series PCI and ocy port driver easy serial port can not get driver Windows 7 Professional

Similar Questions

• Need 16 to 115 200 serial ports, can not get more 8 then

  I try to get 16 to 115 200 serial ports send/receive data. I have a NI PCIe-8431/16 (RS-485/422).

  I managed to get 8 ports will at the same time but not anymore. I tried 9 ports at a time and I get timeouts on port 9.

  PC: Dual core 2.4 GHz, 4 GB of Ram. I'm not more taxing on the CPU, I mean its 115 200 what treatment he would need.

  I'm already talking with OR to the care, but so far they don't have a definitive answer of fix. I thought that maybe windows XP can handle 8 ports?

  I also tried to use 8 of 16 channels and 1 another card 4 ports, I've had. Always the same results. I can do 8 simultaneous connections, sending data. and it seems that I can get the 9th to send to 2400 baud, but when I switch to port to 115 200 speed it fails / timesout?

  More information about my project: I am trying to update firmware on 16 devices at once. To 115 200, it takes 6 minutes to push all the code of the device.

  Process is: 2400 baud get version and check if a new version is necessary. 2400 baud say im switching machine for 115 200 2400 baud response. 115 200 baud send start download receive response to 115 200 baud rate. Send the bytes start and spell then line of the file at a time. Send end. done bytes.

  Anyone know of possible limitations under XP or with the device OR? Any help or idea would be apreciated.

  worst case I limit to 8 at a time. which is useless then. Might as well buy a controller at 8 ports and make a smaller device...

  Well, I fixed my problem with the help of using NI SPY on serial ports. Thanks for this idea of troubleshooting, first time I had to use or spy.

  First problem was my 100msec device timeout of 2400 baud to 115200 baud of switching. I added a loop for, 5 time, delays from 20msec (total 100msec) to send 'start download' and also to receive a response, after the transmission change. This allowed the unit to wait for firmware.

  Then I noticed that I had a ton of failure during the download. Process is send receive some line of code 0 x 01 that the code was excluded, then send the following line of code. If she gets 0 x 01 has not received or 0x02, and then send it again (forever if you want, well I think that several seconds until the device stops data receiver)

  My problem here is that I sent the data line, then read 1 byte. Timeout is set to 500msec. My code would get a timeout, so I'll send the data once again, since I have not received of 0x01. For some reason, it does not. After that I get the timeout I can't send/recieve on this port. I have then close and restart.

  Fix was a loop (20 times?) for 500 msec and check the receive buffer. If the receive buffer is empty after 500msec I try again. If the receive buffer has data then I read and check to 0x01. If I don't get 0x01 I try again. Otherwise, send the following line of code. It works very well.

  Finally, I can picture 16 devices in less than 7 minutes. This should normally be one at a time for 7 minutes each using a matrix of series 48.

  Next challenge 48 serial ports!

  Thanks for the help.

• I downloaded fbdownloader and now have an oproblem with the opening with other Web sites and a link to firefox that I can't get rid window randomly

  I downloaded fbdownloader and after having done it, I noticed changes in my facebook and I'm getting random webpages popping up on the new windows. There is a link on my facebook that I can't get rid of and I uninstalled this program but seems there is persistent things that I can't get rid of. What can I do?

  In fact finally found the answer here. When I downloaded the software fbdownloader, it installed other things. Something viral tube and another similar to google search engine, but not google. forget the name but once I removed and unenabled them everything was back to normal. Too bad keep what might have been a good free program that they attach themselves to the crappy stuff

• When I turn on a theme, the theme is displayed but when I close firefox and reopen the topic disappears. I can not get a stay as default theme. Any ideas?

  I downloaded and installed the various themes, when I am asked to close and restart firefox I do and the theme appears to turn it back on. However, if I then close firefox from myself and then re - start, the theme disappears and is returned to the "Default 16.0.2. Even if I go to the Add-ons Manager and select appearance, the 16.0.2 default theme is disabled and my required theme is enabled, but the default 16.0.2 is the only theme that works.

  where to download the theme.

  Go with Firefox Personas to www.getpersonas.com

• 0x800CCC17 error number. Can not get into Windows Mail. System username and password issues

  No detail of password change is obvious, so no access.  Just looks like a mistake.

  Sometimes, that is.  Try to delete the account, and then compact and repair the database (www.oehelp.com/WMUtil/), and then add the account back again.

  Steve

• I had to replace my hard drive and can not get my Photoshop CS2 9.0.2 to activate.  I tried the phone and the Web site and have both the serial number

  I had to replace my hard drive and can not get my Photoshop CS2 9.0.2 to activate.  I tried the phone and the Web site and have two serial numbers.  I can't find a number that strives to speak to a live person at Adobe.  I need to reduce the size of the pixel today on some photos and need the program.  Is there another way to reduce pixel if I can't get my Photoshop runs today?

  See the page linked below.  Your installation/serail number will not work.  You need to acquire a download for it with a specially assigned serial number...

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• My hard drive is damage and the deleted product key sticker how can I reinstall my windows vista if I don't even have a cd/dvd to reinstall?

  How can I install windows vista on a new hard drive?

  I have a toshiba satellite L505D-S5965 my HDD is damage and the deleted product key sticker how can I reinstall my windows vista if I don't even have a cd/dvd to reinstall

  In this case, it is preferable to contact Toshiba support and discuss the issue with them. They may be able to send you DVD.

• I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  See the following article:
   
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

  Make sure your network connection is working and properly configured.

