HP Officejet 5740: after that 10 updated iOS, cannot print from the iPad

Similar Questions

• After installing new ink cartridge cannot print from ipad hp 5510 series

  Unable to print from the iPad after installing new ink cartridge in a printer hp 5510.

  I can print from the laptop based on windows.

  the two settled on a wireless router.

  Help!

  (I reinstalled the software, reset the wireless, reset the computer, the hp 5519 is listed as the default printer.)

  Thanks for your reply. I did all these things and more... Finally observed that the IP address of the printer was 2 'off' the IP address of the iPad numbers.

  I've corrected the printer IP addy... and viola.

  IPad and laptop computer are once more compatible with the printer.

  Appreciate your message...

  Louise

• Satellite L25 - after that Windows update is unable to use the Wi - Fi button

  I have a S-1193 Satellite L25, caught a virus, and after a windows update, cannot use wi - fi on the front button.

  What I have to do is disable the adapter, turn it on, then re-boot.
  If I turned off the computer, I di everything again.

  This will make the button work? Or is there a setting that is always on?

  Hello

  > after a windows update, cannot use wi - fi on the front button
  Do you mean the button that launches Internet Explorer?

  According to your message the laptop doesn't connect to the WLan automatically and you will need to connect it manual to get the job of WLan.
  Is this right?

  I put t know how you have connected the laptop to your router, but usually, if you own Windows WLan zero configuration then you should make sure that the parameters to a called + connect when this network is in range. +

  Welcome them

• Not able to boot after that windows update, just trying to install the number 3 setting 3, and then restart the computer. With the help of Windows Vista SP2

  Friday morning I wasn't able to boot my computer more. When I start my computer it won't seek to set a parameter nr 3 of 3. And then it restarts again. My computer tried to install some windows update settings the day before with no success. I Don t remember what it was. I got Vista SP2

  The same problem happends to my computer from friends four days, after she start a windows update installation. But it has solved its problem by using the Windows installation CD and use the repair tool.

  For me, my Windows installation CD I got from Dell does not work. Not the tool repair or startreparation. And I have no reference system to return.

  What should I do? I don't want to reinstall windows again, I have a lot of information on the computer I need to.

  All the world has noticed this problem?

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the ISP above Mathods to solve your problems, save your data using one of the methods below, and then reinstall Windows:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• After that windows update computer now hangs at the login screen, no error message, just restarts.

  I have tried safe mode, does the same thing; tried to use the Windows Vista disc to do a repair, no luck; also I tried restoring the system (from disk), no restore points however.
  The problem appeared after restarting the computer during the night.  The problem began to be able to connect, but the screen would go blank with just a pointer (KSOD).  Has tried some of the suggestions on this problem, including by eliminating sys newspapers, which did not work as well as reinstalling the video driver, with no luck.  Finally tried a system restore, returned 1 week (before the windows updates).  Now, the computer becomes just the login screen sits there for about 5-10 seconds then restarts immediately.

  I just had this happen to my laptop that has no external references. This is a new (September 09) ASUS K50ij with Vista 64-bit installed. I bought the Win 7 OS to replace, but have been waiting for the time to play with it... Last Monday, the update itself and invited to restart so I have done what I was busy with and enabled him to restart which is the only thing to do now... restart, the blue screen for a nano-second, then restart... etc. Same problem with safe mode and safe mode with networking, or with the box... anyway, someone very smart recommended that I use another computer (Fortunately, I have several) to download free Imgburn (which works easily), then get Ubuntu (Linux Operating System free download) burn image from the Ubuntu disc, put the disc in the drive of the computer crashed (there is a little hole next to the button you) can insert in a safety pin to release the door when the power is off) change the setting in the BIOS of the computer has crashed by restarting and pressing F2 until you get the menu BIOS... go to the start menu and choose Start from the CD, and then press ENTER. When the computer starts, it will see the drive and go to a menu to select the language, then next choice is "try Ubuntu without making any changes to the computer. It will boot the disk and allow you to view and copy ALL your files off the power on an external drive, which is what I did... including my Outlook .pst files that include all my saved emails my calendar and contacts, etc! WOOHOO! has got all my photos, documents, etc. The only thing that I didn't know how to get is my favorite... How to enter in the browser from another computer.

