wmiprvse.exe

  You can run your scan virus and if necessary, perform a System Restore to a point prior to the error occurring.

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error 303_will will not boot from the optical drive W / re disc

  Thanks for your time

  I have a pre Home HP G71 449WM computer PORTABLE PC WINDOWS 7 X 64

  I ran diag, he gave me (hard disk 1 (303) quick test full 10% complete)

  (305) full hard disk 1, HARD TEST drive has FAILED: what about hard disk

  failing or failed in any case, I changed the HARD drive for an ssd sata 2 and installed

  He also ordered the discs (3) of recovering formatted the SSD to another

  PC (primary healthy NTFS partition) No. DRIVE LETTER when formatted

  I loaded the 1st recovery disc in the optical drive, but it wouldn't start

  optical drive AND MY SCREEN IS WHITE

  the recovery disc are Moose HP (BDPX4721)

  THE SSD WORKED OK IN THE OTHER PC... ANY IDEAS WHAT I AM DOING WRONG?

  the printer has to do with boot_recovery_error 303

• What should I do to get the rundll error load it says this c:\windows\system32\swwagui.dll, but when I search it he says that it excist doesint

  What should I do to get the rundll error load it says this c:\windows\system32\swwagui.dll, but when I search it he says that it excist doesint

  yeremis,
  You don't need to download the help file.  So just follow the steps described in this article, that it will guide you through performing a clean boot.  The boot will start Windows without other programs startup.  This should stop any program that tries to use swwagui.dll.  Then you can go back and turn on startup one items at a time to determine which type of program is causing the problem.

  If the error persists while in a clean boot state then you should try a restore of the system forward when the problem started. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No history except the 2 update, I installed last night. What is a registry error?.

  When I go to windows update it tells me that no update was already installed. The update history page is white, except for the 2 updates, I installed last night. Update said earlier I have all the updates that are installed and there is no new update. I went to the windows update log in windows system 32 file and it lists all of my updates to the current, but will not display the update on the page history. I have hundreds of updates in the win sys. 32 journal update. This me puzzled because I'm savy on most windows problems, or, at least so far, I was able to fix most of the windows over the years since 2007. Am running Win Vista Home Service Pak 2 and all the other stuff seems to be ok except windows update. No history except the 2 update, I installed last night. Microsoft security essentials courses and a fix windows 3.5 way way back.  What is a registry error?.

  Original title: update windows

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  that includes "0x8024402C".

• Try to load software PhoneTree and I continue receiving ADODC error code. What should I do to install the software? How can ADODC error be corrected?

  Try to load software PhoneTree and I continue receiving ADODC error code.  What should I do to install the software?  How can ADODC error be corrected?  I have Windows VISTA

  Hello

  Thanks for posting your question in the Microsoft Community.

  From the description of the problem, you are not able to install a belkin wireless adapter. I'll be happy to help you on this question.

  You did changes to the computer before the show?

  Method 1: I suggest you to run the fixit from the following link:

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• After three days of my 3g modem works fine, I can't access the internet more because of what follows: "Error 734: the PPP Link Control Protocol was stopped.

  Last week for mobile connection, I bought a 3G modem on my laptop. After three days, works very well, I can't access the internet more because of what follows: "Error 734: the PPP Link Control Protocol was stopped. It occurs when I try to establish a Dial-Up connection.

  I searched the Internet and found a section of troubleshooting on the Microsoft Web site. However, although I have followed all the steps, the error continues. I've already uninstalled and again installed the program, does not. I use Windows Vista Home Premium.

  What should I do now?

  original title: 3 G Modem

  Hello

  I suggest you to contact your internet service provider for assistance.

• I try to install yahoo mesengerand it keeps giving me a pop-up Microsoft Windows.The error is the following: could not initialize properly (0xc0150002). What could be the problem?

  I try to install Yahoo Mesenger and it keeps giving me a pop-up Microsoft Windows.The error is the following: could not initialize properly (0xc0150002). What could be the problem?

  Hello DennisUSMC,

  Look at the thread in Yahoo Answers.
  http://UK.answers.Yahoo.com/question/index?QID=20091129190055AA1nEsp

  He suggested to uninstall other versions of Yahoo messenger before installing the latest version. If it does not help to solve your problem, then go to Yahoo support.
  http://help.Yahoo.com/kb/index?locale=en_US&page=product&y=PROD_MSNG&PIR=qWKr06VibUkWf.Qpynpw1MiIKLy_mnW1Xh_iz.es9b2DJRQQvLHTQmI

  Sincerely,

  Marilyn

• I continue to see a yellow triangle with! error on the page what is - this?

  original title: yellow triangle with!  error on the page what is - this?

  It just says: error on page... it's another page of my banking and the yellow icon appears on the pay Bill, and then I can't use this page...  How is it?

  Try the steps in the article

  http://www.ehow.com/how_4922612_fix-IE-error.html