  You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
   
  In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
   
  1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
   
  2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
   
  3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
   
  4. Select "Network adapters" under common hardware types, and then click Next.
   
  5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
   
  6. click Next and follow the remaining instructions.

• I accidentally loaded a .iso file on my PC and can not get rid of it. When I try to delete the file it says that the file is opened by the system. Also the file created 3 virtual drives like E:, F: and G: __Please let me know how I can remove this .iso

  I accidentally loaded a .iso file on my PC and can not get rid of it.  When I try to delete the file it says that the file is opened by the system.  Also the file created 3 virtual drives like E:, F: and G:
  Please let me know how I can remove this .iso file.

  Try Safe Mode. Repeatedly press the F8 key as the computer starts getting the menu diagnosis. Use the arrow key to select Mode without failure. MS - MVP - Elephant Boy computers - don't panic!

• My DVD/CD drive does not work in Windows 8 Professional, and it ISN'T a hardware problem.

  My DVD/CD drive does not work in Windows 8 Professional with or without data or audio in it. However, if I turn off the PC with a bootable CD/DVD in there, the PC recognize the media and initiate the CD when turned on. This confirms that the DVD/CD drive actually works, but for some stupid reason, Microsoft Windows 8 Professional will not recognize the same DVD/CD player it loaded since! Thanks again Microsoft for another product of shit. Now, how are you going to fix this? And how are we supposed to run things such as WordPad or paint, etc. I predict that Windows 8 will fall faster than Windows Me!

  Hello

  To access all applications - just right-click anywhere on the splash screen - the lower right corner
  -All Apps - scroll to the left to learn more. You can pin any application to the start screen - right
  Click on - to start pine.

  It is a real help:

  Windows Store - Top free - Windows 8 Cheat Keys

  While on the screen type start - Help

  Or Win Key Q plus Apps search - help

  Or charms - Search - Apps - Help Menu

  After that the foregoing-> on left click-> Help and Support.

  ==================================

  Solution Windows 8 - left Center - learn more
  http://support.Microsoft.com/GP/Windows-8

  Meet Windows - a good start
  http://Windows.Microsoft.com/en-us/Windows-8/meet

  ====================================================
  ====================================================

  It was an upgrade of Windows 8 or you you destroy the old operating system and
  do a full install? Are there any error messages?
  
  Check the Compatibility Center to see if the drive is compatible:

  Windows Compatibility Center
  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

  Check with the manufacturer of the system support, their documentation online and pilot/firmaware,
  and ask questions in the forums (if any) on known problems. Some CD/DVD players are not
  Windows compatible 8.

  ---------------

  From the desktop - WINDOWS key + D while on the screen start to access the desktop:

  WINDOWS key + X or build the mouse in the lower left corner right click and corner - command prompt (ADMIN)

  Enter it below (or COPY and PASTE):

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  RESET
  (from AtishayMSFT)

  -------------------------------------------------------------------------------------

  -Use and you need to use it again after trying the methods below.

  What happens if a device is not installed correctly? (Run the hardware and devices Troubleshooter)
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Starting from the command prompt from the desktop - Windows key + X - (Admin)

  SFC/scannow
  (space between C and /)

  Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)

  Windows key + X - command prompt (Admin)

  Chkdsk /r
  (space between the k and /)

  Or run CheckDisk in Windows 8:

  Improve performance by optimizing your hard drive - see "to repair a drive.
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  --------------------------------

  Windows key + X - Control Panel

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack

  ====================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  =====================================

  Expert help with CD/DVD drive issues available here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I bought the upgrade to Lightroom 6, downloaded the dmg file I put the serial number and I get the message: THIS SERIAL NUMBER can NOT BE INVALID what do I do?

  I bought the upgrade to Lightroom 6, downloaded the dmg file I put the serial number and I get the message: THIS SERIAL NUMBER can NOT BE INVALID what do I do?

  Hello

  Please see: -.

  Impossible to validate the serial number

  Error failed to validate the serial number | CS6

• Try to download adobe creative suite 6 standard design and he said that my serial number is not valid. What should I do?

  Try to download adobe creative suite 6 standard design and he said that my serial number is not valid. What should I do?

  Error "serial number is not valid for this product". Creative Suite

• I just downloaded photoshop elements 7.0 to a new box, and he said that my serial number is not valid.  the adobe support team indicates the number is valid, but that they cannot help me

  I just downloaded photoshop elements 7.0 to a new box, and he said that my serial number is not valid. the adobe support team indicates the number is valid, but that they cannot help me

  who cancel. Ugh... it was one of the other programs in the bundle of bamboo that was having a problem.  Thanks again for responding, I think I'm now covered for photoshop elements.

• I use the older style firefox and can not get the password manager to remember one of my passwords, how can I do this

  I use the old style Firefox browser and can not get the password manager to remember a password of my main site. How can I do this?

  Thanks for the advice, I went to another program... Last time... and saved my passwords with it. I find it easy to use and non-intrusive, and it has several features that are very convenient for me.

• I can work between my Mac and iPad, but can not get my iphone to receive transfers?

  I can work on spreadsheets Numbers between my Mac and iPad, but can not get my iphone to receive transfers?  The numbers icon at bottom left of the screen, but none of my worksheets appear on my iPhone.

  Did you numbers is synchronization correctly via iCloud on your iPhone?  You could check that the connection of numbers to iCloud is turned on at two places:

  Settings > iCloud > iCloud Drive > numbers

  and,

  Settings > numbers > use iCloud

  SG