  If after this, an hour or more than make sure I got all the important data... I decided to see if anyone had a solution to this problem just fixing... I probably won't update again because Microsoft sends them and offers no solutions to the problems they have caused and nobody pays me for all the time I've lost get to get my stuff back and also to solve the problem they have caused. A update on my other laptop Win 7 zapped my outlook program and even reinstall it didn't solve this problem, even more work to do there, but looking in the files using Ubuntu's File Explorer, I found a hidden file that is used to repair the files .pst outlook called scanpst, or something that nearby.

  In any case, if someone has a solution to uninstall the recent update or to determine how it corrupted my user profile (which is the general consensus) please let me know.
  Thank you and good luck to you!

• After that Windows Update Setup, I can access the internet.

  Internet drivers knocked out by windows update

  updated Windows pack hit my driver from the internet, I have a Hp pavillion deskstop... need help to log on the internet... I have a strong signal, a cable ethernet and "limited access", but not internet pages will open... I have a laptop to connect... Thanks Robert

  Hi Robert,.

  You receive messages or error codes?

  You can try to uninstall and reinstall the network adapter drivers and check.

  a. click Start and type in Device Manager in the start search and press enter.

  b. expand the network adapters in the Device Manager

  c. right-click on the device and click Properties

  d. click on Driver tab and click on uninstall the drivers and click OK.

  e. restart the computer and check.

  We can also refer to the computer or the device manufacturer's Web site and try to update the latest version of the network drivers.

  Updated a hardware driver that is not working properly

  Also check out the following link and check:

  How to troubleshoot network connectivity problems in Internet Explorer

• HP Officejet Pro 8610: Cannot print from the HP ePrint app on the Internet

  Hello

  I try to print using the HP eprint on my Android mobile application. I am able to print using the WiFi on my phone but when on the go, the app will not find the printer. The eprint service works correctly since I can print when sending an email to my address of email eprint even when I travel but the application won't work when the printer of the Internet access. The printer is connected to a cable modem, wireless. Is there a way to print through the Internet using the HP ePrint app?

  Thanks in advance

  Well after I asked a few friends with iPhones and Android devices to print over the Internet using the application, I noticed that everyone could.

  So, initially, I reset the printer to the factory setting and reconfigured it. It has resolved all the issues I've had both with built in the application to manage as well as my phone. Now I can normally use the HP ePrint app on the internet and printing.

  As a side note, I downloaded an update of the firmware to the printer and most probably caused problems, but, as says the resolved all factory reset.

  See you soon

• HP Officejet Pro 6830: 6830 windows 8 8.1 cannot print from the windows test page

  When it is connected to 'own' windows - it prints OK.

  When it is connected to the windows where are the normal software like office, autocad, adobe and so those installed, the printer does not print anything - test page from printer properties is the first problem that means...

  Only "free software priter" is able to print something (test pages and so one) also print doctor and installation wizzard prints what it can, but not possible 'to normal windows print"... :-(

  It is tested on:

  Software for laptop - Win 8 Pro - installed - no. PRINT

  Surface 3 Pro - Win 8.1 - software installed - no. PRINT

  Laptop - 8.1 Pro - clean shop - PRINTING POSSIBLE Win (after installation of the driver full download - in a test with autopilot installed it does not print)

  Virtual - Win 7 Ultimate - installed software - PRINTING POSSIBLE

  (installed software means office, autocad, adobe,...)

  It seems that some components of system installed with one software disables printing from windows.

  When looked at open before printing to the printer - it shows the print job (which is not printed) for 0.1 second and nothing is displayed - also when the printer is paused - it shows the work and it is deleted immediately - left must work until the printer not suspended...

  It is not a firewall issue (tested), it has been tested on: USB, WiFi, LAN. No way to print something from windows 8 and upwards.

  seems that it has something with the option run the program as administrator.

  tested on some programs - autocad, adobe, word excel,... - when run as administrator it prints OK.

  If you do not have the option in the context menu try to hold Shift before made a - right click and run as admin

  It's odd - some print settings are transferred with work, for example, winword impression (office) without admin - PDF Factory (virtual printer) - rights and then to the physical printer 6830 - he can't be printed to PDF Factory

  But if you start winword as an administrator - so you can print directly or through PDF Factory hassle

  ---------------------------------------------------------

  Personally, I see this as a big mistake by Microsoft - that something like this can happen - simple direct printing is not possible after you have connected the printer... :-(:-(:-(

• How I fix Bitmoji after that 10 updated iOS

  Just deactivation and reactivation of the Bitmoji keyboard in settings did not work for me. Here's what I did:

  To get the application Bitmoji to start working again in the Messages, I took the following steps:

  Settings > general > keyboard > keyboards - slide left on keyboard Bitmoji to delete really.

  Then, I selected "Add a new keyboard" and selected Bitmoji. Now its works well!

  I've done that 5 times and it still does not! If all goes well, they have an update soon!

• After that I updated my lightroom, it shows the problem in opening, asked permission and I am not able to solve the problem, can u please help me in fixing it

  This morning, I was asked to update the lightroom and photoshop, and after update of applications, photoshop runs correctly, but lightroom is having a problem, when I opened the bright room, a dialog box appears and it says-lightroom doesn't have permission to write to certain folders to standard user. Please click the 'fix to continue' to give permission.

  I tried, but could not solve the problem.

  can u please help me solve the problem.

  Thank you

  Hi rabinp

  You must change the permissions for the folder Adobe.

  Please see the discussions below to fix it.

  Update on CC (for PS, LR and bridge) online and met a permissions problem with LR on three files?

  I've updated to Lightroom cc and now I have problems with permissions... How do I rectify this? I followed the instructions online, but I can't change the preferences folder permission to read and write.

  Doc to help Apple for permission change: OS X El Capitan: set permissions for items on your Mac

  Let us know if that helps.

  Kind regards

  Mohit

• update of firmware for ofcjet 8500 power print from the ipad

  I want to be able to print from my iPad 2 since my 8500 office jet all-in-one wireless

  What 8500 do you own? As in, what is the model number?

• 7500 a OfficeJet won't print from the Internet

  My printer portable e-all-in-one Officejet 7500 a wide can suddenly will not print on the Internet after that only three years ago. What could be the problem and how to fix it?

  Thank you very much for this information.  Welcome to the forums.  Have you tried using another browser?  Like, if you use Internet Explorer from now (blue e icon), try Google Chrome or Firefox or vice versa.  So it is rare that you get a problem where you cannot print from the internet it is likely an internet option.  You can go to tools > > Internet Options > > and see what your security settings are defined on (they are maybe too high).

  You can also click on the button "print...". "and see which printer is trying to print or to search for error messages.

  Once again, this is general advice only.  If you would like more information, I have to know the name of the web browser you are using (IE10, Chrome, Firefox, etc.) just so I can give you more details because I'm always happy to help you.

• How to print from my ipad to the officejet 6500 has more?

  I read that there may be something else than necessary. I want to print directly to the Officejet 6500 has more. Apple said ths is an Air Print printer able to do this. I don't take this monster out of the box until I know he will do what I want without a lot of trouble. Thank you.

  OK, so you were talking about requiring the update.  It is difficult to say that all depends on if it came with the new firmware or not.  It is not really relevant, however, because it will be updated as soon as Web Services.  This process takes a few minutes.  There is no computer necessary for the update of the firmware as long as the printer has internet access (which is directly connected to a router via ethernet or wireless).  Yes, a connection ad hoc, you will be able to print from the iPad, but you can use its 3 G connection instead of through your router.  It can only support a single WiFi also.  Go ahead and set up the printer and keep me posted on what happens.

  BTW - what is the problem with your PC that it cannot access the internet?

• Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

  Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

  Hello

  The following steps may help:

  • Restart your iPhone and your watch, both turn off together, and then restart your iPhone first:
    • Restart your iPhone, iPad or iPod touch - Apple Support
    • Restart your Apple Watch - Apple Support
  • Disable the twinning and re - pair your watch:
    • The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
    • Set up your Apple Watch - Apple Support

• My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  What can I do?

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows